Matching Items (306)
131521-Thumbnail Image.png
Description
Turbidity is a known problem for UV water treatment systems as suspended particles can shield contaminants from the UV radiation. UV systems that utilize a reflective radiation chamber may be able to decrease the impact of turbidity on the efficacy of the system. The purpose of this study was to

Turbidity is a known problem for UV water treatment systems as suspended particles can shield contaminants from the UV radiation. UV systems that utilize a reflective radiation chamber may be able to decrease the impact of turbidity on the efficacy of the system. The purpose of this study was to determine how kaolin clay and gram flour turbidity affects inactivation of Escherichia coli (E. coli) when using a UV system with a reflective chamber. Both sources of turbidity were shown to reduce the inactivation of E. coli with increasing concentrations. Overall, it was shown that increasing kaolin clay turbidity had a consistent effect on reducing UV inactivation across UV doses. Log inactivation was reduced by 1.48 log for the low UV dose and it was reduced by at least 1.31 log for the low UV dose. Gram flour had a similar effect to the clay at the lower UV dose, reducing log inactivation by 1.58 log. At the high UV dose, there was no change in UV inactivation with an increase in turbidity. In conclusion, turbidity has a significant impact on the efficacy of UV disinfection. Therefore, removing turbidity from water is an essential process to enhance UV efficiency for the disinfection of microbial pathogens.
ContributorsMalladi, Rohith (Author) / Abbaszadegan, Morteza (Thesis director) / Alum, Absar (Committee member) / Fox, Peter (Committee member) / School of Human Evolution & Social Change (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
131530-Thumbnail Image.png
Description
Accurately predicting local ranges of isotopic signatures in human populations is essential for answering questions about past migrations and mobility. While local ranges of δ18O can be estimated using modern baseline samples and precipitation models, there are many environmental and anthropogenic drivers that can cause these ranges to deviate

Accurately predicting local ranges of isotopic signatures in human populations is essential for answering questions about past migrations and mobility. While local ranges of δ18O can be estimated using modern baseline samples and precipitation models, there are many environmental and anthropogenic drivers that can cause these ranges to deviate from the ranges seen in human populations. This study performs a geostatistical meta-analysis on a large dataset (n = 1,370) of spatially contextualized archaeological δ18O samples from 30 publications in order to generate a predictive model of local human δ18O ranges in the Central Andes. Two models were generated, one using archaeological samples of both humans and fauna, and the other using only humans. The model using only human samples makes more accurate predictions, cautioning against the incorporation of faunal δ18O samples in studies of human provenance. The models are also compared against a model of δ18O values found in precipitation across the study area, and significant differences lead to the conclusion that precipitation models are insufficient for predicting local human δ18O ranges.
ContributorsHatley, Camden Miller (Author) / Knudson, Kelly (Thesis director) / Scaffidi, Beth (Committee member) / School of Earth and Space Exploration (Contributor) / School of Human Evolution & Social Change (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
131531-Thumbnail Image.png
Description
This study evaluates medical pluralism among 1.5 generation Indian American immigrants. 1.5 generation Indian Americans (N=16) were surveyed regarding their engagement in complementary and alternative medical systems (CAM), how immigration affected that, and reasons for and for not continuing the use of CAM. Results indicated most 1.5 Indian immigrants currently

This study evaluates medical pluralism among 1.5 generation Indian American immigrants. 1.5 generation Indian Americans (N=16) were surveyed regarding their engagement in complementary and alternative medical systems (CAM), how immigration affected that, and reasons for and for not continuing the use of CAM. Results indicated most 1.5 Indian immigrants currently engage in CAM, given that their parents also engage in CAM. The top reasons respondents indicated continued engagement in CAM was that it has no side effects and is preventative. Reasons for not practicing CAM included feeling out of place, not living with parents or not believing in CAM. After immigration, most participants decreased or stopped their engagement in CAM. More women than men continued to practice CAM after immigration. From the results, it was concluded that CAM is still important to 1.5 generation Indian immigrants.
ContributorsMurugesh, Subhiksha (Author) / Stotts, Rhian (Thesis director) / Mubayi, Anuj (Committee member) / School of Human Evolution & Social Change (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
135188-Thumbnail Image.png
Description
Space microbiology, or the study of microorganisms in space, has significant applications for both human spaceflight and Earth-based medicine. This thesis traces the evolution of the field of space microbiology since its creation in 1935. Beginning with simple studies to determine if terrestrial life could survive spaceflight, the field of

Space microbiology, or the study of microorganisms in space, has significant applications for both human spaceflight and Earth-based medicine. This thesis traces the evolution of the field of space microbiology since its creation in 1935. Beginning with simple studies to determine if terrestrial life could survive spaceflight, the field of space microbiology has grown to encompass a substantial body of work that is now recognized as an essential component of NASA' research endeavors. Part one provides an overview of the early period of space microbiology, from high-altitude balloon and rocket studies to work conducted during the Apollo program. Part two summarizes the current state of the field, with a specific focus on the revolutionary contributions made by the Nickerson lab at the Biodesign Institute at ASU using the NASA-designed Rotating Wall Vessel (RWV) Bioreactor. Finally, part three highlights the research I've conducted in the Nickerson lab, as well as continuing studies within the field of space microbiology.
ContributorsMcCarthy, Breanne E. (Author) / Lynch, John (Thesis director) / Foy, Joseph (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
134291-Thumbnail Image.png
Description
Orbiting space debris is an active issue that affects the capability of space launch for future satellites, probes, and space shuttles, and it will become a nearly insurmountable problem without action. Debris of varying sizes and speeds orbit the Earth at a range of heights above the atmosphere and need

Orbiting space debris is an active issue that affects the capability of space launch for future satellites, probes, and space shuttles, and it will become a nearly insurmountable problem without action. Debris of varying sizes and speeds orbit the Earth at a range of heights above the atmosphere and need to be removed to avoid damage to crucial equipment of active orbiting satellites including the International Space Station. Finding a feasible solution to space debris removal requires that several facets be covered to become a reality; these include being aware of the problem in magnitude and source. This literature assessment covers the magnitude of space debris in low-earth and geosynchronous orbit as well as collision events which have increased the amount of space debris. There have been efforts made by several space agencies to control the amount of space debris added to orbit by current and future launches over the last decade \u2014 serving as a temporary fix before removal can be executed. This paper explores known removal efforts through mitigation, projects conceived and tested by DARPA, related space policies and laws, CubeSat technology, and the cataloguing of known space debris. To make space debris removal a reality, roadblocks need to be removed to acquire permission from states or countries for space missions. For example, these restrictions are in place to protect the assets of several countries and organizations. Guidelines set to curb the growth of space debris fail to prevent the growth due to the restrictions for ownership rights making them not as effective. This paper covers space policy and laws, the economy, satellite ownership, international conflict, status of space debris, and the overall feasibility of space debris removal. It will then discuss currently proposed solutions for the removal of space debris. Finally, this paper attempts to weight the advantages and disadvantages of the idea that space debris removal should include the opportunity to recycle materials. For example, defunct satellites and other discarded space crafts could be used for future launches. It will conclude with a personal exploration of what materials can be recycled, what chemical processes can be used to break down materials, and how to combine recycling and chemical processes for space-based recycling stations between Earth and the moon. The overall question that drives the search for making space debris removal a reality is whether it is feasible in multiple areas including technologically, legally, monetarily, and physically.
ContributorsBreden, Elizabeth Catherine (Author) / Foy, Joseph (Thesis director) / Thoesen, Andrew (Committee member) / Maximon, Leonard (Committee member) / School of Molecular Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
135365-Thumbnail Image.png
Description
This study focused on the connection between the EnvZ/OmpR two-component regulatory system and the iron homeostasis system in Escherichia coli, specifically how a mutant form of EnvZ11/OmpR is able to reduce the expression of fepA::lacZ, a reporter gene fusion in E. coli. FepA is one of several outer membrane siderophore

This study focused on the connection between the EnvZ/OmpR two-component regulatory system and the iron homeostasis system in Escherichia coli, specifically how a mutant form of EnvZ11/OmpR is able to reduce the expression of fepA::lacZ, a reporter gene fusion in E. coli. FepA is one of several outer membrane siderophore receptors that allow extracellular siderophores bound to iron to enter the cells to power various biological processes. Previous studies have shown that in E. coli cells that expressed a mutant allele of envZ, called envZ11, which led to altered expression of various iron genes including down regulation of fepA::lacZ. The wild type EnvZ/OmpR system is not considered to regulate iron genes, but because these envz11 strains had downregulated fepA::lacZ, this study was undertaken to understand the connection and mechanisms of this downregulation. A large number of Lac+ revertants were obtained from the B32-2483 strain (envz11 and fepA::lacZ) and 7 Lac+ revertants that had reversion mutations not directly correcting the envZ11 allele were further characterized. With P1 phage transduction genetic mapping that involved moving a kanamycin resistance marker linked to fepA::lacZ, two Lac+ revertants were found to have their reversion mutations in the fepA promoter region, while the other five revertants had their mutations mapping outside the fepA region. These two revertants underwent DNA sequencing and found to carry two different single base pair mutations in two different locations of the fepA promoter region. Each one is in the Fur repressor binding region, but one also may have affected the Shine-Dalgarno region involved in translation initiation. All 7 reveratants underwent beta-galactosidase assays to measure fepA::lacZ expression. The two revertants that had mutations in the fepA promoter region had significantly increased fepA activity, with the revertant with the Shine-Dalgarno mutation having the most elevated fepA expression. The other 5 revertants that did not map in the fepA region had fepA expression elevated to the same level as that found in the wild type EnvZ/OmpR background. The data suggest that the negative effect of envZ11 can be overcome by multiple mechanisms, including directly correcting the envZ11 allele or changing the fepA promoter region.
ContributorsKalinkin, Victor Arkady (Co-author) / Misra, Rajeev (Co-author, Thesis director) / Mason, Hugh (Committee member) / Foy, Joseph (Committee member) / Biomedical Informatics Program (Contributor) / School of Life Sciences (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
135641-Thumbnail Image.png
Description
Einstein's theory of special relativity has been used by accomplished science fiction authors since its discovery in 1905, allowing intrepid adventurers to reach far away worlds without having to fear time's passage. By traveling near light speed, these fictional travelers experience a different passage of time as the universe ensures

Einstein's theory of special relativity has been used by accomplished science fiction authors since its discovery in 1905, allowing intrepid adventurers to reach far away worlds without having to fear time's passage. By traveling near light speed, these fictional travelers experience a different passage of time as the universe ensures the commonality of the speed of light in all reference frames. In the here and now, this method of travel has been proposed to assist in interstellar and interplanetary exploration. This paper will investigate the practicality of this method of travel by proposing a mission utilizing a craft with this type of velocity.
ContributorsWaaler, Mason Duran (Author) / Jacob, Richard (Thesis director) / Covatto, Carl (Committee member) / Foy, Joseph (Committee member) / School of Life Sciences (Contributor) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
136656-Thumbnail Image.png
Description
The objective for Under the Camper Shell was to build a prototype of a full living environment within the confines of a pickup truck bed and camper shell. The total volume available to work with is approximately 85ft3. This full living environment entails functioning systems for essential modern living, providing

The objective for Under the Camper Shell was to build a prototype of a full living environment within the confines of a pickup truck bed and camper shell. The total volume available to work with is approximately 85ft3. This full living environment entails functioning systems for essential modern living, providing shelter and spaces for cooking, sleeping, eating, and sanitation. The project proved to be very challenging from the start. First, the livable space is extremely small, being only tall enough for one to sit up straight. The truck and camper shell were both borrowed items, so no modifications were allowed for either, e.g. drilling holes for mounting. The idea was to create a system that could be easily removed, transforming it from a camper to a utility truck. The systems developed for the living environment would be modular and transformative so to accommodate for different necessities when packing. The goal was to create a low-water system with sustainability in mind. Insulating the space was the largest challenge and the most rewarding, using body heat to warm the space and insulate from the elements. Comfort systems were made of high density foam cushions in sections to allow folding and stacking for different functions (sleeping, lounging, and sitting). Sanitation is necessary for healthy living and regular human function. A composting toilet was used for the design, lending to low-water usage and is sustainable over time. Saw dust would be necessary for its function, but upon composting, the unit will generate sufficient amounts of heat to act as a space heater. Showering serves the functions of exfoliation and ridding of bacteria, both of which bath wipes can accomplish, limiting massive volumes of water storage and waste. Storage systems were also designed for modularity. Hooks were installed the length of the bed for hanging or securing items as necessary. Some are available for hanging bags. A cabinetry rail also runs the length of the bed to allow movement of hard storage to accommodate different scenarios. The cooking method is called "sous-vide", a method of cooking food in air-tight bags submerged in hot water. The water is reusable for cooking and no dishes are necessary for serving. Overall, the prototype fulfilled its function as a full living environment with few improvements necessary for future use.
ContributorsLimsirichai, Pimwadee (Author) / Foy, Joseph (Thesis director) / Parrish, Kristen (Committee member) / Barrett, The Honors College (Contributor) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor)
Created2014-12
136662-Thumbnail Image.png
Description
Interaction is key to education, as students who perform their own inquiry into a subject retain information longer. The field of interactive fiction, which emphasizes personal decision making and freedom of choice, is ripe for opportunity as it is relatively simple to develop and deploy to audiences of any size.

Interaction is key to education, as students who perform their own inquiry into a subject retain information longer. The field of interactive fiction, which emphasizes personal decision making and freedom of choice, is ripe for opportunity as it is relatively simple to develop and deploy to audiences of any size. However, few interactive fiction platforms exist with the openness and flexibility required for classroom use. My project attempted to create an interactive fiction platform that can be created for and engaged with by both teachers and students. This led to the creation of an interactive fiction platform that conforms to a variety of requirements, such as openness and compatibility across multiple platforms, and which can display meaningful content. This was accomplished by someone with a content area education background and only limited computer science experience, and shows promise for similar future endeavors.
ContributorsWilley, Kyle Allen (Author) / Bruhn, Karen (Thesis director) / Foy, Joseph (Committee member) / Viles, Rebecca (Committee member) / Barrett, The Honors College (Contributor) / Division of Teacher Preparation (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor)
Created2014-12
136455-Thumbnail Image.png
Description
Although wind turbine bearings are designed to operate 18-20 years, in the recent years premature failure among these bearings has caused this life to reduce to as low as a few months to a year. One of the leading causes of premature failure called white structure flaking is a mechanism

Although wind turbine bearings are designed to operate 18-20 years, in the recent years premature failure among these bearings has caused this life to reduce to as low as a few months to a year. One of the leading causes of premature failure called white structure flaking is a mechanism that was first cited in literature decades ago but not much is understood about it even today. The cause of this mode of failure results from the initiation of white etched cracks (WECs). In this report, different failure mechanisms, especially premature failure mechanisms that were tested and analyzed are demonstrated as a pathway to understanding this phenomenon. Through the use of various tribometers, samples were tested in diverse and extreme conditions in order to study the effect of these different operational conditions on the specimen. Analysis of the tested samples allowed for a comparison of the microstructure alterations in the tested samples to the field bearings affected by WSF.
ContributorsSharma, Aman (Author) / Foy, Joseph (Thesis director) / Adams, James (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2015-05