Matching Items (16)
Description
Polymer fibers have broad applications in wearable electronics, bulletproof vests, batteries, fuel cells, filters, electrodes, conductive wires, and biomedical materials. Polymer fibers display light density and flexibility but are mostly weak and compliant. The ceramic, metallic, and carbon nanoparticles have been frequently included in polymers for fabricating continuous, durable, and functional composite fibers. Nanoparticles display large specific areas, low defect density and can transfer their superior properties to polymer matrices. The main focus of this thesis is to design, fabricate and characterize the polymer
anocarbon composite fibers with unique microstructures and improved mechanical/thermal performance. The dispersions and morphologies of graphene nanoplatelets (GNPs), the interactions with polyvinyl alcohol (PVA) molecules and their influences on fiber properties are studied. The fibers were fabricated using a dry-jet wet spinning method with engineered spinneret design. Three different structured fibers were fabricated, namely, one-phase polymer fiber (1-phase), two-phase core-shell composite fiber (2-phase), and three-phase co-axial composite fiber (3-phase). These polymer or composite fibers were processed at three stages with drawing temperatures of 100˚C, 150˚C, and 200˚C. Different techniques including the mechanical tester, wide-angle X-Ray diffraction (WAXD), scanning electron microscope (SEM), thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC) have been used to characterize the fiber microstructures and properties.
anocarbon composite fibers with unique microstructures and improved mechanical/thermal performance. The dispersions and morphologies of graphene nanoplatelets (GNPs), the interactions with polyvinyl alcohol (PVA) molecules and their influences on fiber properties are studied. The fibers were fabricated using a dry-jet wet spinning method with engineered spinneret design. Three different structured fibers were fabricated, namely, one-phase polymer fiber (1-phase), two-phase core-shell composite fiber (2-phase), and three-phase co-axial composite fiber (3-phase). These polymer or composite fibers were processed at three stages with drawing temperatures of 100˚C, 150˚C, and 200˚C. Different techniques including the mechanical tester, wide-angle X-Ray diffraction (WAXD), scanning electron microscope (SEM), thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC) have been used to characterize the fiber microstructures and properties.
ContributorsVerma, Rahul (Author) / Song, Kenan (Thesis advisor) / Jiang, Hanqing (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2018
Description
The goal of our research was to develop and validate a method for predicting the mechanical behavior of Additively Manufactured multi-material honeycomb structures. Multiple approaches already exist in the field for modeling the behavior of cellular materials, including the bulk property assumption, homogenization and strut level characterization [1]. With the bulk property approach, the structure is assumed to behave according to what is known about the material in its bulk formulation, without regard to its geometry or scale. With the homogenization technique, the specimen that is being tested is treated as a solid material within the simulation environment even if the physical specimen is not. Then, reduced mechanical properties are assigned to the specimen to account for any voids that exist within the physical specimen. This approach to mechanical behavior prediction in cellular materials is shape dependent. In other words, the same model cannot be used from one specimen to the next if the cell shapes of those lattices differ in any way. When using the strut level characterization approach, a single strut (the connecting member between nodes constituting a cellular material) is isolated and tested. With this approach, there tends to be a significant deviation in the experimental data due to the small size of the isolated struts. Yet it has the advantage of not being shape sensitive, at least in principle. The method that we developed, and chose to test lies within the latter category, and is what we have coined as the Representative Lattice Element (RLE) Method. This method is modeled after the well-established Representative Volume Element (RVE) method [2]. We define the RLE as the smallest unit over which mechanical tests can be conducted that will provide results which are representative of the larger lattice structure. In other words, the theory is that a single member (or beam in this case) of a honeycomb structure can be taken, tests can be conducted on this member to determine the mechanical properties of the representative lattice element and the results will be representative of the mechanical behavior whole structure. To investigate this theory, we designed specimens, conducted various tensile and compression tests, analyzed the recorded data, conducted a micromechanics study, and performed structural simulation work using commercial Finite Element Analysis software.
ContributorsSalti, Ziyad Zuheir (Co-author) / Eppley, Trevor (Co-author) / Bhate, Dhruv (Thesis director) / Song, Kenan (Committee member) / Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The purpose of this project is to assess how well today’s youth is able to learn new skills<br/>in the realm of engineering through online video-conferencing resources. Each semester of this<br/>last year, a class of students in both 3rd and 6th grade learned about computer-aided design (CAD)<br/>and 3D printing through their laptops at school. This was done by conducting online lessons of<br/>TinkerCAD via Zoom and Google Meet. TinkerCAD is a simple website that incorporates easy-to-learn skills and gives students an introduction to some of the basic operations that are used in<br/>everyday CAD endeavors. In each lesson, the students would learn new skills by creating<br/>increasingly difficult objects that would test both their ability to learn new skills and their overall<br/>enjoyment with the subject matter. The findings of this project reflect that students are able to<br/>quickly learn and retain new information relating to CAD. The group of 6th graders was able to<br/>learn much faster, which was expected, but the class of 3rd graders still maintained the<br/>knowledge gained from previous lessons and were able to construct increasingly complicated<br/>objects without much struggle. Overall, the students in both classes enjoyed the lessons and did<br/>not find them too difficult, despite the online environment that we were required to use. Some<br/>students found the material more interesting than others, but in general, the students found it<br/>enjoyable to learn about a new skill that has significant real-world applications
ContributorsWerner, Matthew (Author) / Song, Kenan (Thesis director) / Lin, Elva (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The current Li-ion batteries with organic liquid electrolytes are limited by their safety and energy density. Therefore, ceramic electrolytes are proposed in developing next-generation, energy-dense Li-metal batteries by replacing organic liquid electrolytes to improve safety and performance. Among numerous ceramic Li-ion conductors, garnet-based solid electrolyte c-Li7La3Zr2O12 (c-LLZO) is considered one of the most promising candidates to enable Li metal batteries due to its high ionic conductivity, chemical stability, and wide electrochemical stability window against Li metal. However, synthesis and processing of c-LLZO through conventional solid-sate reaction methods requires long periods of calcination (> 6 h) at high reaction temperatures (> 1000 °C). The need for high reaction temperature results to attain cubic-LLZO phase results in large aggerated LLZO particles and causes Li-loss from the garnet structure, making them unfavorable to process further as bulk pellets or thin films. To overcome processing challenges with solid-state reaction method, two novel facile synthesis approaches molten salt (flux growth method), and solution combustion are employed to produce submicron-sized LLZO powders at low reaction temperatures (< 1000 °C) in a short time. In the first case, molten salt synthesis method with LiCl-KCl eutectic mixture is employed to produce sub-micron sized Ta-doped LLZO (LLZTO) powders at low temperatures (900 °C, 4 h). In addition, a detailed investigation on effect of sintering medium and sintering additives on the structural, microstructural, chemical, and Li-ion transport behavior of the LLZTO pellets are investigated. Sintered LLZTO pellets prepared using molten salt synthesis route exhibited high Li-ion conductivity up to 0.6 mS cm-1 and high relative density (> 95 %) using Pt-crucible. In the second case, a facile solution-combustion technique using an amide-based fuel source CH6N4O is utilized to produce submicron-sized Al-doped LLZO (Al-LLZO) powders at low reaction temperatures 600-800 °C in a short duration of 4 h. In addition, effect of fuel to oxidizer ratio on phase purity, particle growth size, and formation mechanism of conductive Al-LLZO are reported and discussed. The Al-LLZO pellets sintered at 1100 °C/ 6 h exhibited high Li-ion conductivity up to 0.45 mS cm-1 with relative densities (> 90 %).
ContributorsBadami, Pavan Pramod (Author) / Kannan, Arunachalandar Mada (Thesis advisor) / Chan, Candace (Thesis advisor) / Song, Kenan (Committee member) / Arizona State University (Publisher)
Created2021
Description
Pelvic organ prolapse (POP) is a condition involving the weakening of the pelvic floor, with a prevalence of up to 50% of women experiencing the condition to some degree. Individuals with the condition are susceptible to multiple symptoms include vaginal protrusion, dyspareunia, and difficulties with waste excretion. Risk factors are common and numerous for POP, and the economic burden of the condition poses a significant cost to nations worldwide. For many years, the primary solution to POP was the usage of transvaginal meshes, often composed of polypropylene, but rising reports of harmful side effects have led to their recall. Due to this, the space is open for novel solutions, and treatments based in regenerative medicine are on the rise. One such potential treatment is the usage of functionalized polyvinyl alcohol scaffolds to support the regeneration and strengthening of the pelvic floor. To validate the usage of this scaffold, this study focuses on the biocompatibility of the scaffolds, with specific focus on the maintenance of cell viability and proliferation on the scaffold. Through usage of metabolic assays and fluorescence microscopy, scaffolds composed of functional polyvinyl alcohol with cellulose have shown promise in supporting the cell types necessary for reconstructing the pelvic floor.
ContributorsHaug, Joel (Author) / Song, Kenan (Thesis director) / Lancaster, Jessica (Committee member) / Barrett, The Honors College (Contributor) / Department of Psychology (Contributor) / Harrington Bioengineering Program (Contributor)
Created2023-05
Description
Pelvic organ prolapse (POP) is a condition involving the weakening of the pelvic floor, with a prevalence of up to 50% of women experiencing the condition to some degree. Individuals with the condition are susceptible to multiple symptoms include vaginal protrusion, dyspareunia, and difficulties with waste excretion. Risk factors are common and numerous for POP, and the economic burden of the condition poses a significant cost to nations worldwide. For many years, the primary solution to POP was the usage of transvaginal meshes, often composed of polypropylene, but rising reports of harmful side effects have led to their recall. Due to this, the space is open for novel solutions, and treatments based in regenerative medicine are on the rise. One such potential treatment is the usage of functionalized polyvinyl alcohol scaffolds to support the regeneration and strengthening of the pelvic floor. To validate the usage of this scaffold, this study focuses on the biocompatibility of the scaffolds, with specific focus on the maintenance of cell viability and proliferation on the scaffold. Through usage of metabolic assays and fluorescence microscopy, scaffolds composed of functional polyvinyl alcohol with cellulose have shown promise in supporting the cell types necessary for reconstructing the pelvic floor.
ContributorsHaug, Joel (Author) / Song, Kenan (Thesis director) / Lancaster, Jessica (Committee member) / Barrett, The Honors College (Contributor) / Department of Psychology (Contributor) / Harrington Bioengineering Program (Contributor)
Created2023-05
Description
Pelvic organ prolapse (POP) is a condition involving the weakening of the pelvic floor, with a prevalence of up to 50% of women experiencing the condition to some degree. Individuals with the condition are susceptible to multiple symptoms include vaginal protrusion, dyspareunia, and difficulties with waste excretion. Risk factors are common and numerous for POP, and the economic burden of the condition poses a significant cost to nations worldwide. For many years, the primary solution to POP was the usage of transvaginal meshes, often composed of polypropylene, but rising reports of harmful side effects have led to their recall. Due to this, the space is open for novel solutions, and treatments based in regenerative medicine are on the rise. One such potential treatment is the usage of functionalized polyvinyl alcohol scaffolds to support the regeneration and strengthening of the pelvic floor. To validate the usage of this scaffold, this study focuses on the biocompatibility of the scaffolds, with specific focus on the maintenance of cell viability and proliferation on the scaffold. Through usage of metabolic assays and fluorescence microscopy, scaffolds composed of functional polyvinyl alcohol with cellulose have shown promise in supporting the cell types necessary for reconstructing the pelvic floor.
ContributorsHaug, Joel (Author) / Song, Kenan (Thesis director) / Lancaster, Jessica (Committee member) / Barrett, The Honors College (Contributor) / Department of Psychology (Contributor) / Harrington Bioengineering Program (Contributor)
Created2023-05
Description
Nanoparticle (NP) assembly is critical where NPs are organized into complex superstructures through direct and indirect interactions. Long-range NP orders have nanoscale locational selectivity, orientational alignment, and scalable micropatterning, which are indispensable for enabling multiple functionalities and improving the performances of different systems. Though nanoparticles can self-assemble into organized nanostructures via simple drying thermodynamics, scalability has been a primary issue. Thus, this research focuses on more scalable manufacturing for directed NP assembly. First, 3D printing was used for template fabrications with varying topology features. Next, nanoparticle engineering with colloidal and surface studies leads to desirable NP packing on template surfaces. Finally, the processed devices will also demonstrate a few applications of surface micropatterning with nanoscale particle orders. Specifically, a few manufacturing procedures involve (i) stereolithography (SLA)/layer-by-layer dip coating, (ii) continuous liquid interface projection (CLIP)/ink writing, (iii) fused deposition melting (FDM)/direct ink writing, and (iv) multiphase direct ink writing (MDIW)/wet etching. To demonstrate the applicability of hybrid manufacturing, a broad range of nanoparticles, including carbon nanofibers (CNFs), MXene nanoflakes, and boron nitride nanoplatelets (BNNPs) were studied in this research. With well-managed template physics and NP dispersion control, nanoparticle orientational alignment and positional preferences are driven by short- and long-range intermolecular interactions (e.g., convective, van der Waals, capillarity, shear, and other secondary bonding). The printed devices displayed multifunctional properties, i.e., anisotropic conductivity, piezoresistive and chemical sensitivity, mechanical durability, and heat dissipation capabilities, for microelectronic applications. This fabrication technique shows enormous potential for rapid, scalable, and low-cost manufacturing of hierarchical structures, especially for micropatterning of nanoparticles not easily accessible through conventional processing methods.
ContributorsJambhulkar, Sayli (Author) / Song, Kenan (Thesis advisor) / Arizona State University (Publisher)
Created2023
Description
For the past two centuries, coal has played a vital role as the primary carbon source, fueling industries and enabling the production of essential carbon-rich materials, including carbon nanotubes, graphite, and diamond. However, the global transition towards sustainable energy production has resulted in a decline in coal usage for energy purposes, with the United States alone witnessing a substantial 50% reduction over the past decade. This shift aligns with the UN’s 2030 sustainability goals, which emphasize the reduction of greenhouse gas emissions and the promotion of cleaner energy sources. Despite the decreased use in energy production, the abundance of coal has sparked interest in exploring its potential for other sustainable and valuable applications.In this context, Direct Ink Writing (DIW) has emerged as a promising additive manufacturing technique that employs liquid or gel-like resins to construct three-dimensional structures. DIW offers a unique advantage by allowing the incorporation of particulate reinforcements, which enhance the properties and functionalities of the materials. This study focuses on evaluating the viability of coal as a sustainable and cost-effective substitute for other carbon-based reinforcements, such as graphite or carbon nanotubes. The research utilizes a thermosetting resin based on phenol-formaldehyde (commercially known as Bakelite) as the matrix, while pulverized coal (250 µm) and carbon black (CB) function as the reinforcements. The DIW ink is meticulously formulated to exhibit shear-thinning behavior, facilitating uniform and continuous printing of structures. Mechanical property testing of the printed structures was conducted following ASTM standards. Interestingly, the study reveals that incorporating a 2 wt% concentration of coal in the resin yields the most significant improvements in tensile modulus and flexural strength, with enhancements of 35% and 12.5% respectively. These findings underscore the promising potential of coal as a sustainable and environmentally friendly reinforcement material in additive manufacturing applications. By harnessing the unique properties of coal, this research opens new avenues for its utilization in the pursuit of greener and more efficient manufacturing processes.
ContributorsSundaravadivelan, Barath (Author) / Song, Kenan (Thesis advisor) / Marvi, Hamidreza (Committee member) / Zhuang, Houlong (Committee member) / Arizona State University (Publisher)
Created2023
Description
Progressive miniaturization in electronics demands advanced materials with excellent energy conversion and transport properties. Opportunities exist in novel material morphologies such as hierarchical structures, multi-functional composites and nanoscale architectures which may offer mechanical, thermal and electronic properties tailored to a wide range of applications (e.g., aerospace, robotics, biomedical etc.). However, the manufacturing capabilities have always posed a grand challenge in realizing the advanced material morphologies. Furthermore, the multi-scale modeling of complex material architectures has been extremely challenging owing to the limitations in computation methodologies and lack of understanding in nano-/micro-meter scale physics. To address these challenges, this work considers the morphology effect on carbon nanotube (CNT)-based composites, CNT fibers and thermoelectric (TE) materials. First, this work reports additively manufacturable TE morphologies and analyzes the thermo-electric transport behavior. This research introduces innovative honeycomb TE architectures that showed ~26% efficiency increase and ~25% density reduction compared to conventional rectangular TE architectures. Moreover, this work presents 3D printable compositionally segmented TE architecture which provides record-high efficiencies (up to 8.7%) over wide temperature ranges if the composition and aspect ratio of multiple TE materials are optimized within a single TE device. Next, this research proposes computationally efficient two-dimensional (2D) finite element model (FEM) to study the electrical and thermal properties in CNT based composites by simultaneously considering the stochastic CNT distributions, CNT fractions (upto 80%) and interfacial resistances. The FEM allows to estimate the theoretical maximum possible conductivities with corresponding interfacial resistances if the CNT morphologies are carefully controlled, along with appreciable insight into the energy transport physics. Then, this work proposes a data-driven surrogate model based on convolutional neural networks to rapidly approximate the composite conductivities in a second with accuracy > 98%, compared to FEM taking >100 minutes per simulation. Finally, this research presents a pseudo 2D FEM to approximate the electrical and thermal properties in CNT fibers at various CNT aspect ratios (up to 10,000) by simultaneously considering CNT-CNT interfacial effects along with the stochastic distribution of inter-bundle voids.
ContributorsEjaz, Faizan (Author) / Kwon, Beomjin (Thesis advisor) / Zhuang, Houlong (Committee member) / Song, Kenan (Committee member) / Wang, Robert (Committee member) / Kang, Wonmo (Committee member) / Arizona State University (Publisher)
Created2023