Matching Items (43)
Description
Inspired by the design of lightweight cellular structures in nature, humans have made cellular solids for a wide range of engineering applications. Cellular structures composed of solid and gaseous phases, and an interconnected network of solid struts or plates that form the cell's edges and faces. This makes them an ideal candidate for numerous energy absorption applications in the military, transportation, and automotive industries. The objective of the thesis is to study the energy-absorption of multi-material cellular structures. Cellular structures made from Acrylonitrile-Butadiene-Styrene (ABS) a thermoplastic polymer and Thermoplastic Polyurethane (TPU) a thermoplastic elastomer were manufactured using dual extrusion 3D printing. The surface-based structures were designed with partitions to allocate different materials using Matlab and nTopology. Aperiodicity was introduced to the design through perturbation. The specimens were designed for two wall thicknesses - 0.5mm and 1mm, respectively. In total, 18 specimens were designed and 3D printed. All the specimens were tested under quasi-static compression. A detailed analysis was performed to study the energy absorption metrics and draw conclusions, with emphasis on specific energy absorbed as a function of relative density, efficiency, and peak stress of the specimens to hypothesize and validate mechanisms for observed behavior. All the specimens were analyzed to draw comparisons across designs.
ContributorsVarma, Rajeshree Pawan (Author) / Bhate, Dhruv (Thesis advisor) / Shuaib, Abdelrahman (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2021
Description
Polylactic Acid (PLA), a thermoplastic polymer is well-known for its biocompatibility, making it ideal for the manufacturing of biomedical devices. However, the current applications of PLA are commonly limited by its intrinsic polymer characteristics, such as low modulus, mechanical strength, and thermal conductivity. To enhance these physical properties, a biocompatible nanodiamond enhanced PLA filament has been studied. Thermogravimetric analysis was performed to unveil the composition of nanodiamond in the composite. Four printing parameters: nozzle temperature, layer height, infill pattern and printing speed were considered and the Taguchi L9 orthogonal array was implemented for the design of experiments. Fused deposition modeling (FDM) technique was utilized to 3D print the PLA/Nanodiamond samples by altering the four printing parameters considered and were tested according to the standards for tensile strength, flexural strength, and thermal conductivity. Using the Taguchi optimization approach and analysis of variance (ANOVA), the generated experimental data was used to find the optimum set of printing parameters. Finally, cell studies were performed to demonstrate the biocompatibility of PLA/Nanodiamond. All these results could aid in determining the working ranges for FDM fabrication of PLA/Nanodiamond for biomedical applications.
ContributorsPoornabodha, Nikhitha (Author) / Nian, Qiong (Thesis advisor) / Kang, Wonmo (Committee member) / Zhuang, Houlong (Committee member) / Arizona State University (Publisher)
Created2022
Description
humans are currently facing issues with the high level of carbon emissions that will cause global warming and climate change, which worsens the earth’s
environment. Buildings generate nearly 40% of annual global CO2 emissions, of which
28% is from building operations, and 11% from materials and construction. These
emissions must be decreased to protect from further environmental harm. The good news
is there is a way that carbon emissions can be decreased. The use of thermogalvanic
bricks enables electricity generation by the temperature difference between the enclosure
above the ceiling (i.e., the attic in a single-family home) and the living space below. A
ceiling tile prototype was constructed that can make use of this temperature difference to
generate electricity using an electrochemical system called a thermogalvanic cell.
Furthermore, the application of triply periodic minimal surfaces (TPMS) can increase the
thermal resistance of the ceiling tile, which is important for practical applications. Here,
Schwarz P TPMS structures were 3D-printed from polyvinylidene fluoride (PVDF), and
inserted into the electrolyte solution between the electrodes. Graphite was used as
electrodes on the positive and negative sides of the tile, and Iron (II) and Iron (III)
perchlorate salts were used as electrolytes. The maximum generated power was measured
with different porosities of TPMS structure, and one experiment without a TPMS
structure. The results indicated that as the porosity of the TPMS structure increases, the
maximum power decreases. The experiment with no TPMS structure had the largest
maximum power.
ContributorsWen, Chonghan (Author) / Phelan, Patrick (Thesis advisor) / Chen, Candace (Committee member) / Li, Xiangjia (Committee member) / Arizona State University (Publisher)
Created2022
Description
Laser powder bed fusion (LPBF) additive manufacturing (AM) has received widespread attention due to its ability to produce parts with complicated design and better surface finish compared to other additive techniques. LPBF uses a laser heat source to melt layers of powder particles and manufactures a part based on the CAD design. This process can benefit significantly through computational modeling. The objective of this thesis was to understand the thermal transport, and fluid flow phenomena of the process, and to optimize the main process parameters such as laser power and scan speed through a combination of computational, experimental, and statistical analysis. A multi-physics model was built using to model temperature profile, bead geometry and elemental evaporation in powder bed process using a non-gaussian interaction between laser heat source and metallic powder. Owing to the scarcity of thermo-physical properties of metallic powders in literature, thermal conductivity, diffusivity, and heat capacity was experimentally tested up to a temperature of 1400 degrees C. The values were used in the computational model, which improved the results significantly. The computational work was also used to assess the impact of fluid flow around melt pool. Dimensional analysis was conducted to determine heat transport mode at various laser power/scan speed combinations. Convective heat flow proved to be the dominant form of heat transfer at higher energy input due to violent flow of the fluid around the molten region, which can also create keyhole effect. The last part of the thesis focused on gaining useful information about several features of the bead area such as contact angle, porosity, voids and melt pool that were obtained using several combinations of laser power and scan speed. These features were quantified using process learning, which was then used to conduct a full factorial design that allows to estimate the effect of the process parameters on the output features. Both single and multi-response analysis are applied to analyze the output response. It was observed that laser power has more influential effect on all the features. Multi response analysis showed 150 W laser power and 200 mm/s produced bead with best possible features.
ContributorsAhsan, Faiyaz (Author) / Ladani, Leila (Thesis advisor) / Razmi, Jafar (Committee member) / Kwon, Beomjin (Committee member) / Nian, Qiong (Committee member) / Zhuang, Houlong (Committee member) / Arizona State University (Publisher)
Created2021
Description
Ultrasound has become one of the most popular non-destructive characterization tools for soft materials. Compared to conventional ultrasound imaging, quantitative ultrasound has the potential of analyzing detailed microstructural variation through spectral analysis. Because of having a better axial and lateral resolution, and high attenuation coefficient, quantitative high-frequency ultrasound analysis (HFUA) is a very effective tool for small-scale penetration depth application. One of the QUS parameters, peak density had recently shown a promising response with the variation in the soft material microstructure. Acoustic scattering is arguably the most important factor behind different parametric responses in ultrasound spectra. Therefore, to evaluate peak density, acoustic scattering at different frequency levels was investigated. Analytical, computational, and experimental analysis was conducted to observe both single and multiple scattering in different microstructural setups. It was observed that peak density was an effective tool to express different levels of acoustic scattering that occurred through microstructural variation. The feasibility of the peak density parameter was further evaluated in ultrasound C-scan imaging. The study was also extended to detect the relative position of the imaged structure in the direction of wave propagation. For this purpose, a derivative parameter of peak density named mean peak to valley distance (MPVD) was developed to address the limitations of peak density. The study was then focused on detecting soft tissue malignancy. The histology-based computational study of HFUA was conducted to detect various breast tumor (soft tissue) grades. It was observed that both peak density and MPVD parameters could identify tumor grades at a certain level. Finally, the study was focused on evaluating the feasibility of ultrasound parameters to detect asymptotic breast carcinoma i.e., ductal carcinoma in situ (DCIS) in the surgical margin of the breast tumor. In that computational study, breast pathologies were modeled by including all the phases of DCIS. From the similar analysis mentioned above, it was understood that both peak density and MPVD parameters could detect various breast pathologies like ductal hyperplasia, DCIS, and calcification during intraoperative margin analysis. Furthermore, the spectral features of the frequency spectrums from various pathologies also provided significant information to identify them conclusively.
ContributorsPaul, Koushik (Author) / Ladani, Leila (Thesis advisor) / Razmi, Jafar (Committee member) / Holloway, Julianne (Committee member) / Li, Xiangjia (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2022
Description
This dissertation is focused on the rheology scaling of metal particle reinforced polymermatrix composite made of solid and nanoporous metal powders to enable their
continuous 3D printing at high (>60vol%) metal content. There remained a specific
knowledge gap on how to predict successful extrusion with densely packed metals by
utilizing their suspension melt rheological properties. In the first project, the scaling of
the dynamic viscosity of melt-extrudate filaments made of Polylactic acid (PLA) and
gas-atomized solid NiCu powders was studied as a function of the metal’s volumetric
packing and feedstock pre-mixing strategies and correlated to its extrudability
performance, which fitted well with the Krieger-Dougherty analytical model. 63.4
vol% Filaments were produced by employing solution-mixing strategy to reduce
sintered part porosity and shrinkage. After sintering, the linear shrinkage dropped by
76% compared to the physical mixing. By characterizing metal particle reinforced
polymer matrix composite feedstock via flow-sweep rheology, a distinct extension of
shear-thinning towards high shear rates (i.e. 100 s-1) was observed at high metal content
– a result that was attributed to the improved wall adhesion. In comparison, physically mixed filament failed to sustain more than 10s-1 shear rate proving that they were prone
to wall slippage at a higher shear rate, giving an insight into the onset of extrusion
jamming. In the second project, nanoporous copper made out of electroless chemical
dealloying was utilized as fillers, because of their unique physiochemical properties.
The role of capillary imbibition of polymers into metal nanopores was investigated to
understand their effect on density, zero-shear viscosity, and shear thinning. It was
observed that, although the polymeric fluid’s transient concentration regulates its
wettability, the polymer chain length ultimately dictates its melt rheology, which consequentially facilitates densification of pores during vacuum annealing. Finally, it
was demonstrated that higher imbibition into nanopores leads to extrusion failure due
to a combined effect of volumetric packing increase and nanoconfinement, providing a
deterministic materials design tool to enable continuous 3D printing. The outcome of
this study might be beneficial to integrate nanoporous metals into binder-based 3D
printing technology to fabricate interdigitated battery electrodes and multifunctional 3D
printed electronics.
ContributorsHasib, Amm (Author) / Azeredo, Bruno (Thesis advisor) / Song, Kenan (Thesis advisor) / Nian, Qiong (Committee member) / Kwon, Beomjin (Committee member) / Li, Xiangjia (Committee member) / Arizona State University (Publisher)
Created2022
Description
Biomimetics is a field where natural and biological systems are replicated in a lab. The evolved hierarchical designs of the floating leaves of the water fern Salvinia Molesta are taken as inspiration as they reveal excellent dual scale roughness capability which also presents superhydrophobic properties in the nature. The microscale eggbeater-shaped hairs are coated with microscopic granules and nanoscopic wax crystals (dual-scale roughness) and wrinkled hydrophilic patches are coated with wax crystals which are evenly distributed on the terminal of each hair. The combination of features with diverse wettability, such as wrinkled hydrophilic patches atop superhydrophobic eggbeater hairs, makes such structures unique. The hydrophilic patches bind the air-water interface to the tips of the eggbeater hairs and inhibit air bubble formation. Salvinia effect of several Salvinia species has been extensively researched. Superhydrophobicity is attracting increasing attention for various applications. Salvinia exhibit multiscale roughness because of the unique combination of smooth hydrophilic patches on elastic eggbeater structures decorated with nanoscopic wax crystals. However, how to reproduce such hierarchical structures with controllable surface roughness is challenging for current fabrication approaches, which hinders the applications of these superhydrophobic properties as well as multi-scale roughness on surfaces in engineered products.The objective of this research is to fabricate and study the superhydrophobic structures using electrically assisted Vat Photopolymerization. In this project, an electrically assisted Vat Photopolymerization 3D printing (e-VPP-3DP) process was developed to control the surface roughness of printed eggbeater structures with distribution of multi walled carbon nanotubes (MWCNTs) for multi scale roughness. Vat Photopolymerization (VPP) is a Photopolymerization technique where a Photo Curable resin is used to rapidly produce dense photopolymer parts. A fundamental understanding of e-VPP technique to create superhydrophobic structures was studied to identify the relation between geometric morphology and mechanical enhancements of these structures. The correlation between the material properties for different weight percentage mixtures of MWCNT, printing parameters and the mechanical properties like attaching forces, surface roughness and superhydrophobic nature are also identified with this study on bioinspired hierarchical structures.
ContributorsDwarampudi, Gana Sai Kiran Avinash Raj (Author) / Li, Xiangjia (Thesis advisor) / Ladani, Leila (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2022
Description
Advancements in three-dimensional (3D) additive manufacturing techniques have opened up new possibilities for healthcare systems and the medical industry, allowing for the realization of concepts that were once confined to theoretical discussions. Among these groundbreaking research endeavors is the development of intricate magnetic structures that can be actuated through non-invasive methods, including electromagnetic and magnetic actuation. Magnetic actuation, in particular, offers the advantage of untethered operation. In this study, a photopolymerizable resin infused with Fe3O4 oxide nanoparticles is employed in the printing process using the micro-continuous liquid interface production technique. The objective is to optimize the manufacturing process to produce microstructures featuring smooth surfaces and reduced surface porosity, and enhanced flexibility and magnetic actuation. Various intricate structures are fabricated to validate the printing process's capabilities. Furthermore, the assessment of the flexibilty of these 3D-printed structures is conducted in the presence of an external magnetic field using a homemade bending test setup, allowing for a comprehensive characterization of these components. This research serves as a foundation for the future design and development of micro-robots using micro-continuous liquid interface production technique.
ContributorsJha, Ujjawal (Author) / Chen, Xiangfan (Thesis advisor) / Li, Xiangjia (Committee member) / Jin, Kailong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2023
Description
Fatigue fracture is one of the most common types of mechanical failures seen in structures. Considering that fatigue failures usually initiate on surfaces, it is accepted that surface roughness has a detrimental effect on the fatigue life of components. Irregularities on the surface cause stress concentrations and form nucleation sites for cracks. As surface conditions are not always satisfactory, particularly for additively manufactured components, it is necessary to develop a reliable model for fatigue life estimation considering surface roughness effects and assure structural integrity. This research study focuses on extending a previously developed subcycle fatigue crack growth model to include the effects of surface roughness. Unlike other models that consider surface irregularities as series of cracks, the proposed model is unique in the way that it treats the peaks and valleys of surface texture as a single equivalent notch. First, an equivalent stress concentration factor for the roughness was estimated and introduced into an asymptotic interpolation method for notches. Later, a concept called equivalent initial flaw size was incorporated along with linear elastic fracture mechanics to predict the fatigue life of Ti-6Al-4V alloy with different levels of roughness under uniaxial and multiaxial loading conditions. The predicted results were validated using the available literature data. The developed model can also handle variable amplitude loading conditions, which is suggested for future work.
ContributorsKethamukkala, Kaushik (Author) / Liu, Yongming (Thesis advisor) / Jiao, Yang (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2022
Description
Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this work, the solid oxide fuel cell (SOFC) nickel-yttria stabilized zirconia (Ni-YSZ) anode degradation due to poisoning by siloxane was investigated. For this purpose, experiments with different fuels, different deposition substrate materials, different structure of contamination siloxane (cyclic and linear) and entire failure process are conducted in this study. The electrochemical and material characterization methods, such as Electrochemical Impedance Spectroscopy (EIS), Scanning Electron Microscope- Wavelength Dispersive Spectrometers (SEM-WDS), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Raman spectroscopy, were applied to investigate the anode degradation behavior. The electrochemical characterization results show that the SOFCs performance degradation caused by siloxane contamination is irreversible under bio-syngas condition. An equivalent circuit model (ECM) is developed based on electrochemical characterization results. Based on the Distribution of Relaxation Time (DRT) method, the detailed microstructure parameter changes are evaluated corresponding to the ECM results. The results contradict the previously proposed siloxane degradation mechanism as the experimental results show that water can inhibit anode deactivation. For anode materials, Ni is considered a major factor in siloxane deposition reactions in Ni-YSZ anode. Based on the results of XPS, XRD and WDS analysis, an initial layer of carbon deposition develops and is considered a critical process for the siloxane deposition reaction. Based on the experimental results in this study and previous studies about siloxane deposition on metal oxides, the proposed siloxane deposition process occurs in stages consisting of the siloxane adsorption, initial carbon deposition, siloxane polymerization and amorphous silicon dioxide deposition.
ContributorsTian, Jiashen (Author) / Milcarek, Ryan J. (Thesis advisor) / Muhich, Christopher (Committee member) / Wang, Liping (Committee member) / Phelan, Patrick (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2022