Matching Items (32)
Description
This Creative Project was carried out in coordination with the capstone project, Around the Corner Imaging with Terahertz Waves. This capstone project deals with a system designed to implement Around the Corner, or Non Line-of-Sight (NLoS) Imaging. This document discusses the creation of a GUI using MATLAB to control the Terahertz Imaging system. The GUI was developed in response to a need for synchronization, ease of operation, easy parameter modification, and data management. Along the way, many design decisions were made ranging from choosing a software platform to determining how variables should be passed. These decisions and considerations are discussed in this document. The resulting GUI has measured up to the design criteria and will be able to be used by anyone wishing to use the Terahertz Imaging System for further research in the field of Around the Corner or NLoS Imaging.
ContributorsWood, Jacob Cannon (Author) / Trichopoulos, Georgios (Thesis director) / Aberle, James (Committee member) / Electrical Engineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The purpose of this project is to analyze the MIT OpenCourseWare coffee can radar design and modify it to be better suited for drone based synthetic aperture radar (SAR) applications while maintaining the low-cost aspect of the original design. The MIT coffee can radar can function as a ranged radar, a Doppler radar, or as SAR. Through simulations and research, the suggestions for how to modify the radar resulted in swapping the coffee can monopole antennas for patch antenna arrays or helical ordinary end-fire antennas, adding an Arduino for automatic recording of output pulses, and switching from a breadboard construction to a PCB to shrink form factor and keep costs and construction time low.
ContributorsRivera, Danielle (Author) / Trichopoulos, Georgios (Thesis director) / Aberle, James (Committee member) / Department of Information Systems (Contributor) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-12
Description
Satellite communications employs circular polarization (CP) to circumvent thewell-known phenomenon known as Faraday Rotation, where the ionosphere rotates the
horizontal and vertical polarization components resulting in signal degradation especially
at lower frequencies, i.e., VHF and L-band, and in tropical regions of the earth. Satellite circularly polarized antenna feed technology commonly employs bulkyand lossy 90-degree hybrid combiners to convert linear polarization to circular
polarization, which results in a higher noise figure for receive applications and a less
repeatable and more difficult design to tune and manufacture. This thesis aims at designing, modeling and simulating a prototype S/X dual bandCP feed/polarizer utilizing a technique known as the “Spread-Squeeze” polarizer, which
offers the advantages of compact size, ease of manufacture, and lower loss and noise
figure, relative to the current technology that often employs an external 3-dB hybrid
combiner. Ansys High Frequency Structure Simulator (HFSS), a commercial
electromagnetic modeling and simulation tool, is used for the simulations. Further, this thesis aims to characterize the performance of the dual feed hornwith respect to aperture efficiency, that is, the degree to which the feed horn illuminates
the parabolic reflector.
ContributorsCowan, Brad (Author) / Aberle, James (Thesis advisor) / Pan, George (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2021
Description
The recent trends in wireless communication, fueled by the demand for lower latency and higher bandwidth, have caused the migration of users from lower frequencies to higher frequencies, i.e., from 2.5GHz to millimeter wave. However, the migration to higher frequencies has its challenges. The sensitivity to blockages is a key challenge for millimeter wave and terahertz networks in 5G and beyond. Since these networks mainly rely on line-of-sight (LOS) links, sudden link blockages highly threaten the reliability of such networks. Further, when the LOS link is blocked, the network typically needs to hand off the user to another LOS basestation, which may incur critical time latency, especially if a search over a large codebook of narrow beams is needed. A promising way to tackle the reliability and latency challenges lies in enabling proaction in wireless networks. Proaction allows the network to anticipate future blockages, especially dynamic blockages, and initiate user hand-off beforehand. This thesis presents a complete machine learning framework for enabling proaction in wireless networks relying on the multi-modal 3D LiDAR(Light Detection and Ranging) point cloud and position data. In particular, the paper proposes a sensing-aided wireless communication solution that utilizes bimodal machine learning to predict the user link status. This is mainly achieved via a deep learning algorithm that learns from LiDAR point-cloud and position data to distinguish between LOS and NLOS(non line-of-sight) links. The algorithm is evaluated on the multi-modal wireless Communication Dataset DeepSense6G dataset. It is a time-synchronized collection of data from various sensors such as millimeter wave power, position, camera, radar, and LiDAR. Experimental results indicate that the algorithm can accurately predict link status with 87% accuracy. This highlights a promising direction for enabling high reliability and low latency in future wireless networks.
ContributorsSrinivas, Tirumalai Vinjamoor Nikhil (Author) / Alkhateeb, Ahmed (Thesis advisor) / Trichopoulos, Georgios (Committee member) / Myhajlenko, Stefan (Committee member) / Arizona State University (Publisher)
Created2022
Description
Kinetic Inductance Detectors (KIDs) offer highly sensitive solutions for millimeter and submillimeter wave astronomy. KIDs are superconducting detectors capable of measuring photon energy and arrival time. KIDs use the change in surface impedance of the superconductor when an incident photon is absorbed and breaks Cooper pairs in the superconducting material. This occurs when KIDs use a superconducting resonator: when a photon is incident on the inductor, the photon is absorbed and inductance increases and the resonant frequency decreases. The resonator is weakly coupled to a transmission line which naturally allows for multiplexing to allow up to thousands of detectors to be read out on one transmission line. In this thesis a KID is presented to be used at submillimeter wavelengths. I optimized a polarization-sensitive aluminum absorber for future Balloon-borne Large Aperture Submillimeter Telescope (BLAST) missions. BLAST is designed to investigate polarized interstellar dust and the role of magnetic fields on star formation. As part of the effort to develop aluminum KIDs for BLAST, I investigated the optical coupling method including different feedhorn structures and a hybrid design. I present a suite of simulations calculating the absorption efficiency of the absorber. The optimized KID is a feedhorn/waveguide coupled front-illuminated detector that achieves 70% absorption over the frequency band centered at 250um.
ContributorsChamberlin, Kathryn (Author) / Mauskopf, Philip (Thesis advisor) / Trichopoulos, Georgios (Committee member) / Zeinolabedinzadeh, Saeed (Committee member) / Arizona State University (Publisher)
Created2022
Description
Impedance is one of the fundamental properties of electrical components, materials, and waves. Therefore, impedance measurement and monitoring have a wide range of applications. The multi-port technique is a natural candidate for impedance measurement and monitoring due to its low overhead and ease of implementation for Built-in Self-Test (BIST) applications. The multi-port technique can measure complex reflection coefficients, thus impedance, by using scalar measurements provided by the power detectors. These power detectors are strategically placed on different points (ports) of a passive network to produce unique solution. Impedance measurement and monitoring is readily deployed on mobile phone radio-frequency (RF) front ends, and are combined with antenna tuners to boost the signal reception capabilities of phones. These sensors also can be used in self-healing circuits to improve their yield and performance under process, voltage, and temperature variations. Even though, this work is preliminary interested in low-overhead impedance measurement for RF circuit applications, the proposed methods can be used in a wide variety of metrology applications where impedance measurements are already used. Some examples of these applications include determining material properties, plasma generation, and moisture detection. Additionally, multi-port applications extend beyond the impedance measurement. There are applications where multi-ports are used as receivers for communication systems, RADARs, and remote sensing applications. The multi-port technique generally requires a careful design of the testing structure to produce a unique solution from power detector measurements. It also requires the use of nonlinear solvers during calibration, and depending on calibration procedure, measurement. The use of nonlinear solvers generates issues for convergence, computational complexity, and resources needed for carrying out calibrations and measurements in a timely manner. In this work, using periodic structures, a structure where a circuit block repeats itself, for multi-port measurements is proposed. The periodic structures introduce a new constraint that simplifies the multi-port theory and leads to an explicit calibration and measurement procedure. Unlike the existing calibration procedures which require at least five loads and various constraints on the load for explicit solution, the proposed method can use three loads for calibration. Multi-ports built with periodic structures will always produce a unique measurement result. This leads to increased bandwidth of operation and simplifies design procedure. The efficacy of the method demonstrated in two embodiments.
In the first embodiment, a multi-port is directly embedded into a matching network to measure impedance of the load.
In the second embodiment, periodic structures are used to compare two loads without requiring any calibration.
ContributorsAvci, Muslum Emir (Author) / Ozev, Sule (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Kitchen, Jennifer (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2023
Description
Magnetic Resonance Imaging has become an increasingly reliable source of medical imaging to obtain high quality detailed images of the human anatomy. Application specific coil or an array of coils when placed closely to the anatomy produces high quality image due to the improved spatial signal to noise ratio. Elastic RF coils have been shown to conform to the shape of the patient’s body and drastically reduce the gap between coil and anatomy. First, a major challenge faced by these elastic RF coils is the changing impedance condition as the coil takes a different shape for every individual. Next, an area that could benefit from the improved image quality and patient comfort that comes from flexible RF coil design is endorectal prostate imaging. Demonstrated in the first part of this dissertation is a modular solution to compensate the impedance mismatch. Standalone Wireless Impedance Matching (SWIM) system is an automatic impedance mismatch compensation system that can function independently of the MR scanner. The matching network consists of a capacitor array with RF switches to electronically cycle through different input impedance conditions. The SWIM system can automatically calibrate an RF coil in 3s with a reflection coefficient of less than -15dB resulting in improved Signal-to-noise ratio (SNR) of the sample image by 12% - 24%, based on sample size, when compared to a loaded coil without retuning.
For the second part, we propose a novel elastic and inflatable RF coil integrated with the SWIM system for endorectal prostate imaging at 9.4T. A silicone polymer substrate filled with liquid metal alloy is designed and fabricated with a cavity to create ii inflation. This inflatable RF coil is combined with the SWIM system to automatically tune and match after inflating the RF coil for individual levels of inflation. The imaging results have shown a ~10%, ~19%, and ~25 % increase in SNR due to inflation of RF coil at different ROIs in the acquired image. Overall, the methods proposed and discussed in this thesis are a step towards a new generation of RF coil systems for both existing applications and upcoming ones.
ContributorsKandala, Sri Kirthi (Author) / Sohn, Sung-Min (Thesis advisor) / Kdibagkar, Vikram (Committee member) / Sadleir, Rosalind J (Committee member) / Beeman, Scott (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2023
Description
In 1946 Felix Bloch first demonstrated the phenomenon of nuclear magnetic resonance using continuous-wave signal generation and acquisition. Shortly after in 1966, Richard R. Ernst demonstrated the breakthrough that nuclear magnetic resonance needed to develop into magnetic resonance imaging: the application of Fourier transforms for sensitive pulsed imaging. Upon this discovery, the world of research began to develop high power radio amplifiers and fast radio switches for pulsed experimentation. Consequently, continuous-wave imaging placed on the backburner.Although high power pulses are dominant in clinical imaging, there are unique advantages to low power, continuous-wave pulse sequences that transmit and receive signals simultaneously. Primarily, tissues or materials with short T2 time constants can be imaged and the peak radio power required is drastically reduced.
The fundamental problem with this lies in its nature; the transmitter leaks a strong leakage signal into the receiver, thus saturating the receiver and the intended nuclear magnetic resonance signal is lost noise.
Demonstrated in this dissertation is a multichannel standalone simultaneous transmit and receive (STAR) system with remote user-control that enables continuous- wave full-duplex imaging. STAR calibrates cancellation signals through vector modulators that match the leakage signal of each receiver in amplitude but opposite in phase, therefore destructively interfering the leakage signals. STAR does not require specific imaging coils or console inputs for calibration. It was designed to be general- purpose, therefore integrating into any imaging system. To begin, the user uses an Android tablet to tune STAR to match the Larmor frequency in the bore. Then, the user tells STAR to begin calibration. After self-calibrating, the user may fine-tune the calibration state of the system before enabling a low-power mode for system electronics and imaging may commence. STAR was demonstrated to isolate two receiver coils upwards of 70 dB from the transmit coil and is readily upgradable to enable the use of four receive coils.
Some primary concerns of STAR are the removal of transceivers for multichannel operation, digital circuit noise, external noise, calibration speed, upgradability, and the isolation introduced; all of which are addressed in the proceeding thesis.
ContributorsColwell, Zachary Allen (Author) / Sohn, Sung-Min (Thesis advisor) / Trichopoulos, Georgios (Thesis advisor) / Aberle, James (Committee member) / Sadleir, Rosalind (Committee member) / Arizona State University (Publisher)
Created2023
Description
The work covered in this dissertation addresses two areas revolving around superconducting nanowire detector development. The first is regarding array architectureused for a large-scale system. The second involves operating under conditions that
allow for a linear response in a superconducting nanowire detector. This dissertation
provides the relevant theory, design, and measurements to characterize these detectors. The array architecture studied here utilizes a superconducting nanowire single
photon detector embedded in an LC resonant structure, allowing multiple pixels to
couple to a single transmission line and identify each one by a tuned characteristic frequency. The pixels in the array are DC-biased, allowing them to respond to absorbed
single photons and avoiding any dead time associated with RF biasing. Measured
results from a 16-pixel array based on chip components are analyzed. The development here directs this architecture towards integrating a proven 16-pixel design onto
a single substrate with the capacity to scale to a higher pixel count and integrate
into a broad range of applications. This text outlines the theory behind the proposed
linear operation regime and details the considerations needed to achieve a response.
The basic principle relies on the time-dependent change in kinetic inductance due to
an absorbed photon. Under the conditions discussed in the text, this would allow
for fast photon number resolution. However, without reaching those conditions, the
detector may still operate under a higher incident photon flux. Two device designs
are formulated and simulated, weighing the benefits and drawbacks of each approach.
One of the device designs uses an impedance-matching taper to minimize reflections
between the nanowire and 50 Ohm amplifier. The other design utilizes N parallel
nanowires spanning the length of a gap along a 50 Ohm transmission line path. The
tapered device is realized to a proof-of-principle stage and measured under conditions
that set a limit on the device’s linear response to optical power. The performance of this detector points to areas of improvement that are addressed or circumvented
in the parallel bridge design. Potential for future development is discussed for the
frequency multiplexed superconducting nanowire single photon detector array and
the linear mode detector.
ContributorsGlasby, Jacob (Author) / Mauskopf, Philip (Thesis advisor) / Chamberlin, Ralph (Committee member) / Schmidt, Kevin (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2023
Description
Terahertz (THz) waves (300 GHz to 10 THz) constitute the least studied part of the electromagnetic (EM) spectrum with unique propagation properties that make them attractive to emerging sensing and imaging application. As opposed to optical signals, THz waves can penetrate several non-metallic materials (e.g., plastic, wood, and thin tissues), thus enabling several applications in security monitoring, non-destructive evaluation, and biometrics. Additionally, THz waves scatter on most surfaces distinctively compared with lower/higher frequencies (e.g., microwave/optical bands). Therefore, based on these two interesting THz wave propagation properties, namely penetration and scattering, I worked on THz imaging methods that explore non-line-of-sight (NLoS) information. First, I use a THz microscopy method to probe the fingertips as a new technique for fingerprint scanning. Due to the wave penetration in the THz range, I can exploit sub-skin traits not visible with current approaches to obtain a more robust and secure fingerprint scanning method. I also fabricated fingerprint spoofs using latex to compare the imaging results between real and fake fingers. Next, I focus on THz imaging hardware topologies and algorithms for longer-distance imaging applications. As such, I compare the imaging performance of dense and sparse antenna arrays through simulations and measurements. I show that sparse arrays with nonuniform amplitudes can provide lower side lobes in the images. Besides, although sparse arrays feature a much smaller total number of elements, dense arrays have advantages when imaging scenarios with multiple objects. Afterward, I propose a THz imaging method to see around obstacles/corners. THz waves’ unique scattering properties are helpful to implement around-the-corner imaging. I carried out both simulations and measurements in various scenarios to validate the proposed method. The results indicate that THz waves can reveal the hidden scene with centimeter-scale resolution using proper rough surfaces and moderately sized apertures. Moreover, I demonstrate that this imaging technique can benefit simultaneous localization and mapping (SLAM) in future communication systems. NLoS images enable accurate localization of blocked users, hence increasing the link robustness. I present both simulation and measurement results to validate this SLAM method. I also show that better localization accuracy is achieved when the user's antenna is omnidirectional rather than directional.
ContributorsCui, Yiran (Author) / Trichopoulos, Georgios (Thesis advisor) / Balanis, Constantine (Committee member) / Aberle, James (Committee member) / Alkhateeb, Ahmed (Committee member) / Arizona State University (Publisher)
Created2022