Matching Items (4)
Filtering by
- All Subjects: Electrical Engineering
- Genre: Masters Thesis
Description
Data transmission and reception has become an important aspect in day-to-day communication. With advancement in technology, it dictates the need for accurate data transmission and reception. For this very reason, wireless transceivers are employed in almost every industrial domain for numerous applications. A special concept of distributed transceivers is proven to be extremely useful in the latest technologies like Internet of Things. As the name suggests, this is a collaborative communication technique where multiple transceivers are synchronized for faster and much more reliable communication. This imposes a major challenge while designing this kind of a transceiver, as all the transceivers should be operating with carrier synchronization to maintain the proper collaboration. While there are several ways to establish this sync, this thesis emphasizes one of those techniques and tries to resolve the issue in design. The carrier synchronization is achieved using time division synchronization technique. Several challenges in implementing this technique were addressed using various models simulated in MATLAB Simulink and Keysight ADS. An in detail analysis has been performed for all the techniques used for this implementation to provide a diverse perspective.
ContributorsBoorela, Venkata Srilekhya (Author) / Zeinolabedinzadeh, Saeed (Thesis advisor) / Trichopoulos, Georgios C. (Committee member) / Aberle, James (Committee member) / Arizona State University (Publisher)
Created2021
Description
Modern communication systems call for state-of-the-art links that offer almost idealistic performance. This requirement had pushed the technological world to pursue communication in frequency bands that were almost incomprehensible back when the first series of cordless cellphones were invented. These requirements have impacted everything from civilian requirements, space, medical diagnostics to defense technologies and have ushered in a new era of advancements. This work presents a new and novel approach towards improving the conventional phased array systems. The Intelligent Phase Shifter (IPS) offers phase tracking and discrimination solutions that currently plague High-Frequency wireless systems. The proposed system is implemented on (CMOS) process node to better scalability and reduce the overall power dissipated. A tracking system can discern Radio Frequency (RF) Signals’ phase characteristics using a double-balanced mixer. A locally generated reference signal is then matched to the phase of the incoming receiver using a fully modular yet continuous complete 360ᵒ phase shifter that alters the phase of the local reference and matches the phase with that of an incoming RF reference. The tracking is generally two control voltages that carry In-phase and Quadrature-phase information. These control signals offer the capability of controlling similar devices when placed in an array and eliminating any ambiguity that might occur due to in-band interference.
ContributorsLakshminarasimhaiah Rajendra, Yashas (Author) / Zeinolabedinzadeh, Saeed (Thesis advisor) / Trichopoulos, Georgios (Committee member) / Aberle, James (Committee member) / Arizona State University (Publisher)
Created2021
Description
I present a trade-study of methods for a 1-port vacuum cryogenic in-situ calibration of a vector network analyzer. The three main methods I investigated in this work were: calibration using a commercial off the shelf latching electro-mechanical six way switch, a custom switch board, and a flexible multi channel stripline based printed circuit board. The test procedure was developed for use in a ground based closed-cycle cryogenic test bench to measure the reflection coefficient of a single port connectorized device under test. The device was installed in the cryogenic system alongside calibration standards. The goal of the trade study was to find which method could be used to accomplish calibration and device measurement in a single thermal cycle. Four cycles were required for industry standard open-short-load device calibration. Room temperature measurements were done with all three calibration schemes but ultimately only the single pole six throw switch proved effective enough for further testing. The cryogenic testing was carried out on an arbitrary device at ∼ 3K temperature, over a 6 GHz bandwidth. The final objective was to develop a setup and procedure for measuring the frequency and temperature dependent complex impedance of superconducting devices such as hot electron bolometer mixers, which are used for down converting the signal in the IF chain of astronomy instruments. Characterization of superconducting devices while they are at their operating temperature is challenging using traditional calibration methods. This commercial alternative is less expensive and more efficient in terms of thermal cycles and set up because it can be installed in a wide variety of cyrogenic systems.
ContributorsNeric, Marko (Author) / Trichopoulos, Georgios (Thesis advisor) / Groppi, Chris (Committee member) / Aberle, James (Committee member) / Arizona State University (Publisher)
Created2023
Description
Dynamic metasurface antennas (DMAs) consist of waveguides patterned with numerous metamaterial radiators loaded with switchable components (such as varactors). Byapplying different direct current (DC) signals to each element, DMAs can generate a multitude of radiation patterns ranging from directive beams useful for wireless communication to spatially diverse ones useful for computational imaging and sensing. In this thesis,
DMAs are extended to conformal configurations. Using full-wave simulation, it is shown
that a conformal DMA can detect the angle of the incident signal over the horizon using a
two port device at a single frequency. The design and operation of the conformal DMA will
be detailed. In addition, it shows that DMAs can be implemented using a single substrate
layer, significantly simplifying its structure compared to conventional multiple-layer ones.
Using full-wave simulation, this thesis demonstrates a mechanism to bring DC signal to
metamaterial elements without requiring an extra layer. This design can be instrumental in
implementing the conformal DMA in the future
AoA detection was achieved over unique diode distributions of the conformal DCMA
at a 10-degree resolution. Investigations into additive noise of the simulated measured
data as well as the minimum amount of diode distributions to accurately detect AoA were
conducted and documented within this thesis. The single-layer DMA yielded both directive
and complex patterns that allow for many potential applications. With success in bringing
the DC signal to the metamaterial elements on a single-layer, further advances in conformal
DMAs can be achieved.
ContributorsWilliams, Travis Hugh (Author) / Imani, Seyedmohammadreza F (Thesis advisor) / Aberle, James (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2024