Matching Items (3)
Description
Technological advances in low power wearable electronics and energy optimization techniques
make motion energy harvesting a viable energy source. However, it has not been
widely adopted due to bulky energy harvester designs that are uncomfortable to wear. This
work addresses this problem by analyzing the feasibility of powering low wearable power
devices using piezoelectric energy generated at the human knee. We start with a novel
mathematical model for estimating the power generated from human knee joint movements.
This thesis’s major contribution is to analyze the feasibility of human motion energy harvesting
and validating this analytical model using a commercially available piezoelectric
module. To this end, we implemented an experimental setup that replicates a human knee.
Then, we performed experiments at different excitation frequencies and amplitudes with
two commercially available Macro Fiber Composite (MFC) modules. These experimental
results are used to validate the analytical model and predict the energy harvested as a function
of the number of steps taken in a day. The model estimates that 13μWcan be generated
on an average while walking with a 4.8% modeling error. The obtained results show that
piezoelectricity is indeed a viable approach for powering low-power wearable devices.
make motion energy harvesting a viable energy source. However, it has not been
widely adopted due to bulky energy harvester designs that are uncomfortable to wear. This
work addresses this problem by analyzing the feasibility of powering low wearable power
devices using piezoelectric energy generated at the human knee. We start with a novel
mathematical model for estimating the power generated from human knee joint movements.
This thesis’s major contribution is to analyze the feasibility of human motion energy harvesting
and validating this analytical model using a commercially available piezoelectric
module. To this end, we implemented an experimental setup that replicates a human knee.
Then, we performed experiments at different excitation frequencies and amplitudes with
two commercially available Macro Fiber Composite (MFC) modules. These experimental
results are used to validate the analytical model and predict the energy harvested as a function
of the number of steps taken in a day. The model estimates that 13μWcan be generated
on an average while walking with a 4.8% modeling error. The obtained results show that
piezoelectricity is indeed a viable approach for powering low-power wearable devices.
ContributorsBandyopadhyay, Shiva (Author) / Ogras, Umit Y. (Thesis advisor) / Fan, Deliang (Committee member) / Trichopoulos, Georgios (Committee member) / Arizona State University (Publisher)
Created2020
Description
Global industrialization and urbanization have led to increased levels of air pollution. The costs to society have come in the form of environmental damage, healthcare expenses, lost productivity, and premature mortality. Measuring pollutants is an important task for identifying its sources, warning individuals about dangerous exposure levels, and providing epidemiologists with data to link pollutants with diseases. Current methods for monitoring air pollution are inadequate though. They rely on expensive, complex instrumentation at limited fixed monitoring sites that do not capture the true spatial and temporal variation. Furthermore, the fixed outdoor monitoring sites cannot warn individuals about indoor air quality or exposure to chemicals at worksites. Recent advances in manufacturing and computing technology have allowed new classes of low-cost miniature gas sensor to emerge as possible alternatives. For these to be successful however, there must be innovations in the sensors themselves that improve reliability, operation, and their stability and selectivity in real environments. Three novel gas sensor solutions are presented. The first is the development of a wearable personal exposure monitor using all commercially available components, including two metal oxide semiconductor gas sensors. The device monitors known asthma triggers: ozone, total volatile organic compounds, temperature, humidity, and activity level. Primary focus is placed on the ozone sensor, which requires special circuits, heating algorithm, and calibration to remove temperature and humidity interferences. Eight devices are tested in multiple field tests. The second is the creation of a new compact optoelectronic gas sensing platform using colorimetric microdroplets printed on the surface of a complementary-metal-oxide-semiconductor (CMOS) imager. The nonvolatile liquid microdroplets provide a homogeneous, uniform environment that is ideal for colorimetric reactions and lensless optical measurements. To demonstrate one type of possible indicating system gaseous ammonia is detected by complexation with Cu(II). The third project continues work on the CMOS imager optoelectronic platform and develops a more robust sensing system utilizing hydrophobic aerogel particles. Ammonia is detected colorimetrically by its reaction with a molecular dye, with additives and surface treatments enhancing uniformity of the printed films. Future work presented at the end describes a new biological particle sensing system using the CMOS imager.
ContributorsMallires, Kyle Reed (Author) / Tao, Nongjian (Thesis advisor) / Forzani, Erica (Thesis advisor) / Wiktor, Peter (Committee member) / Wang, Di (Committee member) / Alford, Terry (Committee member) / Xian, Xiaojun (Committee member) / Arizona State University (Publisher)
Created2020
Description
Touch plays a vital role in maintaining human relationships through social andemotional communications. This research proposes a multi-modal haptic display
capable of generating vibrotactile and thermal haptic signals individually and simultaneously.
The main objective for creating this device is to explore the importance
of touch in social communication, which is absent in traditional communication
modes like a phone call or a video call. By studying how humans interpret
haptically generated messages, this research aims to create a new communication
channel for humans. This novel device will be worn on the user's forearm and has
a broad scope of applications such as navigation, social interactions, notifications,
health care, and education. The research methods include testing patterns in the
vibro-thermal modality while noting its realizability and accuracy. Different patterns
can be controlled and generated through an Android application connected to
the proposed device via Bluetooth. Experimental results indicate that the patterns
SINGLE TAP and HOLD/SQUEEZE were easily identifiable and more relatable to
social interactions. In contrast, other patterns like UP-DOWN, DOWN-UP, LEFTRIGHT,
LEFT-RIGHT, LEFT-DIAGONAL, and RIGHT-DIAGONAL were less
identifiable and less relatable to social interactions. Finally, design modifications
are required if complex social patterns are needed to be displayed on the forearm.
ContributorsGharat, Shubham Shriniwas (Author) / McDaniel, Troy (Thesis advisor) / Redkar, Sangram (Thesis advisor) / Zhang, Wenlong (Committee member) / Arizona State University (Publisher)
Created2021