Matching Items (36)
Filtering by
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
- Resource Type: Text
Description
Breast microcalcifications are a potential indicator of cancerous tumors. Current visualization methods are either uncomfortable or impractical. Impedance measurement studies have been performed, but not in a clinical setting due to a low sensitivity and specificity. We are hoping to overcome this challenge with the development of a highly accurate impedance probe on a biopsy needle. With this technique, microcalcifications and the surrounding tissue could be differentiated in an efficient and comfortable manner than current techniques for biopsy procedures. We have developed and tested a functioning prototype for a biopsy needle using bioimpedance sensors to detect microcalcifications in the human body. In the final prototype a waveform generator sends a sin wave at a relatively low frequency(<1KHz) into the pre-amplifier, which both stabilizes and amplifies the signal. A modified howland bridge is then used to achieve a steady AC current through the electrodes. The voltage difference across the electrodes is then used to calculate the impedance being experienced between the electrodes. In our testing, the microcalcifications we are looking for have a noticeably higher impedance than the surrounding breast tissue, this spike in impedance is used to signal the presence of the calcifications, which are then sampled for examination by radiology.
ContributorsWen, Robert Bobby (Co-author) / Grula, Adam (Co-author) / Vergara, Marvin (Co-author) / Ramkumar, Shreya (Co-author) / Kozicki, Michael (Thesis director) / Ranjani, Kumaran (Committee member) / School of Molecular Sciences (Contributor) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
In competitive Taekwondo, Electronic Body Protectors (EBPs) are used to register hits made by players during sparring. EBPs are comprised of three main components: chest guard, foot sock, and headgear. This equipment interacts with each other through the use of magnets, electric sensors, transmitters, and a receiver. The receiver is connected to a computer programmed with software to process signals from the transmitter and determine whether or not a competitor scored a point. The current design of EBPs, however, have numerous shortcomings, including sensing false positives, failing to register hits, costing too much, and relying on human judgment. This thesis will thoroughly delineate the operation of the current EBPs used and discuss research performed in order to eliminate these weaknesses.
ContributorsSpell, Valerie Anne (Author) / Kozicki, Michael (Thesis director) / Kitchen, Jennifer (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The purpose of this research is to optically characterize germanium-based chalcogenide thin films and evaluate how their properties change when the composition is altered. The composition changes based on if the chalcogenide contains selenium or sulfur, if the film is 60 nanometers or 200 nanometers, and if the film is doped with silver (ranging from 0 nanometers to 30 nanometers). These amorphous germanium-chalcogenide thin films exhibit interesting properties when doped with silver, such as transporting ions within the film in addition to electron transport. Using optical characterization techniques such as UV-Vis spectroscopy, profilometry, and ellipsometry, parameters that describe the optical characteristics are found, including the absorption coefficient, refractive index, optical band gap energy, and information on the density of states. This research concludes that as silver content within the film increases, the optical bandgap energy decreases—this is a consistent trend in existing literature. Having a better understanding of the materials’ physical properties will be useful to aid in the creation of microsystems based on these materials by selecting optimal composition and growth conditions. Important applications using these materials are currently being researched, including variable capacitor devices relying on the ionic conductor behavior these materials display. The optical properties like the absorption coefficient and the optical bandgap energy are invaluable in designing these applications effectively.
ContributorsRicks, Amberly Frances (Author) / Gonzalez Velo, Yago (Thesis director) / Kozicki, Michael (Committee member) / Holman, Zachary (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Communication between the physical and digital world via software, embedded sensors and network connectivity is referred to by the term, the "Internet of Things" (IoT) [1]. The IoT transforms natural objects into "smart devices" to improve accuracy, reduce human intervention, and provide real-time data [1]. Smart weather stations that upload information, including temperature and humidity, to the Internet are already available. However, these products are often expensive and programmed only for single-purpose use. The LoRa Weather Station is a low cost, low power and low maintenance IoT solution that combines Microchip Technology's LoRa RN2903 module along with Mikroelektronika's Weather Click sensor. This report discusses how the LoRa Weather Station was created, primarily focusing on the LoRa gateway setup by a Raspberry Pi local web server. This project was completed by four electrical engineering students in the EEE 488 and 489 Senior Design courses at Arizona State University from Fall 2016 to Spring 2017. Total expenses for the project were $717.84, including the LoRa gateway which amounted to $104 (see Appendix C for the Bill of Materials).
ContributorsLeon, Miranda Cristina (Author) / Kozicki, Michael (Thesis director) / Balaban, Mehmet (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Having the proper biomechanical and neuromuscular kinematics while performing an athletic motion is essential for athletes. Deviations from proper form in execution of the kinetic chain of an athletic movement may result in suboptimal performance and oftentimes an elevated likelihood of injury. The solutions currently available to athletes to account for digression from proper form are limited to sight and feel analysis of movement by the athletes and coaches and basic medical and athletic analysis equipment that is unsuitable for real-time analysis, the rigor and speed of dynamic athletic motions, and in-field use. The solution proposed herein is one of an in-shoe force measurement and foot positioning system designed to measure the ground reaction force generated by and alignment of an athlete's feet during an athletic motion. Research into various sports has found that the feet play a foundational role in proper execution of the kinetic chain, wherein the alignment, positioning, force generation, and timing of the feet may dictate proper execution of subsequent segments in the kinetic chain. The goal of the present design is to provide athletes with a solution to allow for real-time kinematic analysis of athletic motions using an in-shoe force measurement and foot positioning system. An understanding into the compensatory effect of foot misalignment, mismatched timing, and under or overcompensated ground reaction force generation by the feet on ensuing segments of the kinetic chain in conjunction with the present design can allow for athletes to measure and determine their degree of accuracy in form execution and to predict potential injuries resulting from deviations in form. Our design of an athletic shoe comprising an in-shoe force measurement system provides a dynamic solution to sports-related injuries presently unavailable to athletes.
ContributorsKiaei, Nima (Co-author) / Makhija, Abhay (Co-author) / Kiaei, Sayfe (Thesis director) / Kozicki, Michael (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
In this project, an existing waveform generator designed by the vagus nerve stimulation (VNS) technology firm Hoolest Performance Technologies was modified and characterized. Voltage feedback and current feedback systems were designed in order to improve output voltage and current regulation. A wireless communication system was implemented onboard the newly designed waveform generator in order to improve user experience and allow the system to be controlled remotely. Finally, a custom printed circuit board was designed according to the established circuit schematics for the above components, and the layout was miniaturized to a total board footprint area of 1.5 square inches. The completed device was characterized according to several figures of merit including current consumption, voltage and current regulation, and short-circuit behavior.
ContributorsPatterson, John Michael (Author) / Kozicki, Michael (Thesis director) / Mian, Sami (Committee member) / Electrical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The Solar Powered Amphibious Transport (SPAT) is an amphibious hovercraft that uses solar energy as a power source and is fully controlled via iOS application on a phone or tablet. The hovercraft field is relatively unexplored with a solar power source, and one of the goals of the SPAT was to spark interest in sustainable hovercraft design. By challenging the potential of solar power, the SPAT proves that solar energy can be used in high power transportation applications. The second motive behind the creation a hovercraft was for it to serve as a disaster relief vehicle. A hovercraft can traverse both ground and water, which makes it ideal in flooded areas. With the SPAT being remote controlled it can allow the operator to stay at a safe distance while sending supplies or rescuing a person. The SPAT design covered multiple size options, however a small prototype version was built to serve as a proof of concept that a larger solar hovercraft is possible. Our analysis suggests that a larger craft will be able to carry more weight, and be more power efficient. A larger SPAT could help deliver supplies or rescue stranded people after a flood or hurricane. One issue faced however, was that many hovercrafts are highly expensive. The SPAT prototype was designed on a tight budget that did not exceed $800. The possibility of achieving this cost levels allows hovercraft to be a reasonable option for disaster relief agencies. After many long hours spent the SPAT became a fully operational remote control solar powered hovercraft.
ContributorsDavis, Parker William (Co-author) / Clenney, Jacob (Co-author) / Nachman, Michael (Co-author) / Melillo, Nick (Co-author) / Bertoni, Mariana (Thesis director) / Kozicki, Michael (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Year after year, babies are dying after being left behind in cars that reach dangerous levels of heat. This project, conducted by the Hot Babies Senior Design Team, aims to solve this growing issue with the development of a hot car baby monitor. This device is integrated with multiple sensors: temperature, sound, carbon dioxide, and motion in order to detect life inside of a hot car. By using different sensors, a combination of threshold activated signals can be used to provide high quality monitoring and reduce false alarms from outside noise. Once the algorithms predict the presence of a living being inside a dangerously hot vehicle, the baby car monitor will send out text messages warning designated parents and/or guardians of the issue. The baby car monitor is further optimized with a low battery indicator and a sleep mode feature. The schedule of the project is separated into the fall and spring semesters. For the fall semester, all of the sensors and the microcontroller were purchased and tested individually. For the spring semester, all of the sensors were integrated together on a PCB and tested under hot car environments. Additionally, features such as the text messaging interface and the sleep mode were added. The budget of the final working product is roughly ~ $200. The cost includes the different sensors, microcontroller, data plan, text messaging module, and PCB. When mass produced, the cost is expected to go down.
ContributorsQin, Eric C (Co-author) / Luc, Andrew (Co-author) / Cheung, Wai (Co-author) / Moore, Jenna (Co-author) / Vittal, Vijay (Thesis director) / Kozicki, Michael (Committee member) / Electrical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
With the progression of different industries moving away from employing secretaries for business professionals and professors, there exists a void in the area of personal assistance. This problem has existing solutions readily available to replace this service, i.e. secretary or personal assistant, tend to range from expensive and useful to inexpensive and not efficient. This leaves a low cost niche into the market of a virtual office assistant or manager to display messages and to help direct people in obtaining contact information. The development of a low cost solution revolves around the software needed to solve the various problems an accessible and user friendly Virtual Interface in which the owner of the Virtual Office Manager/Assistant can communicate to colleagues who are at standby outside of the owner's office and vice versa. This interface will be allowing the owner to describe the status pertaining to their absence or any other message sent to the interface. For example, the status of the owner's work commute can be described with a simple "Running Late" phrase or a message like "Busy come back in 10 minutes". In addition, any individual with an interest to these entries will have the opportunity to respond back because the device will provide contact information. When idle, the device will show supplemental information such as the owner's calendar and name. The scope of this will be the development and testing of solutions to achieve these goals.
ContributorsOffenberger, Spencer Eliot (Author) / Kozicki, Michael (Thesis director) / Goryll, Michael (Committee member) / Electrical Engineering Program (Contributor) / Computer Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
This document introduces the need for the Rest Egg system and defines an accessible method of smartphone integration. Excessive noise can prevent recovering patients and special needs persons from resting correctly. The Rest Egg was designed for these people- people who are in critical need of quality rest but are often unable to eliminate stressors themselves. This system ensures their environment is calm by alerting caretakers' smartphones if noise reaches abrasive levels. Smartphones were the preferred device due to the wide spread of such devices in today's market. After making open sourcing a goal, something ubiquitous and affordable \u2014 yet usable and dependable \u2014 was necessary for the alert system. These requirements lead to the election an online alert service: Pushover, a trademark and product of Superblock, LLC.
ContributorsJennings, Tyler Blake (Author) / Goryll, Michael (Thesis director) / Kozicki, Michael (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2016-05