Barrett, The Honors College Thesis/Creative Project Collection
Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.
Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.
Displaying 1 - 10 of 29
Description
Pacemakers in the early 1970s were powered by betavoltaic devices which provided long lasting battery life. The betavoltaic devices also emitted gamma radiation due to inadvertent radioisotope contamination, which could not be completely shielded. The betavoltaic devices were quickly replaced by lithium batteries after their invention, and betavoltaics were abandoned. Modern technological advancements made it possible to isolate beta emitting radioisotopes properly and achieve better energy conversion efficiencies which revived the topic of betavoltaics. This research project has studied state-of-the-art pacemakers and modern radioactive power sources in order to determine if modern pacemakers can be safely nuclear powered and if that is a reasonable combination.
ContributorsAwad, Al-Homam Abdualrahman (Author) / Holbert, Keith (Thesis director) / Aberle, James (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2014-12
Description
This manual provides a "how-to" framework for the development of a student-run clinic. The manual should be used as a resource, referring to the table of contents and summaries of topics for specific areas of interest. The manual details the phases for the development of a student-run clinic focusing on underserved populations. The Student Health Outreach for Wellness (S.H.O.W.) Community Initiative in Phoenix, Arizona serves as the example. S.H.O.W. represents just one type of clinic structuring. As such, it is important to realize when developing a clinic that there are numerous clinic approaches based on community needs, volunteer support, and funding.
ContributorsWheeler, Shannon Christine (Author) / Thompson, Pamela (Thesis director) / Gaughan, Monica (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2014-12
Description
Generally, increasing the electrical size of an antenna will increase the directivity of the antenna. In the case of an array of identical antennas with uniform spacing, the electrical size can be increased by increasing the number of elements. However, directivity can be further increased by performing signal processing on the signals received by elements of an antenna array. This thesis focuses primarily on reproducing and expanding upon a method to increase the directivity of a two-element array using non-linear transmission lines periodically loaded with varactor diodes, which act as harmonic multipliers. Simulation and circuit design is performed using Keysight Advanced Design System, a microwave circuit simulation software package. Furthermore, a hardware implementation is discussed and recommendations are made for construction of the hardware array. Finally, possible expansion of the two-element array to a four or more element array is discussed, and preliminary simulations are examined.
ContributorsHanson, Elliot (Author) / Diaz, Rudolfo (Thesis director) / Aberle, James (Committee member) / Barrett, The Honors College (Contributor) / School of Electrical, Computer, and Energy Engineering (Contributor)
Created2015-05
Description
In response to a national call within STEM to increase diversity within the sciences, there has been a growth in science education research aimed at increasing participation of underrepresented groups in science, such as women and ethnic/racial minorities. However, an underexplored underrepresented group in science are religious students. Though 82% of the United States population is religiously affiliated, only 52% of scientists are religious (Pew, 2009). Even further, only 32% of biologists are religious, with 25% identifying as Christian (Pew, 2009; Ecklund, 2007). One reason as to why Christian individuals are underrepresented in biology is because faculty may express biases that affect students' ability to persist in the field of biology. In this study, we explored how revealing a Christian student's religious identity on science graduate application would impact faculty's perception of the student during the biology graduate application process. We found that faculty were significantly more likely to perceive the student who revealed their religious identity to be less competent, hirable, likeable, and faculty would be less likely to mentor the student. Our study informs upon possible reasons as to why there is an underrepresentation of Christians in science. This further suggests that bias against Christians must be addressed in order to avoid real-world, negative treatment of Christians in science.
ContributorsTruong, Jasmine Maylee (Author) / Brownell, Sara (Thesis director) / Gaughan, Monica (Committee member) / Barnes, Liz (Committee member) / School of Life Sciences (Contributor) / W.P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013 and the extended section on the economics for the Honors Thesis. Three stages of experiments were completed. Stage 1 showed our project was functional as we were able to verify our panel produced electricity and increased the temperature of water flowing in the system by 0.65°C. Stage 2 testing included “gluing” the flow system to the back of the panel resulting in an average increase of 4.76°C in the temperature of the water in the system. Stage 3 testing included adding insulating foam to the module which resulted in increasing the average temperature of the water in our flow system by 6.95°C. The economic calculations show the expected energy cost savings for Arizona residents.
ContributorsHaines, Brent Robert (Author) / Roedel, Ronald (Thesis director) / Aberle, James (Committee member) / Rauch, Dawson (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2013-05
Description
A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013. Three stages of experiments were completed. Stage 1 showed our project was functional as we were able to verify our panel produced electricity and increased the temperature of water flowing in the system by 0.65°C. Stage 2 testing included “gluing” the flow system to the back of the panel resulting in an average increase of 4.76°C in the temperature of the water in the system. Stage 3 testing included adding insulating foam to the module which resulted in increasing the average temperature of the water in our flow system by 6.95°C.
ContributorsDenke, Steven Michael (Author) / Roedel, Ron (Thesis director) / Aberle, James (Committee member) / Rauch, Dawson (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2013-05
Description
In modern remote sensing, arrays of sensors, such as antennas in radio frequency (RF) systems and microphones in acoustic systems, provide a basis for estimating the direction of arrival of a narrow-band signal at the sensor array. A Uniform linear array (ULA) is the most well-studied array geometry in that its performance characteristics and limitations are well known, especially for signals originating in the far field. In some instances, the geometry of an array may be perturbed by an environmental disturbance that actually changes its nominal geometry; such as, towing an array behind a moving vehicle. Additionally, sparse arrays have become of interest again due to recent work in co-prime arrays. These sparse arrays contain fewer elements than a ULA but maintain the array length. The effects of these alterations to a ULA are of interest. Given this motivation, theoretical and experimental (i.e. via computer simulation) processes are used to determine quantitative and qualitative effects of perturbation and sparsification on standard metrics of array performance. These metrics include: main lobe gain, main lobe width and main lobe to side lobe ratio. Furthermore, in order to ascertain results/conclusions, these effects are juxtaposed with the performance of a ULA. Through the perturbation of each element following the first element drawn from a uniform distribution centered around the nominal position, it was found that both the theoretical mean and sample mean are relatively similar to the beam pattern of the full array. Meanwhile, by using a sparsification method of maintaining all the lags, it was found that this particular method was unnecessary. Simply taking out any three elements while maintaining the length of the array will produce similar results. Some configurations of elements give a better performance based on the metrics of interest in comparison to the ULA. These results demonstrate that a sparsified, perturbed or sparsified and perturbed array can be used in place of a Uniform Linear Array depending on the application.
ContributorsSilbernagel, Drake Oliver (Author) / Cochran, Douglas (Thesis director) / Aberle, James (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In 2015, the World Health Organization cited antibiotic resistance as one of the greatest current challenges to global public health. A major driver of the evolution of antibiotic resistance is the overuse and misuse of these drugs. While antibiotic stewardship, education campaigns, and health policy attempt to limit drug use globally, public understanding of antibiotic resistance and its consequences are lacking. The goal of this study is to analyze the social and cultural influences of antibiotic knowledge and usage behavior. Over a three-month period, I interviewed 211 laypersons in Guatemala, Spain, the Netherlands, India, South Africa, and New Zealand to understand their ideas, perceptions, and behaviors regarding antibiotics and compared results across countries. While an overall consensus across countries does exist, I found significant differences between low and high income countries as well as between low and high antibiotic consumption countries. Additionally, I found that having increased public health knowledge is related to lower antibiotic "risky" behavior. These results help contextualize national data on antibiotic consumption and resistance by illustrating relationships between access, beliefs, and consumption patterns within populations. The results also inform the development of community and culture specific educational campaigns regarding antibiotic resistance.
ContributorsHarris, Carlyn Larson (Author) / Maupin, Jonathan (Thesis director) / Gaughan, Monica (Committee member) / School of Human Evolution and Social Change (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Remotely controlled flying vehicles such as UAVs are becoming more common due to decreases in material costs and increases in performance of components. Radio control link options, however, have not improved at the same rate as airframes, motors, flight controllers, etc [HobbyKing]. Most UAVs require a radio link, often at 2.4 GHz, for flight control, and a second link at 915 MHz for telemetry data transmission [HobbyKing]. Occasionally there is also a video link at either 2.4 GHz or 5.8 GHz. Having multiple transmitters increase power usage from the limited battery reserve that the UAV carries. It also increases weight and space used on the airframe. In addition, the 2.4 GHz band is often congested [ISM Congestion] and does not provide as great a range for a given transmission power as lower frequencies do [Wu]. Attempting to reduce space and weight, power consumption, and simplify design, while increasing control and telemetry range requires the design, testing, and implementation of a radio link that handles both real-time flight control and telemetry with the same transceiver. Only the flight control and telemetry will be addressed in this project. Merging and/or improving the video link will not be tackled at this time in order to simplify project goals to fit inside time constraints. The new radio link system will be verified for functionality then power and range test data will be gathered to determine how effective it is.
ContributorsPortillo-Wightman, Gabrielle Raquel (Author) / Goryll, Michael (Thesis director) / Aberle, James (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
More than 40% of all U.S. opioid overdose deaths in 2016 involved a prescription opioid, with more than 46 people dying every day from overdoses involving prescription opioids, (CDC, 2017). Over the years, lawmakers have implemented policies and laws to address the opioid epidemic, and many of these vary from state to state. This study will lay out the basic guidelines of common pieces of legislation. It also examines relationships between 6 state-specific prescribing or preventative laws and associated changes in opioid-related deaths using a longitudinal cross-state study design (2007-2015). Specifically, it uses a linear regression to examine changes in state-specific rates of opioid-related deaths after implementation of specific policies, and whether states implementing these policies saw smaller increases than states without these policies. Initial key findings of this study show that three policies have a statistically significant association with opioid related overdose deaths are—Good Samaritan Laws, Standing Order Laws, and Naloxone Liability Laws. Paradoxically, all three policies correlated with an increase in opioid overdose deaths between 2007 and 2016. However, after correcting for the potential spurious relationship between state-specific timing of policy implementation and death rates, two policies have a statistically significant association (alpha <0.05) with opioid overdose death rates. First, the Naloxone Liability Laws were significantly associated with changes in opioid-related deaths and was correlated with a 0.33 log increase in opioid overdose death rates, or a 29% increase. This equates to about 1.39 more deaths per year per 100,000 people. Second, the legislation that allows for 3rd Party Naloxone prescriptions correlated with a 0.33 log decrease in opioid overdose death rates, or a 29% decrease. This equates to 1.39 fewer deaths per year per 100,000 people.
ContributorsDavis, Joshua Alan (Author) / Hruschka, Daniel (Thesis director) / Gaughan, Monica (Committee member) / School of Human Evolution & Social Change (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05