Filtering by
Laminated composites are increasingly being used in various industries including <br/>automotive and aerospace. Under a variety of extreme loading conditions such as low and <br/>high-velocity impacts and crash, laminated composites delaminate. To understand how and<br/>when delamination occurs, two types of laboratory tests are conducted - End-notched <br/>Flexure (ENF) test and Double Cantilever Beam (DCB) test. The ENF test is designed to <br/>find the mode II interlaminar fracture toughness, and the DCB test, the mode I interlaminar <br/>fracture toughness. In this thesis, thermopressed Honeywell Spectra Shield® 5231 <br/>composite specimens made of ultra-high molecular weight polyethylene (UHMWPE), <br/>manufactured under two different pressures (3000 psi and 6000 psi), are tested in the <br/>laboratory to find its delamination properties. The test specimen preparation, experimental <br/>procedures, and data reduction to determine the mode I and mode II interlaminar fracture <br/>properties are discussed. The ENF test results show a 15.8% increase in strain energy <br/>release rate for the 6000 psi specimens when compared to the 3000 psi specimens. <br/>Conducting the DCB tests proved to be challenging due to the low compressive strength <br/>of the material and hence required modifications to the test specimens. An estimate of the <br/>mode I interlaminar fracture toughness was found for only two of the 6000 psi specimens.
Effects of Aggregate Packing Density on the Mechanical Properties of Ultra-High Performance Concrete
In this study, aggregate material evaluation and testing was conducted for use in the mix design of the UHPC mixes that were carried out and tested. Each mix employed the same general UHPC mixture design with the only difference being the aggregate proportions of #4, #8, and #10 nominal size aggregates. The purpose of using a UHPC mix design that was independent of aggregate proportioning was to evaluate the effects of varying aggregate particle packing densities. Increased particle packing density of UHPC provide improved mechanical performance by decreasing the distance between particle within cured UHPC, thereby producing significant increases in compressive strength, tensile strength, durability, and service life of UHPC when compared to standard concrete. For this study, particle packing densities of 0.509, 0.521, 0.540, and 0.552 were employed and evaluated on the basis of compressive strength and tensile strength to determine the optimum UHPC mix design.