Matching Items (18)
Filtering by

Clear all filters

152054-Thumbnail Image.png
Description
Solar system orbital dynamics can offer unique challenges. Impacts of interplanetary dust particles can significantly alter the surfaces of icy satellites and minor planets. Impact heating from these particles can anneal away radiation damage to the crystalline structure of surface water ice. This effect is enhanced by gravitational focusing for

Solar system orbital dynamics can offer unique challenges. Impacts of interplanetary dust particles can significantly alter the surfaces of icy satellites and minor planets. Impact heating from these particles can anneal away radiation damage to the crystalline structure of surface water ice. This effect is enhanced by gravitational focusing for giant planet satellites. In addition, impacts of interplanetary dust particles on the small satellites of the Pluto system can eject into the system significant amounts of secondary intra-satellite dust. This dust is primarily swept up by Pluto and Charon, and could explain the observed albedo features on Pluto's surface. In addition to Pluto, a large fraction of trans-neptunian objects (TNOs) are binary or multiple systems. The mutual orbits of these TNO binaries can range from very wide (periods of several years) to near-contact systems (less than a day period). No single formation mechanism can explain this distribution. However, if the systems generally formed wide, a combination of solar and body tides (commonly called Kozai Cycles-Tidal Friction, KCTF) can cause most systems to tighten sufficiently to explain the observed distributions. This KCTF process can also be used to describe the orbital evolution of a terrestrial-class exoplanet after being captured as a satellite of a habitable-zone giant exoplanet. The resulting exomoon would be both potentially habitable and potenially detectable in the full Kepler data set.
ContributorsPorter, Simon Bernard (Author) / Desch, Steven (Thesis advisor) / Zolotov, Mikhail (Committee member) / Timmes, Francis (Committee member) / Scannapieco, Evan (Committee member) / Robinson, Mark (Committee member) / Arizona State University (Publisher)
Created2013
151756-Thumbnail Image.png
Description
Galaxies represent a fundamental catalyst in the ``lifecycle'' of matter in the Universe, and the study of galaxy assembly and evolution provides unique insight into the physical processes governing the transformation of matter from atoms to gas to stars. With the Hubble Space Telescope, the astrophysical community is able to

Galaxies represent a fundamental catalyst in the ``lifecycle'' of matter in the Universe, and the study of galaxy assembly and evolution provides unique insight into the physical processes governing the transformation of matter from atoms to gas to stars. With the Hubble Space Telescope, the astrophysical community is able to study the formation and evolution of galaxies, at an unrivaled spatial resolution, over more than 90% of cosmic time. Here, I present results from two complementary studies of galaxy evolution in the local and intermediate redshift Universe which used new and archival HST images. First, I use archival broad-band HST WFPC2 optical images of local (d<63 Mpc) Seyfert-type galaxies to test the observed correlation between visually-classified host galaxy dust morphology and AGN class. Using quantitative parameters for classifying galaxy morphology, I do not measure a strong correlation between the galaxy morphology and AGN class. This result could imply that the Unified Model of AGN provides a sufficient model for the observed diversity of AGN, but this result could also indicate the quantitative techniques are insufficient for characterizing the dust morphology of local galaxies. To address the latter, I develop a new automated method using an inverse unsharp masking technique coupled to Source Extractor to detect and measure dust morphology. I measure no strong trends with dust-morphology and AGN class using this method, and conclude that the Unified Model remains sufficient to explain the diversity of AGN. Second, I use new UV-optical-near IR broad-band images obtained with the HST WFC3 in the Early Release Science (ERS) program to study the evolution of massive, early-type galaxies. These galaxies were once considered to be ``red and dead'', as a class uniformly devoid of recent star formation, but observations of these galaxies in the local Universe at UV wavelengths have revealed a significant fraction (30%) of ETGs to have recently formed a small fraction (5-10%) of their stellar mass in young stars. I extend the study of recent star formation in ETGs to intermediate-redshift 0.35<1.5 with the ERS data. Comparing the mass fraction and age of young stellar populations identified in these ETGs from two-component SED analysis with the morphology of the ETG and the frequency of companions, I find that at this redshift many ETGs are likely to have experienced a minor burst of recent star formation. The mechanisms driving this recent star formation are varied, and evidence for both minor merger driven recent star formation as well as the evolution of transitioning ETGs is identified.
ContributorsRutkowski, Michael (Author) / Windhorst, Rogier A. (Thesis advisor) / Bowman, Judd (Committee member) / Butler, Nathaniel (Committee member) / Desch, Steven (Committee member) / Young, Patrick (Committee member) / Arizona State University (Publisher)
Created2013
152707-Thumbnail Image.png
Description
As the detection of planets become commonplace around our neighboring stars, scientists can now begin exploring their possible properties and habitability. Using statistical analysis I determine a true range of elemental compositions amongst local stars and how this variation could affect possible planetary systems. Through calculating and analyzing the variation

As the detection of planets become commonplace around our neighboring stars, scientists can now begin exploring their possible properties and habitability. Using statistical analysis I determine a true range of elemental compositions amongst local stars and how this variation could affect possible planetary systems. Through calculating and analyzing the variation in elemental abundances of nearby stars, the actual range in stellar abundances can be determined using statistical methods. This research emphasizes the diversity of stellar elemental abundances and how that could affect the environment from which planets form. An intrinsic variation has been found to exist for almost all of the elements studied by most abundance-finding groups. Specifically, this research determines abundances for a set of 458 F, G, and K stars from spectroscopic planet hunting surveys for 27 elements, including: C, O, Na, Mg, Al, Si, S, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Mo, Ba, La, Ce, Nd, Eu, and Hf. Abundances of the elements in many known exosolar planet host stars are calculated for the purpose investigating new ways to visualize how stellar abundances could affect planetary systems, planetary formation, and mineralogy. I explore the Mg/Si and C/O ratios as well as place these abundances on ternary diagrams with Fe. Lastly, I emphasize the unusual stellar abundance of τ Ceti. τ Ceti is measured to have 5 planets of Super-Earth masses orbiting in near habitable zone distances. Spectroscopic analysis finds that the Mg/Si ratio is extremely high (~2) for this star, which could lead to alterations in planetary properties. τ Ceti's low metallicity and oxygen abundance account for a change in the location of the traditional habitable zone, which helps clarify a new definition of habitable planets.
ContributorsPagano, Michael (Author) / Young, Patrick (Thesis advisor) / Shim, Sang-Heon (Committee member) / Patience, Jennifer (Committee member) / Desch, Steven (Committee member) / Anbar, Ariel (Committee member) / Arizona State University (Publisher)
Created2014
156961-Thumbnail Image.png
Description
The pace of exoplanet discoveries has rapidly accelerated in the past few decades and the number of planets with measured mass and radius is expected to pick up in the coming years. Many more planets with a size similar to earth are expected to be found. Currently, software for characterizing

The pace of exoplanet discoveries has rapidly accelerated in the past few decades and the number of planets with measured mass and radius is expected to pick up in the coming years. Many more planets with a size similar to earth are expected to be found. Currently, software for characterizing rocky planet interiors is lacking. There is no doubt that a planet’s interior plays a key role in determining surface conditions including atmosphere composition and land area. Comparing data with diagrams of mass vs. radius for terrestrial planets provides only a first-order estimate of the internal structure and composition of planets [e.g. Seager et al 2007]. This thesis will present a new Python library, ExoPlex, which has routines to create a forward model of rocky exoplanets between 0.1 and 5 Earth masses. The ExoPlex code offers users the ability to model planets of arbitrary composition of Fe-Si-Mg-Al-Ca-O in addition to a water layer. This is achieved by modeling rocky planets after the earth and other known terrestrial planets. The three distinct layers which make up the Earth's internal structure are: core, mantle, and water. Terrestrial planet cores will be dominated by iron however, like earth, there may be some quantity of light element inclusion which can serve to enhance expected core volumes. In ExoPlex, these light element inclusions are S-Si-O and are included as iron-alloys. Mantles will have a more diverse mineralogy than planet cores. Unlike most other rocky planet models, ExoPlex remains unbiased in its treatment of the mantle in terms of composition. Si-Mg-Al-Ca oxide components are combined by predicting the mantle mineralogy using a Gibbs free energy minimization software package called Perple\_X [Connolly 2009]. By allowing an arbitrary composition, ExoPlex can uniquely model planets using their host star’s composition as an indicator of planet composition. This is a proven technique [Dorn et al 2015] which has not yet been widely utilized, possibly due to the lack of availability of easy to use software. I present a model sensitivity analysis to indicate the most important parameters to constrain in future observing missions. ExoPlex is currently available on PyPI so it may be installed using pip or conda on Mac OS or Linux based operating systems. It requires a specific scripting environment which is explained in the documentation currently stored on the ExoPlex GitHub page.
ContributorsLorenzo, Alejandro M., Jr (Author) / Desch, Steven (Thesis advisor) / Shim, Dan S.-H. (Committee member) / Line, Michael (Committee member) / Li, Mingming (Committee member) / Arizona State University (Publisher)
Created2018
153639-Thumbnail Image.png
Description
The Kuiper Belt Object Haumea is one of the most fascinating objects in the solar system. Spectral reflectance observations reveal a surface of almost pure water ice, yet it has a mass of 4.006 × 1021 kg, measured from orbits of its moons, along with an inferred mean radius

The Kuiper Belt Object Haumea is one of the most fascinating objects in the solar system. Spectral reflectance observations reveal a surface of almost pure water ice, yet it has a mass of 4.006 × 1021 kg, measured from orbits of its moons, along with an inferred mean radius of 715 km, and these imply a mean density of around 2600 kg m−3. Thus the surface ice must be a veneer over a rocky core. This model is supported by observations of Haumea's light curve, which shows large photometric variations over an anomalously rapid 3.9154-hour rotational period. Haumea's surface composition is uniform, therefore the light curve must be due to a varying area presented to the observer, implying that Haumea has an oblong, ellipsoidal shape. If Haumea's rotation axis is normal to our line of sight, and Haumea reflects with a lunar-like scattering function, then its axis ratios are p = b/a = 0.80 (in the equatorial cross section) and q = c/a = 0.52 (in the polar cross section). In this work, I assume that Haumea is in hydrostatic equilibrium, and I model it as a two-phase ellipsoid with an ice mantle and a rocky core. I model the core assuming it has a given density in the range between 2700–3300 kg m−3 with axis ratios that are free to vary. The metric which my code uses calculates the angle between the gravity vector and the surface normal, then averages this over both the outer surface and the core-mantle boundary. When this fit angle is minimized, it allows an interpretation of the size and shape of the core, as well as the thickness of the ice mantle. Results of my calculations show that Haumea's most likely core density is 2700–2800 kg m−3, with ice thicknesses anywhere from 12–32 km over the poles and as thin as 4–18 km over the equator.
ContributorsProbst, Luke (Author) / Desch, Steven (Thesis advisor) / Asphaug, Erik (Committee member) / Bell, James (Committee member) / Arizona State University (Publisher)
Created2015
155890-Thumbnail Image.png
Description
The Jovian moon Europa's putative subsurface ocean offers one of the closest astrobiological targets for future exploration. It’s geologically young surface with a wide array of surface features aligned with distinct surface composition suggests past/present geophysical activity with implications for habitability. In this body of work, I propose a hypothesis

The Jovian moon Europa's putative subsurface ocean offers one of the closest astrobiological targets for future exploration. It’s geologically young surface with a wide array of surface features aligned with distinct surface composition suggests past/present geophysical activity with implications for habitability. In this body of work, I propose a hypothesis for material transport from the ocean towards the surface via a convecting ice-shell. Geodynamical modeling is used to perform numerical experiments on a two-phase water-ice system to test the hypotheses. From these models, I conclude that it is possible for trace oceanic chemistry, entrapped into the newly forming ice at the ice-ocean phase interface, to reach near-surface. This new ice is advected across the ice-shell and towards the surface affirming a dynamical possibility for material transport across the ice-ocean system, of significance to astrobiological prospecting. Next, I use these self-consistent ice-ocean models to study the thickening of ice-shell over time. Europa is subject to the immense gravity field of Jupiter that generates tidal heating within the moon. Analysis of cases with uniform and localized internal tidal heating reveal that as the ice-shell grows from a warm initial ocean, there is an increase in the size of convection cells which causes a dramatic increase in the growth rate of the ice-shell. Addition of sufficient amount of heat also results in an ice-shell at an equilibrium thickness. Localization of tidal heating as a function of viscosity controls the equilibrium thickness. These models are then used to understand how compositional heterogeneity can be created in a growing ice-shell. Impurities (e.g. salts on the surface) that enter the ice-shell get trapped in the thickening ice-shell by freezing. I show the distribution pattern of heterogeneities that can form within the ice-shell at different times. This may be of potential application in identifying the longevity and mobility of brine pockets in Europa's ice-shell which are thought to be potential habitable niches.
ContributorsAllu Peddinti, Divya (Author) / McNamara, Allen Keith (Thesis advisor) / Garnero, Edward (Committee member) / Desch, Steven (Committee member) / Zolotov, Mikhail (Committee member) / Clarke, Amanda (Committee member) / Arizona State University (Publisher)
Created2017
155222-Thumbnail Image.png
Description
The beginning of our Solar System, including events such as the formation of the first solids as well as the accretion and differentiation of planetary bodies, is recorded in meteoritic material. This record can be deciphered using petrographic, geochemical and isotopic investigations of different classes of meteorites and their components.

The beginning of our Solar System, including events such as the formation of the first solids as well as the accretion and differentiation of planetary bodies, is recorded in meteoritic material. This record can be deciphered using petrographic, geochemical and isotopic investigations of different classes of meteorites and their components. In this dissertation, I have investigated a variety of isotope systematics in chondritic and achondritic meteorites to understand processes that have shaped our Solar System. Specifically, the investigations conducted here are in two main areas: 1) Hydrogen isotope systematics in a meteorite representing the freshest known sample of the martian crust, and 2) Isotopic studies (specifically relating to high resolution chronology, nucleosynthetic anomalies and mass-dependent fractionations) in calcium-aluminum-rich inclusions, which are thought to be the earliest-formed solids in the Solar System. Chapter 1 of this dissertation presents a review of the hydrogen isotopic compositions of various planetary bodies and reservoirs in the Solar System, which could serve as tracers for the volatile sources. Chapter 2 focuses on an investigation of the hydrogen isotopic systematics in the freshest martian meteorite fall, Tissint, using the Cameca IMS-6f secondary ion mass spectrometer (SIMS). These first two chapters comprise the first part of this dissertation. The second part is comprised of chapters 3 through 6 and is focused on isotopic analyses of Calcium-Aluminum-rich Inclusions (CAIs). Chapter 3 is a review of CAIs, which record some of the earliest processes that occurred in the solar nebula. Chapter 4 presents the results of an investigation of the 26Al-26Mg short-lived chronometer (half-life ~0.72 Ma) in two CAIs and their Wark-Lovering (WL) rims from a CV3 carbonaceous chondrite using the Cameca NanoSIMS 50L. Chapter 5 is focused on the results of a study of the Zr isotope compositions of a suite of 15 CAIs from different carbonaceous chondrites using multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), in order to identify nucleosynthetic anomalies in the CAI-forming region. Chapter 6 focuses on the mass-dependent Mg isotopic compositions measured in 11 CAIs from the Allende CV3 carbonaceous chondrite using MC-ICPMS, to evaluate effects of thermal processing on CAIs.
ContributorsMane, Prajkta (Author) / Wadhwa, Meenakshi (Thesis advisor) / Hervig, Richard (Committee member) / Desch, Steven (Committee member) / Garvie, Laurence (Committee member) / Bell, James (Committee member) / Arizona State University (Publisher)
Created2016
Description
We model the self-compression of homogeneous, undifferentiated, Ceres-like bodies composed of various minerals and mineral-composites: antigorite, brucite, dolomite, lizardite and magnesite, plus mixtures which were the above minerals mixed with ice Ih. All of the modeled clay/ice bodies had a final radius within 1% of RCeres, an average final density

We model the self-compression of homogeneous, undifferentiated, Ceres-like bodies composed of various minerals and mineral-composites: antigorite, brucite, dolomite, lizardite and magnesite, plus mixtures which were the above minerals mixed with ice Ih. All of the modeled clay/ice bodies had a final radius within 1% of RCeres, an average final density of ~2083 kg m-3 and central pressures of ~133 MPa. The smallest radius was from magnesite, which had a final compressed radius of ~0.88 RCeres, central pressure of ~212 MPa and final density of ~2955 kg m-3. The most significant change in radius was due to the zero-pressure density as the highest densities created the highest force of gravity and produced the smallest radii, yet zero-pressure densities that matched Ceres produced 0.99 RCeres bodies. It was found that the addition of ice, anywhere from 9.1-19.1%, did not affect the body a measurable amount as the inclusion of ice resulted in a lower density creating a lower force of gravity, decreased central pressure and less overall compression. Models that closely resembled Ceres had internal pressures of 133 MPa, which is not enough pressure to induce pore collapse or produce drastic changes due to K and K'. Porosity and the addition of ice in Ceres-like bodies is possible and cannot be ignored when using more complicated modeling techniques. Each mineral and mineral-composite produced unique overall results which allowed us to compare each mineral to Ceres, understand how it has compressed over time and how objects of such a size are affected by compression. Due to the small size, low force of gravity and high bulk moduli of the given minerals, Ceres-like bodies do not compress a considerable amount if they are in fact composed of hydrated silicates.
ContributorsMastrean, Alex Travis (Author) / Desch, Steven (Thesis director) / Zolotov, Mikhail (Committee member) / Shim, Sang-Heon Dan (Committee member) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
148230-Thumbnail Image.png
Description

Stellar mass loss has a high impact on the overall evolution of a star. The amount<br/>of mass lost during a star’s lifetime dictates which remnant will be left behind and how<br/>the circumstellar environment will be affected. Several rates of mass loss have been<br/>proposed for use in stellar evolution codes, yielding

Stellar mass loss has a high impact on the overall evolution of a star. The amount<br/>of mass lost during a star’s lifetime dictates which remnant will be left behind and how<br/>the circumstellar environment will be affected. Several rates of mass loss have been<br/>proposed for use in stellar evolution codes, yielding discrepant results from codes using<br/>different rates. In this paper, I compare the effect of varying the mass loss rate in the<br/>stellar evolution code TYCHO on the initial-final mass relation. I computed four sets of<br/>models with varying mass loss rates and metallicities. Due to a large number of models<br/>reaching the luminous blue variable stage, only the two lower metallicity groups were<br/>considered. Their mass loss was analyzed using Python. Luminosity, temperature, and<br/>radius were also compared. The initial-final mass relation plots showed that in the 1/10<br/>solar metallicity case, reducing the mass loss rate tended to increase the dependence of final mass on initial mass. The limited nature of these results implies a need for further study into the effects of using different mass loss rates in the code TYCHO.

ContributorsAuchterlonie, Lauren (Author) / Young, Patrick (Thesis director) / Shkolnik, Evgenya (Committee member) / Starrfield, Sumner (Committee member) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
141502-Thumbnail Image.png
Description

Chemical composition affects virtually all aspects of astrobiology, from stellar astrophysics to molecular biology. We present a synopsis of the research results presented at the “Stellar Stoichiometry” Workshop Without Walls hosted at Arizona State University April 11–12, 2013, under the auspices of the NASA Astrobiology Institute. The results focus on

Chemical composition affects virtually all aspects of astrobiology, from stellar astrophysics to molecular biology. We present a synopsis of the research results presented at the “Stellar Stoichiometry” Workshop Without Walls hosted at Arizona State University April 11–12, 2013, under the auspices of the NASA Astrobiology Institute. The results focus on the measurement of chemical abundances and the effects of composition on processes from stellar to planetary scales. Of particular interest were the scientific connections between processes in these normally disparate fields. Measuring the abundances of elements in stars and giant and terrestrial planets poses substantial difficulties in technique and interpretation. One of the motivations for this conference was the fact that determinations of the abundance of a given element in a single star by different groups can differ by more than their quoted errors.

The problems affecting the reliability of abundance estimations and their inherent limitations are discussed. When these problems are taken into consideration, self-consistent surveys of stellar abundances show that there is still substantial variation (factors of ∼2) in the ratios of common elements (e.g., C, O, Na, Al, Mg, Si, Ca) important in rock-forming minerals, atmospheres, and biology. We consider how abundance variations arise through injection of supernova nucleosynthesis products into star-forming material and through photoevaporation of protoplanetary disks. The effects of composition on stellar evolution are substantial, and coupled with planetary atmosphere models can result in predicted habitable zone extents that vary by many tens of percent. Variations in the bulk composition of planets can affect rates of radiogenic heating and substantially change the mineralogy of planetary interiors, affecting properties such as convection and energy transport.

ContributorsYoung, Patrick (Author) / Desch, Steven (Author) / Anbar, Ariel (Author) / Barnes, Rory (Author) / Hinkel, Natalie R. (Author) / Kopparapu, Ravikumar (Author) / Madhusudhan, Nikku (Author) / Monga, Nikhil (Author) / Pagano, Michael (Author) / Riner, Miriam A. (Author) / Scannapieco, Evan (Author) / Shim, Sang-Heon (Author) / Truitt, Amanda (Author) / College of Liberal Arts and Sciences (Contributor)
Created2014-07-01