Recent studies have reported a greater prevalence of spin turns, which are more unstable than step turns, in older adults compared to young adults in laboratory settings. Currently, turning strategies can only be identified through visual observation, either in-person or through video. This paper presents two unique methods and their combination to remotely monitor turning behavior using three uniaxial gyroscopes. Five young adults performed 90° turns at slow, normal, and fast walking speeds around a variety of obstacles while instrumented with three IMUs (attached on the trunk, left and right shank). Raw data from 360 trials were analyzed. Compared to visual classification, the two IMU methods’ sensitivity/specificity to detecting spin turns were 76.1%/76.7% and 76.1%/84.4%, respectively. When the two methods were combined, the IMU had an overall 86.8% sensitivity and 92.2% specificity, with 89.4%/100% sensitivity/specificity at slow speeds. This combined method can be implemented into wireless fall prevention systems and used to identify increased use of spin turns. This method allows for longitudinal monitoring of turning strategies and allows researchers to test for potential associations between the frequency of spin turns and clinically relevant outcomes (e.g., falls) in non-laboratory settings.

Despite the prevalence of directional changes during every-day gait, relatively little is known about turning compared to straight gait. While the center of mass (COM) movement during straight gait is well characterized, the COM trajectory and the factors that influence it are less established for turning. This study investigated the influence of a corner׳s height on the COM trajectory as participants walked around the corner. Ten participants (25.3±3.74 years) performed both 90° step and spin turns to the left at self-selected slow, normal, and fast speeds while walking inside a marked path. A pylon was placed on the inside corner of the path. Four different pylon heights were used to correspond to heights of everyday objects: 0 cm (no object), 63 cm (box, crate), 104 cm (desk, table, counter), 167 cm (shelf, cabinet). Obstacle height was found to significantly affect the COM trajectory. Taller obstacles resulted in more distance between the corner and the COM, and between the corner and the COP. Taller obstacles also were associated with greater curvature in the COM trajectory, indicating a smaller turning radius despite the constant 90° corner. Taller obstacles correlated to an increased required coefficient of friction (RCOF) due to the smaller turning radii. Taller obstacles also tended towards greater mediolateral (ML) COM-COP angles, contrary to the initial hypothesis. Additionally, the COM was found to remain outside the base of support (BOS) for the entire first half of stance phase for all conditions indicating a high risk of falls resulting from slips.