Matching Items (21)
Description
The Jovian moon Europa's putative subsurface ocean offers one of the closest astrobiological targets for future exploration. It’s geologically young surface with a wide array of surface features aligned with distinct surface composition suggests past/present geophysical activity with implications for habitability. In this body of work, I propose a hypothesis for material transport from the ocean towards the surface via a convecting ice-shell. Geodynamical modeling is used to perform numerical experiments on a two-phase water-ice system to test the hypotheses. From these models, I conclude that it is possible for trace oceanic chemistry, entrapped into the newly forming ice at the ice-ocean phase interface, to reach near-surface. This new ice is advected across the ice-shell and towards the surface affirming a dynamical possibility for material transport across the ice-ocean system, of significance to astrobiological prospecting. Next, I use these self-consistent ice-ocean models to study the thickening of ice-shell over time. Europa is subject to the immense gravity field of Jupiter that generates tidal heating within the moon. Analysis of cases with uniform and localized internal tidal heating reveal that as the ice-shell grows from a warm initial ocean, there is an increase in the size of convection cells which causes a dramatic increase in the growth rate of the ice-shell. Addition of sufficient amount of heat also results in an ice-shell at an equilibrium thickness. Localization of tidal heating as a function of viscosity controls the equilibrium thickness. These models are then used to understand how compositional heterogeneity can be created in a growing ice-shell. Impurities (e.g. salts on the surface) that enter the ice-shell get trapped in the thickening ice-shell by freezing. I show the distribution pattern of heterogeneities that can form within the ice-shell at different times. This may be of potential application in identifying the longevity and mobility of brine pockets in Europa's ice-shell which are thought to be potential habitable niches.
ContributorsAllu Peddinti, Divya (Author) / McNamara, Allen Keith (Thesis advisor) / Garnero, Edward (Committee member) / Desch, Steven (Committee member) / Zolotov, Mikhail (Committee member) / Clarke, Amanda (Committee member) / Arizona State University (Publisher)
Created2017
Description
Ascraeus Mons (AM) is the northeastern most large shield volcano residing in the Tharsis province on Mars. AM has a diameter of ~350 km and reaches a height of 16 km above Mars datum, making AM the third largest volcano on Mars. Previous mapping of a limited area of these volcanoes using HRSC images (13-25 m/pixel) revealed a diverse distribution of volcanic landforms within the calderas, along the flanks, rift aprons, and surrounding plains. The general scientific objective for which mapping was based was to show the different lava flow morphologies across AM to better understand the evolution and geologic history.
A 1: 1,000,000 scale geologic map of Ascraeus Mons was produced using ArcGIS and will be submitted to the USGS for review and publication. Mapping revealed 26 units total, broken into three separate categories: Flank units, Apron and Scarp units, and Plains units. Units were defined by geomorphological characteristics such as: surface texture, albedo, size, location, and source. Defining units in this manner allowed for contact relationships to be observed, creating a relative age date for each unit to understand the evolution and history of this large shield volcano.
Ascraeus Mons began with effusive, less viscous style of eruptions and transitioned to less effusive, more viscous eruptions building up the main shield. This was followed by eruptions onto the plains from the two main rift aprons on AM. Apron eruptions continued, while flank eruptions ceased, surrounding and embaying the flanks of AM. Eruptions from the rifts wane and build up the large aprons and low shield fields. Glaciers modified the base of the west flank and deposited the Aureole material. Followed by localized recent eruptions on the flanks, in the calderas, and small vent fields. Currently AM is modified by aeolian and tectonic processes. While the overall story of Ascraeus Mons does not change significantly, higher resolution imagery allowed for a better understanding of magma evolution and lava characteristics across the main shield. This study helps identify martian magma production rates and how not only Ascraeus Mons evolved, but also the Tharsis province and other volcanic regions of Mars.
A 1: 1,000,000 scale geologic map of Ascraeus Mons was produced using ArcGIS and will be submitted to the USGS for review and publication. Mapping revealed 26 units total, broken into three separate categories: Flank units, Apron and Scarp units, and Plains units. Units were defined by geomorphological characteristics such as: surface texture, albedo, size, location, and source. Defining units in this manner allowed for contact relationships to be observed, creating a relative age date for each unit to understand the evolution and history of this large shield volcano.
Ascraeus Mons began with effusive, less viscous style of eruptions and transitioned to less effusive, more viscous eruptions building up the main shield. This was followed by eruptions onto the plains from the two main rift aprons on AM. Apron eruptions continued, while flank eruptions ceased, surrounding and embaying the flanks of AM. Eruptions from the rifts wane and build up the large aprons and low shield fields. Glaciers modified the base of the west flank and deposited the Aureole material. Followed by localized recent eruptions on the flanks, in the calderas, and small vent fields. Currently AM is modified by aeolian and tectonic processes. While the overall story of Ascraeus Mons does not change significantly, higher resolution imagery allowed for a better understanding of magma evolution and lava characteristics across the main shield. This study helps identify martian magma production rates and how not only Ascraeus Mons evolved, but also the Tharsis province and other volcanic regions of Mars.
ContributorsMohr, Kyle James (Author) / Williams, David A. (Thesis advisor) / Christensen, Phil R (Thesis advisor) / Clarke, Amanda (Committee member) / Arizona State University (Publisher)
Created2017
Description
Assessments for the threats posed by volcanic eruptions rely in large part on the accurate prediction of volcanic plume motion over time. That predictive capacity is currently hindered by a limited understanding of volcanic plume dynamics. While eruption rate is considered a dominant control on volcanic plume dynamics, the effects of variable eruption rates on plume rise and evolution are not well understood. To address this aspect of plume dynamics, I conducted an experimental investigation wherein I quantified the relationship between laboratory jet development and highly-variable discharge rates under conditions analogous to those which may prevail in unsteady, short-lived explosive eruptions. I created turbulent jets in the laboratory by releasing pressurized water into a tank of still water. I then measured the resultant jet growth over time using simple video images and particle image velocimetry (PIV). I investigated jet behavior over a range of jet Reynolds numbers which overlaps with estimates of Reynolds numbers for short-duration volcanic plumes. By analysis of the jet boundary and velocity field evolution, I discovered a direct relationship between changes in vent conditions and jet evolution. Jet behavior evolved through a sequence of three stages - jet-like, transitional, and puff-like - that correlate with three main injection phases - acceleration, deceleration and off. While the source was off, jets were characterized by relatively constant internal velocity distributions and flow propagation followed that of a classical puff. However, while the source was on, the flow properties - both in the flows themselves and in the induced ambient flow - changed abruptly with changes at the source. On the basis of my findings for unsteady laboratory jets, I conclude that variable eruption rates with characteristic time scales close to eruption duration have first-order control over volcanic plume evolution. Prior to my study, the significance of this variation was largely uncharacterized as the volcanology community predominately uses steady eruption models for interpretation and prediction of activity. My results suggest that unsteady models are necessary to accurately interpret behavior and assess threats from unsteady, short-lived eruptions.
ContributorsChojnicki, Kirsten (Author) / Clarke, Amanda (Thesis advisor) / Williams, Stanley (Committee member) / Adrian, Ronald (Committee member) / Phillips, Jeremy (Committee member) / Fernando, Harindra (Committee member) / Arizona State University (Publisher)
Created2012
Description
With the growth of the additive manufacturing (AM) industry for metal components, there is an
economic pressure for improved AM processes to overcome the shortcomings of current AM technologies (i.e., limited deposition rates, surface roughness, etc.). Unfortunately, the development of these processes can be time and capital-intensive due to the large number of input parameters and the sensitivity of the process’s outputs to said inputs. There consequently has been a strong push to develop computational design tools (such
as CFD models) which can decrease the time and cost of AM technology developments. However, many of the developments that have been made to simulate AM through CFD have done so on custom CFD packages (as opposed to commercially available packages), which increases the barrier to entry of employing computational design tools. For that reason, this paper has demonstrated a method for simulating fused deposition modeling using a commercially available CFD package (Fluent). The results from this implementation are qualitatively promising when compared to samples produced by existing metal AM
processes, however additional work is needed to validate the model more rigorously and to reduce the computational cost. Finally, the developed model was used to perform a parameter sweep, thereby demonstrating a use case of the tool to help in parameter optimization.
ContributorsWeissman, Eric (Author) / Huang, Huei-Ping (Thesis director) / Clarke, Amanda (Committee member) / Barrett, The Honors College (Contributor) / School for Engineering of Matter,Transport & Enrgy (Contributor) / School of International Letters and Cultures (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2024-05
Description
Chemical and physical interactions of flowing ice and rock have inexorably shaped planetary surfaces. Weathering in glacial environments is a significant link in biogeochemical cycles – carbon and strontium – on Earth, and may have once played an important role in altering Mars’ surface. Despite growing recognition of the importance of low-temperature chemical weathering, these processes are still not well understood. Debris-coated glaciers are also present on Mars, emphasizing the need to study ice-related processes in the evolution of planetary surfaces. During Earth’s history, subglacial environments are thought to have sheltered communities of microorganisms from extreme climate variations. On Amazonian Mars, glaciers such as lobate debris aprons (LDA) could have hosted chemolithotrophic communities, making Mars’ present glaciers candidates for life preservation. This study characterizes glacial processes on both Earth and Mars.
Chemical weathering at Robertson Glacier, a small alpine glacier in the Canadian Rocky Mountains, is examined with a multidisciplinary approach. The relative proportions of differing dissolution reactions at various stages in the glacial system are empirically determined using aqueous geochemistry. Synthesis of laboratory and orbital thermal infrared spectroscopy allows identification of dissolution rinds on hand samples and characterization of carbonate dissolution signals at orbital scales, while chemical and morphological evidence for thin, discontinuous weathering rinds at microscales are evident from electron microscopy. Subglacial dissolution rates are found to outpace those of the proglacial till plain; biologically-mediated pyrite oxidation drives the bulk of this acidic weathering.
Second, the area-elevation relationship, or hypsometry, of LDA in the midlatitudes of Mars is characterized. These glaciers are believed to have formed ~500 Ma during a climate excursion. Hypsometric measurements of these debris-covered glaciers enable insight into past flow regimes and drive predictions about past climate scenarios. The LDA in this study fall into three major groups, strongly dependent on basal elevation, implying regional and climatic controls on ice formation and flow.
I show that biologically-mediated mineral reactions drive high subglacial dissolution rates, such that variations within the valley can be detected with remote sensing techniques. In future work, these insights can be applied to examining Mars’ glacial regions for signs of chemical alteration and biosignatures.
Chemical weathering at Robertson Glacier, a small alpine glacier in the Canadian Rocky Mountains, is examined with a multidisciplinary approach. The relative proportions of differing dissolution reactions at various stages in the glacial system are empirically determined using aqueous geochemistry. Synthesis of laboratory and orbital thermal infrared spectroscopy allows identification of dissolution rinds on hand samples and characterization of carbonate dissolution signals at orbital scales, while chemical and morphological evidence for thin, discontinuous weathering rinds at microscales are evident from electron microscopy. Subglacial dissolution rates are found to outpace those of the proglacial till plain; biologically-mediated pyrite oxidation drives the bulk of this acidic weathering.
Second, the area-elevation relationship, or hypsometry, of LDA in the midlatitudes of Mars is characterized. These glaciers are believed to have formed ~500 Ma during a climate excursion. Hypsometric measurements of these debris-covered glaciers enable insight into past flow regimes and drive predictions about past climate scenarios. The LDA in this study fall into three major groups, strongly dependent on basal elevation, implying regional and climatic controls on ice formation and flow.
I show that biologically-mediated mineral reactions drive high subglacial dissolution rates, such that variations within the valley can be detected with remote sensing techniques. In future work, these insights can be applied to examining Mars’ glacial regions for signs of chemical alteration and biosignatures.
ContributorsRutledge, Alicia Marie (Author) / Christensen, Philip R. (Thesis advisor) / Shock, Everett (Committee member) / Clarke, Amanda (Committee member) / Sharp, Thomas (Committee member) / Whipple, Kelin (Committee member) / Arizona State University (Publisher)
Created2015
Description
Both volcanism and impact cratering produce ejecta and associated deposits incorporating a molten rock component. While the heat sources are different (exogenous vs. endogenous), the end results are landforms with similar morphologies including ponds and flows of impact melt and lava around the central crater. Ejecta from both impact and volcanic craters can also include a high percentage of melted rock. Using Lunar Reconnaissance Orbiter Camera Narrow Angle Camera (LROC NAC) images, crucial details of these landforms are finally revealed, suggesting a much more dynamic Moon than is generally appreciated. Impact melt ponds and flows at craters as small as several hundred meters in diameter provide empirical evidence of abundant melting during the impact cratering process (much more than was previously thought), and this melt is mobile on the lunar surface for a significant time before solidifying. Enhanced melt deposit occurrences in the lunar highlands (compared to the mare) suggest that porosity, target composition, and pre-existing topography influence melt production and distribution. Comparatively deep impact craters formed in young melt deposits connote a relatively rapid evolution of materials on the lunar surface. On the other end of the spectrum, volcanic eruptions have produced the vast, plains-style mare basalts. However, little was previously known about the details of small-area eruptions and proximal volcanic deposits due to a lack of resolution. High-resolution images reveal key insights into small volcanic cones (0.5-3 km in diameter) that resemble terrestrial cinder cones. The cones comprise inter-layered materials, spatter deposits, and lava flow breaches. The widespread occurrence of the cones in most nearside mare suggests that basaltic eruptions occur from multiple sources in each basin and/or that rootless eruptions are relatively common. Morphologies of small-area volcanic deposits indicate diversity in eruption behavior of lunar basaltic eruptions driven by magmatic volatiles. Finally, models of polar volatile behavior during impact-heating suggest that chemical alteration of minerals in the presence of liquid water is one possible outcome that was previously not thought possible on the Moon.
ContributorsStopar, Julie D (Author) / Robinson, Mark S. (Thesis advisor) / Bell, James (Committee member) / Christensen, Philip R. (Philip Russel) (Committee member) / Clarke, Amanda (Committee member) / Scowen, Paul (Committee member) / Arizona State University (Publisher)
Created2016
Description
My dissertation research broadly focuses on the geochemical and physical exchange of materials between the Earth’s crust and mantle at convergent margins, and how this drives the compositional diversity observed on the Earth’s surface. I combine traditional petrologic and geochemical studies of natural and experimental high-pressure mafic rocks, with thermodynamic modeling of high-pressure aqueous fluids and mafic-ultramafic lithologies allowing for more complete understanding of fluid-melt-rock interactions. The results of the research that follows has important implications for: the role of lower crustal foundering in the geochemical origin and evolution of the modern continental crust (Chapter 2; Guild et al., under review), metasomatic processes involving aqueous metal-carbon complexes in high pressure-temperature subduction zone fluids (Chapter 3; Guild & Shock, 2020), natural hydrous mineral stability at the slab-mantle interface (Chapter 4; Guild, et al., in preparation) and water-undersaturated melting in the sub-arc (Chapter 5; Guild & Till, in preparation).
ContributorsGuild, Meghan Rose (Author) / Till, Christy B. (Thesis advisor) / Shock, Everett L (Committee member) / Hervig, Richard L (Committee member) / Hartnett, Hilairy (Committee member) / Clarke, Amanda (Committee member) / Arizona State University (Publisher)
Created2020
Description
Cinder cones are common volcanic structures that occur in fields, and on the flanks of shield volcanoes, stratovolcanoes, and calderas. Because they are common structures, they have a significant possibility of impacting humans and human environments. As such, there is a need to analyze cinder cones to get a better understanding of their eruptions and associated hazards. I will approach this analysis by focusing on volcanic bombs and ballistics, which are large clots of lava that are launched from the volcanic vent, follow ballistic trajectories, and can travel meters to a few kilometers from their source (e.g. Fagents and Wilson 1993; Waitt et al. 1995).
Tecolote Volcano in the Pinacate Volcanic Field in Mexico contains multiple vents within a horseshoe-shaped crater that have all produced various ejecta (Zawacki et al. 2019). The objectives of this research are to map ballistic distribution to understand the relationship between the source vent or vents and the bombs and ballistics that litter the region around Tecolote, and interpret the eruption conditions that ejected those bombs by using their distributions, morphologies, and fine-scale textures.
The findings of this work are that these bombs are apparently from the last stages of the eruption, succeeding the final lava flows. The interiors and exteriors of the bombs display different cooling rates which can are indicated by the fabric found within. Using this, certain characteristics of the bombs during eruption were extrapolated. The ‘cow pie’ bombs were determined to be the least viscous or contained a higher gas content at the time of eruption. Whereas the ribbon/rope bombs were determined to be the most viscous or contained a lesser gas content. Looking at the Southern Bomb Field site, it is dominated by large bombs that were during flight were molded into aerodynamic shapes. The Eastern Rim site is dominated by smaller bombs that appeared to be more liquid during the eruption. This difference in the two sites is a probable indication of at least two different eruptive events of different degrees of explosivity. Overall, aerodynamic bombs are more common and extend to greater distances from the presumed vent (up to 800 m), while very fluidal bombs are uncommon beyond 500 meters. Fluidal bombs (‘cow pie’, ‘ribbon’, ‘rope/spindle’) show a clear trend in decreasing size with distance from vent, whereas the size-distance trend is less dramatic for the aerodynamic bombs.
Tecolote Volcano in the Pinacate Volcanic Field in Mexico contains multiple vents within a horseshoe-shaped crater that have all produced various ejecta (Zawacki et al. 2019). The objectives of this research are to map ballistic distribution to understand the relationship between the source vent or vents and the bombs and ballistics that litter the region around Tecolote, and interpret the eruption conditions that ejected those bombs by using their distributions, morphologies, and fine-scale textures.
The findings of this work are that these bombs are apparently from the last stages of the eruption, succeeding the final lava flows. The interiors and exteriors of the bombs display different cooling rates which can are indicated by the fabric found within. Using this, certain characteristics of the bombs during eruption were extrapolated. The ‘cow pie’ bombs were determined to be the least viscous or contained a higher gas content at the time of eruption. Whereas the ribbon/rope bombs were determined to be the most viscous or contained a lesser gas content. Looking at the Southern Bomb Field site, it is dominated by large bombs that were during flight were molded into aerodynamic shapes. The Eastern Rim site is dominated by smaller bombs that appeared to be more liquid during the eruption. This difference in the two sites is a probable indication of at least two different eruptive events of different degrees of explosivity. Overall, aerodynamic bombs are more common and extend to greater distances from the presumed vent (up to 800 m), while very fluidal bombs are uncommon beyond 500 meters. Fluidal bombs (‘cow pie’, ‘ribbon’, ‘rope/spindle’) show a clear trend in decreasing size with distance from vent, whereas the size-distance trend is less dramatic for the aerodynamic bombs.
ContributorsWest, Jacob Alexander (Co-author) / West, Jacob (Co-author) / Clarke, Amanda (Thesis director) / Arrowsmith, Ramon (Committee member) / Roggensack, Kurt (Committee member) / School of Earth and Space Exploration (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Among the deadliest of explosive volcanic hazards are pyroclastic surges – fast-moving, hot, dilute ground-hugging currents that overtop topography and leave complex deposits. Understanding the link between surge dynamics and their deposits is crucial for forecasting the impacts of future eruptions. To investigate surges, two sets of scaled laboratory experiments were conducted. Set 1 released fluid pulses into less-dense ambient water (3-m flume). Pulse fluids were saline solutions with and without particles, and alcohol-water-particle mixtures. Non-dimensional numbers are calculated using both input parameters and measured outcomes. Inputs - fluid density, particle size and concentration, and volume of fluid released - were varied to explore a range of conditions. Key output parameters obtained by video analysis are flow thickness and propagation velocity. Propagation velocity, Re, and Ri increased with increasing pulse density, while Pn decreased. Lab Re values indicate fully turbulent flows, consistent with natural flows. Lab Ri closely matched nature and flow propagation was largely controlled by negative buoyancy, with entrainment playing a minor role. All flows began as subcritical (Fr<1). Alcohol-water-particle runs exhibited buoyancy reversals caused by particle sedimentation, characterized by gradual deceleration and late-stage formation of buoyant plumes. Saline runs maintained nearly constant velocities. In the second set of experiments, alcohol-water-particle mixtures were pulsed over particle bed. Various substrate topographies were tested (flat, mound-trough sequences, steps, wedges). Deposits thickened in troughs and thinned on peaks. Progressive climbing dunes formed on the lee side of the second peak of double peaks and peak-trough combinations, and in step-up topographies. Regressive climbing dunes formed on the stoss side of the first peak of peak-trough combinations and step-down topographies, and on the stoss side of mounds. Climb angles were 16 to 36°, consistent with those documented in pyroclastic surge deposits. The occurrence of both regressive and progressive climbing dunes suggests localized transitions between subcritical and supercritical flow. No cross-beds formed on flat substrates, suggesting that complex substrate topography is required for bedforms to occur in nature. A code benchmarking effort is underway in which targeted model runs will be compared to both sets of experiments in order to develop comprehensive hazards prediction tool.
ContributorsRagavan, Rupa (Author) / Clarke, Amanda (Thesis advisor) / Semken, Steven (Committee member) / Roggensack, Kurt (Committee member) / de'Michieli Vitturi, Mattia (Committee member) / Arizona State University (Publisher)
Created2023
Description
During explosive eruptions, airborne particles collide and stick together, accelerating the fallout of volcanic ash and climate-forcing aerosols. This aggregation process remains a major source of uncertainty both in ash dispersal forecasting and interpretation of eruptions from the geological record. Here we illuminate the mechanisms and timescales of particle aggregation from a well-characterized ‘wet’ eruption. The 2009 eruption of Redoubt Volcano, Alaska, incorporated water from the surface (in this case, a glacier), which is a common occurrence during explosive volcanism worldwide. Observations from C-band weather radar, fall deposits and numerical modelling demonstrate that hail-forming processes in the eruption plume triggered aggregation of ∼95% of the fine ash and stripped much of the erupted mass out of the atmosphere within 30 min. Based on these findings, we propose a mechanism of hail-like ash aggregation that contributes to the anomalously rapid fallout of fine ash and occurrence of concentrically layered aggregates in volcanic deposits.
ContributorsVan Eaton, Alexa (Author) / Mastin, Larry G. (Author) / Herzog, Michael (Author) / Schwaiger, Hans F. (Author) / Schneider, David J. (Author) / Wallace, Kristi L. (Author) / Clarke, Amanda (Author) / College of Liberal Arts and Sciences (Contributor)
Created2015-08-03