Matching Items (1,505)
Filtering by
- All Subjects: Education
- All Subjects: Mechanical Engineering
Description
With the increasing focus on developing environmentally benign electronic packages, lead-free solder alloys have received a great deal of attention. Mishandling of packages, during manufacture, assembly, or by the user may cause failure of solder joint. A fundamental understanding of the behavior of lead-free solders under mechanical shock conditions is lacking. Reliable experimental and numerical analysis of lead-free solder joints in the intermediate strain rate regime need to be investigated. This dissertation mainly focuses on exploring the mechanical shock behavior of lead-free tin-rich solder alloys via multiscale modeling and numerical simulations. First, the macroscopic stress/strain behaviors of three bulk lead-free tin-rich solders were tested over a range of strain rates from 0.001/s to 30/s. Finite element analysis was conducted to determine appropriate specimen geometry that could reach a homogeneous stress/strain field and a relatively high strain rate. A novel self-consistent true stress correction method is developed to compensate the inaccuracy caused by the triaxial stress state at the post-necking stage. Then the material property of micron-scale intermetallic was examined by micro-compression test. The accuracy of this measure is systematically validated by finite element analysis, and empirical adjustments are provided. Moreover, the interfacial property of the solder/intermetallic interface is investigated, and a continuum traction-separation law of this interface is developed from an atomistic-based cohesive element method. The macroscopic stress/strain relation and microstructural properties are combined together to form a multiscale material behavior via a stochastic approach for both solder and intermetallic. As a result, solder is modeled by porous plasticity with random voids, and intermetallic is characterized as brittle material with random vulnerable region. Thereafter, the porous plasticity fracture of the solders and the brittle fracture of the intermetallics are coupled together in one finite element model. Finally, this study yields a multiscale model to understand and predict the mechanical shock behavior of lead-free tin-rich solder joints. Different fracture patterns are observed for various strain rates and/or intermetallic thicknesses. The predictions have a good agreement with the theory and experiments.
ContributorsFei, Huiyang (Author) / Jiang, Hanqing (Thesis advisor) / Chawla, Nikhilesh (Thesis advisor) / Tasooji, Amaneh (Committee member) / Mobasher, Barzin (Committee member) / Rajan, Subramaniam D. (Committee member) / Arizona State University (Publisher)
Created2011
Description
Microfluidics is the study of fluid flow at very small scales (micro -- one millionth of a meter) and is prevalent in many areas of science and engineering. Typical applications include lab-on-a-chip devices, microfluidic fuel cells, and DNA separation technologies. Many of these microfluidic devices rely on micron-resolution velocimetry measurements to improve microchannel design and characterize existing devices. Methods such as micro particle imaging velocimetry (microPIV) and micro particle tracking velocimetry (microPTV) are mature and established methods for characterization of steady 2D flow fields. Increasingly complex microdevices require techniques that measure unsteady and/or three dimensional velocity fields. This dissertation presents a method for three-dimensional velocimetry of unsteady microflows based on spinning disk confocal microscopy and depth scanning of a microvolume. High-speed 2D unsteady velocity fields are resolved by acquiring images of particle motion using a high-speed CMOS camera and confocal microscope. The confocal microscope spatially filters out of focus light using a rotating disk of pinholes placed in the imaging path, improving the ability of the system to resolve unsteady microPIV measurements by improving the image and correlation signal to noise ratio. For 3D3C measurements, a piezo-actuated objective positioner quickly scans the depth of the microvolume and collects 2D image slices, which are stacked into 3D images. Super resolution microPIV interrogates these 3D images using microPIV as a predictor field for tracking individual particles with microPTV. The 3D3C diagnostic is demonstrated by measuring a pressure driven flow in a three-dimensional expanding microchannel. The experimental velocimetry data acquired at 30 Hz with instantaneous spatial resolution of 4.5 by 4.5 by 4.5 microns agrees well with a computational model of the flow field. The technique allows for isosurface visualization of time resolved 3D3C particle motion and high spatial resolution velocity measurements without requiring a calibration step or reconstruction algorithms. Several applications are investigated, including 3D quantitative fluorescence imaging of isotachophoresis plugs advecting through a microchannel and the dynamics of reaction induced colloidal crystal deposition.
ContributorsKlein, Steven Adam (Author) / Posner, Jonathan D (Thesis advisor) / Adrian, Ronald (Committee member) / Chen, Kangping (Committee member) / Devasenathipathy, Shankar (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2011
Description
ABSTRACT There is a body of literature--albeit largely from the UK and Australia--that examines the ways in which class and gender influence life course, including educational attainment; however, much of this literature offers explanations and analyses for why individuals choose the life course they do. By assuming a cause-effect relationship between class and gender and life course, these studies perpetuate the idea that life can be predicted and controlled. Such an approach implies there is but one way of viewing--or an "official reading" of--the experience of class and gender. This silences other readings. This study goes beneath these "interpretations" and explores the phenomenon of identity and identity making in women who grew up working-class. Included is an investigation into how these women recognize and participate in their own identity making, identifying the interpretations they created and apply to their experience and the ways in which they juxtapose their educative experience. Using semi-structured interview I interviewed 21 women with working-class habitués. The strategy of inquiry that corresponded best to the goal of this project was heuristics, a variant of empathetic phenomenology. Heuristics distinguishes itself by including the life experience of the researcher while still showing how different people may participate in an event in their lives and how these individuals may give it radically different meanings. This has two effects: (1) the researcher recognizes that their own life experience affects their interpretations of these stories and (2) it elucidates the researcher's own life as it relates to identity formation and educational experience. Two, heuristics encourages different ways of presenting findings through a variety of art forms meant to enhance the immediacy and impact of an experience rather than offer any explanation of it. As a result of the research, four themes essential to locating the experience of women who grew up working class were discovered: making, paying attention, taking care, and up. These themes have pedagogic significance as women with working-class habitués navigate from this social space: the downstream effect of which is how and what these women take up as education.
ContributorsDecker, Shannon Irene (Author) / Blumenfeld-Jones, Donald (Thesis advisor) / Richards-Young, Gillian (Committee member) / Sandlin, Jennifer (Committee member) / Arizona State University (Publisher)
Created2011
Description
Proponents of current educational reform initiatives emphasize strict accountability, the standardization of curriculum and pedagogy and the use of standardized tests to measure student learning and indicate teacher, administrator and school performance. As a result, professional learning communities have emerged as a platform for teachers to collaborate with one another in order to improve their teaching practices, increase student achievement and promote continuous school improvement. The primary purpose of this inquiry was to investigate how teachers respond to working in professional learning communities in which the discourses privilege the practice of regularly comparing evidence of students' learning and results. A second purpose was to raise questions about how the current focus on standardization, assessment and accountability impacts teachers, their interactions and relationships with one another, their teaching practices, and school culture. Participants in this qualitative, ethnographic inquiry included fifteen teachers working within Green School District (a pseudonym). Initial interviews were conducted with all teachers, and responses were categorized in a typology borrowed from Barone (2008). Data analysis involved attending to the behaviors and experiences of these teachers, and the meanings these teachers associated with those behaviors and events. Teachers of GSD responded differently to the various layers of expectations and pressures inherent in the policies and practices in education today. The experiences of the teachers from GSD confirm the body of research that illuminates the challenges and complexity of working in collaborative forms of professional development, situated within the present era of accountability. Looking through lenses privileged by critical theorists, this study examined important intended and unintended consequences inherent in the educational practices of standardization and accountability. The inquiry revealed that a focus on certain "results" and the demand to achieve short terms gains may impede the creation of successful, collaborative, professional learning communities.
ContributorsBenson, Karen (Author) / Barone, Thomas (Thesis advisor) / Berliner, David (Committee member) / Enz, Billie (Committee member) / Arizona State University (Publisher)
Created2011
Description
Being properly prepared is one of the keys to surviving an emergency or a disaster. In order to be prepared, people need appropriate education in preparedness, which includes elements of prevention, and planning. There is a definite need to better prepare our nation's citizens in order for them to safely respond in times of a disaster. It also seems likely that the earlier concepts and skills are learned, the easier those concepts and skills would be to remember and the more proficient one would become in implementing them. Therefore, it seems appropriate to teach emergency preparedness concepts and skills early on in the educational process. This means that significant efforts need to be directed toward learning, what impediments currently exist, what is helpful, and how preparedness concepts and skills can be taught to our children. A survey was distributed to third, fourth, and fifth grade teachers, asking them questions about emergency preparedness lessons in the classroom. Results indicated that the majority of teachers would be willing to teach emergency preparedness if the curriculum met current academic standards and they were given adequate resources to teach this subject. This study provides ideas, concepts and motivation for teachers to use in a cross-curricular approach to teaching emergency preparedness in the classroom. This is accomplished by presenting examples of newly developed curriculum/lesson plans that meet state academic standards, based on the current Community Emergency Response Team program and on children's fiction literature for the appropriate age group. A list of literature that could be used in this development is also provided in this study.
ContributorsChristensen, Christian B (Author) / Edwards, David (Thesis advisor) / Olson, Larry (Committee member) / Peterson, Danny (Committee member) / Arizona State University (Publisher)
Created2011
Description
Concrete columns constitute the fundamental supports of buildings, bridges, and various other infrastructures, and their failure could lead to the collapse of the entire structure. As such, great effort goes into improving the fire resistance of such columns. In a time sensitive fire situation, a delay in the failure of critical load bearing structures can lead to an increase in time allowed for the evacuation of occupants, recovery of property, and access to the fire. Much work has been done in improving the structural performance of concrete including reducing column sizes and providing a safer structure. As a result, high-strength (HS) concrete has been developed to fulfill the needs of such improvements. HS concrete varies from normal-strength (NS) concrete in that it has a higher stiffness, lower permeability and larger durability. This, unfortunately, has resulted in poor performance under fire. The lower permeability allows for water vapor to build up causing HS concrete to suffer from explosive spalling under rapid heating. In addition, the coefficient of thermal expansion (CTE) of HS concrete is lower than that of NS concrete. In this study, the effects of introducing a region of crumb rubber concrete into a steel-reinforced concrete column were analyzed. The inclusion of crumb rubber concrete into a column will greatly increase the thermal resistivity of the overall column, leading to a reduction in core temperature as well as the rate at which the column is heated. Different cases were analyzed while varying the positioning of the crumb-rubber region to characterize the effect of position on the improvement of fire resistance. Computer simulated finite element analysis was used to calculate the temperature and strain distribution with time across the column's cross-sectional area with specific interest in the steel - concrete region. Of the several cases which were investigated, it was found that the improvement of time before failure ranged between 32 to 45 minutes.
ContributorsZiadeh, Bassam Mohammed (Author) / Phelan, Patrick (Thesis advisor) / Kaloush, Kamil (Thesis advisor) / Jiang, Hanqing (Committee member) / Arizona State University (Publisher)
Created2011
Description
A relatively simple subset of nanotechnology - nanofluids - can be obtained by adding nanoparticles to conventional base fluids. The promise of these fluids stems from the fact that relatively low particle loadings (typically <1% volume fractions) can significantly change the properties of the base fluid. This research explores how low volume fraction nanofluids, composed of common base-fluids, interact with light energy. Comparative experimentation and modeling reveals that absorbing light volumetrically (i.e. in the depth of the fluid) is fundamentally different from surface-based absorption. Depending on the particle material, size, shape, and volume fraction, a fluid can be changed from being mostly transparent to sunlight (in the case of water, alcohols, oils, and glycols) to being a very efficient volumetric absorber of sunlight. This research also visualizes, under high levels of irradiation, how nanofluids undergo interesting, localized phase change phenomena. For this, images were taken of bubble formation and boiling in aqueous nanofluids heated by a hot wire and by a laser. Infrared thermography was also used to quantify this phenomenon. Overall, though, this research reveals the possibility for novel solar collectors in which the working fluid directly absorbs light energy and undergoes phase change in a single step. Modeling results indicate that these improvements can increase a solar thermal receiver's efficiency by up to 10%.
ContributorsTaylor, Robert (Author) / Phelan, Patrick E (Thesis advisor) / Adrian, Ronald (Committee member) / Trimble, Steve (Committee member) / Posner, Jonathan (Committee member) / Maracas, George (Committee member) / Arizona State University (Publisher)
Created2011
Description
Locomotion of microorganisms is commonly observed in nature. Although microorganism locomotion is commonly attributed to mechanical deformation of solid appendages, in 1956 Nobel Laureate Peter Mitchell proposed that an asymmetric ion flux on a bacterium's surface could generate electric fields that drive locomotion via self-electrophoresis. Recent advances in nanofabrication have enabled the engineering of synthetic analogues, bimetallic colloidal particles, that swim due to asymmetric ion flux originally proposed by Mitchell. Bimetallic colloidal particles swim through aqueous solutions by converting chemical fuel to fluid motion through asymmetric electrochemical reactions. This dissertation presents novel bimetallic motor fabrication strategies, motor functionality, and a study of the motor collective behavior in chemical concentration gradients. Brownian dynamics simulations and experiments show that the motors exhibit chemokinesis, a motile response to chemical gradients that results in net migration and concentration of particles. Chemokinesis is typically observed in living organisms and distinct from chemotaxis in that there is no particle directional sensing. The synthetic motor chemokinesis observed in this work is due to variation in the motor's velocity and effective diffusivity as a function of the fuel and salt concentration. Static concentration fields are generated in microfluidic devices fabricated with porous walls. The development of nanoscale particles that swim autonomously and collectively in chemical concentration gradients can be leveraged for a wide range of applications such as directed drug delivery, self-healing materials, and environmental remediation.
ContributorsWheat, Philip Matthew (Author) / Posner, Jonathan D (Thesis advisor) / Phelan, Patrick (Committee member) / Chen, Kangping (Committee member) / Buttry, Daniel (Committee member) / Calhoun, Ronald (Committee member) / Arizona State University (Publisher)
Created2011
Description
Federal education policies call for school district leaders to promote classroom technology integration to prepare students with 21st century skills. However, schools are struggling to integrate technology effectively, with students often reporting that they feel like they need to power down and step back in time technologically when they enter classrooms. The lack of meaningful technology use in classrooms indicates a need for increased teacher preparation. The purpose of this study was to investigate the impact a coaching model of professional development had on school administrators` abilities to increase middle school teachers` technology integration in their classrooms. This study attempted to coach administrators to develop and articulate a vision, cultivate a culture, and model instruction relative to the meaningful use of instructional technology. The study occurred in a middle school. Data for this case study were collected via administrator interviews, the Principal`s Computer Technology Survey, structured observations using the Higher Order Thinking, Engaged Learning, Authentic Learning, Technology Use protocol, field notes, the Technology Integration Matrix, teacher interviews, and a research log. Findings concluded that cultivating change in an organization is a complex process that requires commitment over an extended period of time. The meaningful use of instructional technology remained minimal at the school during fall 2010. My actions as a change agent informed the school`s administrators about the role meaningful use of technology can play in instruction. Limited professional development, administrative vision, and expectations minimized the teachers` meaningful use of instructional technology; competing priorities and limited time minimized the administrators` efforts to improve the meaningful use of instructional technology. Realizing that technology proficient teachers contribute to student success with technology, it may be wise for administrators to incorporate technology-enriched professional development and exercise their leadership abilities to promote meaningful technology use in classrooms.
ContributorsRobertson, Kristen (Author) / Moore, David (Thesis advisor) / Cheatham, Greg (Committee member) / Catalano, Ruth (Committee member) / Arizona State University (Publisher)
Created2011
Description
The purpose of this study was to investigate the use of the design characteristics component of the Jeffries/National League for Nursing Framework for Designing, Implementing, and Evaluating Simulations when developing a simulation-based approach to teaching structured communication to new graduate nurses. The setting for the study was a medium sized tertiary care hospital located in the southwestern United States. Participants in the study were an instructional designer (who also served as the researcher), two graduate nursing education specialists, one unit based educator, and 27 new graduate nurses and registered nurses who had been in practice for less than six months. Design and development research was employed to examine the processes used to design the simulation, implementation of the simulation by faculty, and course evaluation data from both students and faculty. Data collected from the designer, faculty and student participants were analyzed for evidence on how the design characteristics informed the design and implementation of the course, student achievement of course goals, as well as student and faculty evaluation of the course. These data were used to identify the strengths and weaknesses of the model in this context as well as suggestions for strengthening the model. Findings revealed that the model generally functioned well in this context. Particular strengths of the model were its emphasis on problem-solving and recommendations for attending to fidelity of clinical scenarios. Weaknesses of the model were inadequate guidance for designing student preparation, student support, and debriefing. Additionally, the model does not address the role of observers or others who are not assigned the role of primary nurse during simulations. Recommendations for strengthening the model include addressing these weaknesses by incorporating existing evidence in the instructional design of experiential learning and by scaffolding students during problem-solving. The results of the study also suggested interrelationships among the design characteristics that were not previously described; further exploration of this finding may strengthen the model. Faculty and instructional designers creating clinical simulations in this context would benefit from using the Jeffries/National League for Nursing Model, adding external resources to supplement in areas where the model does not currently provide adequate guidance.
ContributorsWilson, Rebecca D (Author) / Klein, James D. (Thesis advisor) / Hagler, Debra (Committee member) / Savenye, Wilhelmina (Committee member) / Arizona State University (Publisher)
Created2011