Matching Items (139)
Description
The intent of this research is to determine if cool roofs lead to increased energy use in the U.S. and if so, in what climates. Directed by the LEED environmental building rating system, cool roofs are increasingly specified in an attempt to mitigate urban heat island effect. A typical single story retail building was simulated using eQUEST energy software across seven different climatic zones in the U.S.. Two roof types are varied, one with a low solar reflectance index of 30 (typical bituminous roof), and a roof with SRI of 90 (high performing membrane roof). The model also varied the perimeter / core fraction, internal loads, and schedule of operations. The data suggests a certain point at which a high SRI roofing finish results in energy penalties over the course of the year in climate zones which are heating driven. Climate zones 5 and above appear to be the flipping point, beyond which the application of a high SRI roof creates sufficient heating penalties to outweigh the cooling energy benefits.
ContributorsLee, John (Author) / Bryan, Harvey (Thesis advisor) / Marlin, Marlin (Committee member) / Ramalingam, Muthukumar (Committee member) / Arizona State University (Publisher)
Created2011
Description
This dissertation examines the conditions that foster or hinder success of university-based community design centers (CDCs) in the United States. Little is known about the normative underpinnings of CDCs, how successful these centers have been, which factors have contributed to or impeded their success, and how they have responded to the changes in social, political, professional and economic contexts. Adopting Giddens' theory of structuration as a research framework, this study examined CDCs via a mixed-methods sequential research design: a cross-sectional survey of CDCs on current definitions of success and metrics in use; and in-depth interviews to document the centers' histories of change or stasis, and how these changes influenced their successes. The findings of the first phase were utilized to develop a comprehensive success model for current CDCs that comprise measures related to organizational impacts, activities, and capacities. In the multiple case study analysis, four major rationales were identified: universities for public service, pragmatist learning theories, civic professionalism, and social change. These four rationales were evident in all of the studied cases at varying degrees. Using the concept of permeability, the study also exemplified how the processes of CDCs had transformative impacts in institutional, societal, and personal contexts. Multidisciplinarity has also emerged as a theme for the current organizational transformations of CDCs. The main argument that emerged from these findings is that it is not possible to identify a singular model or best practice for CDCs. The strengths and unique potentials of CDCs depend on the alternative rationales, involved agencies, and their social, political and spatial contexts. However, capitalizing on the distinctive attributes of the institutional context (i.e. the university), I consider some possibilities for university-based CDCs with an interdisciplinary structure, pushing the professional, curricular, and institutional boundaries, and striving for systemic change and social justice. In addition to contributing to the theoretical knowledge base, the findings provide useful information to various CDCs across the country, particularly today as they struggle with financial constraints while the community needs they provide are increasingly in demand. Since CDCs have a long history of community service and engagement, the findings can inform other university-community partnerships.
ContributorsTural, Elif (Author) / Ahrentzen, Sherry (Thesis advisor) / Meunier, John (Committee member) / Yabes, Ruth (Committee member) / Arizona State University (Publisher)
Created2011
Description
Interior design continues to re-define itself as a discipline that presents designers with new problems that require innovative solutions. This is particularly true in the case in office design. The transformation of the office environment from the standard bullpen configuration to today's dynamic, flexible, and open floor plans has required new design methodologies that incorporate tools and technologies that are readily available to interior designers. Today, increased use of teams in the workplace challenges interior designers to create environments that accommodate both group and individual tasks (Brill, Weidermann & BOSTI associates, 2001). Collaboration has received considerable attention as organizations focus on productivity and reducing costs to compete in a global economy (Hassanain, 2006). Designers and architects should learn to create environments that respond to dynamic, moveable, and flexible work methods. This web-based research study explores the use of pattern language as a new tool for designing collaborative work environments. In 1977, Christopher Alexander and his associates developed `Pattern language' (Alexander, Ishikawa & Silverstein, 1977) as a design formulation methodology. It consists of a series of interrelated physical elements combined to create a framework for design solutions. This pattern language tool for collaborative work environments was created based on research by Lori Anthony (2001). This study further builds upon current trends and research in collaborative work environments. The researcher conducted a pilot test by sending the web-based tool and an online questionnaire to all graduate students and faculty members in the fields of interior design and healthcare and healing environment (HHE). After testing its validity in The Design School at Arizona State University, the same tool and questionnaire was sent to the employees of one of the leading architecture and interior design firms in Phoenix, AZ. The results showed that among those design professionals surveyed, the majority believe pattern language could be a valuable design tool. The insights obtained from this study will provide designers, architects, and facility managers with a new design tool to aid in creating effective collaborative spaces in a work environment.
ContributorsSangoi, Deepika (Author) / Bender, Diane (Thesis advisor) / Brandt, Beverly (Committee member) / Heywood, William (Committee member) / Arizona State University (Publisher)
Created2011
Description
There is a conflict in the profession of interior design over regulation through legislation. For some organizations and individuals, regulation via legislation is the next perceived step in the professionalization process which has been evolving for over 40 years and is needed to protect the health, safety and welfare (HSW) of the public. For other organizations and individuals, legislation is deemed unnecessary and an affront to the free trade market and serves only to create anti-competitive barriers resulting in the formation of a "design cartel" (Campo-Flores, 2011; Carpenter, 2007). Research exists on the professionalization of interior design and on the reasons stated for and against legislation (ASID, 2010, Anderson, Honey, Dudek, 2007, Martin, 2008). However, there is little research on understanding how the actual stake-holders view legislation. For the purpose of this research, the stake-holders are the professional interior designers themselves. The purpose of this study was to examine the current status of relevant issues to the subject of regulation in interior design and to pose the question if there is an option to legislation. If so, could third party certification be an acceptable alternative? An on-line survey was developed and posted on interior design networking sites on LinkedIn. The results of the survey suggest that interior designers are completely divided on the issue of legislation but favorably view certification. The survey has also revealed the lack of understanding of the legislative process in interior design and confusion in the role that interior design organizations play. The study has also revealed that interior designers identify the distorted view the public has of this industry as a problem. Interior designers surveyed in this study see a need to separate commercial and residential interior design. Overall, this study has concluded that interior designers would actually prefer a certification process to legislation.
ContributorsPliess, Catherine (Author) / Bender, Diane (Thesis advisor) / Crewe, Katherine (Committee member) / Kroelinger, Michael D. (Committee member) / Arizona State University (Publisher)
Created2011
Description
The green building movement has been an effective catalyst in reducing energy demands of buildings and a large number of `green' certified buildings have been in operation for several years. Whether these buildings are actually performing as intended, and if not, identifying specific causes for this discrepancy falls into the general realm of post-occupancy evaluation (POE). POE involves evaluating building performance in terms of energy-use, indoor environmental quality, acoustics and water-use; the first aspect i.e. energy-use is addressed in this thesis. Normally, a full year or more of energy-use and weather data is required to determine the actual post-occupancy energy-use of buildings. In many cases, either measured building performance data is not available or the time and cost implications may not make it feasible to invest in monitoring the building for a whole year. Knowledge about the minimum amount of measured data needed to accurately capture the behavior of the building over the entire year can be immensely beneficial. This research identifies simple modeling techniques to determine best time of the year to begin in-situ monitoring of building energy-use, and the least amount of data required for generating acceptable long-term predictions. Four analysis procedures are studied. The short-term monitoring for long-term prediction (SMLP) approach and dry-bulb temperature analysis (DBTA) approach allow determining the best time and duration of the year for in-situ monitoring to be performed based only on the ambient temperature data of the location. Multivariate change-point (MCP) modeling uses simulated/monitored data to determine best monitoring period of the year. This is also used to validate the SMLP and DBTA approaches. The hybrid inverse modeling method-1 predicts energy-use by combining a short dataset of monitored internal loads with a year of utility-bills, and hybrid inverse method-2 predicts long term building performance using utility-bills only. The results obtained show that often less than three to four months of monitored data is adequate for estimating the annual building energy use, provided that the monitoring is initiated at the right time, and the seasonal as well as daily variations are adequately captured by the short dataset. The predictive accuracy of the short data-sets is found to be strongly influenced by the closeness of the dataset's mean temperature to the annual average temperature. The analysis methods studied would be very useful for energy professionals involved in POE.
ContributorsSingh, Vipul (Author) / Reddy, T. Agami (Thesis advisor) / Bryan, Harvey (Committee member) / Addison, Marlin (Committee member) / Arizona State University (Publisher)
Created2011
Description
Mid-Century ranch house architecture and design is significant to the architectural landscape of the Phoenix Metropolitan Area. The increasing age of the city's post-WWII properties is creating a need for renovation and rehabilitation, and new technologies have created modern conveniences for today's homeowners, changing interior space plan requirements. These homeowners will need guidance to alter these properties correctly and to preserve the home's essential features. This thesis analyzes the design trends and materials used during the mid-twentieth century, and demonstrates methods for applying them to a current renovation project. The research outlined in this document proves that it is possible to maintain historic integrity, include "Green" design strategies, and apply contemporary technology to a modern ranch renovation.
ContributorsSimmons, Rachel (Author) / Brandt, Beverly (Thesis advisor) / Warren-Findley, Janelle (Committee member) / Boradkar, Prasad (Committee member) / Arizona State University (Publisher)
Created2009
Description
This study examines the applicability of high dynamic range (HDR) imagery as a diagnostic tool for studying lighting quality in interior environments. It originates from the limitations in lighting quality assessments, particularly from the problematic nature of measuring luminance contrast--a significant lighting quality definer. In this research, HDR imaging method is studied systematically and in detail via extensive camera calibration tests considering the effect of lens and light source geometry (i.e. vignetting, point spread and modulation transfer functions), in-camera variables (i.e. spectral response, sensor sensitivity, metering mode,), and environmental variables (i.e. ambient light level, surface color and reflectance, light source spectral power distribution) on the accuracy of HDR-image-derived luminance data. The calibration test findings are used to create camera setup and calibration guidelines for future research, especially to help minimize errors in image extracted lighting data. The findings are also utilized to demonstrate the viability of the tool in a real world setting--an office environment combining vertical and horizontal tasks. Via the quasi-experimental setup, the relationship between line of sight and perceived luminance contrast ratios are studied using HDR images. Future research can benefit from the calibration guidelines to minimize HDR-based luminance estimation errors. The proposed tool can be used and tested in different contexts and tasks with varying user groups for revising the former luminance-contrast guidelines as well as surface reflectance recommendations.
ContributorsTural, Mehmedalp (Author) / Bryan, Harvey (Thesis advisor) / Kroelinger, Michael D. (Committee member) / Ozel, Filiz (Committee member) / Arizona State University (Publisher)
Created2011
Description
This study is an initial step in exploring how urban design typologies can help inform community asset research to broaden the definition of physical assets. Asset based community development research identifies specific types of physical assets such as streets, structures, housing or vacant lots. This research argues that a comprehensive look at physical assets is needed, taking into consideration urban typologies such as paths, landmarks, views and districts as well as the spatial relationships that influence their significance. Community asset literature and conditions specific to the Sunnyslope community in Phoenix, Arizona suggest that differences in ethnicity such as spatial segregation, and socio-economic status exist. However, the literature does not address how these differences in ethnicity might influence residents' perceptions of physical assets. This study explores the questions - How do perceptions of physical assets vary among women of different ethnicities? What, if any, are the reasons behind these ethnic differences in perception? The research applied a survey instrument with open-ended and close-ended questions, and a map to mark frequently used routes. Assets identified by recoding open-ended responses were statistically analyzed for frequencies. The most frequently mentioned assets were analyzed by GIS for spatial relationships. Women of White and Latino ethnicities frequently chose individual buildings and locations as physical assets over paths, views, districts and landmarks. White women identified urban typologies as physical assets. In contrast, Latino women identified no significant urban typologies as assets. The inclusion of urban typologies confirmed and expanded upon physical assets previously identified by other asset-based studies on the community of Sunnyslope. Notable differences in ethnicity were found in the perception of physical assets of economic significance, assets for use and assets of visual appeal. Besides ethnicity, age and proximity to assets also influenced asset perception of White and Latino women. Community organizations need to take into consideration the ethnic differences in perception of physical assets, in the context of culture, spatial segregation and differing family structures. The inclusion of urban typologies helped highlight the differences in ethnicities for physical assets of visual appeal, and the use of leisure and recreation facilities.
ContributorsThatte, Aparna (Author) / Ozel, Filiz (Thesis advisor) / Ahrentzen, Sherry (Thesis advisor) / Guhathakurta, Subhrajit (Committee member) / Arizona State University (Publisher)
Created2011
Description
Defines the concept of the arcology as conceived by architect Paolo Soleri. Arcology combines "architecture" and "ecology" and explores a visionary notion of a self-contained urban community that has agricultural, commercial, and residential facilities under one roof. Two real-world examples of these projects are explored: Arcosanti, AZ and Masdar City, Abu Dhabi, UAE. Key aspects of the arcology that could be applied to an existing urban fabric are identified, such as urban design fostering social interaction, reduction of automobile dependency, and a development pattern that combats sprawl. Through interviews with local representatives, a holistic approach to applying arcology concepts to the Phoenix Metro Area is devised.
ContributorsSpencer, Sarah Anne (Author) / Manuel-Navarrete, David (Thesis director) / Salon, Deborah (Committee member) / Barrett, The Honors College (Contributor) / School of Geographical Sciences and Urban Planning (Contributor) / School of Sustainability (Contributor)
Created2015-05
Description
For most of our history humans have been closely tied to energy provided by the sun. Phases of light and dark initiate major biological functions within each day and regulate patterns of sleep and heightened alertness. Daylight was historically synonymous with sophisticated architecture, providing a mysterious play of light and illuminating productive tasks. It is only within the last 150 years that humans have sought to improve upon daylight, largely replacing it with artificially fueled systems. A new scientific approach to providing interior light has focused on the visible spectrum, negating the remainder of energy from our lives. This thesis considers the full spectrum of natural daylight, and its potential for improving human health, and well being. The literature review explores a brief history of solar architecture leading into the 21st century. A case study of the award winning Arabian Library in Scottsdale Arizona reveals four methods of passive daylight integration. A phenomenological ethnographic methodology assessed the impact of these four strategies on interior lighting quality, documented from the designer's perspective. As the science of photobiology continues to advance, it has become clearly evident that natural daylight provides more than mere illumination, and should be considered an essential element of the interior built environment.
ContributorsMarotta, Nickolas A (Author) / Bernardi, Jose (Thesis advisor) / Rowen, Marthe (Committee member) / Bauer, Kelly (Committee member) / Arizona State University (Publisher)
Created2013