Matching Items (33)
Community-based development: scaling up the correct use of misoprostol at home births in Afghanistan
Description
Globally, more than 350 000 women die annually from complications during pregnancy and childbirth (UNFPA, 2011). Nearly 99% of these, according to World Health Organization (WHO) trends (2010) occur in the developing world outside of a hospital setting with limited resources including emergency care (WHO, 2012; UNFPA, 2011). The most prevalent cause of death is postpartum hemorrhage (PPH), accounting for 25% of deaths according to WHO statistics (2012). Conditions in Afghanistan are reflective of the scope and magnitude of the problem. In Afghanistan, maternal mortality is thought to be among the highest in the world. The Afghan Mortality Survey (AMS) data implies that one Afghan woman dies about every 2 hours from pregnancy-related causes (AMS, 2010). Lack of empowerment, education and access to health care resources increase a woman's risk of dying during pregnancy (AMS, 2010). This project aims to investigate the prospects of scaling-up the correct use of misoprostol, a prostaglandin E1 analogue, to treat PPH in developing countries where skilled assistance and resources are scant. As there has been little published on the lessons learned from programs already in place, this study is experience-driven, based on the knowledge of industry experts. This study employs a concurrent triangulation approach to synthesize quantitative data obtained from previous studies with qualitative information gathered through the testimonies of key personnel who participated in pilot programs involving misoprostol. There are many obstacles to scaling-up training initiatives in Afghanistan and other low-resource areas. The analysis concludes that the most crucial factors for scaling-up community-based programs include: more studies analyzing lessons learns from community driven approaches; stronger partnerships with community health care workers; overcoming barriers like association with abortion, misuse and product issues; and a heightened global and community awareness of the severity of PPH without treatment. These results have implications for those who actively work in Afghanistan to promote maternal health and other countries that may use Afghanistan's work as a blueprint for reducing maternal mortality through community-based approaches. Keywords: Afghanistan, community-based interventions, community-driven, maternal mortality, MDG5, misoprostol, postpartum hemorrhage, reproduction, scale-up
ContributorsCristy, Candice (Author) / Grossman, Gary (Thesis advisor) / Parmentier, Mary-Jane (Committee member) / Byrd, Denise (Committee member) / Arizona State University (Publisher)
Created2013
Description
Photovoltaic (PV) module nameplates typically provide the module's electrical characteristics at standard test conditions (STC). The STC conditions are: irradiance of 1000 W/m2, cell temperature of 25oC and sunlight spectrum at air mass 1.5. However, modules in the field experience a wide range of environmental conditions which affect their electrical characteristics and render the nameplate data insufficient in determining a module's overall, actual field performance. To make sound technical and financial decisions, designers and investors need additional performance data to determine the energy produced by modules operating under various field conditions. The angle of incidence (AOI) of sunlight on PV modules is one of the major parameters which dictate the amount of light reaching the solar cells. The experiment was carried out at the Arizona State University- Photovoltaic Reliability Laboratory (ASU-PRL). The data obtained was processed in accordance with the IEC 61853-2 model to obtain relative optical response of the modules (response which does not include the cosine effect). The results were then compared with theoretical models for air-glass interface and also with the empirical model developed by Sandia National Laboratories. The results showed that all modules with glass as the superstrate had identical optical response and were in agreement with both the IEC 61853-2 model and other theoretical and empirical models. The performance degradation of module over years of exposure in the field is dependent upon factors such as environmental conditions, system configuration, etc. Analyzing the degradation of power and other related performance parameters over time will provide vital information regarding possible degradation rates and mechanisms of the modules. An extensive study was conducted by previous ASU-PRL students on approximately 1700 modules which have over 13 years of hot- dry climatic field condition. An analysis of the results obtained in previous ASU-PRL studies show that the major degradation in crystalline silicon modules having glass/polymer construction is encapsulant discoloration (causing short circuit current drop) and solder bond degradation (causing fill factor drop due to series resistance increase). The power degradation for crystalline silicon modules having glass/glass construction was primarily attributed to encapsulant delamination (causing open-circuit voltage drop).
ContributorsVasantha Janakeeraman, Suryanarayana (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Rogers, Bradley (Committee member) / Macia, Narciso (Committee member) / Arizona State University (Publisher)
Created2013
Descriptionnone
ContributorsZamil, Ruaa (Author) / Parmentier, Mary J (Thesis advisor) / Chhetri, Nalini (Committee member) / Grossman, Gary (Committee member) / Arizona State University (Publisher)
Created2013
Description
An issue with the utilization of swimming pools is that pumps are operated an excessive number of hours to keep the pool free of debris and algae. Case in point, according to the pool industry, a pump should operate one hour for every ten degrees of ambient temperature. A dynamic model and a control strategy have been developed using Matlab/Simulink that uses environmental conditions together with chemicals that hinder or aid algae growth in order to determine algae population. This model suggests ways to function the pump on shorter time intervals to reduce energy consumption, while simultaneously maintaining algae populations at acceptable levels. Other factors included in the model are pool thermal dynamics and pool pump/filter performance characteristics, since they also have an effect algae growth. This thesis presents the first step for an alternative way of operating a swimming pool by minimizing operating costs while eliminating algae.
ContributorsBallard, Roderick (Author) / Macia, Narciso (Thesis advisor) / Narveson, Brentt (Committee member) / Mchenry, Albert (Committee member) / Dempster, Thomas (Committee member) / Arizona State University (Publisher)
Created2012
Description
Microgrids are a subset of the modern power structure; using distributed generation (DG) to supply power to communities rather than vast regions. The reduced scale mitigates loss allowing the power produced to do more with better control, giving greater security, reliability, and design flexibility. This paper explores the performance and cost viability of a hybrid grid-tied microgrid that utilizes Photovoltaic (PV), batteries, and fuel cell (FC) technology. The concept proposes that each community home is equipped with more PV than is required for normal operation. As the homes are part of a microgrid, excess or unused energy from one home is collected for use elsewhere within the microgrid footprint. The surplus power that would have been discarded becomes a community asset, and is used to run intermittent services. In this paper, the modeled community does not have parking adjacent to each home allowing for the installment of a privately owned slower Level 2 charger, making EV ownership option untenable. A solution is to provide a Level 3 DC Quick Charger (DCQC) as the intermittent service. The addition of batteries and Fuel Cells are meant to increase load leveling, reliability, and instill limited island capability.
ContributorsPatterson, Maxx (Author) / Madakannan, Arunachalanadar (Thesis advisor) / Macia, Narciso (Committee member) / Peng, Xihong (Committee member) / Arizona State University (Publisher)
Created2013
Description
This is a two-part thesis: Part 1 of this thesis tests and validates the methodology and mathematical models of the International Electrotechnical Commission (IEC) 61853-2 standard for the measurement of angle of incidence (AOI) effects on photovoltaic modules. Flat-plate photovoltaic modules in the field operate under a wide range of environmental conditions. The purpose of IEC 61853-2 is to characterize photovoltaic modules' performance under specific environmental conditions. Part 1 of this report focuses specifically on AOI. To accurately test and validate IEC 61853-2 standard for measuring AOI, meticulous experimental setup and test procedures were followed. Modules of five different photovoltaic technology types with glass superstrates were tested. Test results show practically identical relative light transmission plots for all five test modules. The experimental results were compared to theoretical and empirical models for relative light transmission of air-glass interface. IEC 61853-2 states "for the flat glass superstrate modules, the AOI test does not need to be performed; rather, the data of a flat glass air interface can be used." The results obtained in this thesis validate this statement. This work was performed in collaboration with another Master of Science student (Surynarayana Janakeeraman) and the test results are presented in two masters theses. Part 2 of this thesis is to develop non-intrusive techniques to accurately measure the quantum efficiency (QE) of a single-junction crystalline silicon cell within a commercial module. This thesis will describe in detail all the equipment and conditions necessary to measure QE and discuss the factors which may influence this measurement. The ability to utilize a non-intrusive test to measure quantum efficiency of a cell within a module is extremely beneficial for reliability testing of commercial modules. Detailed methodologies for this innovative test procedure are not widely available in industry because equipment and measurement techniques have not been explored extensively. This paper will provide a literature review describing relevant theories and measurement techniques related to measuring the QE of a cell within a module. The testing methodology and necessary equipment will be described in detail. Results and conclusions provide the overall accuracy of the measurements and discuss the parameters affecting these measurements.
ContributorsKnisely, Brett (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Rogers, Bradley (Committee member) / Macia, Narciso (Committee member) / Arizona State University (Publisher)
Created2013
Description
Flow measurement has always been one of the most critical processes in many industrial and clinical applications. The dynamic behavior of flow helps to define the state of a process. An industrial example would be that in an aircraft, where the rate of airflow passing the aircraft is used to determine the speed of the plane. A clinical example would be that the flow of a patient's breath which could help determine the state of the patient's lungs. This project is focused on the flow-meter that are used for airflow measurement in human lungs. In order to do these measurements, resistive-type flow-meters are commonly used in respiratory measurement systems. This method consists of passing the respiratory flow through a fluid resistive component, while measuring the resulting pressure drop, which is linearly related to volumetric flow rate. These types of flow-meters typically have a low frequency response but are adequate for most applications, including spirometry and respiration monitoring. In the case of lung parameter estimation methods, such as the Quick Obstruction Method, it becomes important to have a higher frequency response in the flow-meter so that the high frequency components in the flow are measurable. The following three types of flow-meters were: a. Capillary type b. Screen Pneumotach type c. Square Edge orifice type To measure the frequency response, a sinusoidal flow is generated with a small speaker and passed through the flow-meter that is connected to a large, rigid container. True flow is proportional to the derivative of the pressure inside the container. True flow is then compared with the measured flow, which is proportional to the pressure drop across the flow-meter. In order to do the characterization, two LabVIEW data acquisition programs have been developed, one for transducer calibration, and another one that records flow and pressure data for frequency response testing of the flow-meter. In addition, a model that explains the behavior exhibited by the flow-meter has been proposed and simulated. This model contains a fluid resistor and inductor in series. The final step in this project was to approximate the frequency response data to the developed model expressed as a transfer function.
ContributorsHu, Jianchen (Author) / Macia, Narciso (Thesis advisor) / Pollat, Scott (Committee member) / Rogers, Bradley (Committee member) / Arizona State University (Publisher)
Created2013
Evaluation of sustainability in development projects utilizing renewable energy products in Zimbabwe
Description
The problem concerning the access to energy has become an increasingly acute matter of concern in low-income areas. Currently an estimated 1.2 billion people don't have access to energy (IEA, 2014). Following the declaration of 2012 as "The International Year of Sustainable Energy for All" by the United Nations General Assembly (UNDP, 2014), this alarming situation of energy poverty has resulted in the creation of new partnerships between governments, NGOs (Non-Governmental Organization), and large multi-national corporations.
This study is focused on the evaluation of sustainability of a development project in Gutu, Zimbabwe that is initiated by Schneider Electric Corporation's BipBop Program. This program aims to provide access to energy via photo-voltaic cells and battery kits for daily use. It is expected that this project will have a high impact on sustainable development, and creation of value, which in turn is expected to allow participation in global supply chains.
The results gathered from the analysis show that the development project to be piloted in Gutu, Zimbabwe is likely to have a "high impact on sustainability". The project is therefore considered an effective sustainable development project that aims to promote, and develop local Zimbabwean markets through increased transactions and the creation of sustainable supply chains that are expected to recruit Zimbabwe into the global value chains.
This study is focused on the evaluation of sustainability of a development project in Gutu, Zimbabwe that is initiated by Schneider Electric Corporation's BipBop Program. This program aims to provide access to energy via photo-voltaic cells and battery kits for daily use. It is expected that this project will have a high impact on sustainable development, and creation of value, which in turn is expected to allow participation in global supply chains.
The results gathered from the analysis show that the development project to be piloted in Gutu, Zimbabwe is likely to have a "high impact on sustainability". The project is therefore considered an effective sustainable development project that aims to promote, and develop local Zimbabwean markets through increased transactions and the creation of sustainable supply chains that are expected to recruit Zimbabwe into the global value chains.
ContributorsDemirciler, Barlas (Author) / Parmentier, Mary Jane (Thesis advisor) / Grossman, Gary (Committee member) / Maltz, Arnold (Committee member) / Arizona State University (Publisher)
Created2014
Description
It is estimated there are tens of millions of street children throughout the world. Existing literature has identified the conditions street children live in; and additional research has shown how these conditions typically affect the self-esteem of children. There is also ample research to support self-esteem as a critical component to a healthy childhood development. Existing research suggests that street children should have a low self-esteem, however data has not yet been collected to examine if this is true. Existing literature has also not yet explored how the self-esteem of street children is a necessary component to economic development. Based on Amartaya Sen's development theory of capabilities, damaged self-esteem in street children could be considered a hindrance to development.
This paper will examine how the self-esteem of street children is important to overall economic development. To understand if the self-esteem of street children are affected how existing literature suggests, this research examines the self-esteem of street children (n=22) in the Philippines using the Culture Free Self-Esteem Inventories 3 tool, which quantifies self-esteem levels with the Global Self-Esteem Quotient (GSEQ). In comparison to the GSEQ standardized scale, almost all street children surveyed scored below average or lower. The mean GSEQ score for the street children in Manila was below average.
This paper will examine how the self-esteem of street children is important to overall economic development. To understand if the self-esteem of street children are affected how existing literature suggests, this research examines the self-esteem of street children (n=22) in the Philippines using the Culture Free Self-Esteem Inventories 3 tool, which quantifies self-esteem levels with the Global Self-Esteem Quotient (GSEQ). In comparison to the GSEQ standardized scale, almost all street children surveyed scored below average or lower. The mean GSEQ score for the street children in Manila was below average.
ContributorsWolfe, Alyssa (Author) / Grossman, Gary (Committee member) / Parmentier, Mary Jane (Committee member) / Wang, Lili (Committee member) / Arizona State University (Publisher)
Created2015
Description
This study evaluates the potential profitability and environmental benefit available by providing renewable energy from solar- or wind-generated sources to electric vehicle drivers at public charging stations, also known as electric vehicle service equipment (EVSE), in the U.S. Past studies have shown above-average interest in renewable energy by drivers of plug-in electric vehicles (PEVs), though no study has evaluated the profitability and environmental benefit of selling renewable energy to PEV drivers at public EVSE. Through an online survey of 203 U.S.-wide PEV owners and lessees, information was collected on (1) current PEV and EVSE usage, (2) potential willingness to pay (WTP) for upgrading their charge event to renewable energy, and (3) usage of public EVSE if renewable energy was offered. The choice experiment survey method was used to avoid bias known to occur when directly asking for WTP. Sixty percent of the participants purchased their PEVs due to environmental concerns. The survey results indicate a 506% increase in the usage of public pay-per-use EVSE if renewable energy was offered and a mean WTP to upgrade to renewable energy of $0.61 per hour for alternating current (AC) Level 2 EVSE and $1.82 for Direct Current (DC) Fast Chargers (DCFC). Based on data from the 2013 second quarter (2Q) report of The EV Project, which uses the Blink public EVSE network, this usage translates directly to an annual gross income increase of 668% from the original $1.45 million to $11.1 million. Blink would see an annual cost of $16,005 per year for the acquisition of the required renewable energy as renewable energy credits (RECs). Excluding any profit seen purely from the raise in usage, $3.8 million in profits would be gained directly from the sale of renewable energy. Relative to a gasoline-powered internal combustion engine passenger vehicle, greenhouse gas (GHG) emissions are 42% less for the U.S. average blend grid electricity-powered electric vehicle and 99.997% less when wind energy is used. Powering all Blink network charge events with wind energy would reduce the annualized 2Q 2013 GHG emissions of 1,589 metric tons CO2 / yr to 125 kg CO2 / yr, which is the equivalent of removing 334 average U.S. gasoline passenger cars from the road. At the increased usage, 8,031 metric tons CO2 / yr would be prevented per year or the equivalent of the elimination of 1,691 average U.S. passenger cars. These economic and environmental benefits will increase as PEV ownership increases over time.
ContributorsNienhueser, Ian Andrew (Author) / Qiu, Yueming (Thesis advisor) / Rogers, Bradley (Thesis advisor) / Macia, Narciso (Committee member) / Arizona State University (Publisher)
Created2014