Matching Items (71)
Description
Standard procedures to estimate en-route aircraft performance rely upon the “standard atmosphere”. Real-world conditions are then represented as deviations from the standard atmosphere. Both flight manuals and aircraft designers make heavy use of the “deviation method” to account for geographical and temperature differences in atmospheric conditions. This method is often done statically, choosing a single deviation based on temperature and a single wind speed for the duration of an entire mission.
Real-world atmospheric conditions have an incredible amount of variation throughout any given flight route, however. Changes in geographic location can present many changes within the atmosphere; they include differences in air temperature, humidity, wind speeds, wind directions, air densities, and more. Historically, these changes have not been accounted for in standard mission performance models. However, they present major possible impacts on real missions.
This thesis addresses this issue by developing a lateral and vertical mission simulation method that uses real-world and up-to-date atmospheric conditions to determine the effect of changing atmospheric conditions on en-route performance and economy. The custom toolset was used in combination with a series of trades over a series of five days and a representation of each season to show the variation that occurs on a single route over the course of daily and seasonal periods.
Both qualitative and quantitative effects from this perspective were recorded for the Airbus A320 and a student designed regional jet, the Aeris, to determine the effect of atmospheric variation on standard commercial transport and hypothetical high-altitude capable commercial transport. The variance presented by changing atmospheric conditions is massive and has large implications on future aircraft operations and design.
Due to large geographical and temporal variation in the wind speeds and directions, it is recommended that aircraft operators use daily measurements of atmospheric conditions to determine optimal flight paths and altitudes. Further investigation is recommended in terms of the effect of changing atmosphere for design, however from initial investigations it appears that a statistical method works well for incorporating the large variance added by real-world conditions.
Real-world atmospheric conditions have an incredible amount of variation throughout any given flight route, however. Changes in geographic location can present many changes within the atmosphere; they include differences in air temperature, humidity, wind speeds, wind directions, air densities, and more. Historically, these changes have not been accounted for in standard mission performance models. However, they present major possible impacts on real missions.
This thesis addresses this issue by developing a lateral and vertical mission simulation method that uses real-world and up-to-date atmospheric conditions to determine the effect of changing atmospheric conditions on en-route performance and economy. The custom toolset was used in combination with a series of trades over a series of five days and a representation of each season to show the variation that occurs on a single route over the course of daily and seasonal periods.
Both qualitative and quantitative effects from this perspective were recorded for the Airbus A320 and a student designed regional jet, the Aeris, to determine the effect of atmospheric variation on standard commercial transport and hypothetical high-altitude capable commercial transport. The variance presented by changing atmospheric conditions is massive and has large implications on future aircraft operations and design.
Due to large geographical and temporal variation in the wind speeds and directions, it is recommended that aircraft operators use daily measurements of atmospheric conditions to determine optimal flight paths and altitudes. Further investigation is recommended in terms of the effect of changing atmosphere for design, however from initial investigations it appears that a statistical method works well for incorporating the large variance added by real-world conditions.
ContributorsThomaas, Philip (Author) / Takahashi, Timothy (Thesis advisor) / Niemczyk, Mary (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2019
Description
This work describes an approach for distance computation between agents in a
multi-agent swarm. Unlike other approaches, this work relies solely on signal Angleof-
Arrival (AoA) data and local trajectory data. Each agent in the swarm is able
to discretely determine distance and bearing to every other neighbor agent in the
swarm. From this information, I propose a lightweight method for sensor coverage
of an unknown area based on the work of Sameera Poduri. I also show that this
technique performs well with limited calibration distances.
multi-agent swarm. Unlike other approaches, this work relies solely on signal Angleof-
Arrival (AoA) data and local trajectory data. Each agent in the swarm is able
to discretely determine distance and bearing to every other neighbor agent in the
swarm. From this information, I propose a lightweight method for sensor coverage
of an unknown area based on the work of Sameera Poduri. I also show that this
technique performs well with limited calibration distances.
ContributorsMulford, Philip (Author) / Das, Jnaneshwar (Thesis advisor) / Takahashi, Timothy (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2020
Description
The process of designing any real world blunt leading-edge wing is tedious andinvolves hundreds, if not thousands, of design iterations to narrow down a single design.
Add in the complexities of supersonic flow and the challenge increases exponentially.
One possible, and often common, pathway for this design is to jump straight into detailed
volume grid computational fluid dynamics (CFD), in which the physics of supersonic
flow are modeled directly but at a high computational cost and thus an incredibly long
design process. Classical aerodynamics experts have published work describing a process
which can be followed which might bypass the need for detailed CFD altogether.
This work outlines how successfully a simple vortex lattice panel method CFDcode can be used in the design process for a Mach 1.3 cruise speed airline wing concept.
Specifically, the success of the wing design is measured in its ability to operate subcritically (i.e. free of shock waves) even in a free stream flow which is faster than the
speed of sound. By using a modified version of Simple Sweep Theory, design goals are
described almost entirely based on defined critical pressure coefficients and critical Mach
numbers. The marks of a well-designed wing are discussed in depth and how these traits
will naturally lend themselves to a well-suited supersonic wing.
Unfortunately, inconsistencies with the published work are revealed by detailedCFD validation runs to be extensive and large in magnitude. These inconsistencies likely
have roots in several concepts related to supersonic compressible flow which are
explored in detail. The conclusion is made that the theory referenced in this work by the
classical aerodynamicists is incorrect and/or incomplete. The true explanation for the
perplexing shock wave phenomenon observed certainly lies in some convolution of the
factors discussed in this thesis. Much work can still be performed in the way of creating
an empirical model for shock wave formation across a highly swept wing with blunt
leading-edge airfoils.
Add in the complexities of supersonic flow and the challenge increases exponentially.
One possible, and often common, pathway for this design is to jump straight into detailed
volume grid computational fluid dynamics (CFD), in which the physics of supersonic
flow are modeled directly but at a high computational cost and thus an incredibly long
design process. Classical aerodynamics experts have published work describing a process
which can be followed which might bypass the need for detailed CFD altogether.
This work outlines how successfully a simple vortex lattice panel method CFDcode can be used in the design process for a Mach 1.3 cruise speed airline wing concept.
Specifically, the success of the wing design is measured in its ability to operate subcritically (i.e. free of shock waves) even in a free stream flow which is faster than the
speed of sound. By using a modified version of Simple Sweep Theory, design goals are
described almost entirely based on defined critical pressure coefficients and critical Mach
numbers. The marks of a well-designed wing are discussed in depth and how these traits
will naturally lend themselves to a well-suited supersonic wing.
Unfortunately, inconsistencies with the published work are revealed by detailedCFD validation runs to be extensive and large in magnitude. These inconsistencies likely
have roots in several concepts related to supersonic compressible flow which are
explored in detail. The conclusion is made that the theory referenced in this work by the
classical aerodynamicists is incorrect and/or incomplete. The true explanation for the
perplexing shock wave phenomenon observed certainly lies in some convolution of the
factors discussed in this thesis. Much work can still be performed in the way of creating
an empirical model for shock wave formation across a highly swept wing with blunt
leading-edge airfoils.
ContributorsKurus, Noah John (Author) / Takahashi, Timothy (Thesis advisor) / Benson, David (Committee member) / Niemczyk, Mary (Committee member) / Arizona State University (Publisher)
Created2020
Description
This thesis aims to design of wings for a laminate biped robot for providing locomotion stabilization during jump gliding. The wings are designed to collapse down during the jumping phase to maximize jump height and deployed back for gliding phase using anisotropic buckling in tape spring hinges. The project aims to develop a reliable dynamics model which can be utilized for design and evaluation of optimized systems for jump-gliding. The aerodynamic simulations are run on a vortex-lattice code which provides numeric simulations of the defined geometric bodies. The aerodynamic simulations assist in improving the design parameters such as planform, camber and twist to achieve the best possible Coefficient of Lift for maximizing glide distance. The aerodynamic simulation output is then plugged into a dynamics model built in Python, which is validated and correlated with experimental testing of a key wing designs. The experimental results are then utilized to improve the dynamics model and obtain better designs for improved performance. The simulation model informs the aerodynamic design of wings for sustaining glide for the biped platform and maximizing glide length to increase range.
ContributorsGadekar, Vipul (Author) / Takahashi, Timothy (Thesis advisor) / Aukes, Daniel (Thesis advisor) / Marvi, Hamidreza (Committee member) / Arizona State University (Publisher)
Created2020
Description
Learning loss occurs during academic breaks, and this can be detrimental to student success especially in sequential classes like Arizona State University’s Engineering Calculus sequence in which retention of the topics taught in a prior class is expected. The Keeping in School Shape Program (KiSS) is designed as a cost effective, efficient, and accessible way of addressing this problem. The KiSS program uses push technology to give students a way to regularly review material over academic breaks while also fostering a growth mindset.Every day, during an academic break, students are sent a link via text message or email to access a multiple-choice daily review problem which represents material from a previous course that is requisite for success in an upcoming course. Before solving the daily problem, students use a 5-point scale to indicate how confident they are that they can solve the problem. Students then complete the daily review problem and have a variety of resources to support them as they do so, as well as options after they complete it. Students are able to view a hint and try a problem again, view a solution, and attempt a challenge problem. On Tuesdays (aka 2’s-Days) students are given the opportunity to complete either an additional daily review problem or an additional challenge problem, and on Sundays (aka Trivia Days) students can decide between completing only a mathematics trivia question or trivia along with the daily review problem.
There is much to be learned from each individual student who participates in the KiSS program. Three surveys were conducted during the Winter Break 2020 KiSS program that gave insight into students’ experience in the KiSS program along with their personal background and mindset regarding mathematics. Ten students responded to all three of these surveys. This thesis will present a case study for each of these ten students based on their data from program participation and survey responses. Conclusions will be drawn regarding ways in which the KiSS program is helping students and ways in which it can be improved to help students be better prepared for their upcoming studies.
ContributorsVandenberg, Jana Elle (Author) / Van de Sande, Carla (Thesis advisor) / Jones, Donald (Committee member) / Milner, Fabio (Committee member) / Verdín, Dina (Committee member) / Arizona State University (Publisher)
Created2021
Description
Automation has become a staple in high volume manufacturing, where the consistency and quality of a product carries as much importance as the quantity produced. The Aerospace Industry has a vested interest in expanding the application of automation beyond simply manufacturing. In this project, the process of systems engineering has been applied to the Conceptual Design Phase of product development; specifically, the Preliminary Structural Design of a Composite wing for an Unmanned Air Vehicle (UAV). Automated structural analysis can be used to develop a composite wing structure that can be directly rendered in Computer Aided Drafting (CAD) and validated using Finite Element Analysis (FEA). This concept provides the user with the ability to quickly iterate designs and demonstrates how different the “optimal light weight” composite structure must look for UAV systems of varied weight, range, and flight maneuverability.
ContributorsBlair, Martin Caceres (Author) / Takahashi, Timothy (Thesis advisor) / Murthy, Raghavendra (Committee member) / Perez, Ruben (Committee member) / Arizona State University (Publisher)
Created2021
Description
Multiphase flows are relevant to various industrial processes and are also a ubiquitous feature of nature. Atomization is a Gas-Liquid class of multiphase flow in which the liquid bulk disintegrates into a spectrum of drops. The final drop size distribution of fragmenting liquids is important and is crucial to quantifying the performance of atomizers. This thesis implements two models of ligament breakup. The first model provides a method to determine the droplet size distribution of fragmenting ligaments. The second model provides a relation between ligament stretching, aspect ratio and dimensionless properties like Ohnesorge and Weber numbers for ligaments being stretched by aerodynamic force. The first model by Villermaux et.al considers a ligament as a linear succession of liquid blobs which undergo continuous interplay during destabilization. The evolution of their size distribution ultimately rules the droplet size distribution which follow a gamma distribution [14]. The results show that the Direct Numerical Simulations (DNS) of ligaments with different perturbations fragmented into very few drops and cannot be used to confirm that they follow the predicted gamma distribution. The second model considers a ligament breakup due to Rayleigh-Plateau Instability and provides an equation for ligament stretching. Through test runs the proportionality constant in the equation is determined by a least square fit. The theoretical number of drops is compared with the number of drops resulting from the Direct Numerical Simulation of ligament with a sinusoidal perturbation. It is found that the wavelength of the initial perturbation does not determine the number of drops obtained by ligament breakup
ContributorsRama Krishna, Prathyush (Author) / Herrmann, Marcus (Thesis advisor) / Takahashi, Timothy (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2021
Description
In a society that is becoming more technologically driven, it is important to have people to design, test, and build new things in order for society to progress. This is oftentimes the role of an engineer. However, engineering school is not easy, and engineering students don’t always make it all the way through school to get an engineering job. This thesis is an in-depth analysis of an engineering student’s path - from choosing engineering as a major to ultimately transitioning into a full-time engineering job. It will do this by covering (1) what engineering is and what career opportunities exist within the discipline, (2) common pitfalls that students may encounter while going through engineering school, (3) how to get an engineering job in industry, and (4) how to appropriately transition into an industry job using the skills from engineering school. While talking about what engineering is and what career opportunities exist, this thesis will discuss engineering as a profession, the ABET accreditation board, and careers in industry vs academia. As part of common pitfalls that engineering students face, this thesis will discuss tenure track, theory vs reality, cooperative learning, and misconceptions about engineering. In order to talk about how to get an industry job, this thesis will discuss the impact of grades, relevant experience, communication, personal branding, and industry options. Finally, while talking about effectively transitioning into industry, this thesis will discuss understanding the skills gained from engineering school, the different roles in industry, and how to appropriately apply those skills. Ultimately this thesis aims to be a resource for students interested in engineering so that they can understand how to successfully make it through school and move into the work force effectively.
ContributorsJordan, Arminta Claire (Author) / Takahashi, Timothy (Thesis director) / Zhu, Haolin (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
An experimental investigation was conducted to calculate the aerodynamic drag on a cyclist wearing different types of clothing. The different outfits worn for this experiment were a professional skinsuit, a professional cycling kit, a t-shirt and shorts, and a long-sleeved flannel and jeans. The aerodynamic drag was ultimately found using the coast down method, a process in which a cyclist increases their speed to a chosen maximum threshold, and upon reaching this speed, ceases the pedal stroke and maintains the aero position until the bicycle comes to a stop. The data was gathered using an AeroPod, speed sensor, and GPS unit. The data gathered was imported into Excel for data analysis. The average CdA values at race speed (26-30 ft/s) for the skinsuit, cycling kit, t-shirt and shorts, and flannel were calculated to be 4.180 ft2, 3.668 ft2, 4.884 ft2, and 4.223 ft2, respectively. These race speed averages were found using data from three separate Ironman Triathlons. The cycling kit was found to be the most aerodynamic at the race speed. The results of this study reveal that cycling apparel can only be optimized for a small range of speeds and cycling outside of this optimal range delays the initiation of the reduction of boundary layer separation, thus resulting in more critical time spent in the flow transition region. The skinsuit’s performance was more aerodynamically efficient than the cycling kit at speeds greater than 36.8 mph. The cycling kit is more aerodynamic for speeds slower than 36.8 mph. The slickness of the skinsuit was found to be detrimental to the cyclist’s aerodynamic drag, as the lack of roughness on the skinsuit prevented the initiation of turbulent flow, which results in a decrease in drag. Overall, the experiment confirmed the hypothesis that a cyclist is more aerodynamic when wearing cycling apparel as opposed to casual, loose-fitting clothing.
ContributorsGlynn, Julia Daniel (Co-author) / Duffy, Kyle (Co-author) / Takahashi, Timothy (Thesis director) / Bergmann, Ande (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Department of Information Systems (Contributor) / Barrett, The Honors College (Contributor)
Created2019-12
Description
This paper describes the development of a software tool used to automate the preliminary design of aircraft wing structure. By taking wing planform and aircraft weight as inputs, the tool is able to predict loads that will be experienced by the wing. An iterative process is then used to select optimal material thicknesses for each section of the design to minimize total structural weight. The load analysis checks for tensile failure as well as Euler buckling when considering if a given wing structure is valid. After running a variety of test cases with the tool it was found that wing structure of small-scale aircraft is predominantly buckling driven. This is problematic because commonly used weight estimation equations are based on large scale aircraft with strength driven wing designs. Thus, if these equations are applied to smaller aircraft, resulting weight estimates are often much lower than reality. The use of a physics-based approach to preliminary sizing could greatly improve the accuracy of weight predictions and accelerate the design process.
ContributorsKolesov, Nikolay (Author) / Takahashi, Timothy (Thesis director) / Patel, Jay (Committee member) / Kosaraju, Srinivas (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-12