Matching Items (22)
Description
Buck converters are electronic devices that changes a voltage from one level to a lower one and are present in many everyday applications. However, due to factors like aging, degradation or failures, these devices require a system identification process to track and diagnose their parameters. The system identification process should be performed on-line to not affect the normal operation of the device. Identifying the parameters of the system is essential to design and tune an adaptive proportional-integral-derivative (PID) controller.
Three techniques were used to design the PID controller. Phase and gain margin still prevails as one of the easiest methods to design controllers. Pole-zero cancellation is another technique which is based on pole-placement. However, although these controllers can be easily designed, they did not provide the best response compared to the Frequency Loop Shaping (FLS) technique. Therefore, since FLS showed to have a better frequency and time responses compared to the other two controllers, it was selected to perform the adaptation of the system.
An on-line system identification process was performed for the buck converter using indirect adaptation and the least square algorithm. The estimation error and the parameter error were computed to determine the rate of convergence of the system. The indirect adaptation required about 2000 points to converge to the true parameters prior designing the controller. These results were compared to the adaptation executed using robust stability condition (RSC) and a switching controller. Two different scenarios were studied consisting of five plants that defined the percentage of deterioration of the capacitor and inductor within the buck converter. The switching logic did not always select the optimal controller for the first scenario because the frequency response of the different plants was not significantly different. However, the second scenario consisted of plants with more noticeable different frequency responses and the switching logic selected the optimal controller all the time in about 500 points. Additionally, a disturbance was introduced at the plant input to observe its effect in the switching controller. However, for reasonable low disturbances no change was detected in the proper selection of controllers.
Three techniques were used to design the PID controller. Phase and gain margin still prevails as one of the easiest methods to design controllers. Pole-zero cancellation is another technique which is based on pole-placement. However, although these controllers can be easily designed, they did not provide the best response compared to the Frequency Loop Shaping (FLS) technique. Therefore, since FLS showed to have a better frequency and time responses compared to the other two controllers, it was selected to perform the adaptation of the system.
An on-line system identification process was performed for the buck converter using indirect adaptation and the least square algorithm. The estimation error and the parameter error were computed to determine the rate of convergence of the system. The indirect adaptation required about 2000 points to converge to the true parameters prior designing the controller. These results were compared to the adaptation executed using robust stability condition (RSC) and a switching controller. Two different scenarios were studied consisting of five plants that defined the percentage of deterioration of the capacitor and inductor within the buck converter. The switching logic did not always select the optimal controller for the first scenario because the frequency response of the different plants was not significantly different. However, the second scenario consisted of plants with more noticeable different frequency responses and the switching logic selected the optimal controller all the time in about 500 points. Additionally, a disturbance was introduced at the plant input to observe its effect in the switching controller. However, for reasonable low disturbances no change was detected in the proper selection of controllers.
ContributorsSerrano Rodriguez, Victoria Melissa (Author) / Tsakalis, Konstantinos (Thesis advisor) / Bakkaloglu, Bertan (Thesis advisor) / Rodriguez, Armando (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2016
Description
From time immemorial, epilepsy has persisted to be one of the greatest impediments to human life for those stricken by it. As the fourth most common neurological disorder, epilepsy causes paroxysmal electrical discharges in the brain that manifest as seizures. Seizures have the effect of debilitating patients on a physical and psychological level. Although not lethal by themselves, they can bring about total disruption in consciousness which can, in hazardous conditions, lead to fatality. Roughly 1\% of the world population suffer from epilepsy and another 30 to 50 new cases per 100,000 increase the number of affected annually. Controlling seizures in epileptic patients has therefore become a great medical and, in recent years, engineering challenge.
In this study, the conditions of human seizures are recreated in an animal model of temporal lobe epilepsy. The rodents used in this study are chemically induced to become chronically epileptic. Their Electroencephalogram (EEG) data is then recorded and analyzed to detect and predict seizures; with the ultimate goal being the control and complete suppression of seizures.
Two methods, the maximum Lyapunov exponent and the Generalized Partial Directed Coherence (GPDC), are applied on EEG data to extract meaningful information. Their effectiveness have been reported in the literature for the purpose of prediction of seizures and seizure focus localization. This study integrates these measures, through some modifications, to robustly detect seizures and separately find precursors to them and in consequence provide stimulation to the epileptic brain of rats in order to suppress seizures. Additionally open-loop stimulation with biphasic currents of various pairs of sites in differing lengths of time have helped us create control efficacy maps. While GPDC tells us about the possible location of the focus, control efficacy maps tells us how effective stimulating a certain pair of sites will be.
The results from computations performed on the data are presented and the feasibility of the control problem is discussed. The results show a new reliable means of seizure detection even in the presence of artifacts in the data. The seizure precursors provide a means of prediction, in the order of tens of minutes, prior to seizures. Closed loop stimulation experiments based on these precursors and control efficacy maps on the epileptic animals show a maximum reduction of seizure frequency by 24.26\% in one animal and reduction of length of seizures by 51.77\% in another. Thus, through this study it was shown that the implementation of the methods can ameliorate seizures in an epileptic patient. It is expected that the new knowledge and experimental techniques will provide a guide for future research in an effort to ultimately eliminate seizures in epileptic patients.
In this study, the conditions of human seizures are recreated in an animal model of temporal lobe epilepsy. The rodents used in this study are chemically induced to become chronically epileptic. Their Electroencephalogram (EEG) data is then recorded and analyzed to detect and predict seizures; with the ultimate goal being the control and complete suppression of seizures.
Two methods, the maximum Lyapunov exponent and the Generalized Partial Directed Coherence (GPDC), are applied on EEG data to extract meaningful information. Their effectiveness have been reported in the literature for the purpose of prediction of seizures and seizure focus localization. This study integrates these measures, through some modifications, to robustly detect seizures and separately find precursors to them and in consequence provide stimulation to the epileptic brain of rats in order to suppress seizures. Additionally open-loop stimulation with biphasic currents of various pairs of sites in differing lengths of time have helped us create control efficacy maps. While GPDC tells us about the possible location of the focus, control efficacy maps tells us how effective stimulating a certain pair of sites will be.
The results from computations performed on the data are presented and the feasibility of the control problem is discussed. The results show a new reliable means of seizure detection even in the presence of artifacts in the data. The seizure precursors provide a means of prediction, in the order of tens of minutes, prior to seizures. Closed loop stimulation experiments based on these precursors and control efficacy maps on the epileptic animals show a maximum reduction of seizure frequency by 24.26\% in one animal and reduction of length of seizures by 51.77\% in another. Thus, through this study it was shown that the implementation of the methods can ameliorate seizures in an epileptic patient. It is expected that the new knowledge and experimental techniques will provide a guide for future research in an effort to ultimately eliminate seizures in epileptic patients.
ContributorsShafique, Md Ashfaque Bin (Author) / Tsakalis, Konstantinos (Thesis advisor) / Rodriguez, Armando (Committee member) / Muthuswamy, Jitendran (Committee member) / Spanias, Andreas (Committee member) / Arizona State University (Publisher)
Created2016
Description
A systematic top down approach to minimize risk and maximize the profits of an investment over a given period of time is proposed. Macroeconomic factors such as Gross Domestic Product (GDP), Consumer Price Index (CPI), Outstanding Consumer Credit, Industrial Production Index, Money Supply (MS), Unemployment Rate, and Ten-Year Treasury are used to predict/estimate asset (sector ETF`s) returns. Fundamental ratios of individual stocks are used to predict the stock returns. An a priori known cash-flow sequence is assumed available for investment. Given the importance of sector performance on stock performance, sector based Exchange Traded Funds (ETFs) for the S&P; and Dow Jones are considered and wealth is allocated. Mean variance optimization with risk and return constraints are used to distribute the wealth in individual sectors among the selected stocks. The results presented should be viewed as providing an outer control/decision loop generating sector target allocations that will ultimately drive an inner control/decision loop focusing on stock selection. Receding horizon control (RHC) ideas are exploited to pose and solve two relevant constrained optimization problems. First, the classic problem of wealth maximization subject to risk constraints (as measured by a metric on the covariance matrices) is considered. Special consideration is given to an optimization problem that attempts to minimize the peak risk over the prediction horizon, while trying to track a wealth objective. It is concluded that this approach may be particularly beneficial during downturns - appreciably limiting downside during downturns while providing most of the upside during upturns. Investment in stocks during upturns and in sector ETF`s during downturns is profitable.
ContributorsChitturi, Divakar (Author) / Rodriguez, Armando (Thesis advisor) / Tsakalis, Konstantinos S (Committee member) / Si, Jennie (Committee member) / Arizona State University (Publisher)
Created2010
Description
Object sorting is a very common application especially in the industry setting, but this is a labor intensive and time consuming process and it proves to be challenging if done manually. Thanks to the rapid development in technology now almost all these object sorting tasks are partially or completely automated. Image processing techniques are essential for the full operation of such a pick and place robot as it is responsible for perceiving the environment and to correctly identify ,classify and localize the different objects in it. In order for the robots to perform accurate object sorting with efficiency and stability this thesis discusses how different Deep learning based perception techniques can be used. In the era of Artificial Intelligence this sorting problem can be done more efficiently than the existing techniques. This thesis presents different image processing techniques and algorithms that can be used to perform object sorting efficiently. A comparison between three different deep learning based techniques is presented and their pros and cons are discussed. Furthermore this thesis also presents a comprehensive study about the kinematics and the dynamics involved in a 2 Degree of Freedom Robotic Manipulator .
ContributorsRanganathan, Pavithra (Author) / Rodriguez, Armando (Thesis advisor) / Si, Jennie (Committee member) / Berman, Spring (Committee member) / Arizona State University (Publisher)
Created2021
Description
One of the main challenges in testing artificial intelligence (AI) enabled cyber physicalsystems (CPS) such as autonomous driving systems and internet-of-things (IoT) medical
devices is the presence of machine learning components, for which formal properties are
difficult to establish. In addition, operational components interaction circumstances, inclusion of human-in-the-loop, and environmental changes result in a myriad of safety concerns
all of which may not only be comprehensibly tested before deployment but also may not
even have been detected during design and testing phase. This dissertation identifies major challenges of safety verification of AI-enabled safety critical systems and addresses the
safety problem by proposing an operational safety verification technique which relies on
solving the following subproblems:
1. Given Input/Output operational traces collected from sensors/actuators, automatically
learn a hybrid automata (HA) representation of the AI-enabled CPS.
2. Given the learned HA, evaluate the operational safety of AI-enabled CPS in the field.
This dissertation presents novel approaches for learning hybrid automata model from time
series traces collected from the operation of the AI-enabled CPS in the real world for linear
and nonlinear CPS. The learned model allows operational safety to be stringently evaluated
by comparing the learned HA model against a reference specifications model of the system.
The proposed techniques are evaluated on the artificial pancreas control system
devices is the presence of machine learning components, for which formal properties are
difficult to establish. In addition, operational components interaction circumstances, inclusion of human-in-the-loop, and environmental changes result in a myriad of safety concerns
all of which may not only be comprehensibly tested before deployment but also may not
even have been detected during design and testing phase. This dissertation identifies major challenges of safety verification of AI-enabled safety critical systems and addresses the
safety problem by proposing an operational safety verification technique which relies on
solving the following subproblems:
1. Given Input/Output operational traces collected from sensors/actuators, automatically
learn a hybrid automata (HA) representation of the AI-enabled CPS.
2. Given the learned HA, evaluate the operational safety of AI-enabled CPS in the field.
This dissertation presents novel approaches for learning hybrid automata model from time
series traces collected from the operation of the AI-enabled CPS in the real world for linear
and nonlinear CPS. The learned model allows operational safety to be stringently evaluated
by comparing the learned HA model against a reference specifications model of the system.
The proposed techniques are evaluated on the artificial pancreas control system
ContributorsLamrani, Imane (Author) / Gupta, Sandeep Ks (Thesis advisor) / Banerjee, Ayan (Committee member) / Zhang, Yi (Committee member) / Runger, George C. (Committee member) / Rodriguez, Armando (Committee member) / Arizona State University (Publisher)
Created2020
Description
This work is concerned with how best to reconstruct images from limited angle tomographic measurements. An introduction to tomography and to limited angle tomography will be provided and a brief overview of the many fields to which this work may contribute is given.
The traditional tomographic image reconstruction approach involves Fourier domain representations. The classic Filtered Back Projection algorithm will be discussed and used for comparison throughout the work. Bayesian statistics and information entropy considerations will be described. The Maximum Entropy reconstruction method will be derived and its performance in limited angular measurement scenarios will be examined.
Many new approaches become available once the reconstruction problem is placed within an algebraic form of Ax=b in which the measurement geometry and instrument response are defined as the matrix A, the measured object as the column vector x, and the resulting measurements by b. It is straightforward to invert A. However, for the limited angle measurement scenarios of interest in this work, the inversion is highly underconstrained and has an infinite number of possible solutions x consistent with the measurements b in a high dimensional space.
The algebraic formulation leads to the need for high performing regularization approaches which add constraints based on prior information of what is being measured. These are constraints beyond the measurement matrix A added with the goal of selecting the best image from this vast uncertainty space. It is well established within this work that developing satisfactory regularization techniques is all but impossible except for the simplest pathological cases. There is a need to capture the "character" of the objects being measured.
The novel result of this effort will be in developing a reconstruction approach that will match whatever reconstruction approach has proven best for the types of objects being measured given full angular coverage. However, when confronted with limited angle tomographic situations or early in a series of measurements, the approach will rely on a prior understanding of the "character" of the objects measured. This understanding will be learned by a parallel Deep Neural Network from examples.
The traditional tomographic image reconstruction approach involves Fourier domain representations. The classic Filtered Back Projection algorithm will be discussed and used for comparison throughout the work. Bayesian statistics and information entropy considerations will be described. The Maximum Entropy reconstruction method will be derived and its performance in limited angular measurement scenarios will be examined.
Many new approaches become available once the reconstruction problem is placed within an algebraic form of Ax=b in which the measurement geometry and instrument response are defined as the matrix A, the measured object as the column vector x, and the resulting measurements by b. It is straightforward to invert A. However, for the limited angle measurement scenarios of interest in this work, the inversion is highly underconstrained and has an infinite number of possible solutions x consistent with the measurements b in a high dimensional space.
The algebraic formulation leads to the need for high performing regularization approaches which add constraints based on prior information of what is being measured. These are constraints beyond the measurement matrix A added with the goal of selecting the best image from this vast uncertainty space. It is well established within this work that developing satisfactory regularization techniques is all but impossible except for the simplest pathological cases. There is a need to capture the "character" of the objects being measured.
The novel result of this effort will be in developing a reconstruction approach that will match whatever reconstruction approach has proven best for the types of objects being measured given full angular coverage. However, when confronted with limited angle tomographic situations or early in a series of measurements, the approach will rely on a prior understanding of the "character" of the objects measured. This understanding will be learned by a parallel Deep Neural Network from examples.
ContributorsDallmann, Nicholas A. (Author) / Tsakalis, Konstantinos (Thesis advisor) / Hardgrove, Craig (Committee member) / Rodriguez, Armando (Committee member) / Si, Jennie (Committee member) / Arizona State University (Publisher)
Created2020
Description
The Inverted Pendulum on a Cart is a classical control theory problem that helps understand the importance of feedback control systems for a coupled plant. In this study, a custom built pendulum system is coupled with a linearly actuated cart and a control system is designed to show the stability of the pendulum. The three major objectives of this control system are to swing up the pendulum, balance the pendulum in the inverted position (i.e. $180^\circ$), and maintain the position of the cart. The input to this system is the translational force applied to the cart using the rotation of the tires. The main objective of this thesis is to design a control system that will help in balancing the pendulum while maintaining the position of the cart and implement it in a robot. The pendulum is made free rotating with the help of ball bearings and the angle of the pendulum is measured using an Inertial Measurement Unit (IMU) sensor. The cart is actuated by two Direct Current (DC) motors and the position of the cart is measured using encoders that generate pulse signals based on the wheel rotation. The control is implemented in a cascade format where an inner loop controller is used to stabilize and balance the pendulum in the inverted position and an outer loop controller is used to control the position of the cart. Both the inner loop and outer loop controllers follow the Proportional-Integral-Derivative (PID) control scheme with some modifications for the inner loop. The system is first mathematically modeled using the Newton-Euler first principles method and based on this model, a controller is designed for specific closed-loop parameters. All of this is implemented on hardware with the help of an Arduino Due microcontroller which serves as the main processing unit for the system.
ContributorsNamasivayam, Vignesh (Author) / Tsakalis, Konstantinos (Thesis advisor) / Rodriguez, Armando (Committee member) / Si, Jennie (Committee member) / Shafique, Md. Ashfaque Bin (Committee member) / Arizona State University (Publisher)
Created2021
Description
This thesis lays down a foundation for more advanced work on bipeds by carefully examining cart-inverted pendulum systems (CIPS, often used to approximate each leg of a biped) and associated closed loop performance tradeoffs. A CIPS is characterized by an instability (associated with the tendency of the pendulum to fall) and a right half plane (RHP, non-minimum phase) zero (associated with the cart displacement x). For such a system, the zero is typically close to (and smaller) than the instability. As such, a classical PK control structure would result in very poor sensitivity properties.It is therefore common to use a hierarchical inner-outer loop structure. As such, this thesis examines how such a structure can be used to improve sensitivity properties beyond a classic PK structure and systematically tradeoff sensitivity properties at the plant input/output. While the instability requires a minimum bandwidth at the plant input, the RHP zero imposes a maximum bandwidth on the cart displacement x.
Three CIPs are examined – one with a long, short and an intermediately sized pendulum. We show that while the short pendulum system is the most unstable and requires the largest bandwidth at the plant input for stabilization (hardest to control), it also has the largest RHP zero. Consequently, it will permit the largest cart displacement x-bandwidth, and hence, one can argue that the short pendulum system is easiest to control. Similarly, the long pendulum system is the least unstable and requires smallest bandwidth at the plant input for stabilization (easiest to control). However, because this system also possesses the smallest RHP zero it will permit the smallest cart displacement x-bandwidth, and hence, one can argue that the long pendulum system is the hardest to control. Analogous “intermediate conclusions” can be drawn for the system with the “intermediately sized” pendulum. A set of simple academic examples (growing in plant and controller complexity) are introduced to illustrate basic tradeoffs and guide the presentation of the trade studies.
ContributorsSarkar, Soham (Author) / Rodriguez, Armando (Thesis advisor) / Berman, Spring (Thesis advisor) / Marvi, Hamidreza (Committee member) / Arizona State University (Publisher)
Created2021
Description
This project examines the dynamics and design of control systems for a rocket in propulsive ascent and descent using a simplified model with motion constrained to a vertical plane. The governing differential equations are analyzed. They are then linearized, after which transfer functions are derived relating controllable input variables to controlled output variables. The effect of changes in various parameters as well as other aspects of the system are examined. Methods for controller design based on the derived transfer functions are discussed. This will include the discussion of control of the final descent and landing of the rocket. Lastly, there is a brief discussion about both the successes and limitations of the model analyzed.
ContributorsWarner, Adin (Author) / Rodriguez, Armando (Thesis director) / Shafique, Ashfaque (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2021-12
Description
In this study, the engineers from biomedical engineering and electrical engineering researched and analyzed the components, uses, and processes for the brain and the Brain-Computer Interfaces (BCIs). They investigated the basics on the brain, the signals, and the overall uses of the devices. There have been many uses for electroencephalogram (EEG) signals, including prosthetics for patients after nerve injuries, cursor movements on a computer, moving vehicles, and many more projects. There are studies currently in progress and that will be in progress in the future that extend the uses of BCIs. The researchers in this thesis focused more on the processes the scientists used to approach the given problem. Some worked with patients to better his or her life, while others worked with volunteers to gain more knowledge of the brain and/or the BCIs. This thesis includes many different approaches for many unique projects. The analysis includes the location of the signal, the processing of the signal, the filtering of the signal, the transmission of the signal, and the movement of the device based on the signal. The current BCIs are not ready to be in patient’s daily lives, but the researchers are trying to create and perfect them in order to help as many patients as possible. As a biomedical engineer, the researchers in this thesis can apply the knowledge from the articles to solving potential problems in the future and further specific studies.
ContributorsKerlee, Jessica (Author) / Rodriguez, Armando (Thesis director) / Muthuswamy, Jitendran (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05