Matching Items (5)
Description
The overall objective of this project is to optimize the development of magnetic ferrite thin films targeted for enabling low-loss broadband communication devices, miniaturized low-microwave inductors and electromagnetic noise suppressors. The focus of this objective is to design and build a reactor and improve the spin-spray process. Each film is then characterized and optimized to have a high permeability and high frequency in the range of 500 MHz - 3 GHz. Films produced by the µ-droplet deposition regime yields a higher Snoek's product than the continuous liquid layer regime. The highest Snoek's product occurs when it is deposited at an oxidant pH of 8.28. The Ni-Zn-Co ferrite magnetic domains were imaged using the Lorentz TEM in which multi-grain domains are experimentally observed for the first time.
ContributorsRay, Nicole M (Author) / Petuskey, William T. (Thesis advisor) / Diaz, Rodolfo E. (Committee member) / Chamberlin, Ralph V. (Committee member) / Arizona State University (Publisher)
Created2013
Description
Silicon nanowires were grown epitaxially on Si (100) and (111) surfaces using the Vapor-Liquid-Solid (VLS) mechanism under both thermal and plasma enhanced growth conditions. Nanowire morphology was investigated as a function of temperature, time, disilane partial pressure and substrate preparation. Silicon nanowires synthesized in low temperature plasma typically curved compared to the linear nanowires grown under simple thermal conditions. The nanowires tended bend more with increasing disilane partial gas pressure up to 25 x10-3 mTorr. The nanowire curvature measured geometrically is correlated with the shift of the main silicon peak obtained in Raman spectroscopy. A mechanistic hypothesis was proposed to explain the bending during plasma activated growth. Additional driving forces related to electrostatic and Van der Waals forces were also discussed. Deduced from a systematic variation of a three-step experimental protocol, the mechanism for bending was associated with asymmetric deposition rate along the outer and inner wall of nanowire. The conditions leading to nanowire branching were also examined using a two-step growth process. Branching morphologies were examined as a function of plasma powers between 1.5 W and 3.5 W. Post-annealing thermal and plasma-assisted treatments in hydrogen were compared to understand the influences in the absence of an external silicon source (otherwise supplied by disilane). Longer and thicker nanowires were associated with longer annealing times due to an Ostwald-like ripening effect. The roles of surface diffusion, gas diffusion, etching and deposition rates were examined.
ContributorsJoun, Hee-Joung (Author) / Petuskey, William T. (Thesis advisor) / Drucker, Jeff (Committee member) / Chizmeshya, Andrew (Committee member) / Arizona State University (Publisher)
Created2011
Description
The rigidity of a material is the property that enables it to preserve its structure when deformed. In a rigid body, no internal motion is possible since the degrees of freedom of the system are limited to translations and rotations only. In the macroscopic scale, the rigidity and response of a material to external load can be studied using continuum elasticity theory. But when it comes to the microscopic scale, a simple yet powerful approach is to model the structure of the material and its interparticle interactions as a ball$-$and$-$spring network. This model allows a full description of rigidity in terms of the vibrational modes and the balance between degrees of freedom and constraints in the system.
In the present work, we aim to establish a microscopic description of rigidity in \emph{disordered} networks. The studied networks can be designed to have a specific number of degrees of freedom and/or elastic properties. We first look into the rigidity transition in three types of networks including randomly diluted triangular networks, stress diluted triangular networks and jammed networks. It appears that the rigidity and linear response of these three types of systems are significantly different. In particular, jammed networks display higher levels of self-organization and a non-zero bulk modulus near the transition point. This is a unique set of properties that have not been observed in any other types of disordered networks. We incorporate these properties into a new definition of jamming that requires a network to hold one extra constraint in excess of isostaticity and have a finite non-zero bulk modulus. We then follow this definition by using a tuning by pruning algorithm to build spring networks that have both these properties and show that they behave exactly like jammed networks. We finally step into designing new disordered materials with desired elastic properties and show how disordered auxetic materials with a fully convex geometry can be produced.
In the present work, we aim to establish a microscopic description of rigidity in \emph{disordered} networks. The studied networks can be designed to have a specific number of degrees of freedom and/or elastic properties. We first look into the rigidity transition in three types of networks including randomly diluted triangular networks, stress diluted triangular networks and jammed networks. It appears that the rigidity and linear response of these three types of systems are significantly different. In particular, jammed networks display higher levels of self-organization and a non-zero bulk modulus near the transition point. This is a unique set of properties that have not been observed in any other types of disordered networks. We incorporate these properties into a new definition of jamming that requires a network to hold one extra constraint in excess of isostaticity and have a finite non-zero bulk modulus. We then follow this definition by using a tuning by pruning algorithm to build spring networks that have both these properties and show that they behave exactly like jammed networks. We finally step into designing new disordered materials with desired elastic properties and show how disordered auxetic materials with a fully convex geometry can be produced.
ContributorsFaghir Hagh, Varda (Author) / Thorpe, Michael F. (Thesis advisor) / Beckstein, Oliver (Committee member) / Chamberlin, Ralph V. (Committee member) / Schmidt, kevin E. (Committee member) / Arizona State University (Publisher)
Created2018
Description
Metalloporphyrins represent a class of molecular electrocatalysts for driving energy relevant half-reactions, including hydrogen evolution and carbon dioxide reduction. As electrocatalysts, they provide a strategy, and potential structural component, for linking renewable energy sources with the production of fuels and other value-added chemicals. In this work, porphyrins are used as structural motifs for exploring structure-function relationships in electrocatalysis and as molecular building blocks for assembling photoelectrochemical assemblies leveraging the light capture and conversion properties of a gallium phosphide (GaP) semiconductor. These concepts are further covered in Chapter 1. A direct one-step method to chemically graft metalloporphyrins to GaP surfaces is described in Chapter 2. Structural characterization of the hybrid assemblies is achieved using surface-sensitive spectroscopic methods, and functional performance for photoinduced hydrogen production is demonstrated via three-electrode electrochemical measurement combined with product analysis using gas chromatography. In Chapter 3, preparation of a novel cobalt porphyrin modified with 3-fluorophenyl groups at all four meso-positions of the porphyrin ring and a single 4-vinylphenyl surface attachment group at one of the β-positions is described. Electrochemical measurements show the 3-fluorophenyl groups perturb the reduction potentials of the complex to more positive values as compared to non-fluorinated analogs, illustrating synthetic control over the redox properties of the catalysts. The use of grazing angle attenuated total reflectance Fourier transform infrared spectroscopy to characterize chemically modified GaP surfaces containing grafted cobalt fluoro-porphyrins is presented in Chapter 4. In these hybrid constructs, porphyrin surface attachment is achieved using either a two-step method involving coordination of cobalt fluoro-porphyrin metal centers to nitrogen sites on an initially applied thin-film polypyridyl surface coating, or via a direct modification strategy using a cobalt fluoro-porphyrin precursor bearing a covalently bonded 4- vinylphenyl surface attachment group. Finally, Chapter 5 describes binuclear copper porphyrins in which two copper porphyrin macrocycles are doubly fused at the meso-β positions are shown to be active electrocatalysts for the hydrogen evolution reaction. The enhancement in catalytic performance over analogous non-fused copper porphyrins indicates extended macrocycles provide an advantageous structural motif and design element for preparing electrocatalysts that activate small molecules of consequence to renewable energy.
ContributorsKhusnutdinova, Diana (Author) / Moore, Gary F. (Thesis advisor) / Moore, Ana L. (Committee member) / Petuskey, William T. (Committee member) / Arizona State University (Publisher)
Created2019
Description
The research of this dissertation has involved the nanoscale quantitative characterization of patterned magnetic nanostructures and devices using off-axis electron holography and Lorentz microscopy. The investigation focused on different materials of interest, including monolayer Co nanorings, multilayer Co/Cu/Py (Permalloy, Ni81Fe19) spin-valve nanorings, and notched Py nanowires, which were fabricated via a standard electron-beam lithography (EBL) and lift-off process. Magnetization configurations and reversal processes of Co nanorings, with and without slots, were observed. Vortex-controlled switching behavior with stepped hysteresis loops was identified, with clearly defined onion states, vortex states, flux-closure (FC) states, and Omega states. Two distinct switching mechanisms for the slotted nanorings, depending on applied field directions relative to the slot orientations, were attributed to the vortex chirality and shape anisotropy. Micromagnetic simulations were in good agreement with electron holography observations of the Co nanorings, also confirming the switching field of 700-800 Oe. Co/Cu/Py spin-valve slotted nanorings exhibited different remanent states and switching behavior as a function of the different directions of the applied field relative to the slots. At remanent state, the magnetizations of Co and Py layers were preferentially aligned in antiparallel coupled configuration, with predominant configurations in FC or onion states. Two-step and three-step hysteresis loops were quantitatively determined for nanorings with slots perpendicular, or parallel to the applied field direction, respectively, due to the intrinsic coercivity difference and interlayer magnetic coupling between Co and Py layers. The field to reverse both layers was on the order of ~800 Oe. Domain-wall (DW) motion within Py nanowires (NWs) driven by an in situ magnetic field was visualized and quantified. Different aspects of DW behavior, including nucleation, injection, pinning, depinning, relaxation, and annihilation, occurred depending on applied field strength. A unique asymmetrical DW pinning behavior was recognized, depending on DW chirality relative to the sense of rotation around the notch. The transverse DWs relaxed into vortex DWs, followed by annihilation in a reversed field, which was in agreement with micromagnetic simulations. Overall, the success of these studies demonstrated the capability of off-axis electron holography to provide valuable insights for understanding magnetic behavior on the nanoscale.
ContributorsHe, Kai (Author) / McCartney, Martha R. (Thesis advisor) / Smith, David J. (Thesis advisor) / Chamberlin, Ralph V. (Committee member) / Crozier, Peter A. (Committee member) / Drucker, Jeff (Committee member) / Arizona State University (Publisher)
Created2010