Matching Items (9)
Description
This paper explores the consequences of cleaning rescue ropes with common disinfectants and cleansers in order to assess their usability in cleaning ropes contaminated with blood borne pathogens. Using a modified version of an industry-standard testing procedure and in-depth statistical analysis, it characterizes the effect each chemical has on the mechanical properties of the rope. The experiment measured the strength and elastic properties of rope core fibers soaked in different chemicals and at different concentration levels. The data show that certain common solutions for cleaning equipment are, in fact, damaging to the equipment and thus dangerous to the users. Even products marketed for climbing ropes were found to be potentially hazardous. The results also demonstrate a curious phenomenon occurring within the washing process that causes a shift in the elastic properties of the fibers, prompting additional research. Further work is needed to expand the breadth and depth of these results and to make effective recommendations to the rope industry and rescue professionals regarding rope care and maintenance.
ContributorsDenike, Andrew Nicholas (Author) / Middleton, James (Thesis director) / Liao, Yabin (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In the last several years, there has been a significant growth in research in the field of power harvesting, the process of capturing the energy surrounding a system and converting it into usable electrical energy. This concept has received particular interest in recent years with the ever-increasing production of portable and wireless electronic devices. Many of these devices that are currently in production utilize electrochemical batteries as a power source, which while effective, maintain the drawback of having a finite energy supply, thus requiring periodic replacement. The concept of power harvesting, however, works to solve these issues through electronics that are designed to capture ambient energy surrounding them convert it into usable electronic energy. The use of power harvesting in energy scavenging devices allows for the possible development of devices that are self-powered and do not require their power sources to be replaced. Several models have been developed by Soldano et al [3] and Liao et al [2] that have been proven accurate at predicting the power output of a piezoelectric power harvester in a cantileaver beam configuration. The work in this paper will expand further on the model developed by Liao et al [2], and as its main goal will use a modified form of that model to predict the optimal dimensions for a beam power harvester to achieve the maximum power output possible. The model will be updated b replacing the mode shape function used to approximate the deflection of the beam with the true defletion, which is based on the complex wavenumber that incorporates the complex Young's modulus of the material used. Other changes to account for this replacement will also be presented, along with numerical results of the final model.
ContributorsWinterstein, Joshua (Author) / Liao, Yabin (Thesis director) / Jiang, Hanqing (Committee member) / Chen, Kangping (Committee member) / Barrett, The Honors College (Contributor)
Created2012-05
Description
Abstract A study was conducted on three models of the medieval siege engine, the trebuchet. The three models analyzed were the "see-saw", the hinged, and the floating arm trebuchet. Of these models, the mathematical model of each was determined. With his model, the most efficient model was determined to be the floating arm trebuchet, with a range efficiency of 0.8275 and an energy efficiency of 0.8526. The hinged trebuchet achieved efficiencies of 0.8065 for both range and energy efficiency and the "see-saw" with efficiencies of only 0.567 and 0.570, respectively. Then, the floating arm trebuchet's arm length ratio and sling length were then optimized. It was determined that the optimal arm length ratio was approximately 1:2, where the short arm is 1.7 feet and the long arm is 3.3 feet. The optimized sling length was 4.45 feet. Finally, the mathematical models were compared to full scale models. These ranges of the full scale models were surprisingly accurate with what was predicted. The hinged trebuchet model had the largest percentage error at 8.4%.
ContributorsEstes, Stephen Louis (Co-author) / Estes, Nathan (Co-author) / Liao, Yabin (Thesis director) / Trimble, Steven (Committee member) / Bucholz, Leonard (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2013-05
Description
This executive summary covers the process and results of developing a method to measure packing loads on an evacuation slide system packboard. Since evacuation slides are packed very tightly to fit on the aircraft, the packing process requires large amount of stress on the packboard that holds the slide components. Methods such as load cells, strain gauges, and pressure sensitive films were found to be too inaccurate. An electronic pressure mapping device was found to be the only feasible and accurate method in measuring loads on the packboard.
ContributorsHeitzman, Nicholas James (Author) / Liao, Yabin (Thesis director) / Rajagopalan, Jagannathan (Committee member) / Pope, Tony (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2013-05
Description
The study of the mechanical behavior of nanocrystalline metals using microelectromechanical systems (MEMS) devices lies at the intersection of nanotechnology, mechanical engineering and material science. The extremely small grains that make up nanocrystalline metals lead to higher strength but lower ductility as compared to bulk metals. Effects of strain-rate dependence on the mechanical behavior of nanocrystalline metals are explored. Knowing the strain rate dependence of mechanical properties would enable optimization of material selection for different applications and lead to lighter structural components and enhanced sustainability.
ContributorsHall, Andrea Paulette (Author) / Rajagopalan, Jagannathan (Thesis director) / Liao, Yabin (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
Pseudo-steady state (PSS) flow is a dominant time-dependent flow regime during constant rate production from a closed reservoir. Recently Chen (2016) has obtained an exact analytical solution for the PSS flow of a fully-penetrated fractured vertical well with finite conductivity in an elliptical drainage area. The availability of this analytical solution shortens the computational time required for such a solution by several orders of magnitude. This paper correlates the PSS flow of a fully-penetrated fractured vertical well in square drainage areas to Chen’s solution for an elliptical drainage area using shape factors. Specifically such a shape factor is established by equating the dimensionless productivity index of the PSS flow in a square domain to that in an elliptical domain of identical area. The shape factor was dependent on the proppant number and fracture penetration ratio. Productivity index data for fractured wells with finite conductivity in square drainage area and no skin from Romero et al. (2003) was compared to Chen’s solution assuming equivalent drainage areas and identical proppant numbers, with the penetration ratio as a parameter. A non-linear multi-variable regression analysis results in a unified shape factor function with a correlation coefficient of 0.80 and a minimized sum of squared error of 36.1. The achieved shape factor allows the analytical solution for PSS flow of fractured well in an elliptical drainage area to be applied to square drainage areas. This generalization of the PSS flow solution is of practical significance in fracture design optimization and production rate decline analysis. Future recommendations including testing the accuracy of the shape factor in predictions of proppant numbers not used in analysis using COMSOL™, and increasing the dataset pool to increase the model accuracy.
ContributorsSharma, Ankush (Author) / Chen, Kangping (Thesis director) / Liao, Yabin (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Pseudo-steady state (PSS) flow is a dominant time-dependent flow regime during constant rate production from a closed reservoir. Using Chen's (2016) exact analytical solution for the PSS flow of a fully-penetrated fractured vertical well with finite conductivity in an elliptical drainage area, the computational time required to solve for the PSS constant b_D,PSS is greatly reduced. This constant is the inverse of the productivity index, J_D,PSS, which is often used in modern fracture design optimization. This paper correlates the PSS flow of a fully-penetrated fractured vertical well in triangular drainage areas to Chen's solution for an elliptical drainage area using shape factors. Numerical solutions for the PSS constant are created using COMSOL, which uses a 2D model of the fractured reservoir to output time and pressure data. For equivalent reservoir properties, the numerical data for the triangular reservoir yields a PSS constant that can be directly compared to the PSS constant obtained using Chen's solution. Lack of access to the Subsurface Flow Module of COMSOL greatly limited the number of simulations that could be run, thus more simulations would significantly improve the accuracy and applicability of the triangular shape factor by making it a function of the penetration ratio through nonlinear regression methods.
ContributorsLight, Christopher Ting-Yu (Author) / Chen, Kangping (Thesis director) / Liao, Yabin (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Nissan technicians consistently test steering friction because it is a critical component for understanding and improving chassis dynamic performance. Due to the inaccuracy of a previous machine used, a new apparatus has been constructed to improve the repeatability and efficiency of a steering friction test. The automation and accurate calibration of the test ensures more accurate data compared to the previous machine. This will lead to more accurate decisions regarding the friction applied between the rack and pinion of a vehicle steering system. The Rack Pull Friction Test is an extremely important test performed by the Nissan Chassis Dynamics Technicians. How the driver experiences the car and if it is suitable for their needs is how the company can sell their vehicles. The test relates to how the customer experiences the steering effort of the vehicles when making small steering wheel corrections. It is important that the customer experiences a minimal steering effort on center feel but still strong enough to maintain control of the vehicle. Since the steering ability is a critical component of car handling, the testing must be performed to the optimum ability. Therefore, the attempt to perfect this test is important to improve the quality and the assurance that the vehicle is at maximum ability.
ContributorsApostol, Andre Aaron (Author) / Liao, Yabin (Thesis director) / LaBorde, Brandon (Committee member) / Bickel, Aaron (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Essential to the field of petroleum engineering, well testing is done to determine the important physical characteristics of a reservoir. In the case of a constant production rate (as opposed to a constant pressure), the well pressure drop is a function of both time and the formation's boundary conditions. This pressure drop goes through several distinct stages before reaching steady state or semi-steady state production. This paper focuses on the analysis of a circular well with a closed outer boundary and details the derivation of a new approximation, intended for the transient stage, from an existing steady state solution. This new approximation is then compared to the numerical solution as well as an existing approximate solution. The new approximation is accurate with a maximum 10% margin of error well into the semi-steady state phase with that error decreasing significantly as the distance to the closed external boundary increases. More accurate over a longer period of time than the existing line source approximation, the relevance and applications of this new approximate solution deserve further exploration.
ContributorsKelso, Sean Andrew (Author) / Chen, Kangping (Thesis director) / Liao, Yabin (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / School of Music (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05