Matching Items (1,012)
Description
The diversity of industrially important chemicals that can be produced biocatalytically from renewable resources continues to expand with the aid of metabolic and pathway engineering. In addition to biofuels, these chemicals also include a number of monomers with utility in conventional and novel plastic materials production. Monomers used for polyamide production are no exception, as evidenced by the recent engineering of microbial biocatalysts to produce cadaverine, putrescine, and succinate. In this thesis the repertoire and depth of these renewable polyamide precursors is expanded upon through the engineering of a novel pathway that enables Escherichia coli to produce, as individual products, both δ-aminovaleric acid (AMV) and glutaric acid when grown in glucose mineral salt medium. δ-Aminovaleric acid is the monomeric subunit of nylon-5 homopolymer, whereas glutaric acid is a dicarboxylic acid used to produce copolymers such as nylon-5,5. These feats were achieved by increasing endogenous production of the required pathway precursor, L-lysine. E. coli was engineered for L-lysine over-production through the introduction and expression of metabolically deregulated pathway genes, namely aspartate kinase III and dihydrodipicolinate synthase, encoded by the feedback resistant mutants lysCfbr and dapAfbr, respectively. After deleting a natural L-lysine decarboxylase, up to 1.6 g/L L-lysine could be produced from glucose in shake flasks as a result. The natural L-lysine degradation pathway of numerous Pseudomonas sp., which passes from L-lysine through both δ-aminovaleric acid and glutaric acid, was then functionally reconstructed in a piecewise manner in the E. coli L-lysine over-producer. Expression of davBA alone resulted in the production of over 0.86 g/L AMV in 48 h. Expression of davBADT resulted in the production of over 0.82 g/L glutaric acid under the same conditions. These production titers were achieved with yields of 69.5 and 68.4 mmol/mol of AMV and glutarate, respectively. Future improvements to the ability to synthesize both products will likely come from the ability to eliminate cadaverine by-product formation through the deletion of cadA and ldcC, genes involved in E. coli's native lysine degradation pathway. Nevertheless, through metabolic and pathway engineering, it is now possible produce the polyamide monomers of δ-aminovaleric acid and glutaric acid from renewable resources.
ContributorsAdkins, Jake M (Author) / Nielsen, David R. (Thesis advisor) / Caplan, Michael (Committee member) / Torres, Cesar (Committee member) / Arizona State University (Publisher)
Created2012
Description
Excessive weight gain during pregnancy is a significant public health concern and has been the recent focus of novel, control systems-based interventions. Healthy Mom Zone (HMZ) is an intervention study that aims to develop and validate an individually tailored and intensively adaptive intervention to manage weight gain for overweight or obese pregnant women using control engineering approaches. Motivated by the needs of the HMZ, this dissertation presents how to use system identification and state estimation techniques to assist in dynamical systems modeling and further enhance the performance of the closed-loop control system for interventions.
Underreporting of energy intake (EI) has been found to be an important consideration that interferes with accurate weight control assessment and the effective use of energy balance (EB) models in an intervention setting. To better understand underreporting, a variety of estimation approaches are developed; these include back-calculating energy intake from a closed-form of the EB model, a Kalman-filter based algorithm for recursive estimation from randomly intermittent measurements in real time, and two semi-physical identification approaches that can parameterize the extent of systematic underreporting with global/local modeling techniques. Each approach is analyzed with intervention participant data and demonstrates potential of promoting the success of weight control.
In addition, substantial efforts have been devoted to develop participant-validated models and incorporate into the Hybrid Model Predictive Control (HMPC) framework for closed-loop interventions. System identification analyses from Phase I led to modifications of the measurement protocols for Phase II, from which longer and more informative data sets were collected. Participant-validated models obtained from Phase II data significantly increase predictive ability for individual behaviors and provide reliable open-loop dynamic information for HMPC implementation. The HMPC algorithm that assigns optimized dosages in response to participant real time intervention outcomes relies on a Mixed Logical Dynamical framework which can address the categorical nature of dosage components, and translates sequential decision rules and other clinical considerations into mixed-integer linear constraints. The performance of the HMPC decision algorithm was tested with participant-validated models, with the results indicating that HMPC is superior to "IF-THEN" decision rules.
Underreporting of energy intake (EI) has been found to be an important consideration that interferes with accurate weight control assessment and the effective use of energy balance (EB) models in an intervention setting. To better understand underreporting, a variety of estimation approaches are developed; these include back-calculating energy intake from a closed-form of the EB model, a Kalman-filter based algorithm for recursive estimation from randomly intermittent measurements in real time, and two semi-physical identification approaches that can parameterize the extent of systematic underreporting with global/local modeling techniques. Each approach is analyzed with intervention participant data and demonstrates potential of promoting the success of weight control.
In addition, substantial efforts have been devoted to develop participant-validated models and incorporate into the Hybrid Model Predictive Control (HMPC) framework for closed-loop interventions. System identification analyses from Phase I led to modifications of the measurement protocols for Phase II, from which longer and more informative data sets were collected. Participant-validated models obtained from Phase II data significantly increase predictive ability for individual behaviors and provide reliable open-loop dynamic information for HMPC implementation. The HMPC algorithm that assigns optimized dosages in response to participant real time intervention outcomes relies on a Mixed Logical Dynamical framework which can address the categorical nature of dosage components, and translates sequential decision rules and other clinical considerations into mixed-integer linear constraints. The performance of the HMPC decision algorithm was tested with participant-validated models, with the results indicating that HMPC is superior to "IF-THEN" decision rules.
ContributorsGuo, Penghong (Author) / Rivera, Daniel E. (Thesis advisor) / Peet, Matthew M. (Committee member) / Forzani, Erica (Committee member) / Deng, Shuguang (Committee member) / Pavlic, Theodore P. (Committee member) / Arizona State University (Publisher)
Created2018
Description
The R-specific alcohol dehydrogenase (RADH or LVIS_0347) from Lactobacillus brevis LB19 was found to possess activity on several short chain aldehydes and ketones. This broad substrate specificity was previously uncharacterized. To demonstrate its relevance to the biofuels industry as well as its broader utility for chiral reductions, a detailed characterization was performed to further investigate the activity and function of RADH.
ContributorsHalloum, Ibrahim (Co-author) / Pugh, Shawn (Co-author) / Nielsen, David R. (Thesis director) / Rege, Kaushal (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor)
Created2015-05
Description
This document outlines the research work done by Shona Becwar in the process design and refinement for the production of sustainable butanol from Clostridium, along with the required background knowledge on the subject. The process that the microbiological organisms go through to produce butanol must be an oxygen free environment for up to 21 days with multiple perforations made into the environment in this period. There was not previously a cost effective method to do this, even in small scale. It was determined that using a butyl rubber septa would allow for the environment to be sustained during the growth process. The pervaporation process was losing butanol product at a rate of approximately 60%, changing the tubing from silicon to stainless steel allowed for a mere 7% loss during the separation process, greatly increasing the prospective of upscaling this process. These improvements to the sustainable butanol production process will allow for a more efficient, therefore more economically competitive product which can be used as a drop in equivalent to the current butanol market.
ContributorsBecwar, Shona Marie (Author) / Nielsen, David R. (Thesis director) / Staggs, Kyle (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In Nepal, a viable solution for environmental management, food and water security is the production of biochar, a carbon material made of plants burned in low oxygen conditions. Currently, the biochar is manufactured into charcoal briquettes and sold on the market for energy usage, however this may not provide the best value for community members who make less than a dollar a day and sell the biochar for as little as 16 cents per kilogram. This thesis seeks to improve the price of biochar and help their livelihoods as well as explore innovative solutions. One way to improve biochar while addressing water security problems is to create activated carbon, which uses its heightened porosity to adsorb contaminants from water or air. Activated carbon is also worth 100x the price of biochar. This thesis evaluates the mass content of biochar produced in Nepal, comparing it to literature values, and performed gravimetric and thermogravimetric analysis, comparing it to Activated Charcoal. Analysis of the biochar system used in Nepal reveals that the byproduct of biochar, biofuels, is highly underutilized. The higher heating value of biochar is 17.95 MJ/kg, which is much lower than other charcoals which burn around 30 MJ/kg. Low volatile content, less than 5% in biochar, provides a smokeless briquette, which is favorable on the market, however low heating value and misutilizations of biofuels in the solution indicate that creating a briquette is not the best use for biochar. Ash content is really high in this biochar, averaging around 12% and it may be due to the feedstock, a composite between Mikania and Lantana, which have 5.23% and 10.77% ash content respectively. This does not necessarily indicate a poor quality biochar, since ash values can vary widely between charcoals. Producing activated charcoal from this biochar is a favored solution; it will increase the price of the biochar, provide water security solutions, and be an appropriate process for this biochar, where heating value and underutilization of biofuel byproducts pose a problem.
ContributorsCayer, Joelle Marie Caroline (Author) / Chhetri, Netra (Thesis director) / Henderson, Mark (Committee member) / Deng, Shuguang (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Separation of carbon dioxide and methane for the upgrade of natural gas through use of pressure swing adsorption could potentially save large amounts of energy from the current, costly process of cryogenic distillation and provides greater cost effectiveness for carbon dioxide capture, and provide larger product flowrates than membrane permeation separation. The purpose of this study is to analyze the effects of varying initial conditions of a MatLab simulation, courtesy of Mai Xu, a graduate student at ASU, designed to use Langmuir isotherms, mass transfer equations, and adsorbent and gas properties to simulate a pressure swing adsorption process with a mixture of methane and carbon dioxide gas feed. The effects that will be varied are the adsorption/desorption time, pressurization/depressurization time, adsorption feed composition, desorption purge composition, adsorption pressure, desorption pressure, adsorption flow rate, and desorption flow rate. The study found that the trends in methane purity and production generally follow the trends predicted by literature and relevant equations, with pressure boundaries being the largest impacting factor. In addition there was a markedly inverse correlation between purity of methane product and the productivity of the system. This trend was only violated in one instance, at very low vacuum pressure during desorption, which could indicate an area that requires further study. Overall, the main areas of improvement in pressure swing adsorption for this system would be improving the selectivity of adsorption of carbon dioxide over methane, which requires improvement and change of the adsorbent, and more extreme vacuum pressures during desorption, both of which will increase methane yield and reduce operating costs.
ContributorsCook, Alexander Charles (Author) / Deng, Shuguang (Thesis director) / Mu, Bin (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
With the new independence of adulthood, college students are a group susceptible to adopting unsupported, if not harmful, health practices. A survey of Arizona State University undergraduate students (N=200) was conducted to evaluate supplement use, trust in information sources, and beliefs about supplement regulation. Of those who reported using supplements, college students most frequently received information from friends and family. STEM majors in fields unrelated to health who were taking a supplement were found to be less likely to receive information about the supplement from a medical practitioner than those in health fields or those in non-STEM majors (-26.9%, p=0.018). STEM majors in health-related fields were 15.0% more likely to treat colds and/or cold symptoms with research-supported methods identified from reliable sources, while non-health STEM and non-STEM majors were more likely to take unsupported cold treatments (p=0.010). Surveyed students, regardless of major, also stated they would trust a medical practitioner for supplement advice above other sources (88.0%), and the majority expressed a belief that dietary supplements are approved/regulated by the government (59.8%).
ContributorsPerez, Jacob Tanner (Author) / Hendrickson, Kirstin (Thesis director) / Lefler, Scott (Committee member) / College of Liberal Arts and Sciences (Contributor) / School of Molecular Sciences (Contributor) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Carbon capture is an essential way to reduce greenhouse gas emissions. One way to decrease the emissions is through the use of adsorbents such as zeolites. Dr. Dong-Kyun Seo’s group (School of Molecular Sciences, Arizona State University) synthesized the nanostructured faujasite (NaX). The zeolite was characterized using Scanning Electron Microscopy (SEM) and the physisorption properties were determined using ASAP 2020. ASAP 2020 tests of the nano-zeolite pellets at 77K in a liquid N2 bath determined the BET surface area of 547.1 m2/mol, T-plot micropore volume of 0.2257 cm3/g, and an adsorption average pore width of 5.9 Å. The adsorption isotherm (equilibrium) of CH4, N2, and CO2 were measured at 25ºC. Adsorption isotherm experiments concluded that the linear isotherm was the best fit for N2, and CH4 and the Sips isotherm was a better fit than the Langmuir and Freundlich isotherm for CO2. At 25ºC and 1 atm the zeolite capacity for CO2 is 4.3339 mmol/g, 0.1948 mmol/g for CH4, and 0.3534 mmol/g for N2. The zeolite has a higher CO2 capacity than the conventional NaX zeolite. Breakthrough experiments were performed in a fixed bed 22in, 0.5 in packing height and width at 1 atm and 298 K with nano-zeolite pellets. The gas chromatographer tested and recorded the data every two minutes with a flow rate of 10 cm3/min for N2 and 10 cm3/min CO2. Breakthrough simulations of the zeolite in a fixed bed adsorber column were conducted on MATLAB utilizing varying pressures, flow rates, and fed ratios of various CO2, N2 and CH4. Simulations using ideal adsorbed solution theory (IAST) calculations determined that the selectivity of CO2 in flue gas (15% CO2 + 85% N2) is 571.79 at 1 MPa, significantly higher than commercial zeolites and literature. The nanostructured faujasite zeolite appears to be a very promising adsorbent for CO2/N2 capture from flue gas and the separation of CO2/N2.
ContributorsClark, Krysta D. (Author) / Deng, Shuguang (Thesis director) / Green, Matthew (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
ContributorsChandler, N. Kayla (Author) / Neisewander, Janet (Thesis director) / Sanabria, Federico (Committee member) / Olive, M. Foster (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2013-05
Description
I propose that norms regulate behaviors that negatively impact an individual's survival and reproduction. But because monitoring and enforcing of norms can be costly, individuals should be selective about which norms they police and under what circumstances they should do so. Two studies tested this idea by experimentally activating fitness-relevant motives and having participants answer questions about the policing of norms. The first study examined a norm prescribing respect for status and another proscribing sexual coercion. Results from Study 1 failed to support the hypotheses; activating a status-seeking motive did not have the predicted effects on policing of the respect-status norm nor did activating a mating motive have the predicted effects on policing of the respect-status norm or anti-coercion norm. Study 2 examined two new norms, one prescribing that people stay home when sick and the other proscribing people from having sex with another person's partners. Study 2 also manipulated whether self or others were the target of the policing. Study 2 failed to provide support; a disease avoidance motive failed to have effects on policing of the stay home when sick norm. Individuals in a relationship under a mating motive wanted less policing of others for violation of the mate poaching norm than those in a baseline condition, opposite of the predicted effects.
ContributorsSmith, M. Kristopher (Author) / Neuberg, L. Steven (Thesis director) / Presson, Clark (Committee member) / Hruschka, J. Daniel (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2013-05