Matching Items (5)
Filtering by
- Genre: Masters Thesis
Description
Current policies subsidizing or accelerating deployment of photovoltaics (PV) are typically motivated by claims of environmental benefit, such as the reduction of CO2 emissions generated by the fossil-fuel fired power plants that PV is intended to displace. Existing practice is to assess these environmental benefits on a net life-cycle basis, where CO2 benefits occurring during use of the PV panels is found to exceed emissions generated during the PV manufacturing phase including materials extraction and manufacture of the PV panels prior to installation. However, this approach neglects to recognize that the environmental costs of CO2 release during manufacture are incurred early, while environmental benefits accrue later. Thus, where specific policy targets suggest meeting CO2 reduction targets established by a certain date, rapid PV deployment may have counter-intuitive, albeit temporary, undesired consequences. Thus, on a cumulative radiative forcing (CRF) basis, the environmental improvements attributable to PV might be realized much later than is currently understood. This phenomenon is particularly acute when PV manufacture occurs in areas using CO2 intensive energy sources (e.g., coal), but deployment occurs in areas with less CO2 intensive electricity sources (e.g., hydro). This thesis builds a dynamic Cumulative Radiative Forcing (CRF) model to examine the inter-temporal warming impacts of PV deployments in three locations: California, Wyoming and Arizona. The model includes the following factors that impact CRF: PV deployment rate, choice of PV technology, pace of PV technology improvements, and CO2 intensity in the electricity mix at manufacturing and deployment locations. Wyoming and California show the highest and lowest CRF benefits as they have the most and least CO2 intensive grids, respectively. CRF payback times are longer than CO2 payback times in all cases. Thin film, CdTe PV technologies have the lowest manufacturing CO2 emissions and therefore the shortest CRF payback times. This model can inform policies intended to fulfill time-sensitive CO2 mitigation goals while minimizing short term radiative forcing.
ContributorsTriplican Ravikumar, Dwarakanath (Author) / Seager, Thomas P (Thesis advisor) / Fraser, Matthew P (Thesis advisor) / Chester, Mikhail V (Committee member) / Sinha, Parikhit (Committee member) / Arizona State University (Publisher)
Created2013
Description
Contrary to many previous travel demand forecasts there is increasing evidence that vehicle travel in developed countries may be peaking. The underlying causes of this peaking are still under much debate and there has been a mobilization of research, largely focused at the national scale, to study the explanatory drivers but research focused at the metropolitan scale, where transportation policy and planning are frequently decided, is relatively thin. Additionally, a majority of this research has focused on changes within the activity system without considering the impact transportation infrastructure has on overall travel demand. Using Los Angeles County California, we investigate Peak Car and whether the saturation of automobile infrastructure, in addition to societal and economic factors, may be a suppressing factor. After peaking in 2002, vehicle travel in Los Angeles County in 2010 was estimated at 78 billion and was 20.3 billion shy of projections made in 2002. The extent to which infrastructure saturation may contribute to Peak Car is evaluated by analyzing social and economic factors that may have impacted personal automobile usage over the last decade. This includes changing fuel prices, fuel economy, population growth, increased utilization of alternate transportation modes, changes in driver demographics , travel time and income levels. Summation of all assessed factors reveals there is at least some portion of the 20 billion VMT that is unexplained in all but the worst case scenario. We hypothesize that the unexplained remaining VMT may be explained by infrastructure supply constraints that result in suppression of travel. This finding has impacts on how we see the role of hard infrastructure systems in urban growth and we explore these impacts in the research.
ContributorsFraser, Andrew (Author) / Chester, Mikhail V (Thesis advisor) / Pendyala, Ram M. (Committee member) / Seager, Thomas P (Committee member) / Arizona State University (Publisher)
Created2014
Description
The environmental and economic assessment of neighborhood-scale transit-oriented urban form changes should include initial construction impacts through long-term use to fully understand the benefits and costs of smart growth policies. The long-term impacts of moving people closer to transit require the coupling of behavioral forecasting with environmental assessment. Using new light rail and bus rapid transit in Los Angeles, California as a case study, a life-cycle environmental and economic assessment is developed to assess the potential range of impacts resulting from mixed-use infill development. An integrated transportation and land use life-cycle assessment framework is developed to estimate energy consumption, air emissions, and economic (public, developer, and user) costs. Residential and commercial buildings, automobile travel, and transit operation changes are included and a 60-year forecast is developed that compares transit-oriented growth against growth in areas without close access to high-capacity transit service. The results show that commercial developments create the greatest potential for impact reductions followed by residential commute shifts to transit, both of which may be effected by access to high-capacity transit, reduced parking requirements, and developer incentives. Greenhouse gas emission reductions up to 470 Gg CO2-equivalents per year can be achieved with potential costs savings for TOD users. The potential for respiratory impacts (PM10-equivalents) and smog formation can be reduced by 28-35%. The shift from business-as-usual growth to transit-oriented development can decrease user costs by $3,100 per household per year over the building lifetime, despite higher rental costs within the mixed-use development.
ContributorsNahlik, Matthew (Author) / Chester, Mikhail V (Thesis advisor) / Pendyala, Ram (Committee member) / Fraser, Matthew (Committee member) / Arizona State University (Publisher)
Created2014
Description
With high potential for automobiles to cause air pollution and greenhouse gas emissions, there is concern that automobiles accessing or egressing public transportation may cause emissions similar to regular automobile use. Due to limited literature and research that evaluates and discusses environmental impacts from first and last mile portions of transit trips, there is a lack of understanding on this topic. This research aims to comprehensively evaluate the life cycle impacts of first and last mile trips on multimodal transit. A case study of transit and automobile travel in the greater Los Angeles region is evaluated by using a comprehensive life cycle assessment combined with regional household travel survey data to evaluate first-last mile trip impacts in multimodal transit focusing on automobile trips accessing or egressing transit. First and last mile automobile trips were found to increase total multimodal transit trip emissions by 2 to 12 times (most extreme cases were carbon monoxide and volatile organic compounds). High amounts of coal-fired energy generation can cause electric propelled rail trips with automobile access or egress to have similar or more emissions (commonly greenhouse gases, sulfur dioxide, and mono-nitrogen oxides) than competing automobile trips, however, most criteria air pollutants occur remotely. Methods to reduce first-last mile impacts depend on the characteristics of the transit systems and may include promoting first-last mile carpooling, adjusting station parking pricing and availability, and increased emphasis on walking and biking paths in areas with low access-egress trip distances.
ContributorsHoehne, Christopher G (Author) / Chester, Mikhail V (Thesis advisor) / Salon, Deborah (Committee member) / Zhou, Xuesong (Committee member) / Arizona State University (Publisher)
Created2016
Description
Fluids such as steam, oils, and molten salts are commonly used to store and transfer heat in a concentrating solar power (CSP) system. Metal oxide materials have received increasing attention for their reversible reduction-oxidation (redox) reaction that permits receiving, storing, and releasing energy through sensible and chemical potential. This study investigates the performance of a 111.7 MWe CSP system coupled with a thermochemical energy storage system (TCES) that uses a redox active metal oxide acting as the heat transfer fluid. A one-dimensional thermodynamic model is introduced for the novel CSP system design, with detailed designs of the underlying nine components developed from first principles and empirical data of the heat transfer media. The model is used to (a) size components, (b) examine intraday operational behaviors of the system against varying solar insolation, (c) calculate annual productivity and performance characteristics over a simulated year, and (d) evaluate factors that affect system performance using sensitivity analysis. Time series simulations use hourly direct normal irradiance (DNI) data for Barstow, California, USA. The nominal system design uses a solar multiple of 1.8 with a storage capacity of six hours for off-sun power generation. The mass of particles to achieve six hours of storage weighs 5,140 metric tonnes. Capacity factor increases by 3.55% for an increase in storage capacity to eight hours which requires an increase in storage volume by 33% or 737 m3, or plant design can be improved by decreasing solar multiple to 1.6 to increase the ratio of annual capacity factor to solar multiple. The solar reduction receiver is the focal point for the concentrated solar energy for inducing an endothermic reaction in the particles under low partial pressure of oxygen, and the reoxidation reactor induces the opposite exothermic reaction by mixing the particles with air to power an air Brayton engine. Stream flow data indicate the solar receiver experiences the largest thermal loss of any component, excluding the solar field. Design and sensitivity analysis of thermal insulation layers for the solar receiver show that additional RSLE-57 insulation material achieves the greatest increase in energetic efficiency of the five materials investigated.
ContributorsGorman, Brandon Tom (Author) / Johnson, Nathan G (Thesis advisor) / Stechel, Ellen B (Committee member) / Chester, Mikhail V (Committee member) / Arizona State University (Publisher)
Created2017