Matching Items (362)
Filtering by
- All Subjects: Mechanical Engineering
- Genre: Masters Thesis
Description
Concrete columns constitute the fundamental supports of buildings, bridges, and various other infrastructures, and their failure could lead to the collapse of the entire structure. As such, great effort goes into improving the fire resistance of such columns. In a time sensitive fire situation, a delay in the failure of critical load bearing structures can lead to an increase in time allowed for the evacuation of occupants, recovery of property, and access to the fire. Much work has been done in improving the structural performance of concrete including reducing column sizes and providing a safer structure. As a result, high-strength (HS) concrete has been developed to fulfill the needs of such improvements. HS concrete varies from normal-strength (NS) concrete in that it has a higher stiffness, lower permeability and larger durability. This, unfortunately, has resulted in poor performance under fire. The lower permeability allows for water vapor to build up causing HS concrete to suffer from explosive spalling under rapid heating. In addition, the coefficient of thermal expansion (CTE) of HS concrete is lower than that of NS concrete. In this study, the effects of introducing a region of crumb rubber concrete into a steel-reinforced concrete column were analyzed. The inclusion of crumb rubber concrete into a column will greatly increase the thermal resistivity of the overall column, leading to a reduction in core temperature as well as the rate at which the column is heated. Different cases were analyzed while varying the positioning of the crumb-rubber region to characterize the effect of position on the improvement of fire resistance. Computer simulated finite element analysis was used to calculate the temperature and strain distribution with time across the column's cross-sectional area with specific interest in the steel - concrete region. Of the several cases which were investigated, it was found that the improvement of time before failure ranged between 32 to 45 minutes.
ContributorsZiadeh, Bassam Mohammed (Author) / Phelan, Patrick (Thesis advisor) / Kaloush, Kamil (Thesis advisor) / Jiang, Hanqing (Committee member) / Arizona State University (Publisher)
Created2011
Description
This composition was commissioned by the Orgelpark to be performed in Amsterdam in September 2011 during Gaudeamus Muziekweek. It will be performed by the vocal group VocaalLab Nederland. It is scored for four vocalists, organ, tanpura, and electronic sound. The work is a culmination of my studies in South Indian Carnatic rhythm, North Indian classical singing, and American minimalism. It is a meditation on the idea that the drone and pulse are micro/macro aspects of the same phenomenon of vibration. Cycles are created on the macroscale through a mathematically defined scale of harmonic/pitch relationships. Cycles are created on the microscale through the subdivision and addition of rhythmic pulses.
ContributorsAdler, Jacob (Composer) / Rockmaker, Jody (Thesis advisor) / Feisst, Sabine (Committee member) / Etezady, Roshanne, 1973- (Committee member) / Arizona State University (Publisher)
Created2011
Description
Although one finds much scholarship on nineteenth-century music in America, one finds relatively little about music in the post-Civil-War frontier west. Generalities concerning small frontier towns of regional importance remain to be discovered. This paper aims to contribute to scholarship by chronicling musical life in the early years of two such towns in northern Arizona territory: Prescott and Flagstaff. Prescott, adjacent to Fort Whipple, was founded in 1864 to serve as capital of the new territory. Primarily home to soldiers and miners, the town was subject to many challenges of frontier life. Flagstaff, ninety miles to the north-northwest, was founded about two decades later in 1883 during the building of the Atlantic & Pacific Railroad, which connected the town to Albuquerque, New Mexico in the east and southern California in the west. Although the particular resources of each town provided many different musical opportunities, extant newspaper articles from Prescott's Arizona Miner and Flagstaff's Arizona Champion describe communities in which musical concerts, dances and theatrical performances provided entertainment and socializing for its citizens. Furthermore, music was an important part of developing institutions such as the church, schools, and fraternal lodges, and the newspapers of both towns advertised musical instruments and sheet music. Both towns were home to amateur musicians, and both offered the occasional opportunity to learn to dance or play an instrument. Although territorial Arizona was sometimes harsh and resources were limited, music was valued in these communities and was a consistent presence in frontier life.
ContributorsJohnson, Amber V (Author) / Oldani, Robert W. (Thesis advisor) / Holbrook, Amy (Committee member) / Saucier, Catherine (Committee member) / Arizona State University (Publisher)
Created2011
Description
Delirium is a piece for large wind ensemble that synthesizes compositional techniques to generate unique juxtapositions of contrasting musical elements. The piece is about 8:30 long and uses the full complement of winds, brass, and percussion. Although the composition begins tonally, chromatic alterations gradually shift the melodic content outside of the tonal center. In addition to changes in the melody, octatonic, chromatic, and synthetic scales and quartal and quintal harmonies are progressively introduced throughout the piece to add color and create dissonance. Delirium contains four primary sections that are all related by chromatic mediant. The subdivisions of the first part create abrupt transitions between contrasting material, evocative of the symptoms of delirium. As each sub-section progresses, the A minor tonality of the opening gradually gives way to increased chromaticism and dissonance. The next area transitions to C minor and begins to feature octatonic scales, secundal harmonies, and chromatic flourishes more prominently. The full sound of the ensemble then drops to solo instruments in the third section, now in G# minor, where the elements of the previous section are built upon with the addition of synthetic scales and quartal harmonies. The last division, before the recapitulation of the opening material, provides a drastic change in atmosphere as the chromatic elements from before are removed and the tense sound of the quartal harmonies are replaced with quintal sonorities and a more tonal melody. The tonality of this final section is used to return to the opening material. After an incomplete recapitulation, the descending motive that is used throughout the piece, which can be found in measure 61 in the flutes, is inverted and layered by minor 3rds. This inverted figure builds to the same sonority found in measure138, before ending on an F# chord, a minor third away from the A minor tonal center of the opening and where the piece seems like it should end.
ContributorsBell, Jeremy, 1986- (Composer) / Rogers, Rodney (Thesis advisor) / Oldani, Robert (Committee member) / Levy, Benjamin (Committee member) / Arizona State University (Publisher)
Created2011
Description
Microchannel heat sinks can possess heat transfer characteristics unavailable in conventional heat exchangers; such sinks offer compact solutions to otherwise intractable thermal management problems, notably in small-scale electronics cooling. Flow boiling in microchannels allows a very high heat transfer rate, but is bounded by the critical heat flux (CHF). This thesis presents a theoretical-numerical study of a method to improve the heat rejection capability of a microchannel heat sink via expansion of the channel cross-section along the flow direction. The thermodynamic quality of the refrigerant increases during flow boiling, decreasing the density of the bulk coolant as it flows. This may effect pressure fluctuations in the channels, leading to nonuniform heat transfer and local dryout in regions exceeding CHF. This undesirable phenomenon is counteracted by permitting the cross-section of the microchannel to increase along the direction of flow, allowing more volume for the vapor. Governing equations are derived from a control-volume analysis of a single heated rectangular microchannel; the cross-section is allowed to expand in width and height. The resulting differential equations are solved numerically for a variety of channel expansion profiles and numbers of channels. The refrigerant is R-134a and channel parameters are based on a physical test bed in a related experiment. Significant improvement in CHF is possible with moderate area expansion. Minimal additional manufacturing costs could yield major gains in the utility of microchannel heat sinks. An optimum expansion rate occurred in certain cases, and alterations in the channel width are, in general, more effective at improving CHF than alterations in the channel height. Modest expansion in height enables small width expansions to be very effective.
ContributorsMiner, Mark (Author) / Phelan, Patrick E (Thesis advisor) / Herrmann, Marcus (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2011
Description
In this thesis the performance of a Hybrid AC System (HACS) is modeled and optimized. The HACS utilizes solar photovoltaic (PV) panels to help reduce the demand from the utility during peak hours. The system also includes an ice Thermal Energy Storage (TES) tank to accumulate cooling energy during off-peak hours. The AC runs continuously on grid power during off-peak hours to generate cooling for the house and to store thermal energy in the TES. During peak hours, the AC runs on the power supplied from the PV, and cools the house along with the energy stored in the TES. A higher initial cost is expected due to the additional components of the HACS (PV and TES), but a lower operational cost due to higher energy efficiency, energy storage and renewable energy utilization. A house cooled by the HACS will require a smaller size AC unit (about 48% less in the rated capacity), compared to a conventional AC system. To compare the cost effectiveness of the HACS with a regular AC system, time-of-use (TOU) utility rates are considered, as well as the cost of the system components and the annual maintenance. The model shows that the HACS pays back its initial cost of $28k in about 6 years with an 8% APR, and saves about $45k in total cost when compared to a regular AC system that cools the same house for the same period of 6 years.
ContributorsJubran, Sadiq (Author) / Phelan, Patrick (Thesis advisor) / Calhoun, Ronald (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2011
Description
As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of water to cool off the condenser can be extremely large. Current wet cooling technologies such as cooling towers lose water from evaporation. One alternative to prevent this would be to implement a radiative cooling system. More specifically, a system that utilizes the volumetric radiation emission from water to the night sky could be implemented. This thesis analyzes the validity of a radiative cooling system that uses direct radiant emission to cool water. A brief study on potential infrared transparent cover materials such as polyethylene (PE) and polyvinyl carbonate (PVC) was performed. Also, two different experiments to determine the cooling power from radiation were developed and run. The results showed a minimum cooling power of 33.7 W/m2 for a vacuum insulated glass system and 37.57 W/m2 for a tray system with a maximum of 98.61 Wm-2 at a point when conduction and convection heat fluxes were considered to be zero. The results also showed that PE proved to be the best cover material. The minimum numerical results compared well with other studies performed in the field using similar techniques and materials. The results show that a radiative cooling system for a power plant could be feasible given that the cover material selection is narrowed down, an ample amount of land is available and an economic analysis is performed proving it to be cost competitive with conventional systems.
ContributorsOvermann, William (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Taylor, Robert (Committee member) / Arizona State University (Publisher)
Created2011
Description
In nearly all commercially successful internal combustion engine applications, the slider crank mechanism is used to convert the reciprocating motion of the piston into rotary motion. The hypocycloid mechanism, wherein the crankshaft is replaced with a novel gearing arrangement, is a viable alternative to the slider crank mechanism. The geared hypocycloid mechanism allows for linear motion of the connecting rod and provides a method for perfect balance with any number of cylinders including single cylinder applications. A variety of hypocycloid engine designs and research efforts have been undertaken and produced successful running prototypes. Wiseman Technologies, Inc provided one of these prototypes to this research effort. This two-cycle 30cc half crank hypocycloid engine has shown promise in several performance categories including balance and efficiency. To further investigate its potential a more thorough and scientific analysis was necessary and completed in this research effort. The major objective of the research effort was to critically evaluate and optimize the Wiseman prototype for maximum performance in balance, efficiency, and power output. A nearly identical slider crank engine was used extensively to establish baseline performance data and make comparisons. Specialized equipment and methods were designed and built to collect experimental data on both engines. Simulation and mathematical models validated by experimental data collection were used to better quantify performance improvements. Modifications to the Wiseman prototype engine improved balance by 20 to 50% (depending on direction) and increased peak power output by 24%.
ContributorsConner, Thomas (Author) / Redkar, Sangram (Thesis advisor) / Rogers, Bradley (Committee member) / Georgeou, Trian (Committee member) / Arizona State University (Publisher)
Created2011
Description
In the last few decades, the rapid development of electronic music technologies has changed the way society interacts with music, which in turn impacts the profession of music therapy. Except for a few cases, music therapy has not extensively explored the integration of new technology. However, current research trends show a willingness and excitement to explore the possibilities (Nagler, 2011; Ramsey, 2011; Magee, et al., 2011; Magee & Burland, 2008; Magee 2006). The project described in this paper intends to demonstrate one of these possibilities by combining modern technologies to create an interactive musical system with practical applications in music therapy. In addition to designing a practical tool, the project aims to question the role of technology in music therapy and to initiate dialogue between technologists and music therapists. The project, entitled MIST: A Musical Interactive Space for Therapy, uses modern gestural technology (the Microsoft® Kinect®) to capture body movements and turn them into music. It is intended for use in a clinical setting with children with mild to moderate disabilities. The system is a software/hardware package that is inexpensive, user-friendly, and portable. There are two functional modes of the system: the first sonifies specific movement tasks of reaching and balancing; the second is an interactive musical play space in which an entire room becomes responsive to presence and movement, creating a sonic playground. The therapeutic goals of the system are to motivate and train physical movement, encourage exploration of space and the body, and allow for musical expression, play, auditory perception, and social interaction.
ContributorsHeadlee, Kimberlee (Author) / Ingalls, Todd M (Thesis advisor) / Crowe, Barbara J. (Thesis advisor) / Stauffer, Sandra L (Committee member) / Arizona State University (Publisher)
Created2011
Description
The main objective of this project was to create a framework for holistic ideation and research about the technical issues involved in creating a holistic approach. Towards that goal, we explored different components of ideation (both logical and intuitive), characterized ideation states, and found new ideation blocks with strategies used to overcome them. One of the major contributions of this research is the method by which easy traversal between different ideation methods with different components were facilitated, to support both creativity and functional quality. Another important part of the framework is the sensing of ideation states (blocks/ unfettered ideation) and investigation of matching ideation strategies most likely to facilitate progress. Some of the ideation methods embedded in the initial holistic test bed are Physical effects catalog, working principles catalog, TRIZ, Bio-TRIZ and Artifacts catalog. Repositories were created for each of those. This framework will also be used as a research tool to collect large amount of data from designers about their choice of ideation strategies used, and their effectiveness. Effective documentation of design ideation paths is also facilitated using this holistic approach. A computer tool facilitating holistic ideation was developed. Case studies were run on different designers to document their ideation states and their choice of ideation strategies to come up with a good solution to solve the same design problem.
ContributorsMohan, Manikandan (Author) / Shah, Jami J. (Thesis advisor) / Huebner, Kenneth (Committee member) / Burleson, Winslow (Committee member) / Arizona State University (Publisher)
Created2011