Matching Items (1,502)
Filtering by
- Creators: Marine Biological Laboratory Archives
Description
Multiphase flows are an important part of many natural and technological phe- nomena such as ocean-air coupling (which is important for climate modeling) and the atomization of liquid fuel jets in combustion engines. The unique challenges of multiphase flow often make analytical solutions to the governing equations impos- sible and experimental investigations very difficult. Thus, high-fidelity numerical simulations can play a pivotal role in understanding these systems. This disserta- tion describes numerical methods developed for complex multiphase flows and the simulations performed using these methods. First, the issue of multiphase code verification is addressed. Code verification answers the question "Is this code solving the equations correctly?" The method of manufactured solutions (MMS) is a procedure for generating exact benchmark solutions which can test the most general capabilities of a code. The chief obstacle to applying MMS to multiphase flow lies in the discontinuous nature of the material properties at the interface. An extension of the MMS procedure to multiphase flow is presented, using an adaptive marching tetrahedron style algorithm to compute the source terms near the interface. Guidelines for the use of the MMS to help locate coding mistakes are also detailed. Three multiphase systems are then investigated: (1) the thermocapillary motion of three-dimensional and axisymmetric drops in a confined apparatus, (2) the flow of two immiscible fluids completely filling an enclosed cylinder and driven by the rotation of the bottom endwall, and (3) the atomization of a single drop subjected to a high shear turbulent flow. The systems are simulated numerically by solving the full multiphase Navier- Stokes equations coupled to the various equations of state and a level set interface tracking scheme based on the refined level set grid method. The codes have been parallelized using MPI in order to take advantage of today's very large parallel computational architectures. In the first system, the code's ability to handle surface tension and large tem- perature gradients is established. In the second system, the code's ability to sim- ulate simple interface geometries with strong shear is demonstrated. In the third system, the ability to handle extremely complex geometries and topology changes with strong shear is shown.
ContributorsBrady, Peter, Ph.D (Author) / Herrmann, Marcus (Thesis advisor) / Lopez, Juan (Thesis advisor) / Adrian, Ronald (Committee member) / Calhoun, Ronald (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2011
Description
The heat and mass transfer phenomena in micro-scale for the mass transfer phenomena on drug in cylindrical matrix system, the simulation of oxygen/drug diffusion in a three dimensional capillary network, and a reduced chemical kinetic modeling of gas turbine combustion for Jet propellant-10 have been studied numerically. For the numerical analysis of the mass transfer phenomena on drug in cylindrical matrix system, the governing equations are derived from the cylindrical matrix systems, Krogh cylinder model, which modeling system is comprised of a capillary to a surrounding cylinder tissue along with the arterial distance to veins. ADI (Alternative Direction Implicit) scheme and Thomas algorithm are applied to solve the nonlinear partial differential equations (PDEs). This study shows that the important factors which have an effect on the drug penetration depth to the tissue are the mass diffusivity and the consumption of relevant species during the time allowed for diffusion to the brain tissue. Also, a computational fluid dynamics (CFD) model has been developed to simulate the blood flow and oxygen/drug diffusion in a three dimensional capillary network, which are satisfied in the physiological range of a typical capillary. A three dimensional geometry has been constructed to replicate the one studied by Secomb et al. (2000), and the computational framework features a non-Newtonian viscosity model for blood, the oxygen transport model including in oxygen-hemoglobin dissociation and wall flux due to tissue absorption, as well as an ability to study the diffusion of drugs and other materials in the capillary streams. Finally, a chemical kinetic mechanism of JP-10 has been compiled and validated for a wide range of combustion regimes, covering pressures of 1atm to 40atm with temperature ranges of 1,200 K - 1,700 K, which is being studied as a possible Jet propellant for the Pulse Detonation Engine (PDE) and other high-speed flight applications such as hypersonic missiles. The comprehensive skeletal mechanism consists of 58 species and 315 reactions including in CPD, Benzene formation process by the theory for polycyclic aromatic hydrocarbons (PAH) and soot formation process on the constant volume combustor, premixed flame characteristics.
ContributorsBae, Kang-Sik (Author) / Lee, Taewoo (Thesis advisor) / Huang, Huei-Ping (Committee member) / Calhoun, Ronald (Committee member) / Phelan, Patrick (Committee member) / Lopez, Juan (Committee member) / Arizona State University (Publisher)
Created2012
Description
The dynamics of a fluid flow inside 2D square and 3D cubic cavities
under various configurations were simulated and analyzed using a
spectral code I developed.
This code was validated against known studies in the 3D lid-driven
cavity. It was then used to explore the various dynamical behaviors
close to the onset of instability of the steady-state flow, and explain
in the process the mechanism underlying an intermittent bursting
previously observed. A fairly complete bifurcation picture emerged,
using a combination of computational tools such as selective
frequency damping, edge-state tracking and subspace restriction.
The code was then used to investigate the flow in a 2D square cavity
under stable temperature stratification, an idealized version of a lake
with warmer water at the surface compared to the bottom. The governing
equations are the Navier-Stokes equations under the Boussinesq approximation.
Simulations were done over a wide range of parameters of the problem quantifying
the driving velocity at the top (e.g. wind) and the strength of the stratification.
Particular attention was paid to the mechanisms associated with the onset of
instability of the base steady state, and the complex nontrivial dynamics
occurring beyond onset, where the presence of multiple states leads to a
rich spectrum of states, including homoclinic and heteroclinic chaos.
A third configuration investigates the flow dynamics of a fluid in a rapidly
rotating cube subjected to small amplitude modulations. The responses were
quantified by the global helicity and energy measures, and various peak
responses associated to resonances with intrinsic eigenmodes of the cavity
and/or internal retracing beams were clearly identified for the first time.
A novel approach to compute the eigenmodes is also described, making accessible
a whole catalog of these with various properties and dynamics. When the small
amplitude modulation does not align with the rotation axis (precession) we show
that a new set of eigenmodes are primarily excited as the angular velocity
increases, while triadic resonances may occur once the nonlinear regime kicks in.
under various configurations were simulated and analyzed using a
spectral code I developed.
This code was validated against known studies in the 3D lid-driven
cavity. It was then used to explore the various dynamical behaviors
close to the onset of instability of the steady-state flow, and explain
in the process the mechanism underlying an intermittent bursting
previously observed. A fairly complete bifurcation picture emerged,
using a combination of computational tools such as selective
frequency damping, edge-state tracking and subspace restriction.
The code was then used to investigate the flow in a 2D square cavity
under stable temperature stratification, an idealized version of a lake
with warmer water at the surface compared to the bottom. The governing
equations are the Navier-Stokes equations under the Boussinesq approximation.
Simulations were done over a wide range of parameters of the problem quantifying
the driving velocity at the top (e.g. wind) and the strength of the stratification.
Particular attention was paid to the mechanisms associated with the onset of
instability of the base steady state, and the complex nontrivial dynamics
occurring beyond onset, where the presence of multiple states leads to a
rich spectrum of states, including homoclinic and heteroclinic chaos.
A third configuration investigates the flow dynamics of a fluid in a rapidly
rotating cube subjected to small amplitude modulations. The responses were
quantified by the global helicity and energy measures, and various peak
responses associated to resonances with intrinsic eigenmodes of the cavity
and/or internal retracing beams were clearly identified for the first time.
A novel approach to compute the eigenmodes is also described, making accessible
a whole catalog of these with various properties and dynamics. When the small
amplitude modulation does not align with the rotation axis (precession) we show
that a new set of eigenmodes are primarily excited as the angular velocity
increases, while triadic resonances may occur once the nonlinear regime kicks in.
ContributorsWu, Ke (Author) / Lopez, Juan (Thesis advisor) / Welfert, Bruno (Thesis advisor) / Tang, Wenbo (Committee member) / Platte, Rodrigo (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2019
Description
We study an idealized model of a wind-driven ocean, namely a 2-D lid-driven cavity with a linear temperature gradient along the side walls and constant hot and cold temperatures on the top and bottom boundaries respectively. In particular, we determine numerically the response on flow field and temperature stratification associated with the velocity of the lid driven by harmonic forcing using the Navier-Stokes equations with Boussinesq approximation in an attempt to gain an understanding of how variations of external forces (such as the wind over the ocean) transfer energy to a system by exciting internal modes through resonances. The time variation of the forcing, accounting for turbulence at the boundary is critical for allowing penetration of energy waves through the stratified medium in which the angles of the internal waves depend on these perturbation frequencies. Determining the results of the interaction of two 45 degree angle wave beams at the center of the cavity is of particular interest.
ContributorsTaylor, Stephanie Lynn (Author) / Welfert, Bruno (Thesis director) / Lopez, Juan (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Economics Program in CLAS (Contributor) / W. P. Carey School of Business (Contributor)
Created2015-05
Description
First, in a large-scale structure, a 3-D CFD model was built to simulate flow and temperature distributions. The flow patterns and temperature distributions are characterized and validated through spot measurements. The detailed understanding of them then allows for optimization of the HVAC configuration because identification of the problematic flow patterns and temperature mis-distributions leads to some corrective measures. Second, an appropriate form of the viscous dissipation term in the integral form of the conservation equation was considered, and the effects of momentum terms on the computed drop size in pressure-atomized sprays were examined. The Sauter mean diameter (SMD) calculated in this manner agrees well with experimental data of the drop velocities and sizes. Using the suggested equation with the revised treatment of liquid momentum setup, injection parameters can be directly input to the system of equations. Thus, this approach is capable of incorporating the effects of injection parameters for further considerations of the drop and velocity distributions under a wide range of spray geometry and injection conditions. Lastly, groundwater level estimation was investigated using compressed sensing (CS). To satisfy a general property of CS, a random measurement matrix was used, the groundwater network was constructed, and finally the l-1 optimization was run. Through several validation tests, correct estimation of groundwater level by CS was shown. Using this setup, decreasing trends in groundwater level in the southwestern US was shown. The suggested method is effective in that the total measurements of registered wells can be reduced down by approximately 42 %, sparse data can be visualized and a possible approach for groundwater management during extreme weather changes, e.g. in California, was demonstrated.
ContributorsLee, Joon Young (Author) / Lee, Taewoo (Thesis advisor) / Huang, Huei-Ping (Committee member) / Lopez, Juan (Committee member) / Phelan, Patrick (Committee member) / Chen, Kangping (Committee member) / Arizona State University (Publisher)
Created2015
Description
This project is a synthesis of the author's learning over the semesters in working with the CFD Group at Arizona State University. The incompressible Navier-Stokes equations are overviewed, starting with the derivation from the continuity equation, then non-dimensionalization, methods of solving and computing quantities of interest. The rest of this document is expository analysis of solutions in a confined fluid flow, building toward a parametrically forced regime that generates complex flow patterns including Faraday waves. The solutions come from recently published studies Dynamics in a stably stratified tilted square cavity (Grayer et al.) and Parametric instabilities of a stratified shear layer (Buchta et al).
ContributorsBuchta, Matthew Ryan (Author) / Welfert, Bruno (Thesis director) / Yalim, Jason (Committee member) / Lopez, Juan (Committee member) / School of Mathematical and Statistical Sciences (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
ContributorsMarine Biological Laboratory Archives (Publisher) / Arizona Board of Regents (Publisher)
Created1925-19-39 (uncertain)
ContributorsMarine Biological Laboratory Archives (Publisher) / Arizona Board of Regents (Publisher)
Created1934
