Matching Items (2)
Filtering by
- All Subjects: Finite Element Modelling
- Creators: Rajan, Subramaniam
Description
Over the past few decades there has been significant interest in the design and construction of hypersonic vehicles. Such vehicles exhibit strongly coupled aerodynamics, acoustics, heat transfer, and structural deformations, which can take significant computational efforts to simulate using standard finite element and computational fluid dynamics techniques. This situation has lead to development of various reduced order modelling (ROM) methods which reduce the parameter space of these simulations so they can be run more quickly. The planned hypersonic vehicles will be constructed by assembling a series of sub-structures, such as panels and stiffeners, that will be welded together creating built-up structures.In this light, the focus of the present investigation is on the formulation and validation of nonlinear reduced order models (NLROMs) of built-up structures that include nonlinear geometric effects induced by the large loads/large response. Moreover, it is recognized that gaps between sub-structures could result from the these intense loadings can thus the inclusion of the nonlinearity introduced by contact separation will also be addressed. These efforts, application to built-up structures and inclusion of contact nonlinearity, represent novel developments of existing NLROM strategies. A hat stiffened panel is selected as a representative example of built-up structure and a compact NRLOM is successfully constructed for this structure which exhibited a potential internal resonance. For the investigation of contact nonlinearity, two structural models were used: a cantilevered beam which can contact several stops and an overlapping plate model which can exhibit the opening/closing of a gap. Successful NLROMs were constructed for these structures with the basis for the plate model determined as a two-step process, i.e., considering the plate without gap first and then enriching the corresponding basis to account for opening of the gap. Adaptions were then successfully made to a Newton-Raphson solver to properly account for contact and the associated forces in static predictions by NLROMs.
ContributorsWainwright, Bret Aaron (Author) / Mignolet, Marc P (Thesis advisor) / Oswald, Jay (Committee member) / Peralta, Pedro (Committee member) / Spottswood, Stephen (Committee member) / Rajan, Subramaniam (Committee member) / Arizona State University (Publisher)
Created2021
Effects of Aggregate Packing Density on the Mechanical Properties of Ultra-High Performance Concrete
Description
Cement is a remarkable construction material that allows for the formation of complex geometric forms while still providing adequate strength properties to be used as a structural material. This research focuses on Ultra-High Performance Concrete (UHPC) which is a specialized class of cementitious material that exhibits exceptional strength and durability properties when compared to standard concrete. UHPC achieves these properties through a combination of high cement content, high particle packing density, low water-to-cement ratio, and the additional of special admixtures such as superplasticizer. These components all serve the purpose of increasing UHPC strength and mechanical properties by helping achieve much high material densities than other forms of concrete.
In this study, aggregate material evaluation and testing was conducted for use in the mix design of the UHPC mixes that were carried out and tested. Each mix employed the same general UHPC mixture design with the only difference being the aggregate proportions of #4, #8, and #10 nominal size aggregates. The purpose of using a UHPC mix design that was independent of aggregate proportioning was to evaluate the effects of varying aggregate particle packing densities. Increased particle packing density of UHPC provide improved mechanical performance by decreasing the distance between particle within cured UHPC, thereby producing significant increases in compressive strength, tensile strength, durability, and service life of UHPC when compared to standard concrete. For this study, particle packing densities of 0.509, 0.521, 0.540, and 0.552 were employed and evaluated on the basis of compressive strength and tensile strength to determine the optimum UHPC mix design.
In this study, aggregate material evaluation and testing was conducted for use in the mix design of the UHPC mixes that were carried out and tested. Each mix employed the same general UHPC mixture design with the only difference being the aggregate proportions of #4, #8, and #10 nominal size aggregates. The purpose of using a UHPC mix design that was independent of aggregate proportioning was to evaluate the effects of varying aggregate particle packing densities. Increased particle packing density of UHPC provide improved mechanical performance by decreasing the distance between particle within cured UHPC, thereby producing significant increases in compressive strength, tensile strength, durability, and service life of UHPC when compared to standard concrete. For this study, particle packing densities of 0.509, 0.521, 0.540, and 0.552 were employed and evaluated on the basis of compressive strength and tensile strength to determine the optimum UHPC mix design.
ContributorsThornburg, Cody Michael (Author) / Neithalath, Narayanan (Thesis director) / Rajan, Subramaniam (Committee member) / Civil, Environmental and Sustainable Eng Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05