Matching Items (48)
Filtering by
- Genre: Masters Thesis
- Creators: Papandreou-Suppappola, Antonia
Description
Camera calibration has applications in the fields of robotic motion, geographic mapping, semiconductor defect characterization, and many more. This thesis considers camera calibration for the purpose of high accuracy three-dimensional reconstruction when characterizing ball grid arrays within the semiconductor industry. Bouguet's calibration method is used following a set of criteria with the purpose of studying the method's performance according to newly proposed standards. The performance of the camera calibration method is currently measured using standards such as pixel error and computational time. This thesis proposes the use of standard deviation of the intrinsic parameter estimation within a Monte Carlo simulation as a new standard of performance measure. It specifically shows that the standard deviation decreases based on the increased number of images input into the calibration routine. It is also shown that the default thresholds of the non-linear maximum likelihood estimation problem of the calibration method require change in order to improve computational time performance; however, the accuracy lost is negligable even for high accuracy requirements such as ball grid array characterization.
ContributorsStenger, Nickolas Arthur (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Kovvali, Narayan (Committee member) / Tepedelenlioğlu, Cihan (Committee member) / Arizona State University (Publisher)
Created2012
Description
There is a growing interest for improved high-accuracy camera calibration methods due to the increasing demand for 3D visual media in commercial markets. Camera calibration is used widely in the fields of computer vision, robotics and 3D reconstruction. Camera calibration is the first step for extracting 3D data from a 2D image. It plays a crucial role in computer vision and 3D reconstruction due to the fact that the accuracy of the reconstruction and 3D coordinate determination relies on the accuracy of the camera calibration to a great extent. This thesis presents a novel camera calibration method using a circular calibration pattern. The disadvantages and issues with existing state-of-the-art methods are discussed and are overcome in this work. The implemented system consists of techniques of local adaptive segmentation, ellipse fitting, projection and optimization. Simulation results are presented to illustrate the performance of the proposed scheme. These results show that the proposed method reduces the error as compared to the state-of-the-art for high-resolution images, and that the proposed scheme is more robust to blur in the imaged calibration pattern.
ContributorsPrakash, Charan Dudda (Author) / Karam, Lina J (Thesis advisor) / Frakes, David (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2012
Description
Topological methods for data analysis present opportunities for enforcing certain invariances of broad interest in computer vision: including view-point in activity analysis, articulation in shape analysis, and measurement invariance in non-linear dynamical modeling. The increasing success of these methods is attributed to the complementary information that topology provides, as well as availability of tools for computing topological summaries such as persistence diagrams. However, persistence diagrams are multi-sets of points and hence it is not straightforward to fuse them with features used for contemporary machine learning tools like deep-nets. In this paper theoretically well-grounded approaches to develop novel perturbation robust topological representations are presented, with the long-term view of making them amenable to fusion with contemporary learning architectures. The proposed representation lives on a Grassmann manifold and hence can be efficiently used in machine learning pipelines.
The proposed representation.The efficacy of the proposed descriptor was explored on three applications: view-invariant activity analysis, 3D shape analysis, and non-linear dynamical modeling. Favorable results in both high-level recognition performance and improved performance in reduction of time-complexity when compared to other baseline methods are obtained.
The proposed representation.The efficacy of the proposed descriptor was explored on three applications: view-invariant activity analysis, 3D shape analysis, and non-linear dynamical modeling. Favorable results in both high-level recognition performance and improved performance in reduction of time-complexity when compared to other baseline methods are obtained.
ContributorsThopalli, Kowshik (Author) / Turaga, Pavan Kumar (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Yang, Yezhou (Committee member) / Arizona State University (Publisher)
Created2017
Description
The Internet of Things (IoT) has become a more pervasive part of everyday life. IoT networks such as wireless sensor networks, depend greatly on the limiting unnecessary power consumption. As such, providing low-power, adaptable software can greatly improve network design. For streaming live video content, Wireless Video Sensor Network Platform compatible Dynamic Adaptive Streaming over HTTP (WVSNP-DASH) aims to revolutionize wireless segmented video streaming by providing a low-power, adaptable framework to compete with modern DASH players such as Moving Picture Experts Group (MPEG-DASH) and Apple’s Hypertext Transfer Protocol (HTTP) Live Streaming (HLS). Each segment is independently playable, and does not depend on a manifest file, resulting in greatly improved power performance. My work was to show that WVSNP-DASH is capable of further power savings at the level of the wireless sensor node itself if a native capture program is implemented at the camera sensor node. I created a native capture program in the C language that fulfills the name-based segmentation requirements of WVSNP-DASH. I present this program with intent to measure its power consumption on a hardware test-bed in future. To my knowledge, this is the first program to generate WVSNP-DASH playable video segments. The results show that our program could be utilized by WVSNP-DASH, but there are issues with the efficiency, so provided are an additional outline for further improvements.
ContributorsKhan, Zarah (Author) / Reisslein, Martin (Thesis advisor) / Seema, Adolph (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2018
Description
As the demand for wireless systems increases exponentially, it has become necessary
for different wireless modalities, like radar and communication systems, to share the
available bandwidth. One approach to realize coexistence successfully is for each
system to adopt a transmit waveform with a unique nonlinear time-varying phase
function. At the receiver of the system of interest, the waveform received for process-
ing may still suffer from low signal-to-interference-plus-noise ratio (SINR) due to the
presence of the waveforms that are matched to the other coexisting systems. This
thesis uses a time-frequency based approach to increase the SINR of a system by estimating the unique nonlinear instantaneous frequency (IF) of the waveform matched
to the system. Specifically, the IF is estimated using the synchrosqueezing transform,
a highly localized time-frequency representation that also enables reconstruction of
individual waveform components. As the IF estimate is biased, modified versions of
the transform are investigated to obtain estimators that are both unbiased and also
matched to the unique nonlinear phase function of a given waveform. Simulations
using transmit waveforms of coexisting wireless systems are provided to demonstrate
the performance of the proposed approach using both biased and unbiased IF estimators.
for different wireless modalities, like radar and communication systems, to share the
available bandwidth. One approach to realize coexistence successfully is for each
system to adopt a transmit waveform with a unique nonlinear time-varying phase
function. At the receiver of the system of interest, the waveform received for process-
ing may still suffer from low signal-to-interference-plus-noise ratio (SINR) due to the
presence of the waveforms that are matched to the other coexisting systems. This
thesis uses a time-frequency based approach to increase the SINR of a system by estimating the unique nonlinear instantaneous frequency (IF) of the waveform matched
to the system. Specifically, the IF is estimated using the synchrosqueezing transform,
a highly localized time-frequency representation that also enables reconstruction of
individual waveform components. As the IF estimate is biased, modified versions of
the transform are investigated to obtain estimators that are both unbiased and also
matched to the unique nonlinear phase function of a given waveform. Simulations
using transmit waveforms of coexisting wireless systems are provided to demonstrate
the performance of the proposed approach using both biased and unbiased IF estimators.
ContributorsGattani, Vineet Sunil (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Richmond, Christ (Committee member) / Maurer, Alexander (Committee member) / Arizona State University (Publisher)
Created2018
Description
Speech is generated by articulators acting on
a phonatory source. Identification of this
phonatory source and articulatory geometry are
individually challenging and ill-posed
problems, called speech separation and
articulatory inversion, respectively.
There exists a trade-off
between decomposition and recovered
articulatory geometry due to multiple
possible mappings between an
articulatory configuration
and the speech produced. However, if measurements
are obtained only from a microphone sensor,
they lack any invasive insight and add
additional challenge to an already difficult
problem.
A joint non-invasive estimation
strategy that couples articulatory and
phonatory knowledge would lead to better
articulatory speech synthesis. In this thesis,
a joint estimation strategy for speech
separation and articulatory geometry recovery
is studied. Unlike previous
periodic/aperiodic decomposition methods that
use stationary speech models within a
frame, the proposed model presents a
non-stationary speech decomposition method.
A parametric glottal source model and an
articulatory vocal tract response are
represented in a dynamic state space formulation.
The unknown parameters of the
speech generation components are estimated
using sequential Monte Carlo methods
under some specific assumptions.
The proposed approach is compared with other
glottal inverse filtering methods,
including iterative adaptive inverse filtering,
state-space inverse filtering, and
the quasi-closed phase method.
a phonatory source. Identification of this
phonatory source and articulatory geometry are
individually challenging and ill-posed
problems, called speech separation and
articulatory inversion, respectively.
There exists a trade-off
between decomposition and recovered
articulatory geometry due to multiple
possible mappings between an
articulatory configuration
and the speech produced. However, if measurements
are obtained only from a microphone sensor,
they lack any invasive insight and add
additional challenge to an already difficult
problem.
A joint non-invasive estimation
strategy that couples articulatory and
phonatory knowledge would lead to better
articulatory speech synthesis. In this thesis,
a joint estimation strategy for speech
separation and articulatory geometry recovery
is studied. Unlike previous
periodic/aperiodic decomposition methods that
use stationary speech models within a
frame, the proposed model presents a
non-stationary speech decomposition method.
A parametric glottal source model and an
articulatory vocal tract response are
represented in a dynamic state space formulation.
The unknown parameters of the
speech generation components are estimated
using sequential Monte Carlo methods
under some specific assumptions.
The proposed approach is compared with other
glottal inverse filtering methods,
including iterative adaptive inverse filtering,
state-space inverse filtering, and
the quasi-closed phase method.
ContributorsVenkataramani, Adarsh Akkshai (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Bliss, Daniel W (Committee member) / Turaga, Pavan (Committee member) / Arizona State University (Publisher)
Created2018
Description
Tracking targets in the presence of clutter is inevitable, and presents many challenges. Additionally, rapid, drastic changes in clutter density between different environments or scenarios can make it even more difficult for tracking algorithms to adapt. A novel approach to target tracking in such dynamic clutter environments is proposed using a particle filter (PF) integrated with Interacting Multiple Models (IMMs) to compensate and adapt to the transition between different clutter densities. This model was implemented for the case of a monostatic sensor tracking a single target moving with constant velocity along a two-dimensional trajectory, which crossed between regions of drastically different clutter densities. Multiple combinations of clutter density transitions were considered, using up to three different clutter densities. It was shown that the integrated IMM PF algorithm outperforms traditional approaches such as the PF in terms of tracking results and performance. The minimal additional computational expense of including the IMM more than warrants the benefits of having it supplement and amplify the advantages of the PF.
ContributorsDutson, Karl (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Kovvali, Narayan (Committee member) / Bliss, Daniel W (Committee member) / Arizona State University (Publisher)
Created2015
Description
As the demand for spectrum sharing between radar and communications systems is steadily increasing, the coexistence between the two systems is a growing and very challenging problem. Radar tracking in the presence of strong communications interference can result in low probability of detection even when sequential Monte Carlo
tracking methods such as the particle filter (PF) are used that better match the target kinematic model. In particular, the tracking performance can fluctuate as the power level of the communications interference can vary dynamically and unpredictably.
This work proposes to integrate the interacting multiple model (IMM) selection approach with the PF tracker to allow for dynamic variations in the power spectral density of the communications interference. The model switching allows for a necessary transition between different communications interference power spectral density (CI-PSD) values in order to reduce prediction errors. Simulations demonstrate the high performance of the integrated approach with as many as six dynamic CI-PSD value changes during the target track. For low signal-to-interference-plus-noise ratios, the derivation for estimating the high power levels of the communications interference is provided; the estimated power levels would be dynamically used in the IMM when integrated with a track-before-detect filter that is better matched to low SINR tracking applications.
tracking methods such as the particle filter (PF) are used that better match the target kinematic model. In particular, the tracking performance can fluctuate as the power level of the communications interference can vary dynamically and unpredictably.
This work proposes to integrate the interacting multiple model (IMM) selection approach with the PF tracker to allow for dynamic variations in the power spectral density of the communications interference. The model switching allows for a necessary transition between different communications interference power spectral density (CI-PSD) values in order to reduce prediction errors. Simulations demonstrate the high performance of the integrated approach with as many as six dynamic CI-PSD value changes during the target track. For low signal-to-interference-plus-noise ratios, the derivation for estimating the high power levels of the communications interference is provided; the estimated power levels would be dynamically used in the IMM when integrated with a track-before-detect filter that is better matched to low SINR tracking applications.
ContributorsZhou, Jian (Author) / Papandreou-Suppappola, Antonia (Thesis advisor) / Kovvali, Narayan (Committee member) / Berisha, Visar (Committee member) / Arizona State University (Publisher)
Created2015
Description
The increased risk of falling and the worse ability to perform other daily physical activities in the elderly cause concern about monitoring and correcting basic everyday movement. In this thesis, a Kinect-based system was designed to assess one of the most important factors in balance control of human body when doing Sit-to-Stand (STS) movement: the postural symmetry in mediolateral direction. A symmetry score, calculated by the data obtained from a Kinect RGB-D camera, was proposed to reflect the mediolateral postural symmetry degree and was used to drive a real-time audio feedback designed in MAX/MSP to help users adjust themselves to perform their movement in a more symmetrical way during STS. The symmetry score was verified by calculating the Spearman correlation coefficient with the data obtained from Inertial Measurement Unit (IMU) sensor and got an average value at 0.732. Five healthy adults, four males and one female, with normal balance abilities and with no musculoskeletal disorders, were selected to participate in the experiment and the results showed that the low-cost Kinect-based system has the potential to train users to perform a more symmetrical movement in mediolateral direction during STS movement.
ContributorsZhou, Henghao (Author) / Turaga, Pavan (Thesis advisor) / Ingalls, Todd (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2016
Description
This thesis addresses two problems in digital baseband design of wireless communication systems, namely, those in Internet of Things (IoT) terminals that support long range communications and those in full-duplex systems that are designed for high spectral efficiency.
IoT terminals for long range communications are typically based on Orthogonal Frequency-Division Multiple Access (OFDMA) and spread spectrum technologies. In order to design an efficient baseband architecture for such terminals, the workload profiles of both systems are analyzed. Since frame detection unit has by far the highest computational load, a simple architecture that uses only a scalar datapath is proposed. To optimize for low energy consumption, application-specific instructions that minimize register accesses and address generation units for streamlined memory access are introduced. Two parameters, namely, correlation window size and threshold value, affect the detection probability, the false alarm probability and hence energy consumption. Next, energy-optimal operation settings for correlation window size and threshold value are derived for different channel conditions. For both good and bad channel conditions, if target signal detection probability is greater than 0.9, the baseband processor has the lowest energy when the frame detection algorithm uses the longest correlation window and the highest threshold value.
A full-duplex system has high spectral efficiency but suffers from self-interference. Part of the interference can be cancelled digitally using equalization techniques. The cancellation performance and computation complexity of the competing equalization algorithms, namely, Least Mean Square (LMS), Normalized LMS (NLMS), Recursive Least Square (RLS) and feedback equalizers based on LMS, NLMS and RLS are analyzed, and a trade-off between performance and complexity established. NLMS linear equalizer is found to be suitable for resource-constrained mobile devices and NLMS decision feedback equalizer is more appropriate for base stations that are not energy constrained.
IoT terminals for long range communications are typically based on Orthogonal Frequency-Division Multiple Access (OFDMA) and spread spectrum technologies. In order to design an efficient baseband architecture for such terminals, the workload profiles of both systems are analyzed. Since frame detection unit has by far the highest computational load, a simple architecture that uses only a scalar datapath is proposed. To optimize for low energy consumption, application-specific instructions that minimize register accesses and address generation units for streamlined memory access are introduced. Two parameters, namely, correlation window size and threshold value, affect the detection probability, the false alarm probability and hence energy consumption. Next, energy-optimal operation settings for correlation window size and threshold value are derived for different channel conditions. For both good and bad channel conditions, if target signal detection probability is greater than 0.9, the baseband processor has the lowest energy when the frame detection algorithm uses the longest correlation window and the highest threshold value.
A full-duplex system has high spectral efficiency but suffers from self-interference. Part of the interference can be cancelled digitally using equalization techniques. The cancellation performance and computation complexity of the competing equalization algorithms, namely, Least Mean Square (LMS), Normalized LMS (NLMS), Recursive Least Square (RLS) and feedback equalizers based on LMS, NLMS and RLS are analyzed, and a trade-off between performance and complexity established. NLMS linear equalizer is found to be suitable for resource-constrained mobile devices and NLMS decision feedback equalizer is more appropriate for base stations that are not energy constrained.
ContributorsWu, Shunyao (Author) / Chakrabarti, Chaitali (Thesis advisor) / Papandreou-Suppappola, Antonia (Committee member) / Lee, Hyunseok (Committee member) / Arizona State University (Publisher)
Created2017