Matching Items (1,107)
Filtering by
- Creators: Department of Psychology
- Member of: Theses and Dissertations
- Resource Type: Text
Description
Engineering is a multidisciplinary field with a variety of applications. However, since there are so many disciplines of engineering, it is often challenging to find the discipline that best suits an individual interested in engineering. Not knowing which area of engineering most aligns to one’s interests is challenging when deciding on a major and a career. With the development of the Engineering Interest Quiz (EIQ), the goal was to help individuals find the field of engineering that is most similar to their interests. Initially, an Engineering Faculty Survey (EFS) was created to gather information from engineering faculty at Arizona State University (ASU) and to determine keywords that describe each field of engineering. With this list of keywords, the EIQ was developed. Data from the EIQ compared the engineering students’ top three results for the best engineering discipline for them with their current engineering major of study. The data analysis showed that 70% of the respondents had their major listed as one of the top three results they were given and 30% of the respondents did not have their major listed. Of that 70%, 64% had their current major listed as the highest or tied for the highest percentage and 36% had their major listed as the second or third highest percentage. Furthermore, the EIQ data was compared between genders. Only 33% of the male students had their current major listed as their highest percentage, but 55% had their major as one of their top three results. Women had higher percentages with 63% listing their current major as their highest percentage and 81% listing it in the top three of their final results.
ContributorsWagner, Avery Rose (Co-author) / Lucca, Claudia (Co-author) / Taylor, David (Thesis director) / Miller, Cindy (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The impact of physical/chemical properties of gray water on microbial inactivation in gray water using chlorine was investigated through creating artificial gray water in lab, varying specific components, and then measuring microbial inactivation. Gray water was made through taking autoclaved nanopure water, and increasing the concentration of surfacants, the turbidity, the concentration of organic content, and spiking E. coli grown in tryptic soy broth (TSB); chlorine was introduced using Clorox Disinfecting Bleach2. Bacteria was detected using tryptic soy agar (TSA), and E. coli was specifically detected using the selective media, brilliance. The log inactivation of bacteria detected using TSA was shown to be inversely related to the turbidity of the solution. Complete inactivation of E. coli concentrations between 104-105 CFU/100 ml in gray water with turbidities between 10-100 NTU, 0.1-0.5 mg/L of humic acid, and 0.1 ml of Dawn Ultra, was shown to occur, as detected by brilliance, at chlorine concentrations of 1-2 mg/L within 30 seconds. These result in concentration time (CT) values between 0.5-1 mg/L·min. Under the same gray water conditions, and an E. coli concentration of 104 CFU/100 ml and a chlorine concentration of 0.01 mg/L, complete inactivation was shown to occur in all trials within two minutes. These result in CT values ranging from 0.005 to 0.02. The turbidity and humic acid concentration were shown to be inversely related to the log inactivation and directly related to the CT value. This study shows that chlorination is a valid method of treatment of gray water for certain irrigation reuses.
ContributorsGreenberg, Samuel Gabe (Author) / Abbaszadegan, Morteza (Thesis director) / Schoepf, Jared (Committee member) / Alum, Absar (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Increasing energy and environmental problems describe the need to develop renewable chemicals and fuels. Global research has been targeting using microbial systems on a commercial scale for synthesis of valuable compounds. The goal of this project was to refactor and overexpress b6-f complex proteins in cyanobacteria to improve photosynthesis under dynamic light conditions. Improvement in the photosynthetic system can directly relate to higher yields of valuable compounds such as carotenoids and higher yields of biomass which can be used as energy molecules. Four engineered strains of cyanobacteria were successfully constructed and overexpressed the corresponding four large subunits in the cytochrome b6-f complex. No significant changes were found in cell growth or pigment titer in the modified strains compared to the wild type. The growth assay will be performed at higher and/or dynamic light intensities including natural light conditions for further analysis.
ContributorsNauroth, Benjamin (Author) / Varman, Arul (Thesis director) / Singharoy, Abhishek (Committee member) / Li, Han (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Many factors are at play within the genome of an organism, contributing to much of the diversity and variation across the tree of life. While the genome is generally encoded by four nucleotides, A, C, T, and G, this code can be expanded. One particular mechanism that we examine in this thesis is modification of bases—more specifically, methylation of Adenine (m6A) within the GATC motif of Escherichia coli. These methylated adenines are especially important in a process called methyl-directed mismatch repair (MMR), a pathway responsible for repairing errors in the DNA sequence produced by replication. In this pathway, methylated adenines identify the parent strand and direct the repair proteins to correct the erroneous base in the daughter strand. While the primary role of methylated adenines at GATC sites is to direct the MMR pathway, this methylation has also been found to affect other processes, such as gene expression, the activity of transposable elements, and the timing of DNA replication. However, in the absence of MMR, the ability of these other processes to maintain adenine methylation and its targets is unknown.
To determine if the disruption of the MMR pathway results in the reduced conservation of methylated adenines as well as an increased tolerance for mutations that result in the loss or gain of new GATC sites, we surveyed individual clones isolated from experimentally evolving wild-type and MMR-deficient (mutL- ;conferring an 150x increase in mutation rate) populations of E. coli with whole-genome sequencing. Initial analysis revealed a lack of mutations affecting methylation sites (GATC tetranucleotides) in wild-type clones. However, the inherent low mutation rates conferred by the wild-type background render this result inconclusive, due to a lack of statistical power, and reveal a need for a more direct measure of changes in methylation status. Thus as a first step to comparative methylomics, we benchmarked four different methylation-calling pipelines on three biological replicates of the wildtype progenitor strain for our evolved populations.
While it is understood that these methylated sites play a role in the MMR pathway, it is not fully understood the full extent of their effect on the genome. Thus the goal of this thesis was to better understand the forces which maintain the genome, specifically concerning m6A within the GATC motif.
To determine if the disruption of the MMR pathway results in the reduced conservation of methylated adenines as well as an increased tolerance for mutations that result in the loss or gain of new GATC sites, we surveyed individual clones isolated from experimentally evolving wild-type and MMR-deficient (mutL- ;conferring an 150x increase in mutation rate) populations of E. coli with whole-genome sequencing. Initial analysis revealed a lack of mutations affecting methylation sites (GATC tetranucleotides) in wild-type clones. However, the inherent low mutation rates conferred by the wild-type background render this result inconclusive, due to a lack of statistical power, and reveal a need for a more direct measure of changes in methylation status. Thus as a first step to comparative methylomics, we benchmarked four different methylation-calling pipelines on three biological replicates of the wildtype progenitor strain for our evolved populations.
While it is understood that these methylated sites play a role in the MMR pathway, it is not fully understood the full extent of their effect on the genome. Thus the goal of this thesis was to better understand the forces which maintain the genome, specifically concerning m6A within the GATC motif.
ContributorsBoyer, Gwyneth (Author) / Lynch, Michael (Thesis director) / Behringer, Megan (Committee member) / Geiler-Samerotte, Kerry (Committee member) / School of Life Sciences (Contributor) / Department of Psychology (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
This paper emphasizes how vital prosthetic devices are as tools for both congenital and acquired amputees in order to maximize this population's level of societal productivity, but several issues exist with the current technological focus of development by the prosthetic industry that creates unnecessary hurdles that amputees must surpass in order to truly benefit from these tools. The first major issue is that these devices are not readily available to all amputees. The astronomical cost of most prosthetic devices is a variable that restricts low income amputee populations from obtaining these vital tools regardless of their level of need, thus highlighting the fact that amputees who are not financially stable are not supported in a fashion that is conducive to their success. Also, cost greatly affects children who suffer from a missing appendage due to the fact that they are in constant need of prosthetic replacement because of physical growth and development. Another issue with the current focus of the prosthetic industry is that it focuses on acquired amputees because this population is much larger in comparison to congenital amputees and thus more lucrative. Congenital amputees' particular needs are often entirely ignored in terms of prosthetic innovation. Finally, low daily utilization is a major issue amongst the amputee population. Several variables exist with the use of prosthetic devices that cause many amputees to decide against the utilization of these tools, like difficulty of use and lack of comfort. This paper will provide solutions to cost, discrimination, issues in development, and daily utilization by emphasizing on how lowering the cost through alternative designs and materials, transitioning the focus of technological development onto the entire amputee population rather than targeting the most lucrative group, and advancing the design in a fashion to which promotes daily utilization will provide the largest level of societal support, so that the amputee population as a whole can maximize their level of productivity in a manner that will allow this group to conquer the hardships that are introduced into their lives due to a missing appendage.
ContributorsO'Connor, Casey Charles (Author) / Popova, Laura (Thesis director) / Graff, Sarah (Committee member) / Department of Psychology (Contributor) / School of Social Work (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This research investigated deionized water contact angle measurement reliability with alumina powder using the Washburn method. This method relates the capillary rise of a liquid through a column of packed powder to the contact angle of the system. A reference liquid that is assumed to be perfectly wetting, such as hexane due to the low surface energy, must be used to compare to the tested liquid. Consistency was hypothesized to be achieved with more powder structure and consistency of packing between reference and test trials. The three types of packing structures explored in this study were unstructured, visually-structured (user tapped), and machine-structured tapping. It was also hypothesized that similar contact angle results would be found for different packing methods of the same powder and liquid. However, the average contact angle for unstructured packing was found to be 32.9°, while the angle for the tapped structure was only 11.7°. This large deviation between types of packing shows that there are more inconsistencies with the use of this method than just the regulation of the packing structure. There were two similar glass chromatography columns used, but the second column experienced an unknown interference that led to a delay in the hexane uptake into the powder, which then led to invalid contact angle calculations. There was no discernible relationship between the packing structure and the standard deviation between trials, so the more structured packing does not seem to affect the consistency of results. It is recommended to perform more experiments on a single packing type with different apparatuses and a narrower particle size range.
ContributorsConvery, Brittany Alexis (Author) / Emady, Heather (Thesis director) / Vajrala, Spandana (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
This study examines Glamour magazine to determine the messages the publication sends to its readers and to evaluate if such messages align with modern feminist goals. The articles of Glamour's 12 issues from the year of 2016 are analyzed using a framework adapted from previous research on women's magazines. Articles are coded as either positive (feminist, anti-traditional, promotes equality) or negative (anti-feminist, traditional, promotes inequality). Distinct content themes (appearance, dating, home, self-development, career development, politics/world issues, and entertainment) are also examined individually. After the presentation of data, I examine my findings through a feminist lens to determine the nature of the messages being sent to women through the magazine's editorial content, followed by an assessment of the value of women's magazines and how they could potentially shape the beliefs and roles of a 2017 woman. It is found that about half of the articles in Glamour could be considered as having feminist messages, with strong themes of personal choice, individual empowerment, and political involvement or activism in these articles and throughout the magazine. The content also has many blatantly feminist messages, including consistent use of the word itself. Another 40% of the articles are found to be neutral (no clear message to reader), and the remaining are negative. The sexism inherent in these negative articles is critically examined. Finally, the main takeaways of the findings and their ramifications are discussed from both a media consumer and a media producer perspective, with arguments for why it is important to be critical of a magazine's editorial content.
ContributorsAllnatt, Libby Paige (Author) / Pucci, Jessica (Thesis director) / Dove-Viebahn, Aviva (Committee member) / School of Social Transformation (Contributor) / Department of Psychology (Contributor) / Walter Cronkite School of Journalism and Mass Communication (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
Spousal loss is a common, significant life event that can negatively affect multiple facets of individual health and psychological adjustment. Social support is one factor that is shown to improve adjustment following spousal loss, but much less is known regarding which facet of social support is most predictive of positive adjustment outcomes following spousal loss. This study examined the course of changes in mental health and well-being following spousal loss and which facets of social support are associated with better outcomes following spousal loss. Latent growth curve modeling was applied to data from 265 widowed individuals, ages 65 and older, across four assessments (baseline, and 6-, 18-, and 48- months following spousal loss). I examined the following research questions: (1) adjustment following spousal loss will follow a trajectory of an increase in depressive symptoms and anxiety and decrease in well-being with a leveling-off over time, with between-person differences, and (2) emotional support and instrumental support given will lead to more positive adjustment outcomes over time. Depressive symptoms followed the hypothesized trajectory but anxiety and well-being showed relative stability before and after spousal loss. Instrumental support was the most beneficial facet of social support, such that receiving more instrumental support was associated with lower levels of depressive symptoms and anxiety 6-months following spousal loss. Giving more instrumental support led to an increase in well-being following spousal loss. Instrumental support given and received led to increases in well-being as a function of spousal loss. The discussion focuses on whether and how these findings can help to identify ways through which support and help can be given to individuals to improve adjustment to spousal loss and fully recover.
ContributorsSullivan, Colleen Elizabeth (Author) / Infurna, Frank (Thesis director) / Luthar, Suniya (Committee member) / Davis, Mary (Committee member) / Department of Psychology (Contributor) / School of International Letters and Cultures (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
Effortful Control (EC) is a person's ability to self-regulate when presented with an environmental stimulus (Rothbart, et al., 2003). It has been well-established that high levels of EC are associated with multiple positive social and academic outcomes in adolescence (Spinrad et al., 2009). Research suggests that parents have a strong impact on numerous child outcomes, such as EC, through both genetic and environmental pathways. Past research has also examined how parents diagnosed with psychopathology contribute to maladaptive outcomes in their children, including poor regulation, through both genetic and environmental processes (Ellis, et al., 1997). However, less is known about the longitudinal effects of parent dysfunction on the child's environment and regulatory abilities and potential mediators of those effects. The current study tested the hypotheses that parent Alcohol Use Disorder (AUD) would specifically predict early adversity, biological mother conscientiousness, and child EC longitudinally and that early adversity and biological mother conscientiousness would predict child EC. Participants were from a longitudinal study of familial alcoholism (N = 195). Regression analyses indicated that parent AUD was not specifically associated with child EC or with biological mother conscientiousness. However, parent AUD was related to higher levels of early adversity. Additionally, biological mother conscientiousness was associated with higher levels of child EC and early adversity was associated with lower levels of child EC when controlling for earlier EC. Given these findings, future research should test mediation models in which parent AUD predicts child EC indirectly through early adversity.
ContributorsRuof, Ariana Kelsey (Author) / Chassin, Laurie (Thesis director) / Elam, Kit (Committee member) / Davis, Mary (Committee member) / Department of Psychology (Contributor) / Sanford School of Social and Family Dynamics (Contributor) / Barrett, The Honors College (Contributor)
Created2017-12
Description
The Experimental Data Processing (EDP) software is a C++ GUI-based application to streamline the process of creating a model for structural systems based on experimental data. EDP is designed to process raw data, filter the data for noise and outliers, create a fitted model to describe that data, complete a probabilistic analysis to describe the variation between replicates of the experimental process, and analyze reliability of a structural system based on that model. In order to help design the EDP software to perform the full analysis, the probabilistic and regression modeling aspects of this analysis have been explored. The focus has been on creating and analyzing probabilistic models for the data, adding multivariate and nonparametric fits to raw data, and developing computational techniques that allow for these methods to be properly implemented within EDP. For creating a probabilistic model of replicate data, the normal, lognormal, gamma, Weibull, and generalized exponential distributions have been explored. Goodness-of-fit tests, including the chi-squared, Anderson-Darling, and Kolmogorov-Smirnoff tests, have been used in order to analyze the effectiveness of any of these probabilistic models in describing the variation of parameters between replicates of an experimental test. An example using Young's modulus data for a Kevlar-49 Swath stress-strain test was used in order to demonstrate how this analysis is performed within EDP. In order to implement the distributions, numerical solutions for the gamma, beta, and hypergeometric functions were implemented, along with an arbitrary precision library to store numbers that exceed the maximum size of double-precision floating point digits. To create a multivariate fit, the multilinear solution was created as the simplest solution to the multivariate regression problem. This solution was then extended to solve nonlinear problems that can be linearized into multiple separable terms. These problems were solved analytically with the closed-form solution for the multilinear regression, and then by using a QR decomposition to solve numerically while avoiding numerical instabilities associated with matrix inversion. For nonparametric regression, or smoothing, the loess method was developed as a robust technique for filtering noise while maintaining the general structure of the data points. The loess solution was created by addressing concerns associated with simpler smoothing methods, including the running mean, running line, and kernel smoothing techniques, and combining the ability of each of these methods to resolve those issues. The loess smoothing method involves weighting each point in a partition of the data set, and then adding either a line or a polynomial fit within that partition. Both linear and quadratic methods were applied to a carbon fiber compression test, showing that the quadratic model was more accurate but the linear model had a shape that was more effective for analyzing the experimental data. Finally, the EDP program itself was explored to consider its current functionalities for processing data, as described by shear tests on carbon fiber data, and the future functionalities to be developed. The probabilistic and raw data processing capabilities were demonstrated within EDP, and the multivariate and loess analysis was demonstrated using R. As the functionality and relevant considerations for these methods have been developed, the immediate goal is to finish implementing and integrating these additional features into a version of EDP that performs a full streamlined structural analysis on experimental data.
ContributorsMarkov, Elan Richard (Author) / Rajan, Subramaniam (Thesis director) / Khaled, Bilal (Committee member) / Chemical Engineering Program (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Ira A. Fulton School of Engineering (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05