Matching Items (631)
Filtering by

Clear all filters

133345-Thumbnail Image.png
Description
The purpose of this study was to observe the effectiveness of the phenylalanyl arginine β-naphthylamide dihydrochloride inhibitor and Tween 20 when combined with an antibiotic against Escherichia. coli. As antibiotic resistance becomes more and more prevalent it is necessary to think outside the box and do more than just increase

The purpose of this study was to observe the effectiveness of the phenylalanyl arginine β-naphthylamide dihydrochloride inhibitor and Tween 20 when combined with an antibiotic against Escherichia. coli. As antibiotic resistance becomes more and more prevalent it is necessary to think outside the box and do more than just increase the dosage of currently prescribed antibiotics. This study attempted to combat two forms of antibiotic resistance. The first is the AcrAB efflux pump which is able to pump antibiotics out of the cell. The second is the biofilms that E. coli can form. By using an inhibitor, the pump should be unable to rid itself of an antibiotic. On the other hand, using Tween allows for biofilm formation to either be disrupted or for the biofilm to be dissolved. By combining these two chemicals with an antibiotic that the efflux pump is known to expel, low concentrations of each chemical should result in an equivalent or greater effect on bacteria compared to any one chemical in higher concentrations. To test this hypothesis a 96 well plate BEC screen test was performed. A range of antibiotics were used at various concentrations and with varying concentrations of both Tween and the inhibitor to find a starting point. Following this, Erythromycin and Ciprofloxacin were picked as the best candidates and the optimum range of the antibiotic, Tween, and inhibitor were established. Finally, all three chemicals were combined to observe the effects they had together as opposed to individually or paired together. From the results of this experiment several conclusions were made. First, the inhibitor did in fact increase the effectiveness of the antibiotic as less antibiotic was needed if the inhibitor was present. Second, Tween showed an ability to prevent recovery in the MBEC reading, showing that it has the ability to disrupt or dissolve biofilms. However, Tween also showed a noticeable decrease in effectiveness in the overall treatment. This negative interaction was unable to be compensated for when using the inhibitor and so the hypothesis was proven false as combining the three chemicals led to a less effective treatment method.
ContributorsPetrovich Flynn, Chandler James (Author) / Misra, Rajeev (Thesis director) / Bean, Heather (Committee member) / Perkins, Kim (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133357-Thumbnail Image.png
Description
The purpose of this study was to create a screening tool specifically for the identification of sex trafficking victims in the medical setting through the analysis of existing human trafficking screening tool studies geared towards use in the medical setting. Screening questions from these studies were compiled and modified into

The purpose of this study was to create a screening tool specifically for the identification of sex trafficking victims in the medical setting through the analysis of existing human trafficking screening tool studies geared towards use in the medical setting. Screening questions from these studies were compiled and modified into a survey that was distributed to healthcare professionals through the nationwide HEAL (Health Professional Education, Advocacy, Linkage) Trafficking listserv. Each screening tool study demonstrated benefits and disadvantages that were helpful in the sampling and selection of screening tool questions. The small sample size and a lack of data on the attitudes of medical professionals on sex trafficked victims were noted as limitations to this study. Further implications for this study would include validating the screening tool questions in a medical setting to determine the sensitivity of the survey in identifying patients as possible sex trafficking victims.
ContributorsCatano, Karen Samantha (Co-author) / Byun, Jiwon (Co-author) / Roe-Sepowitz, Dominique (Thesis director) / Lee, Maurice (Committee member) / School for the Science of Health Care Delivery (Contributor) / College of Integrative Sciences and Arts (Contributor) / W.P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133363-Thumbnail Image.png
Description
An in-depth analysis on the effects vortex generators cause to the boundary layer separation that occurs when an internal flow passes through a diffuser is presented. By understanding the effects vortex generators demonstrate on the boundary layer, they can be utilized to improve the performance and efficiencies of diffusers and

An in-depth analysis on the effects vortex generators cause to the boundary layer separation that occurs when an internal flow passes through a diffuser is presented. By understanding the effects vortex generators demonstrate on the boundary layer, they can be utilized to improve the performance and efficiencies of diffusers and other internal flow applications. An experiment was constructed to acquire physical data that could assess the change in performance of the diffusers once vortex generators were applied. The experiment consisted of pushing air through rectangular diffusers with half angles of 10, 20, and 30 degrees. A velocity distribution model was created for each diffuser without the application of vortex generators before modeling the velocity distribution with the application of vortex generators. This allowed the two results to be directly compared to one another and the improvements to be quantified. This was completed by using the velocity distribution model to find the partial mass flow rate through the outer portion of the diffuser's cross-sectional area. The analysis concluded that the vortex generators noticeably increased the performance of the diffusers. This was best seen in the performance of the 30-degree diffuser. Initially the diffuser experienced airflow velocities near zero towards the edges. This led to 0.18% of the mass flow rate occurring in the outer one-fourth portion of the cross-sectional area. With the application of vortex generators, this percentage increased to 5.7%. The 20-degree diffuser improved from 2.5% to 7.9% of the total mass flow rate in the outer portion and the 10-degree diffuser improved from 11.9% to 19.2%. These results demonstrate an increase in performance by the addition of vortex generators while allowing the possibility for further investigation on improvement through the design and configuration of these vortex generators.
ContributorsSanchez, Zachary Daniel (Author) / Takahashi, Timothy (Thesis director) / Herrmann, Marcus (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / W.P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133366-Thumbnail Image.png
Description
The objective of this project was to design an electrically driven centrifugal pump for the Daedalus Astronautics @ASU hybrid rocket engine (HRE). The pump design was purposefully simplified due to time, fabrication, calculation, and capability constraints, which resulted in a lower fidelity design, with the option to be improved later.

The objective of this project was to design an electrically driven centrifugal pump for the Daedalus Astronautics @ASU hybrid rocket engine (HRE). The pump design was purposefully simplified due to time, fabrication, calculation, and capability constraints, which resulted in a lower fidelity design, with the option to be improved later. The impeller, shroud, volute, shaft, motor, and ESC were the main focuses of the pump assembly, but the seals, bearings, lubrication methods, and flow path connections were considered as elements which would require future attention. The resulting pump design is intended to be used on the Daedalus Astronautics HRE test cart for design verification. In the future, trade studies and more detailed analyses should and will be performed before this pump is integrated into the Daedalus Astronautics flight-ready HRE.
ContributorsShillingburg, Ryan Carl (Author) / White, Daniel (Thesis director) / Brunacini, Lauren (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
131515-Thumbnail Image.png
Description
Human habitation of other planets requires both cost-effective transportation and low time-of-flight for human passengers and critical supplies. The current methods for interplanetary orbital transfers, such as the Hohmann transfer, require either expensive, high fuel maneuvers or extended space travel. However, by utilizing the high velocities of a super-geosynchronous space

Human habitation of other planets requires both cost-effective transportation and low time-of-flight for human passengers and critical supplies. The current methods for interplanetary orbital transfers, such as the Hohmann transfer, require either expensive, high fuel maneuvers or extended space travel. However, by utilizing the high velocities of a super-geosynchronous space elevator, spacecraft released from an apex anchor could achieve interplanetary transfers with minimal Delta V fuel and time of flight requirements. By using Lambert’s Problem and Free Release propagation to determine the minimal fuel transfer from a terrestrial space elevator to Mars under a variety of initial conditions and time-of-flight constraints, this paper demonstrates that the use of a space elevator release can address both needs by dramatically reducing the time-of-flight and the fuel budget.
ContributorsTorla, James (Author) / Peet, Matthew (Thesis director) / Swan, Peter (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
133887-Thumbnail Image.png
Description
This thesis evaluates the viability of an original design for a cost-effective wheel-mounted dynamometer for road vehicles. The goal is to show whether or not a device that generates torque and horsepower curves by processing accelerometer data collected at the edge of a wheel can yield results that are comparable

This thesis evaluates the viability of an original design for a cost-effective wheel-mounted dynamometer for road vehicles. The goal is to show whether or not a device that generates torque and horsepower curves by processing accelerometer data collected at the edge of a wheel can yield results that are comparable to results obtained using a conventional chassis dynamometer. Torque curves were generated via the experimental method under a variety of circumstances and also obtained professionally by a precision engine testing company. Metrics were created to measure the precision of the experimental device's ability to consistently generate torque curves and also to compare the similarity of these curves to the professionally obtained torque curves. The results revealed that although the test device does not quite provide the same level of precision as the professional chassis dynamometer, it does create torque curves that closely resemble the chassis dynamometer torque curves and exhibit a consistency between trials comparable to the professional results, even on rough road surfaces. The results suggest that the test device provides enough accuracy and precision to satisfy the needs of most consumers interested in measuring their vehicle's engine performance but probably lacks the level of accuracy and precision needed to appeal to professionals.
ContributorsKing, Michael (Author) / Ren, Yi (Thesis director) / Spanias, Andreas (Committee member) / School of Mathematical and Statistical Sciences (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133913-Thumbnail Image.png
Description
This research project will test the structural properties of a 3D printed origami inspired structure and compare them with a standard honeycomb structure. The models have equal face areas, model heights, and overall volume but wall thicknesses will be different. Stress-deformation curves were developed from static loading testing. The area

This research project will test the structural properties of a 3D printed origami inspired structure and compare them with a standard honeycomb structure. The models have equal face areas, model heights, and overall volume but wall thicknesses will be different. Stress-deformation curves were developed from static loading testing. The area under these curves was used to calculate the toughness of the structures. These curves were analyzed to see which structures take more load and which deform more before fracture. Furthermore, graphs of the Stress-Strain plots were produced. Using 3-D printed parts in tough resin printed with a Stereolithography (SLA) printer, the origami inspired structure withstood a larger load, produced a larger toughness and deformed more before failure than the equivalent honeycomb structure.
ContributorsMcGregor, Alexander (Author) / Jiang, Hanqing (Thesis director) / Kingsbury, Dallas (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
133914-Thumbnail Image.png
Description
This paper describes the research done to quantify the relationship between external air temperature and energy consumption and internal air temperature and energy consumption. The study was conducted on a LEED Gold certified building, College Avenue Commons, located on Arizona State University's Tempe campus. It includes information on the background

This paper describes the research done to quantify the relationship between external air temperature and energy consumption and internal air temperature and energy consumption. The study was conducted on a LEED Gold certified building, College Avenue Commons, located on Arizona State University's Tempe campus. It includes information on the background of previous studies in the area, some that agree with the research hypotheses and some that take a different path. Real-time data was collected hourly for energy consumption and external air temperature. Intermittent internal air temperature was collected by undergraduate researcher, Charles Banke. Regression analysis was used to prove two research hypotheses. The authors found no correlation between external air temperature and energy consumption, nor did they find a relationship between internal air temperature and energy consumption. This paper also includes recommendations for future work to improve the study.
ContributorsBanke, Charles Michael (Author) / Chong, Oswald (Thesis director) / Parrish, Kristen (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
134162-Thumbnail Image.png
Description
Insects have intricate systems they depend on for survival. They live in societies where every individual plays an important role. Ants are a great example of this observation. They are known for having structurally sound societies that ensure the livelihood of the colony. The ant species analyzed for this research,

Insects have intricate systems they depend on for survival. They live in societies where every individual plays an important role. Ants are a great example of this observation. They are known for having structurally sound societies that ensure the livelihood of the colony. The ant species analyzed for this research, Harpegnathos saltator, portrays a structured colony and serves as a useful example of levels of hierarchy. In the colony of H. saltator, one can find a queen, gamergates, workers, and male ants living underground in Southern India. Recording and analyzing egg-laying rates are important in this study because of the amount of information it provides. It is used especially when observing the relationship among the gamergates in colonies with varying colony sizes. Three different methods were used to record the egg-laying rates, each providing insight into valuable information. Results show that the smaller colonies with fewer identified gamergates do share an equal amount of egg-laying. In larger colonies, it appears that there are more active identified gamergates than others. Egg-laying duration times are smaller in colonies with fewer gamergates. It is also found that the presence of brood does not affect egg-laying rates and reproductive inhibition could be a possibility based on two of the colonies observed F65 and F21. Based on the data found, a more active colony that attempts to maintain stability by demonstrating aggression may be affecting the reproduction of gamergates. Future work that would further strengthen the research and conclusions made would involve further observation of colonies, both large and small, with varying numbers of gamergates. More observation involving behavior among gamergates and workers would also be beneficial. Mathematical modeling could also be incorporated to create equations that could determine information about colonies based on size, number of gamergates, and egg-laying rates.
ContributorsMayoral, Alejandra (Author) / Kang, Yun (Thesis director) / Liebig, Juergen (Committee member) / College of Integrative Sciences and Arts (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
134167-Thumbnail Image.png
Description
INTRODUCTION: This thesis delves into how PR-media relations evolved in the past 20 years (since 1997). It discusses several aspects of media relations, such as relationships, old and new media relations tools, pitching and predictions about the future of media relations. LITERATURE REVIEW: A review of previous literature on media

INTRODUCTION: This thesis delves into how PR-media relations evolved in the past 20 years (since 1997). It discusses several aspects of media relations, such as relationships, old and new media relations tools, pitching and predictions about the future of media relations. LITERATURE REVIEW: A review of previous literature on media relations guided this research. Past research explained stigmas about the relationship between public relations professionals and journalists, how pitching has evolved, social media's role in modern day media relations and the dynamic between earned and owned media. METHODOLOGY: The research involved a mixed method approach with qualitative and quantitative methods. First, in-depth interviews were conducted with both journalists and public relations professionals who work in Arizona. These interviews were conducted either in-person or over the phone. Second, two in-depth interviews were conducted over the phone with a public relations professional who worked at Intel for over 20 years for a case study. Finally, a survey was distributed to public relations professionals in Arizona via email and through social media websites (Facebook and Twitter) to provide insight on the media relations tactics they have recently utilized, as well as their use of social media. There were also five follow-up interviews conducted with survey respondents. FINDINGS: After conducting these three methods of research, the qualitative (quotes) and quantitative (survey) data were analyzed to provide detailed opinions about media relations including: the relationships between public relations professionals and the media, the use of old and new media relations tools, what an effective pitch looks like, the use of social media, comparisons between less and more experienced PR professionals, and predictions on the future of media relations. DISCUSSION: The findings from this research led to several conclusions regarding media relations such as: the importance of maintaining a trusting and respectful relationship, traditional tools' place in modern day media relations, email's dominance as a media relations tool, the hesitation by PR professionals to use social media as a communication tool with journalists, more experienced PR professionals' lack of hesitation to use social media as a communication tool with journalists, and the prediction that relationships will remain key in media relations despite the changes in media relations tools themselves. CONCLUSION: Based on all of the findings from this research, it was concluded that media relations has evolved to keep up with the changing media landscape, however, traditional tools and practices remain relevant and essential to media relations.
ContributorsTillman, Krista Michelle (Author) / Wu, Xu (Thesis director) / Bovio, Sonia (Committee member) / College of Integrative Sciences and Arts (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / Department of Marketing (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12