Matching Items (5)
Description
This report discusses the trade-offs of electric vehicles at both the macro-level and the consumer-level. The idea of this project is to address the factors that will affect many people, which are the macro-level trade-offs. Consumer-level trade-offs will address the concerns that individual consumers have when buying a car. The macro-level trade-offs that are discussed include batteries versus engines, increased weight, and strain on the power grid. Consumer-level trade-offs include price, maintenance, cost of ownership, and safety. Electric cars are the future, and although the report points out a lot of potential issues, it is not meant to detract from the adoption of electric vehicles. There are so many possibilities regarding the future of the car industry and there is a lot to look forward to despite the current and future issues that will be encountered.
ContributorsNewcomb, Matthew (Author) / Carter, Craig (Thesis director) / Arrfelt, Mathias (Committee member) / Barrett, The Honors College (Contributor) / Department of Finance (Contributor)
Created2022-12
Description
The experiment performed used bone samples across three modern skeletal collections. These samples were collected from one’s skeletal ranging from superior to inferior regions of their body. These collected skeletal bones were then chemically cleaned, mechanically ground, and then digested to run in an ICP-MS. The concentrations returned from the instrument were then reduced using known standard concentrations and organized to allow for statistical measurements. Findings for this experiment include the insignificance of metal concentrations between groups of individuals who have had joint replacements and those who have not for Cobalt, Chromium, Titanium, and Iron. Concentrations for Titanium were below the limit of detection, therefore, the measured concentrations were approximated to zero. On the other hand, significant findings from the experiment include that there are high concentrations for, Iron and Zinc in general, among all groups of donors. These high concentrations could be due to the high levels of these metals in food, but the large concentration is concerning. There are also high concentrations for Gadolinium, but this is present in the individuals who have had joint replacements as they were likely given Gadolinium for medical purposes such as an MRI. The results found were determined to be valid considering the calculations were compared with a study of similar methodology, and across the studies, the measurements were of similar magnitudes.
ContributorsSadsad, Janelle (Author) / Gordon, Gwyneth (Thesis director) / McGregor, Sarah (Committee member) / Barrett, The Honors College (Contributor) / School of Molecular Sciences (Contributor) / School of Mathematical and Statistical Sciences (Contributor)
Created2022-05
Description
ABSTRACT
Transition metals have been extensively employed to address various challenges
related to catalytic organic transformations, small molecule activation, and energy storage
over the last few decades. Inspired by recent catalytic advances mediated by redox noninnocent
pyridine diimine (PDI) and α-diimine (DI) ligand supported transition metals,
our group has designed new PDI and DI ligands by modifying the imine substituents to
feature donor atoms. My doctoral research is focused on the development of PDI and DI
ligand supported low valent first row metal complexes (Mn, Fe, Co) and their application
in bond activation reactions and the hydrofunctionalization of unsaturated bonds.
First two chapters of this dissertation are centered on the synthesis and
application of redox non-innocent ligand supported low valent iron complexes. Notably,
reduction of a DI-based iron dibromide led to the formation of a low valent iron
dinitrogen compound. This compound was found to undergo a sequential C-H and C-P
bond activation processes upon heating to form a dimeric compound. The plausible
mechanism for dimer formation is also described here.
Inspired by the excellent carbonyl hydrosilylation activity of our previously
reported Mn catalyst, (Ph2PPrPDI)Mn, attempts were made to synthesize second generation
Mn catalyst, which is described in the third chapter. Reduction of (PyEtPDI)MnCl2
furnished a deprotonated backbone methyl group containing Mn compound
[(PyEtPDEA)Mn] whereas reduction of (Ph2PEtPDI)MnCl2 produced a dimeric compound,
[(Ph2PEtPDI)Mn]2. Both compounds were characterized by NMR spectroscopy and XRD
analysis. Hydrosilylation of aldehydes and ketones have been studied using
[(PyEtPDEA)Mn] as a pre-catalyst. Similarly, 14 different aldehydes and 6 different
ii
formates were successfully hydrosilylated using [(Ph2PEtPDI)Mn]2 as a pre-catalyst.
Encouraged by the limited number of cobalt catalysts for nitrile hydroboration, we
sought to develop a cobalt catalyst that is active for hydroboration under mild conditions,
which is discussed in the last chapter. Treatment of (PyEtPDI)CoCl2 with excess NaEt3BH
furnished a diamagnetic Co(I) complex [(PyEtPDIH)Co], which exhibits a reduced imine
functionality. Having this compound characterized, a broad substrate scope for both
nitriles and imines have been investigated. The operative mechanism for nitrile
dihydroboration has been investigated based on the outcomes of a series of stoichiometric
reactions using NMR spectroscopy.
Transition metals have been extensively employed to address various challenges
related to catalytic organic transformations, small molecule activation, and energy storage
over the last few decades. Inspired by recent catalytic advances mediated by redox noninnocent
pyridine diimine (PDI) and α-diimine (DI) ligand supported transition metals,
our group has designed new PDI and DI ligands by modifying the imine substituents to
feature donor atoms. My doctoral research is focused on the development of PDI and DI
ligand supported low valent first row metal complexes (Mn, Fe, Co) and their application
in bond activation reactions and the hydrofunctionalization of unsaturated bonds.
First two chapters of this dissertation are centered on the synthesis and
application of redox non-innocent ligand supported low valent iron complexes. Notably,
reduction of a DI-based iron dibromide led to the formation of a low valent iron
dinitrogen compound. This compound was found to undergo a sequential C-H and C-P
bond activation processes upon heating to form a dimeric compound. The plausible
mechanism for dimer formation is also described here.
Inspired by the excellent carbonyl hydrosilylation activity of our previously
reported Mn catalyst, (Ph2PPrPDI)Mn, attempts were made to synthesize second generation
Mn catalyst, which is described in the third chapter. Reduction of (PyEtPDI)MnCl2
furnished a deprotonated backbone methyl group containing Mn compound
[(PyEtPDEA)Mn] whereas reduction of (Ph2PEtPDI)MnCl2 produced a dimeric compound,
[(Ph2PEtPDI)Mn]2. Both compounds were characterized by NMR spectroscopy and XRD
analysis. Hydrosilylation of aldehydes and ketones have been studied using
[(PyEtPDEA)Mn] as a pre-catalyst. Similarly, 14 different aldehydes and 6 different
ii
formates were successfully hydrosilylated using [(Ph2PEtPDI)Mn]2 as a pre-catalyst.
Encouraged by the limited number of cobalt catalysts for nitrile hydroboration, we
sought to develop a cobalt catalyst that is active for hydroboration under mild conditions,
which is discussed in the last chapter. Treatment of (PyEtPDI)CoCl2 with excess NaEt3BH
furnished a diamagnetic Co(I) complex [(PyEtPDIH)Co], which exhibits a reduced imine
functionality. Having this compound characterized, a broad substrate scope for both
nitriles and imines have been investigated. The operative mechanism for nitrile
dihydroboration has been investigated based on the outcomes of a series of stoichiometric
reactions using NMR spectroscopy.
ContributorsGhosh, Chandrani (Author) / Trovitch, Ryan J. (Thesis advisor) / Seo, Don (Committee member) / Moore, Ana (Committee member) / Arizona State University (Publisher)
Created2018
Description
We report the synthesis of novel boronic acid-containing metal-organic frameworks (MOFs), which was synthesized via solvothermal synthesis of cobalt nitride with 3,5-Dicarboxyphenylboronic acid (3,5-DCPBC). Powder X-ray diffraction and BET surface area analysis have been used to verify the successful synthesis of this microporous material.
We have also made the attempts of using zinc nitride and copper nitride as metal sources to synthesize the boronic acid-containing MOFs. However, the attempts were not successful. The possible reason is the existence of copper and zinc ions catalyzed the decomposition of 3,5-Dicarboxyphenylboronic acid, forming isophthalic acid. The ended product has been proved to be isophthalic acid crystals by the single crystal X-ray diffraction. The effects of solvents, reaction temperature, and added bases were investigated. The addition of triethylamine has been shown to tremendously improve the sample crystallinity by facilitating ligand deprotonation
We have also made the attempts of using zinc nitride and copper nitride as metal sources to synthesize the boronic acid-containing MOFs. However, the attempts were not successful. The possible reason is the existence of copper and zinc ions catalyzed the decomposition of 3,5-Dicarboxyphenylboronic acid, forming isophthalic acid. The ended product has been proved to be isophthalic acid crystals by the single crystal X-ray diffraction. The effects of solvents, reaction temperature, and added bases were investigated. The addition of triethylamine has been shown to tremendously improve the sample crystallinity by facilitating ligand deprotonation
ContributorsYu, Jiuhao (Author) / Mu, Bin (Thesis advisor) / Forzani, Erica (Committee member) / Nielsen, David (Committee member) / Arizona State University (Publisher)
Created2014
Description
With the advancements in technology, it is now possible to synthesize new materials with specific microstructures, and enhanced mechanical and physical properties. One of the new class of materials are nanoscale metallic multilayers, often referred to as nanolaminates. Nanolaminates are composed of alternating, nanometer-thick layers of multiple materials (typically metals or ceramics), and exhibit very high strength, wear resistance and radiation tolerance. This thesis is focused on the fabrication and mechanical characterization of nanolaminates composed of Copper and Cobalt, two metals which are nearly immiscible across the entire composition range. The synthesis of these Cu-Co nanolaminates is performed using sputtering, a well-known and technologically relevant physical vapor deposition process. X-ray diffraction is used to characterize the microstructure of the nanolaminates. Cu-Co nanolaminates with different layer thicknesses are tested using microelectromechanical systems (MEMS) based tensile testing devices fabricated using photolithography and etching processes. The stress-strain behavior of nanolaminates with varying layer thicknesses are analysed and correlated to their microstructure.
ContributorsRajarajan, Santhosh Kiran (Author) / Rajagopalan, Jagannathan (Thesis advisor) / Oswald, Jay (Committee member) / Solanki, Kiran (Committee member) / Arizona State University (Publisher)
Created2019