Matching Items (17)
Filtering by
- All Subjects: robotics
- Creators: Aukes, Daniel
Description
This is a report on an experiment that examines if the principles of multimedia learning outlined in Richard E. Mayer’s journal article, “Using multimedia for e-learning”, located in the Journal of Computer Assisted Learning would apply to haptic feedback used for haptic robotic operation. This was tested by developing and using a haptic robotic manipulator known as the Haptic Testbed (HTB). The HTB is a manipulator designed to emulate human hand movement for haptic testing purposes and features an index finger and thumb for the right hand. Control is conducted through a Leap Motion Controller, a visual sensor that uses infrared lights and cameras to gather various data about hands it can see. The goal of the experiment was to have test subjects complete a task where they shifted objects along a circuit of positions where they were measured on time to complete the circuit as well as accuracy in reaching the individual points. Analysis of subject responses to surveys as well as performance during the experiment showed haptic feedback during training improving initial performance of individuals as well as lowering mental effort and mental demand during said training. The findings of this experiment showed support for the hypothesis that Mayer’s principles do apply to haptic feedback in training for haptic robotic manipulation. One of the implications of this experiment would be the possibility for haptics and tactile senses to be an applicable sense for Mayer’s principles of multimedia learning as most of the current work in the field is mostly focused on visual or auditory senses. If the results of the experiment were replicated in a future experiment it would provide support to the hypothesis that the principles of multimedia learning can be utilized to improve the training of haptic robotic operation.
ContributorsGiam, Connor Dallas (Author) / Craig, Scotty (Thesis director) / Sodemann, Angela (Committee member) / Engineering Programs (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Multi-material manufacturing combines multiple fabrication processes to produce individual parts that can be made up of several different materials. These processes can include both additive and subtractive manufacturing methods as well as embedding other components during manufacturing. This yields opportunities for creating single parts that can take the place of an assembly of parts produced using conventional techniques. Some example applications of multi-material manufacturing include parts that are produced using one process then machined to tolerance using another, parts with integrated flexible joints, or parts that contain discrete embedded components such as reinforcing materials or electronics.
Multi-material manufacturing has applications in robotics because, with it, mechanisms can be built into a design without adding additional moving parts. This allows for robot designs that are both robust and low cost, making it a particularly attractive method for education or research. 3D printing is of particular interest in this area because it is low cost, readily available, and capable of easily producing complicated part geometries. Some machines are also capable of depositing multiple materials during a single process. However, up to this point, planning the steps to create a part using multi-material manufacturing has been done manually, requiring specialized knowledge of the tools used. The difficulty of this planning procedure can prevent many students and researchers from using multi-material manufacturing.
This project studied methods of automating the planning of multi-material manufacturing processes through the development of a computational framework for processing 3D models and automatically generating viable manufacturing sequences. This framework includes solid operations and algorithms which assist the designer in computing manufacturing steps for multi-material models. This research is informing the development of a software planning tool which will simplify the planning needed by multi-material fabrication, making it more accessible for use in education or research.
In our paper, Voxel-Based Cad Framework for Planning Functionally Graded and Multi-Step Rapid Fabrication Processes, we present a new framework for representing and computing functionally-graded materials for use in rapid prototyping applications. We introduce the material description itself, low-level operations which can be used to combine one or more geometries together, and algorithms which assist the designer in computing manufacturing-compatible sequences. We then apply these techniques to several example scenarios. First, we demonstrate the use of a Gaussian blur to add graded material transitions to a model which can then be produced using a multi-material 3D printing process. Our second example highlights our solution to the problem of inserting a discrete, off-the-shelf part into a 3D printed model during the printing sequence. Finally, we implement this second example and manufacture two example components.
Multi-material manufacturing has applications in robotics because, with it, mechanisms can be built into a design without adding additional moving parts. This allows for robot designs that are both robust and low cost, making it a particularly attractive method for education or research. 3D printing is of particular interest in this area because it is low cost, readily available, and capable of easily producing complicated part geometries. Some machines are also capable of depositing multiple materials during a single process. However, up to this point, planning the steps to create a part using multi-material manufacturing has been done manually, requiring specialized knowledge of the tools used. The difficulty of this planning procedure can prevent many students and researchers from using multi-material manufacturing.
This project studied methods of automating the planning of multi-material manufacturing processes through the development of a computational framework for processing 3D models and automatically generating viable manufacturing sequences. This framework includes solid operations and algorithms which assist the designer in computing manufacturing steps for multi-material models. This research is informing the development of a software planning tool which will simplify the planning needed by multi-material fabrication, making it more accessible for use in education or research.
In our paper, Voxel-Based Cad Framework for Planning Functionally Graded and Multi-Step Rapid Fabrication Processes, we present a new framework for representing and computing functionally-graded materials for use in rapid prototyping applications. We introduce the material description itself, low-level operations which can be used to combine one or more geometries together, and algorithms which assist the designer in computing manufacturing-compatible sequences. We then apply these techniques to several example scenarios. First, we demonstrate the use of a Gaussian blur to add graded material transitions to a model which can then be produced using a multi-material 3D printing process. Our second example highlights our solution to the problem of inserting a discrete, off-the-shelf part into a 3D printed model during the printing sequence. Finally, we implement this second example and manufacture two example components.
ContributorsBrauer, Cole D (Author) / Aukes, Daniel (Thesis director) / Sodemann, Angela (Committee member) / Engineering Programs (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The field of robotics is rapidly expanding, and with it, the methods of teaching and introducing students must also advance alongside new technologies. There is a challenge in robotics education, especially at high school levels, to expose them to more modern and practical robots. One way to bridge this gap is human-robot interaction for a more hands-on and impactful experience that will leave students more interested in pursuing the field. Our project is a Robotic Head Kit that can be used in an educational setting to teach about its electrical, mechanical, programming, and psychological concepts. We took an existing robot head prototype and further advanced it so it can be easily assembled while still maintaining human complexity. Our research for this project dove into the electronics, mechanics, software, and even psychological barriers present in order to advance the already existing head design. The kit we have developed combines the field of robotics with psychology to create and add more life-like features and functionality to the robot, nicknamed "James Junior." The goal of our Honors Thesis was to initially fix electrical, mechanical, and software problems present. We were then tasked to run tests with high school students to validate our assembly instructions while gathering their observations and feedback about the robot's programmed reactions and emotions. The electrical problems were solved with custom PCBs designed to power and program the existing servo motors on the head. A new set of assembly instructions were written and modifications to the 3D printed parts were made for the kit. In software, existing code was improved to implement a user interface via keypad and joystick to give students control of the robot head they construct themselves. The results of our tests showed that we were not only successful in creating an intuitive robot head kit that could be easily assembled by high school students, but we were also successful in programming human-like expressions that could be emotionally perceived by the students.
ContributorsRathke, Benjamin (Co-author) / Rivera, Gerardo (Co-author) / Sodemann, Angela (Thesis director) / Itagi, Manjunath (Committee member) / Engineering Programs (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Soft robots currently rely on additional hardware such as pumps, high voltage supplies,light generation sources, and magnetic field generators for their operation. These components
resist miniaturization; thus, embedding them into small-scale soft robots is challenging.
This issue limits their applications, especially in hyper-redundant mobile robots. This
dissertation aims at addressing some of the challenges associated with creating miniature,
untethered soft robots that can function without any attachment to external power supplies
or receiving any control signals from outside sources. This goal is accomplished by introducing
a soft active material and a manufacturing method that together, facilitate the
miniaturization of soft robots and effectively supports their autonomous, mobile operation
without any connection to outside equipment or human intervention.
The soft active material presented here is a hydrogel based on a polymer called poly(Nisopropylacrylamide)
(PNIPAAm). This hydrogel responds to changes in the temperature
and responds by expanding or contracting. A major challenge regarding PNIPAAm-based
hydrogels is their slow response. This challenge is addressed by introducing a mixedsolvent
photo-polymerization technique that alters the pore structure of the hydrogel and
facilitates the water transport and thus the rate of volume change. Using this technique,
the re-swelling response time of hydrogels is reduced to 2:4min – over 25 times faster
than hydrogels demonstrated previously. The material properties of hydrogels including
their response rate and Young’s modulus are tuned simultaneously. The one-step photopolymerization
using UV light is performed in under 15 sec, which is a significant improvement
over thermo-polymerization, which takes anywhere between a few minutes to
several hours. Photopolymerization is key towards simplifying recipes, improving access
to these techniques, and making them tractable for iterative design processes.
To address the manufacturing challenges, soft voxel actuators (SVAs) are presented.
SVAs are actuated by electrical currents through Joule heating. SVAs weighing only 100 mg require small footprint microcontrollers for their operation which can be embedded
in the robotic system. The advantages of hydrogel-based SVAs are demonstrated through
different robotic platforms namely a hyper-redundant manipulator with 16 SVAs, an untethered
miniature robot for mobile underwater applications using 8 SVAs, and a gripper
using 32 SVAs.
ContributorsKhodambashi, Roozbeh (Author) / Aukes, Daniel (Thesis advisor) / Sugar, Thomas (Committee member) / Nam, Changho (Committee member) / Arizona State University (Publisher)
Created2021
Description
In nature, some animals have an exoskeleton that provides protection, strength, and stability to the organism, but in engineering, an exoskeleton refers to a device that augments or aids human ability. However, the method of controlling these devices has been a challenge historically. Depending on the objective, control systems for exoskeletons have ranged from devices as simple spring-loaded systems to using sensors such as electromyography (EMG). Despite EMGs being very common, force sensing resistors (FSRs) can be used instead. There are multiple types of exoskeletons that target different areas of the human body, and the targeted area depends on the need of the device. Usually, the devices are developed for either medical or military usage; for this project, the focus is on medical development of an automated elbow joint to assist in rehabilitation. This thesis is a continuation of my ASU Barrett honors thesis, Upper-Extremity Exoskeleton. While working on my honors thesis, I helped develop a design for an upper extremity exoskeleton based on the Wilmer orthosis design for Mayo Clinic. Building upon the design of an orthosis, for the master’s thesis, I developed an FSR control system that is designed using a Wheatstone bridge circuit that can provide a clean reliable signal as compared to the current EMG setup.
ContributorsCarlton, Bryan (Author) / Sugar, Thomas (Thesis advisor) / Aukes, Daniel (Committee member) / Hollander, Kevin (Committee member) / Arizona State University (Publisher)
Created2023
Description
This dissertation introduces and examines Soft Curved Reconfigurable Anisotropic Mechanisms (SCRAMs) as a solution to address actuation, manufacturing, and modeling challenges in the field of soft robotics, with the aim of facilitating the broader implementation of soft robots in various industries. SCRAM systems utilize the curved geometry of thin elastic structures to tackle these challenges in soft robots. SCRAM devices can modify their dynamic behavior by incorporating reconfigurable anisotropic stiffness, thereby enabling tailored locomotion patterns for specific tasks. This approach simplifies the actuation of robots, resulting in lighter, more flexible, cost-effective, and safer soft robotic systems. This dissertation demonstrates the potential of SCRAM devices through several case studies. These studies investigate virtual joints and shape change propagation in tubes, as well as anisotropic dynamic behavior in vibrational soft twisted beams, effectively demonstrating interesting locomotion patterns that are achievable using simple actuation mechanisms. The dissertation also addresses modeling and simulation challenges by introducing a reduced-order modeling approach. This approach enables fast and accurate simulations of soft robots and is compatible with existing rigid body simulators. Additionally, this dissertation investigates the prototyping processes of SCRAM devices and offers a comprehensive framework for the development of these devices. Overall, this dissertation demonstrates the potential of SCRAM devices to overcome actuation, modeling, and manufacturing challenges in soft robotics. The innovative concepts and approaches presented have implications for various industries that require cost-effective, adaptable, and safe robotic systems. SCRAM devices pave the way for the widespread application of soft robots in diverse domains.
ContributorsJiang, Yuhao (Author) / Aukes, Daniel (Thesis advisor) / Berman, Spring (Committee member) / Lee, Hyunglae (Committee member) / Marvi, Hamidreza (Committee member) / Srivastava, Siddharth (Committee member) / Arizona State University (Publisher)
Created2023
Description
Undulatory locomotion is a unique form of swimming that generates thrust through the propagation of a wave through a fish’s body. The proposed device utilizes a constrained compliant material with a single actuator to generate an undulatory motion. This paper draws inspiration from Anguilliformes and discusses the kinematics and dynamics of wave propagation of an underwater robot. A variety of parameters are explored through modeling and are optimized for thrust generation to better understand the device. This paper validates the theoretical spine behavior through experimentation and provides a path forward for future development in device optimization for various applications. Previous work developed devices that utilized either paired soft actuators or multiple redundant classical actuators that resulted in a complex prototype with intricate controls. The work of this paper contrasts with prior work in that it aims to achieve undulatory motion through passive actuation from a single actively driven point which simplifies the control. Through this work, the goal is to further explore low-cost soft robotics via bistable mechanisms, continuum material properties, and simplified modeling practices.
ContributorsKwan, Anson (Author) / Aukes, Daniel (Thesis advisor) / Zhang, Wenlong (Committee member) / Marvi, Hamid (Committee member) / Arizona State University (Publisher)
Created2023
Description
Unmanned aerial vehicles (UAVs) have revolutionized various fields, but their use in dynamic environments is still limited due to safety concerns arising from sensor malfunctions and localization errors. Inspired by birds, which exhibit unparalleled maneuverability and adaptability to dynamic environments by synergizing mechanical compliance with control, this research focused on developing a new generation of bio-inspired soft/compliant UAVs with mechanical intelligence that can withstand collisions and enable aerial interaction. The proposed approach is to harness collision energies and switch into the next favorable configuration, which helps retain stability and successfully fly even in the presence of external forces. It investigated various types of active/passive reconfigurable UAVs to demonstrate this idea. The first approach looked into designs of compliant reconfigurable quadrotors by employing springs which can reduce their dimension under external forces, thereby sustaining 2D planar collision forces and enabling flights through narrow gaps in a squeeze-and-fly manner. Next, fabric-based soft UAVs made of pneumatic beams were successfully explored to design lightweight and collision-resilient quadrotors to demonstrate 3D collision-resilience and impact-based perching. This research contributes to thorough modeling of the unique dynamics of these reconfigurable quadrotors and proposes various adaptive and learning-based controllers for robust low-level tracking. Finally, these controllers were integrated into a novel collision-inclusive motion planning framework based-on optimal control theory to perform physical interaction tasks, such as contact-based navigation, mapping, and inspection. In essence, this research redefines safety for UAVs and expands their capabilities for contact-rich tasks.
ContributorsPatnaik, Karishma (Author) / Zhang, Wennlong (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Aukes, Daniel (Committee member) / Arizona State University (Publisher)
Created2023
Description
Foldable robots have gained popularity in recent years due to their versatility and portability. However, the use of composite hinges in these systems has posed challenges in terms of manufacturing complexity and cost. Historically, single material robots were very limited due to the fact that both the link and the hinge are made with the same material and striking a balance with stiffness of the link and flexibility of the hinge has been very difficult. Hinges would undergo fatigue within hundreds of cycles and show non-linear wear and physical properties. This research proposes an innovative approach to simplify foldable robotics by replacing composite hinges with single material flexure hinges. The proposed hinges are manufactured using a CO2 laser cutter and are designed to enhance performance and reduce costs over previous single-layer-hinges. A mathematical model has been developed to predict the behavior of the hinges and tune them to the desired requirements. Experimental results show that the proposed hinges offer improved flexibility and durability compared to single-layer hinges, while reducing the manufacturing cost and complexity associated with multi-layer hinges. This research contributes to the advancement of foldable robotics by offering a simplified and cost-effective solution that can foster innovation in various applications.
ContributorsKanchan, Viraj (Author) / Aukes, Daniel (Thesis advisor) / Redkan, Sangram (Committee member) / Sugar, Thmas (Committee member) / Arizona State University (Publisher)
Created2023
Description
This thesis presents the design and testing of a soft robotic device for water utility pipeline inspection. The preliminary findings of this new approach to conventional methods of pipe inspection demonstrate that a soft inflatable robot can successfully traverse the interior space of a range of diameter pipes using pneumatic and without the need to adjust rigid, mechanical components. The robot utilizes inflatable soft actuators with an adjustable radius which, when pressurized, can provide a radial force, effectively anchoring the device in place. Additional soft inflatable actuators translate forces along the center axis of the device which creates forward locomotion when used in conjunction with the radial actuation. Furthermore, a bio-inspired control algorithm for locomotion allows the robot to maneuver through a pipe by mimicking the peristaltic gait of an inchworm. This thesis provides an examination and evaluation of the structure and behavior of the inflatable actuators through computational modeling of the material and design, as well as the experimental data of the forces and displacements generated by the actuators. The theoretical results are contrasted with/against experimental data utilizing a physical prototype of the soft robot. The design is anticipated to enable compliant robots to conform to the space offered to them and overcome occlusions from accumulated solids found in pipes. The intent of the device is to be used for inspecting existing pipelines owned and operated by Salt River Project, a Phoenix-area water and electricity utility provider.
ContributorsAdams, Wade Silas (Author) / Aukes, Daniel (Thesis advisor) / Sugar, Thomas (Committee member) / Zhang, Wenlong (Committee member) / Arizona State University (Publisher)
Created2019