Barrett, The Honors College at Arizona State University proudly showcases the work of undergraduate honors students by sharing this collection exclusively with the ASU community.

Barrett accepts high performing, academically engaged undergraduate students and works with them in collaboration with all of the other academic units at Arizona State University. All Barrett students complete a thesis or creative project which is an opportunity to explore an intellectual interest and produce an original piece of scholarly research. The thesis or creative project is supervised and defended in front of a faculty committee. Students are able to engage with professors who are nationally recognized in their fields and committed to working with honors students. Completing a Barrett thesis or creative project is an opportunity for undergraduate honors students to contribute to the ASU academic community in a meaningful way.

Displaying 1 - 10 of 30
136707-Thumbnail Image.png
Description
Pacemakers in the early 1970s were powered by betavoltaic devices which provided long lasting battery life. The betavoltaic devices also emitted gamma radiation due to inadvertent radioisotope contamination, which could not be completely shielded. The betavoltaic devices were quickly replaced by lithium batteries after their invention, and betavoltaics were abandoned.

Pacemakers in the early 1970s were powered by betavoltaic devices which provided long lasting battery life. The betavoltaic devices also emitted gamma radiation due to inadvertent radioisotope contamination, which could not be completely shielded. The betavoltaic devices were quickly replaced by lithium batteries after their invention, and betavoltaics were abandoned. Modern technological advancements made it possible to isolate beta emitting radioisotopes properly and achieve better energy conversion efficiencies which revived the topic of betavoltaics. This research project has studied state-of-the-art pacemakers and modern radioactive power sources in order to determine if modern pacemakers can be safely nuclear powered and if that is a reasonable combination.
ContributorsAwad, Al-Homam Abdualrahman (Author) / Holbert, Keith (Thesis director) / Aberle, James (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2014-12
Description
Previous research has found improvements in motor control following Assisted Cycle Therapy (ACT) in persons with Parkinson's disease, Down syndrome (DS) and autism. Our study examined the effect of ACT on manual dexterity in adults with Attention Deficit Hyperactivity Disorder (ADHD). Nine adults with ADHD completed six weeks of light

Previous research has found improvements in motor control following Assisted Cycle Therapy (ACT) in persons with Parkinson's disease, Down syndrome (DS) and autism. Our study examined the effect of ACT on manual dexterity in adults with Attention Deficit Hyperactivity Disorder (ADHD). Nine adults with ADHD completed six weeks of light intensity cycling on a stationary bicycle, three times per week for 30 minutes. Four adults with ADHD were in the voluntary cycling (VC) group in which they pedaled at their self-selected rate. Five adults with ADHD were in the ACT group in which a motor moved their legs at a rate approximately 13% faster than their voluntary rate. Our results showed that the dominant hand moved more pegs following ACT than VC. Our results were interpreted with respect to upregulation of neurotrophic factors in the motor cortex following ACT.
ContributorsRupp, Emily Anne (Author) / Ringenbach, Shannon (Thesis director) / Caterino, Linda (Committee member) / Broman, Tannah (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2016-05
136194-Thumbnail Image.png
Description
Generally, increasing the electrical size of an antenna will increase the directivity of the antenna. In the case of an array of identical antennas with uniform spacing, the electrical size can be increased by increasing the number of elements. However, directivity can be further increased by performing signal processing on

Generally, increasing the electrical size of an antenna will increase the directivity of the antenna. In the case of an array of identical antennas with uniform spacing, the electrical size can be increased by increasing the number of elements. However, directivity can be further increased by performing signal processing on the signals received by elements of an antenna array. This thesis focuses primarily on reproducing and expanding upon a method to increase the directivity of a two-element array using non-linear transmission lines periodically loaded with varactor diodes, which act as harmonic multipliers. Simulation and circuit design is performed using Keysight Advanced Design System, a microwave circuit simulation software package. Furthermore, a hardware implementation is discussed and recommendations are made for construction of the hardware array. Finally, possible expansion of the two-element array to a four or more element array is discussed, and preliminary simulations are examined.
ContributorsHanson, Elliot (Author) / Diaz, Rudolfo (Thesis director) / Aberle, James (Committee member) / Barrett, The Honors College (Contributor) / School of Electrical, Computer, and Energy Engineering (Contributor)
Created2015-05
137496-Thumbnail Image.png
Description
A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013 and the extended section on the economics for the Honors Thesis.

A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013 and the extended section on the economics for the Honors Thesis. Three stages of experiments were completed. Stage 1 showed our project was functional as we were able to verify our panel produced electricity and increased the temperature of water flowing in the system by 0.65°C. Stage 2 testing included “gluing” the flow system to the back of the panel resulting in an average increase of 4.76°C in the temperature of the water in the system. Stage 3 testing included adding insulating foam to the module which resulted in increasing the average temperature of the water in our flow system by 6.95°C. The economic calculations show the expected energy cost savings for Arizona residents.
ContributorsHaines, Brent Robert (Author) / Roedel, Ronald (Thesis director) / Aberle, James (Committee member) / Rauch, Dawson (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2013-05
137412-Thumbnail Image.png
Description
Training the bench press exercise on a traditional flat bench does not induce a level of instability as seen in sport movements and activities of daily living. Because of this, many new types of equipment have been created in an attempt to induce instability, such as the COR Bench. 15

Training the bench press exercise on a traditional flat bench does not induce a level of instability as seen in sport movements and activities of daily living. Because of this, many new types of equipment have been created in an attempt to induce instability, such as the COR Bench. 15 males and 7 females between the ages of 18 and 30 were recruited for the present study, which tested two forms of instability: using one dumbbell rather than two, and lifting on the COR bench compared to a flat bench. Thusly, EMG was used to measure muscle activity in four separate conditions of unilateral bench press movements: on a flat bench with one dumbbell, on a flat bench with two dumbbells, on the COR Bench with one dumbbell, and on the COR Bench with two dumbbells. Results indicated that lifting with one dumbbell compared to two dumbbells on the flat bench significantly increased muscle activity across all four muscles being analyzed (pectoralis major, p = .005; middle trapezius, p = .008; external obliques, p = .004; and internal obliques, p = .003), but lifting with one dumbbell compared to two dumbbells on the COR Bench only significantly increased muscle activity in the middle trapezius (p = .001), external obliques(p = . 032), and internal obliques (p = .001). The only muscle to exhibit a significant increase in muscle activity when going from one dumbbell on the flat bench to one dumbbell on the COR Bench was the middle trapezius (p = .010). These results imply that the COR Bench itself does not increase muscle activity as much as switching from two dumbbells to one dumbbell, regardless of the bench being used.
ContributorsPatterson, Jeffrey (Author) / Harper, Erin (Thesis director) / Broman, Tannah (Committee member) / Cataldo, Donna (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2013-12
137365-Thumbnail Image.png
Description
The following study evaluated the effectiveness of the COR Bench, to determine if its unstable surface allows for both greater range of motion and greater tendency towards co-contraction, in comparison to a traditional flat bench. An initial session assessed the 19 participants’ (age, 22.364 ± 2.480 years; mass, 77.850 ±

The following study evaluated the effectiveness of the COR Bench, to determine if its unstable surface allows for both greater range of motion and greater tendency towards co-contraction, in comparison to a traditional flat bench. An initial session assessed the 19 participants’ (age, 22.364 ± 2.480 years; mass, 77.850 ± 18.328 kg; height, 1.787 ± 0.0923 m) current one- repetition maximum strength levels for the unilateral chest press. Four different conditions were used to test the kinematic variables such that each participant completed 5 repetitions of unilateral chest presses at 70% of their max with one and two dumbbells on both the COR Bench and traditional flat bench. Differences in ROM were evaluated by measuring an angular representation of the shoulder complex. Levels of co-contraction were determined by analyzing the middle trapezius EMG. The results indicate a significant difference in ROM between the conditions (p = .00); specifically, a greater ROM during the one dumbbell condition versus the two dumbbell condition on the COR and the flat benches (p = .002, 0.001 respectively); greater ROM with two dumbbells on the COR bench compared to the flat bench (p = .022). The middle trapezius EMG data showed a significant difference in co-contraction levels between conditions (p = .00); specifically, a greater co-contraction during the one dumbbell condition versus the two dumbbell condition on the COR and the flat benches (p = .001, 0.008 respectively); greater co- contraction with one dumbbell on the COR bench compared to the flat bench (p = .010). This lends support for the future use of the COR bench as a means for more efficient exercise through a full range of motion; however, it also suggests that more practice is necessary to master the movement on the bench to decrease co-contraction activity.
ContributorsOppenheimer, Nicole (Author) / Harper, Erin (Thesis director) / Broman, Tannah (Committee member) / Hoffner, Kristin (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2013-12
137463-Thumbnail Image.png
Description
A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013. Three stages of experiments were completed. Stage 1 showed our project

A hybrid PV/T module was built, consisting of a thermal liquid heating system and a photovoltaic module system that combine in a hybrid format. This report will discuss the work on the project from Fall 2012 to Spring 2013. Three stages of experiments were completed. Stage 1 showed our project was functional as we were able to verify our panel produced electricity and increased the temperature of water flowing in the system by 0.65°C. Stage 2 testing included “gluing” the flow system to the back of the panel resulting in an average increase of 4.76°C in the temperature of the water in the system. Stage 3 testing included adding insulating foam to the module which resulted in increasing the average temperature of the water in our flow system by 6.95°C.
ContributorsDenke, Steven Michael (Author) / Roedel, Ron (Thesis director) / Aberle, James (Committee member) / Rauch, Dawson (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2013-05
135260-Thumbnail Image.png
Description
In modern remote sensing, arrays of sensors, such as antennas in radio frequency (RF) systems and microphones in acoustic systems, provide a basis for estimating the direction of arrival of a narrow-band signal at the sensor array. A Uniform linear array (ULA) is the most well-studied array geometry in that

In modern remote sensing, arrays of sensors, such as antennas in radio frequency (RF) systems and microphones in acoustic systems, provide a basis for estimating the direction of arrival of a narrow-band signal at the sensor array. A Uniform linear array (ULA) is the most well-studied array geometry in that its performance characteristics and limitations are well known, especially for signals originating in the far field. In some instances, the geometry of an array may be perturbed by an environmental disturbance that actually changes its nominal geometry; such as, towing an array behind a moving vehicle. Additionally, sparse arrays have become of interest again due to recent work in co-prime arrays. These sparse arrays contain fewer elements than a ULA but maintain the array length. The effects of these alterations to a ULA are of interest. Given this motivation, theoretical and experimental (i.e. via computer simulation) processes are used to determine quantitative and qualitative effects of perturbation and sparsification on standard metrics of array performance. These metrics include: main lobe gain, main lobe width and main lobe to side lobe ratio. Furthermore, in order to ascertain results/conclusions, these effects are juxtaposed with the performance of a ULA. Through the perturbation of each element following the first element drawn from a uniform distribution centered around the nominal position, it was found that both the theoretical mean and sample mean are relatively similar to the beam pattern of the full array. Meanwhile, by using a sparsification method of maintaining all the lags, it was found that this particular method was unnecessary. Simply taking out any three elements while maintaining the length of the array will produce similar results. Some configurations of elements give a better performance based on the metrics of interest in comparison to the ULA. These results demonstrate that a sparsified, perturbed or sparsified and perturbed array can be used in place of a Uniform Linear Array depending on the application.
ContributorsSilbernagel, Drake Oliver (Author) / Cochran, Douglas (Thesis director) / Aberle, James (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
133331-Thumbnail Image.png
Description
This observational study explored the motivational factors for recreational cyclists participating in a charity cycling event held by a Christian based nonprofit, the Fuller Center. Participants (n=22; men: n=10; women: n=12) cycled at least one 302 mile segment of a bike ride distancing the whole West Coast (1,657 miles). The

This observational study explored the motivational factors for recreational cyclists participating in a charity cycling event held by a Christian based nonprofit, the Fuller Center. Participants (n=22; men: n=10; women: n=12) cycled at least one 302 mile segment of a bike ride distancing the whole West Coast (1,657 miles). The purpose of the study was to determine the motives for the cyclists' participation and to then classify those motives as intrinsic or extrinsic. A scale used to measure motivation of marathoners was transcribed to match those of the cycling participants to assess motivation. The participants were divided into 4 groups based on self-reported experience levels, and it was shown that across all types of experience levels, both intrinsic and extrinsic motivators were expressed but with greater emphasis on intrinsic factors. The most commonly indicated intrinsic motivation subcategories were life meaning, personal goal achievement, and affiliation, with affiliation being recognized by every individual. The most commonly indicated extrinsic subcategories were competition, recognition, health orientation, and weight concern. Though each rider's story was signature to the individual, the very specific religious background and philanthropic mission of the Fuller Center Bike Adventure weighed heavily into each individual's motivation alongside the classified intrinsic and extrinsic factors. Therefore, this research offered valuable data about motivation of recreational cyclists but future studies should focus on a less specific population.
ContributorsReyes, Naomi Gabrielle (Author) / Hoffner, Kristin (Thesis director) / Broman, Tannah (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133154-Thumbnail Image.png
Description
The purpose of this study was to determine if there was a relationship between the constructs of motivational theories, Self-Determination Theory and Health Belief Model, and adherence to a home exercise program. The constructs of Self-Determination Theory are autonomy, competence, and social relatedness. The constructs of Health Belief Model are

The purpose of this study was to determine if there was a relationship between the constructs of motivational theories, Self-Determination Theory and Health Belief Model, and adherence to a home exercise program. The constructs of Self-Determination Theory are autonomy, competence, and social relatedness. The constructs of Health Belief Model are perceived benefits, perceived barriers, perceived severity, and perceived susceptibility. Participants were receiving therapy at two outpatient clinics located in the Phoenix metropolitan area (n=40). Autonomy was assessed with a modified Treatment Self-Regulation Questionnaire. Competence was assessed with a modified Perceived Competence Scale. Social relatedness was assessed with a modified Health Care Climate Questionnaire. Perceived benefits and barriers were measured with a modified Exercise Benefits/Barriers Scale. Perceived severity and susceptibility were measured with a modified Health Beliefs Questionnaire. Adherence was measured with one Likert-type question that was created by the researchers. The data was scored and analyzed with the scoring guidelines provided by the questionnaires and the statistics software, IBM Statistical Package for the Social Sciences. The results showed that competence was the only construct that was significantly correlated with home exercise program adherence. The results from this study should be used for further research that focuses on creating a competence-supportive environment in physical therapy settings.
ContributorsAutrey, Makenna Noelle (Co-author) / Hamilton, Marissa (Co-author) / Hoffner, Kristin (Thesis director) / Broman, Tannah (Committee member) / School of Nutrition and Health Promotion (Contributor) / Department of Psychology (Contributor) / Barrett, The Honors College (Contributor)
Created2018-12