Matching Items (10)
Description
Semiconductor nanowires are important candidates for highly scaled three dimensional electronic devices. It is very advantageous to combine their scaling capability with the high yield of planar CMOS technology by integrating nanowire devices into planar circuits. The purpose of this research is to identify the challenges associated with the fabrication of vertically oriented Si and Ge nanowire diodes and modeling their electrical behavior so that they can be utilized to create unique three dimensional architectures that can boost the scaling of electronic devices into the next generation. In this study, vertical Ge and Si nanowire Schottky diodes have been fabricated using bottom-up vapor-liquid-solid (VLS) and top-down reactive ion etching (RIE) approaches respectively. VLS growth yields nanowires with atomically smooth sidewalls at sub-50 nm diameters but suffers from the problem that the doping increases radially outwards from the core of the devices. RIE is much faster than VLS and does not suffer from the problem of non-uniform doping. However, it yields nanowires with rougher sidewalls and gets exceedingly inefficient in yielding vertical nanowires for diameters below 50 nm. The I-V characteristics of both Ge and Si nanowire diodes cannot be adequately fit by the thermionic emission model. Annealing in forming gas which passivates dangling bonds on the nanowire surface is shown to have a considerable impact on the current through the Si nanowire diodes indicating that fixed charges and traps on the surface of the devices play a major role in determining their electrical behavior. Also, due to the vertical geometry of the nanowire diodes, electric field lines originating from the metal and terminating on their sidewalls can directly modulate their conductivity. Both these effects have to be included in the model aimed at predicting the current through vertical nanowire diodes. This study shows that the current through vertical nanowire diodes cannot be predicted accurately using the thermionic emission model which is suitable for planar devices and identifies the factors needed to build a comprehensive analytical model for predicting the current through vertically oriented nanowire diodes.
ContributorsChandra, Nishant (Author) / Goodnick, Stephen M (Thesis advisor) / Tracy, Clarence J. (Committee member) / Yu, Hongbin (Committee member) / Ferry, David K. (Committee member) / Arizona State University (Publisher)
Created2014
Description
Total dose sensing systems (or radiation detection systems) have many applications,
ranging from survey monitors used to supervise the generated radioactive waste at
nuclear power plants to personal dosimeters which measure the radiation dose
accumulated in individuals. This dissertation work will present two different types of
novel devices developed at Arizona State University for total dose sensing applications.
The first detector technology is a mechanically flexible metal-chalcogenide glass (ChG)
based system which is fabricated on low cost substrates and are intended as disposable
total dose sensors. Compared to existing commercial technologies, these thin film
radiation sensors are simpler in form and function, and cheaper to produce and operate.
The sensors measure dose through resistance change and are suitable for applications
such as reactor dosimetry, radiation chemistry, and clinical dosimetry. They are ideal for
wearable devices due to the lightweight construction, inherent robustness to resist
breaking when mechanically stressed, and ability to attach to non-flat objects. Moreover,
their performance can be easily controlled by tuning design variables and changing
incorporated materials. The second detector technology is a wireless dosimeter intended
for remote total dose sensing. They are based on a capacitively loaded folded patch
antenna resonating in the range of 3 GHz to 8 GHz for which the load capacitance varies
as a function of total dose. The dosimeter does not need power to operate thus enabling
its use and implementation in the field without requiring a battery for its read-out. As a
result, the dosimeter is suitable for applications such as unattended detection systems
destined for covert monitoring of merchandise crossing borders, where nuclear material
tracking is a concern. The sensitive element can be any device exhibiting a known
variation of capacitance with total ionizing dose. The sensitivity of the dosimeter is
related to the capacitance variation of the radiation sensitive device as well as the high
frequency system used for reading. Both technologies come with the advantage that they
are easy to manufacture with reasonably low cost and sensing can be readily read-out.
ranging from survey monitors used to supervise the generated radioactive waste at
nuclear power plants to personal dosimeters which measure the radiation dose
accumulated in individuals. This dissertation work will present two different types of
novel devices developed at Arizona State University for total dose sensing applications.
The first detector technology is a mechanically flexible metal-chalcogenide glass (ChG)
based system which is fabricated on low cost substrates and are intended as disposable
total dose sensors. Compared to existing commercial technologies, these thin film
radiation sensors are simpler in form and function, and cheaper to produce and operate.
The sensors measure dose through resistance change and are suitable for applications
such as reactor dosimetry, radiation chemistry, and clinical dosimetry. They are ideal for
wearable devices due to the lightweight construction, inherent robustness to resist
breaking when mechanically stressed, and ability to attach to non-flat objects. Moreover,
their performance can be easily controlled by tuning design variables and changing
incorporated materials. The second detector technology is a wireless dosimeter intended
for remote total dose sensing. They are based on a capacitively loaded folded patch
antenna resonating in the range of 3 GHz to 8 GHz for which the load capacitance varies
as a function of total dose. The dosimeter does not need power to operate thus enabling
its use and implementation in the field without requiring a battery for its read-out. As a
result, the dosimeter is suitable for applications such as unattended detection systems
destined for covert monitoring of merchandise crossing borders, where nuclear material
tracking is a concern. The sensitive element can be any device exhibiting a known
variation of capacitance with total ionizing dose. The sensitivity of the dosimeter is
related to the capacitance variation of the radiation sensitive device as well as the high
frequency system used for reading. Both technologies come with the advantage that they
are easy to manufacture with reasonably low cost and sensing can be readily read-out.
ContributorsMahmud, Adnan, Ph.D (Author) / Barnaby, Hugh J. (Thesis advisor) / Kozicki, Michael N (Committee member) / Gonzalez-Velo, Yago (Committee member) / Goryll, Michael (Committee member) / Alford, Terry (Committee member) / Arizona State University (Publisher)
Created2017
Description
The construction industry is becoming more aware of its impact on the environment. It has become more sensitive to how it operates and how it can reduce the carbon footprint of the construction process. This research identifies the source of and quantities of the carbon emissions created by an operating modular home fabrication plant in producing, transporting and installing modular structures. This study demonstrates how to measure the carbon footprint created in the production of a modular home. It quantifies and reports the results on a home, on a single module and on a per square foot basis. The primary conclusions of this study are: a) electricity was found to be the largest energy source used in this fabrication process; b) the modular fabrication process consumes a significant amount of electrical energy per month; c) production volume has a bearing on the carbon footprint of each home since the carbon footprint for each period is allocated to every home produced in that period; and d) transportation of fabricated modules and set-up add to the carbon footprint. Further, a carbon calculator was produced and is included with the study. The tool calculates the impact of energy consumption on the carbon footprint of a modular factory or a modular home. It may be expanded to other process driven fabrication entities. This research is valuable to developers and builders who wish to measure the carbon impact of a modular new home delivery system. The study also provides a methodology for modular home fabricators to measure the carbon footprint of their factories and factory production.
ContributorsKawecki, Leonard Robert (Author) / Bashford, Howard H (Thesis advisor) / Davis, Joseph (Committee member) / Ernzen, James (Committee member) / Arizona State University (Publisher)
Created2010
ContributorsAcevedo, Rodrigo (Author, Co-author) / Rajadas, John (Thesis director) / Nam, Changho (Committee member) / Barrett, The Honors College (Contributor) / Engineering Programs (Contributor)
Created2021-12
ContributorsAcevedo, Rodrigo (Author, Co-author) / Rajadas, John (Thesis director) / Nam, Changho (Committee member) / Barrett, The Honors College (Contributor) / Engineering Programs (Contributor)
Created2021-12
Description
After the wind tunnels in the SIM building and Innovation Hub were donated or lost, Dr. Rajadas requested a new wind tunnel be designed, developed, and fabricated using facilities and resources available on ASU Polytech. Over 6 months, a single student was tasked with running the CAD modeling process, undergoing the revision stages, and welding/fabricating the tunnel by the end of Fall 2021.
ContributorsAcevedo, Rodrigo (Author, Co-author) / Rajadas, John (Thesis director) / Nam, Changho (Committee member) / Barrett, The Honors College (Contributor) / Engineering Programs (Contributor)
Created2021-12
Description
This thesis explores the possibility of fabricating superconducting tunnel junctions (STJ) using double angle evaporation using an E-beam system. The traditional method of making STJs use a shadow mask to deposit two films requires the breaking of the vacuum of the main chamber. This technique has given bad results and proven to be a tedious process. To improve on this technique, the E-beam system was modified by adding a load lock and transfer line to perform the multi-angle deposition and in situ oxidation in the load lock without breaking the vacuum of the main chamber. Bilayer photolithography process was used to prepare a pattern for double angle deposition for the STJ. The overlap length could be easily controlled by varying the deposition angles. The low-temperature resistivity measurement and scanning electron microscope (SEM) characterization showed that the deposited films were good. However, I-V measurement for tunnel junction did not give expected results for the quality of the fabricated STJs. The main objective of modifying the E-beam system for multiple angle deposition was achieved. It can be used for any application that requires angular deposition. The motivation for the project was to set up a system that can fabricate a device that can be used as a phonon spectrometer for phononic crystals. Future work will include improving the quality of the STJ and fabricating an STJs on both sides of a silicon substrate using a 4-angle deposition.
ContributorsRana, Ashish (Author) / Wang, Robert Y (Thesis advisor) / Newman, Nathan (Committee member) / Wang, Liping (Committee member) / Arizona State University (Publisher)
Created2019
Description
The current push towards integrating new digital fabrication techniques into all parts of daily life has raised concerns about the changing role of the craftsperson in creative making. The goal of this dissertation is to gain insight into how new technologies can be incorporated into creative practices in a way that effectively supports the goals and workflows of practitioners. To do so, I explore three different cases in which 3D printing, a tool by which complex 3D objects are fabricated from digital designs, is used in tandem with traditional creative practices. Each project focuses on a different way to incorporate 3D printed objects, whether it be as a visualization for artists’ processes, a substitute medium for finished artworks, or as a step toward a larger fabrication workflow. Through this research, I discover how the integration of 3D printing affects creative processes, explore how these changes influence how and why practitioners engage in artistic practices, and gain insight into directions for future technological innovations.
ContributorsWeiler, Jennifer Joyce (Author) / Ingalls, Todd (Thesis advisor) / Kuznetsov, Stacey (Thesis advisor) / Neubauer, Mary B (Committee member) / Nam, Hye Y (Committee member) / Arizona State University (Publisher)
Created2020
Description
For the basis of this project, a particular interest is taken in soft robotic arms for the assistance of daily living tasks. A detailed overview and function of the soft robotic modules comprised within the soft robotic arm will be the main focus. In this thesis, design and fabrication methods of fabric reinforced textile actuators (FRTAs) have their design expanded. Original design changes to the actuators that improve their performance are detailed in this report. This report also includes an explanation of how the FRTA’s are made, explaining step by step how to make each sub-assembly and explain its function. Comparisons between the presented module and the function of the soft poly limb from previous works are also expanded. Various forms of testing, such as force testing, range of motion testing, and stiffness testing are conducted on the soft robotic module to provide insights into its performance and characteristics. Lastly, present plans for various forms of future work and integration of the soft robotic module into a full soft robotic arm assembly are discussed.
ContributorsSeidel, Sam (Author) / Zhang, Wenlong (Thesis director) / Sugar, Thomas (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
In the realm of biosensors and nanotechnology, deoxyribonucleic acid (DNA) nanosensors have demonstrated tremendous potential across diverse real-world applications, from environmental monitoring to healthcare diagnostics. Fabrication of nanosensors allows assembling and designing of DNA molecules at nanoscale with high precision and versatility. Such fabricating DNA nanosensors are quite time consuming. Hence it is important to store them in batches. However synthetic DNA molecules can be prone to degradation over time, especially when exposed to various environmental factors like light, heat, or any other chemical contaminants. To address this issue, a shelf life study of DNA nanosensors using various lyoprotectant conditions was carried out to determine the long term stability of such sensors. This study involves fabrication of the dendritic, double - stranded DNA nanosensors involving five strands L1 through L5 conjugated with pHAb fluorophores via N-hydroxysuccinimide ester reaction and acetylcholinesterase (AChE) enzyme, a core component of the sensor. This sensor was originally a fluorescent ACh-selective nanosensors designed to accommodate the BTX ligand, AChE to image the ACh release in the submandibular region of the living mice to report real time quantitative endogenous ACh release triggered by electrical stimulation. AChE enzyme is a good receptor to detect acetylcholine release in the Peripheral Nervous System (PNS). The primary objective of the study was to assess DNA nanosensors with AChE, however due to the intricate interactions, non-specific binding and cost-effectiveness, the shelf life study was carried out separately. The shelf study includes observing DNA nanosensors with different disaccharide lyoprotectants like trehalose and sucrose that were analyzed under different temperature conditions: room temperature (25ºC) and at 50 ºC for different time intervals, over a week time. Also, Observing AChE with various protectants under 50 ºC with and without lyoprotectants for various time intervals like 24 hours and 48 hours. To replicate the real-world transit scenarios, the study also involves test-shipment of the samples with lyoprotectants for 2-3 days to both cross-country and local (in-state). As a result, the use of lyoprotectants, particularly trehalose, has proven to be more resilient and effective in preserving the stability and integrity of DNA nanosensors and Acetylcholinesterase (AChE) enzymes
ContributorsSrinivasan, Nikita (Author) / Clark, Heather A (Thesis advisor) / Ma, Kristine Y (Committee member) / Beeman, Scott (Committee member) / Arizona State University (Publisher)
Created2023