Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.

Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.

Displaying 1 - 10 of 249
Filtering by

Clear all filters

133353-Thumbnail Image.png
Description
This research compares shifts in a SuperSpec titanium nitride (TiN) kinetic inductance detector's (KID's) resonant frequency with accepted models for other KIDs. SuperSpec, which is being developed at the University of Colorado Boulder, is an on-chip spectrometer designed with a multiplexed readout with multiple KIDs that is set up for

This research compares shifts in a SuperSpec titanium nitride (TiN) kinetic inductance detector's (KID's) resonant frequency with accepted models for other KIDs. SuperSpec, which is being developed at the University of Colorado Boulder, is an on-chip spectrometer designed with a multiplexed readout with multiple KIDs that is set up for a broadband transmission of these measurements. It is useful for detecting radiation in the mm and sub mm wavelengths which is significant since absorption and reemission of photons by dust causes radiation from distant objects to reach us in infrared and far-infrared bands. In preparation for testing, our team installed stages designed previously by Paul Abers and his group into our cryostat and designed and installed other parts necessary for the cryostat to be able to test devices on the 250 mK stage. This work included the design and construction of additional parts, a new setup for the wiring in the cryostat, the assembly, testing, and installation of several stainless steel coaxial cables for the measurements through the devices, and other cryogenic and low pressure considerations. The SuperSpec KID was successfully tested on this 250 mK stage thus confirming that the new setup is functional. Our results are in agreement with existing models which suggest that the breaking of cooper pairs in the detector's superconductor which occurs in response to temperature, optical load, and readout power will decrease the resonant frequencies. A negative linear relationship in our results appears, as expected, since the parameters are varied only slightly so that a linear approximation is appropriate. We compared the rate at which the resonant frequency responded to temperature and found it to be close to the expected value.
ContributorsDiaz, Heriberto Chacon (Author) / Mauskopf, Philip (Thesis director) / McCartney, Martha (Committee member) / Department of Physics (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133368-Thumbnail Image.png
Description
Supernovae are vital to supplying necessary elements to forming bodies in our solar systems. This project studies the creation of a subset of these necessary elements, called short-lived radionuclides (SLRs). SLRs are isotopes with relatively short half-lives and can serve as heat sources for forming planetary bodies, and their traces

Supernovae are vital to supplying necessary elements to forming bodies in our solar systems. This project studies the creation of a subset of these necessary elements, called short-lived radionuclides (SLRs). SLRs are isotopes with relatively short half-lives and can serve as heat sources for forming planetary bodies, and their traces can be used to date stellar events. Computational models of asymmetric supernovae provide opportunities to study the effect of explosion geometry on the SLR yields. We are most interested in the production of \iso{Al}{26}, \iso{Fe}{60}, and \iso{Ca}{41}, whose decayed products are found in our own solar system. To study the effect of explosion asymmetries in supernovae, we use TYCHO stellar evolution code, SNSHP smooth particle hydrodynamics code for 3D explosion simulations, Burn code for nucleosythesis post-processing, and Python code written to analyze the output of the post-processing code.
ContributorsJohnson, Charlotte (Author) / Young, Patrick (Thesis director) / Lunardini, Cecilia (Committee member) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
135211-Thumbnail Image.png
Description
We hypothesized that recurrent exposure to a temporal discounting task would habitize participants, so that they become insensitive to framing effects. Temporal discounting is a behavioral trend which describes how people discount the value of a reward dependent on the time until receipt. Participants completed a temporal discounting task weekly

We hypothesized that recurrent exposure to a temporal discounting task would habitize participants, so that they become insensitive to framing effects. Temporal discounting is a behavioral trend which describes how people discount the value of a reward dependent on the time until receipt. Participants completed a temporal discounting task weekly for five weeks, to promote formation of a habitual decision strategy. Concomitant with this, we expected that people would shift their decision process from a deliberate, goal-oriented approach that is sensitive to changes in reward outcomes and environmental context, to a simplified, automatic approach that minimizes cognitive effort. We expected that this shift in decision strategy would be evident in a reduced influence of contextual effects on choice outcomes. We tested this hypothesis by leveraging two framing effects \u2014 the date/delay effect and the decimal effect. Consistent with our hypothesis, we find that the date/delay effect is significant on week 1, shows significant changes in week 1 to week 5, and is no longer significant on week 5. The results for the decimal effects were not significant. We discuss these results with respect to the cognitive processes that underlie temporal discounting and self-control.
ContributorsSt Amand, Jesse Dean (Author) / McClure, Samuel (Thesis director) / Sanabria, Federico (Committee member) / School of Molecular Sciences (Contributor) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
135378-Thumbnail Image.png
Description
A problem of interest in theoretical physics is the issue of the evaporation of black holes via Hawking radiation subject to a fixed background. We approach this problem by considering an electromagnetic analogue, where we have substituted Hawking radiation with the Schwinger effect. We treat the case of massless QED

A problem of interest in theoretical physics is the issue of the evaporation of black holes via Hawking radiation subject to a fixed background. We approach this problem by considering an electromagnetic analogue, where we have substituted Hawking radiation with the Schwinger effect. We treat the case of massless QED in 1+1 dimensions with the path integral approach to quantum field theory, and discuss the resulting Feynman diagrams from our analysis. The results from this thesis may be useful to find a version of the Schwinger effect that can be solved exactly and perturbatively, as this version may provide insights to the gravitational problem of Hawking radiation.
ContributorsDhumuntarao, Aditya (Author) / Parikh, Maulik (Thesis director) / Davies, Paul C. W. (Committee member) / Department of Physics (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
135339-Thumbnail Image.png
Description
Observations of four times ionized iron and nickel (Fe V & Ni V) in the G191-B2B white dwarf spectrum have been used to test for variations in the fine structure constant, α, in the presence of strong gravitational fields. The laboratory wavelengths for these ions were thought to be the

Observations of four times ionized iron and nickel (Fe V & Ni V) in the G191-B2B white dwarf spectrum have been used to test for variations in the fine structure constant, α, in the presence of strong gravitational fields. The laboratory wavelengths for these ions were thought to be the cause of inconsistent conclusions regarding the
variation of α as observed through the white dwarf spectrum. This thesis presents 129 revised Fe V wavelengths (1200 Å to 1600 Å) and 161 revised Ni V wavelengths (1200 Å to 1400 Å) with uncertainties of approximately 3 mÅ. A systematic calibration error
is identified in the previous Ni V wavelengths and is corrected in this work. The evaluation of the fine structure variation is significantly improved with the results
found in this thesis.
ContributorsWard, Jacob Wolfgang (Author) / Treacy, Michael (Thesis director) / Alarcon, Ricardo (Committee member) / Nave, Gillian (Committee member) / Department of Physics (Contributor) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
136661-Thumbnail Image.png
Description
A series of mitochondria targeting probes was synthesized for the purpose of exploring the feasibility of a mitochondria targeting fluorescent sensor. Of the probes, the probe with a two carbon spacer showed the best co-localization from staining with the established MitoTracker Red® FM, indicating a potential development of the probe

A series of mitochondria targeting probes was synthesized for the purpose of exploring the feasibility of a mitochondria targeting fluorescent sensor. Of the probes, the probe with a two carbon spacer showed the best co-localization from staining with the established MitoTracker Red® FM, indicating a potential development of the probe into mitochondria targeting sensor. However, cytotoxicity was observed for the probe with a six carbon spacer. Three additional mitochondria targeting fluorescent probes of longer spacer groups were synthesized, but the cytotoxicity was not observed to be as high as that of the probe with a two carbon spacer. The cytotoxicity was characterized to be that of caspase dependent cell death. To screen for a possible effect on apoptosis due to the mitochondrial probe, three fluorescent fusion proteins binding the anti-apoptotic proteins were designed and expressed. Each purified fusion protein was then incubated with the cytotoxic mitochondrial probe, and the mixture was isolated by running an affinity column. The fluorescence analysis of eluted fractions showed preliminary data of possible interaction between the protein and the mitochondrial probe.
ContributorsLee, Fred (Author) / Meldrum, Deirdre R. (Thesis director) / Tian, Yanqing (Committee member) / Zhang, Liqiang (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor) / Department of Chemistry and Biochemistry (Contributor)
Created2014-12
136792-Thumbnail Image.png
Description
In fan fiction, fans utilize different elements in an original work and incorporate them into their fanfics; elements such as the characters and setting of an original work are frequently used in fan fiction. A different element is investigated: time travel. The physics behind time travel is not yet understood,

In fan fiction, fans utilize different elements in an original work and incorporate them into their fanfics; elements such as the characters and setting of an original work are frequently used in fan fiction. A different element is investigated: time travel. The physics behind time travel is not yet understood, so authors have to create their own time travel physics in their works to account for this lack of understanding. Therefore, for fan authors to incorporate time travel into their fanfic, they must study the time travel physics in the original work the same way that characters from an original work are studied. Three original works and three fanfics are examined: the television show My Little Pony: Friendship is Magic and its fanfic "The Fall and Rise of the Alicorn", the Harry Potter book series and its fanfic "Back to the Time of the Unknown", and the webcomic Homestuck and its fanfic "Like a Bug on a Windshield".
ContributorsClark, Michael Robert (Author) / Ingram-Waters, Mary (Thesis director) / Scott, Suzanne (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Department of Physics (Contributor)
Created2014-05
136795-Thumbnail Image.png
Description
An in-depth analysis of Homeview Realty and Homeview Financial was conducted. A marketing plan for both companies was prepared for this project. Homeview Realty and Homeview Financial are in the midst of dynamic industries. The landscape of doing business in the real estate and mortgage industries are constantly changing and

An in-depth analysis of Homeview Realty and Homeview Financial was conducted. A marketing plan for both companies was prepared for this project. Homeview Realty and Homeview Financial are in the midst of dynamic industries. The landscape of doing business in the real estate and mortgage industries are constantly changing and evolving. Thus, it is vital for Homeview Realty and Homeview Financial to constantly be knowledgeable in these fields. With this dynamic aspect, the landscape for marketing has also changed; it became digital in nature. Thus, it is important to analyze Homeview Realty and Homeview Financial currently and create a live marketing plan that can be updated when needed. With a marketing plan in hand, Homeview will be able understand its business model, mission, goals, and objectives and in turn be able to create marketing campaigns compatible with the companies objectives and strategic directions.
ContributorsCrowley, Rachel Victoria (Author) / Ostrom, Lonnie (Thesis director) / Montoya, Detra (Committee member) / Mirshak, Paul (Committee member) / Barrett, The Honors College (Contributor) / Department of Marketing (Contributor) / Department of Supply Chain Management (Contributor) / Department of Chemistry and Biochemistry (Contributor) / Department of Finance (Contributor) / School of Accountancy (Contributor)
Created2014-05
136583-Thumbnail Image.png
Description
Repeating tiles made of DNA were used to try to form an indefinitely large structure. Both the tiles and structure were 2D. Two different patterns were tested, one corrugated and one not. Corrugation means that the tiles alternated between facing up and facing down, canceling out any curvature to the

Repeating tiles made of DNA were used to try to form an indefinitely large structure. Both the tiles and structure were 2D. Two different patterns were tested, one corrugated and one not. Corrugation means that the tiles alternated between facing up and facing down, canceling out any curvature to the tile and creating a slightly corrugated but largely 2D pattern. Annealing methods were also experimented with. Annealing the structure in two, separate steps as opposed to one was tested. Another experiment was comparing cyclic versus linear annealing. A linear decrease in temperatures defines the linear annealing, and a cyclic method involved a linear drop to a certain temperature, followed by a slight increase in temperature and cooling back down again. This cycle is done several times before it continues linear cool down. It was seen that both corrugated and non-corrugated structures could be made. In both cases tiles that make up a larger section of the overall pattern were more successful. This is especially important for the non-corrugated pattern. Linear and 2step annealing methods seem to yield the best results.
ContributorsHunt, Ashley Elizabeth (Author) / Yan, Liu (Thesis director) / Yan, Hao (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor)
Created2015-05
136613-Thumbnail Image.png
Description
The influence of mix design on the structural properties of FAU-type (faujasite) zeolite was studied. Samples were synthesized in a forced convection oven using various proportions of coal fly ash, sodium hydroxide (NaOH), and sodium chloride (NaCl). Three faujasite varieties, labeled X, P and S, were prepared for each mix

The influence of mix design on the structural properties of FAU-type (faujasite) zeolite was studied. Samples were synthesized in a forced convection oven using various proportions of coal fly ash, sodium hydroxide (NaOH), and sodium chloride (NaCl). Three faujasite varieties, labeled X, P and S, were prepared for each mix design. Samples were characterized using Fourier transform infrared (FT-IR) spectroscopy and thermo-gravimetric analysis (TGA). Mercury intrusion porosimetry (MIP) was used to obtain porosity information on the samples. Mechanical strength testing was performed on solid blocks of the zeolite samples prepared in a mold. It was found that the S variety in mix design (iv) had the most desirable balance of porosity and strength for engineering applications.
Created2015-05