Matching Items (20)
Filtering by
- Genre: Doctoral Dissertation
Description
Sensitivity is a fundamental challenge for in vivo molecular magnetic resonance imaging (MRI). Here, I improve the sensitivity of metal nanoparticle contrast agents by strategically incorporating pure and doped metal oxides in the nanoparticle core, forming a soluble, monodisperse, contrast agent with adjustable T2 or T1 relaxivity (r2 or r1). I first developed a simplified technique to incorporate iron oxides in apoferritin to form "magnetoferritin" for nM-level detection with T2- and T2* weighting. I then explored whether the crystal could be chemically modified to form a particle with high r1. I first adsorbed Mn2+ ions to metal binding sites in the apoferritin pores. The strategic placement of metal ions near sites of water exchange and within the crystal oxide enhance r1, suggesting a mechanism for increasing relaxivity in porous nanoparticle agents. However, the Mn2+ addition was only possible when the particle was simultaneously filled with an iron oxide, resulting in a particle with a high r1 but also a high r2 and making them undetectable with conventional T1-weighting techniques. To solve this problem and decrease the particle r2 for more sensitive detection, I chemically doped the nanoparticles with tungsten to form a disordered W-Fe oxide composite in the apoferritin core. This configuration formed a particle with a r1 of 4,870mM-1s-1 and r2 of 9,076mM-1s-1. These relaxivities allowed the detection of concentrations ranging from 20nM - 400nM in vivo, both passively injected and targeted to the kidney glomerulus. I further developed an MRI acquisition technique to distinguish particles based on r2/r1, and show that three nanoparticles of similar size can be distinguished in vitro and in vivo with MRI. This work forms the basis for a new, highly flexible inorganic approach to design nanoparticle contrast agents for molecular MRI.
ContributorsClavijo Jordan, Maria Veronica (Author) / Bennett, Kevin M (Thesis advisor) / Kodibagkar, Vikram (Committee member) / Sherry, A Dean (Committee member) / Wang, Xiao (Committee member) / Yarger, Jeffery (Committee member) / Arizona State University (Publisher)
Created2012
Description
This dissertation treats a number of related problems in control and data analysis of complex networks.
First, in existing linear controllability frameworks, the ability to steer a network from any initiate state toward any desired state is measured by the minimum number of driver nodes. However, the associated optimal control energy can become unbearably large, preventing actual control from being realized. Here I develop a physical controllability framework and propose strategies to turn physically uncontrollable networks into physically controllable ones. I also discover that although full control can be guaranteed by the prevailing structural controllability theory, it is necessary to balance the number of driver nodes and control energy to achieve actual control, and my work provides a framework to address this issue.
Second, in spite of recent progresses in linear controllability, controlling nonlinear dynamical networks remains an outstanding problem. Here I develop an experimentally feasible control framework for nonlinear dynamical networks that exhibit multistability. The control objective is to apply parameter perturbation to drive the system from one attractor to another. I introduce the concept of attractor network and formulate a quantifiable framework: a network is more controllable if the attractor network is more strongly connected. I test the control framework using examples from various models and demonstrate the beneficial role of noise in facilitating control.
Third, I analyze large data sets from a diverse online social networking (OSN) systems and find that the growth dynamics of meme popularity exhibit characteristically different behaviors: linear, “S”-shape and exponential growths. Inspired by cell population growth model in microbial ecology, I construct a base growth model for meme popularity in OSNs. Then I incorporate human interest dynamics into the base model and propose a hybrid model which contains a small number of free parameters. The model successfully predicts the various distinct meme growth dynamics.
At last, I propose a nonlinear dynamics model to characterize the controlling of WNT signaling pathway in the differentiation of neural progenitor cells. The model is able to predict experiment results and shed light on the understanding of WNT regulation mechanisms.
First, in existing linear controllability frameworks, the ability to steer a network from any initiate state toward any desired state is measured by the minimum number of driver nodes. However, the associated optimal control energy can become unbearably large, preventing actual control from being realized. Here I develop a physical controllability framework and propose strategies to turn physically uncontrollable networks into physically controllable ones. I also discover that although full control can be guaranteed by the prevailing structural controllability theory, it is necessary to balance the number of driver nodes and control energy to achieve actual control, and my work provides a framework to address this issue.
Second, in spite of recent progresses in linear controllability, controlling nonlinear dynamical networks remains an outstanding problem. Here I develop an experimentally feasible control framework for nonlinear dynamical networks that exhibit multistability. The control objective is to apply parameter perturbation to drive the system from one attractor to another. I introduce the concept of attractor network and formulate a quantifiable framework: a network is more controllable if the attractor network is more strongly connected. I test the control framework using examples from various models and demonstrate the beneficial role of noise in facilitating control.
Third, I analyze large data sets from a diverse online social networking (OSN) systems and find that the growth dynamics of meme popularity exhibit characteristically different behaviors: linear, “S”-shape and exponential growths. Inspired by cell population growth model in microbial ecology, I construct a base growth model for meme popularity in OSNs. Then I incorporate human interest dynamics into the base model and propose a hybrid model which contains a small number of free parameters. The model successfully predicts the various distinct meme growth dynamics.
At last, I propose a nonlinear dynamics model to characterize the controlling of WNT signaling pathway in the differentiation of neural progenitor cells. The model is able to predict experiment results and shed light on the understanding of WNT regulation mechanisms.
ContributorsWang, Lezhi (Author) / Lai, Ying-Cheng (Thesis advisor) / Wang, Xiao (Thesis advisor) / Papandreoou-Suppappola, Antonia (Committee member) / Brafman, David (Committee member) / Arizona State University (Publisher)
Created2017
Description
While techniques for reading DNA in some capacity has been possible for decades,
the ability to accurately edit genomes at scale has remained elusive. Novel techniques
have been introduced recently to aid in the writing of DNA sequences. While writing
DNA is more accessible, it still remains expensive, justifying the increased interest in
in silico predictions of cell behavior. In order to accurately predict the behavior of
cells it is necessary to extensively model the cell environment, including gene-to-gene
interactions as completely as possible.
Significant algorithmic advances have been made for identifying these interactions,
but despite these improvements current techniques fail to infer some edges, and
fail to capture some complexities in the network. Much of this limitation is due to
heavily underdetermined problems, whereby tens of thousands of variables are to be
inferred using datasets with the power to resolve only a small fraction of the variables.
Additionally, failure to correctly resolve gene isoforms using short reads contributes
significantly to noise in gene quantification measures.
This dissertation introduces novel mathematical models, machine learning techniques,
and biological techniques to solve the problems described above. Mathematical
models are proposed for simulation of gene network motifs, and raw read simulation.
Machine learning techniques are shown for DNA sequence matching, and DNA
sequence correction.
Results provide novel insights into the low level functionality of gene networks. Also
shown is the ability to use normalization techniques to aggregate data for gene network
inference leading to larger data sets while minimizing increases in inter-experimental
noise. Results also demonstrate that high error rates experienced by third generation
sequencing are significantly different than previous error profiles, and that these errors can be modeled, simulated, and rectified. Finally, techniques are provided for amending this DNA error that preserve the benefits of third generation sequencing.
the ability to accurately edit genomes at scale has remained elusive. Novel techniques
have been introduced recently to aid in the writing of DNA sequences. While writing
DNA is more accessible, it still remains expensive, justifying the increased interest in
in silico predictions of cell behavior. In order to accurately predict the behavior of
cells it is necessary to extensively model the cell environment, including gene-to-gene
interactions as completely as possible.
Significant algorithmic advances have been made for identifying these interactions,
but despite these improvements current techniques fail to infer some edges, and
fail to capture some complexities in the network. Much of this limitation is due to
heavily underdetermined problems, whereby tens of thousands of variables are to be
inferred using datasets with the power to resolve only a small fraction of the variables.
Additionally, failure to correctly resolve gene isoforms using short reads contributes
significantly to noise in gene quantification measures.
This dissertation introduces novel mathematical models, machine learning techniques,
and biological techniques to solve the problems described above. Mathematical
models are proposed for simulation of gene network motifs, and raw read simulation.
Machine learning techniques are shown for DNA sequence matching, and DNA
sequence correction.
Results provide novel insights into the low level functionality of gene networks. Also
shown is the ability to use normalization techniques to aggregate data for gene network
inference leading to larger data sets while minimizing increases in inter-experimental
noise. Results also demonstrate that high error rates experienced by third generation
sequencing are significantly different than previous error profiles, and that these errors can be modeled, simulated, and rectified. Finally, techniques are provided for amending this DNA error that preserve the benefits of third generation sequencing.
ContributorsFaucon, Philippe Christophe (Author) / Liu, Huan (Thesis advisor) / Wang, Xiao (Committee member) / Crook, Sharon M (Committee member) / Wang, Yalin (Committee member) / Sarjoughian, Hessam S. (Committee member) / Arizona State University (Publisher)
Created2017
Description
Rewired biological pathways and/or rewired microRNA (miRNA)-mRNA interactions might also influence the activity of biological pathways. Here, rewired biological pathways is defined as differential (rewiring) effect of genes on the topology of biological pathways between controls and cases. Similarly, rewired miRNA-mRNA interactions are defined as the differential (rewiring) effects of miRNAs on the topology of biological pathways between controls and cases. In the dissertation, it is discussed that how rewired biological pathways (Chapter 1) and/or rewired miRNA-mRNA interactions (Chapter 2) aberrantly influence the activity of biological pathways and their association with disease.
This dissertation proposes two PageRank-based analytical methods, Pathways of Topological Rank Analysis (PoTRA) and miR2Pathway, discussed in Chapter 1 and Chapter 2, respectively. PoTRA focuses on detecting pathways with an altered number of hub genes in corresponding pathways between two phenotypes. The basis for PoTRA is that the loss of connectivity is a common topological trait of cancer networks, as well as the prior knowledge that a normal biological network is a scale-free network whose degree distribution follows a power law where a small number of nodes are hubs and a large number of nodes are non-hubs. However, from normal to cancer, the process of the network losing connectivity might be the process of disrupting the scale-free structure of the network, namely, the number of hub genes might be altered in cancer compared to that in normal samples. Hence, it is hypothesized that if the number of hub genes is different in a pathway between normal and cancer, this pathway might be involved in cancer. MiR2Pathway focuses on quantifying the differential effects of miRNAs on the activity of a biological pathway when miRNA-mRNA connections are altered from normal to disease and rank disease risk of rewired miRNA-mediated biological pathways. This dissertation explores how rewired gene-gene interactions and rewired miRNA-mRNA interactions lead to aberrant activity of biological pathways, and rank pathways for their disease risk. The two methods proposed here can be used to complement existing genomics analysis methods to facilitate the study of biological mechanisms behind disease at the systems-level.
This dissertation proposes two PageRank-based analytical methods, Pathways of Topological Rank Analysis (PoTRA) and miR2Pathway, discussed in Chapter 1 and Chapter 2, respectively. PoTRA focuses on detecting pathways with an altered number of hub genes in corresponding pathways between two phenotypes. The basis for PoTRA is that the loss of connectivity is a common topological trait of cancer networks, as well as the prior knowledge that a normal biological network is a scale-free network whose degree distribution follows a power law where a small number of nodes are hubs and a large number of nodes are non-hubs. However, from normal to cancer, the process of the network losing connectivity might be the process of disrupting the scale-free structure of the network, namely, the number of hub genes might be altered in cancer compared to that in normal samples. Hence, it is hypothesized that if the number of hub genes is different in a pathway between normal and cancer, this pathway might be involved in cancer. MiR2Pathway focuses on quantifying the differential effects of miRNAs on the activity of a biological pathway when miRNA-mRNA connections are altered from normal to disease and rank disease risk of rewired miRNA-mediated biological pathways. This dissertation explores how rewired gene-gene interactions and rewired miRNA-mRNA interactions lead to aberrant activity of biological pathways, and rank pathways for their disease risk. The two methods proposed here can be used to complement existing genomics analysis methods to facilitate the study of biological mechanisms behind disease at the systems-level.
ContributorsLi, Chaoxing (Author) / Dinu, Valentin (Thesis advisor) / Kuang, Yang (Thesis advisor) / Liu, Li (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2017
Description
Synthetic biology is an emerging field which melds genetics, molecular biology, network theory, and mathematical systems to understand, build, and predict gene network behavior. As an engineering discipline, developing a mathematical understanding of the genetic circuits being studied is of fundamental importance. In this dissertation, mathematical concepts for understanding, predicting, and controlling gene transcriptional networks are presented and applied to two synthetic gene network contexts. First, this engineering approach is used to improve the function of the guide ribonucleic acid (gRNA)-targeted, dCas9-regulated transcriptional cascades through analysis and targeted modification of the RNA transcript. In so doing, a fluorescent guide RNA (fgRNA) is developed to more clearly observe gRNA dynamics and aid design. It is shown that through careful optimization, RNA Polymerase II (Pol II) driven gRNA transcripts can be strong enough to exhibit measurable cascading behavior, previously only shown in RNA Polymerase III (Pol III) circuits. Second, inherent gene expression noise is used to achieve precise fractional differentiation of a population. Mathematical methods are employed to predict and understand the observed behavior, and metrics for analyzing and quantifying similar differentiation kinetics are presented. Through careful mathematical analysis and simulation, coupled with experimental data, two methods for achieving ratio control are presented, with the optimal schema for any application being dependent on the noisiness of the system under study. Together, these studies push the boundaries of gene network control, with potential applications in stem cell differentiation, therapeutics, and bio-production.
ContributorsMenn, David J (Author) / Wang, Xiao (Thesis advisor) / Kiani, Samira (Committee member) / Haynes, Karmella (Committee member) / Nielsen, David (Committee member) / Marshall, Pamela (Committee member) / Arizona State University (Publisher)
Created2018
Description
Synthetic gene networks have evolved from simple proof-of-concept circuits to
complex therapy-oriented networks over the past fifteen years. This advancement has
greatly facilitated expansion of the emerging field of synthetic biology. Multistability is a
mechanism that cells use to achieve a discrete number of mutually exclusive states in
response to environmental inputs. However, complex contextual connections of gene
regulatory networks in natural settings often impede the experimental establishment of
the function and dynamics of each specific gene network.
In this work, diverse synthetic gene networks are rationally designed and
constructed using well-characterized biological components to approach the cell fate
determination and state transition dynamics in multistable systems. Results show that
unimodality and bimodality and trimodality can be achieved through manipulation of the
signal and promoter crosstalk in quorum-sensing systems, which enables bacterial cells to
communicate with each other.
Moreover, a synthetic quadrastable circuit is also built and experimentally
demonstrated to have four stable steady states. Experiments, guided by mathematical
modeling predictions, reveal that sequential inductions generate distinct cell fates by
changing the landscape in sequence and hence navigating cells to different final states.
Circuit function depends on the specific protein expression levels in the circuit.
We then establish a protein expression predictor taking into account adjacent
transcriptional regions’ features through construction of ~120 synthetic gene circuits
(operons) in Escherichia coli. The predictor’s utility is further demonstrated in evaluating genes’ relative expression levels in construction of logic gates and tuning gene expressions and nonlinear dynamics of bistable gene networks.
These combined results illustrate applications of synthetic gene networks to
understand the cell fate determination and state transition dynamics in multistable
systems. A protein-expression predictor is also developed to evaluate and tune circuit
dynamics.
complex therapy-oriented networks over the past fifteen years. This advancement has
greatly facilitated expansion of the emerging field of synthetic biology. Multistability is a
mechanism that cells use to achieve a discrete number of mutually exclusive states in
response to environmental inputs. However, complex contextual connections of gene
regulatory networks in natural settings often impede the experimental establishment of
the function and dynamics of each specific gene network.
In this work, diverse synthetic gene networks are rationally designed and
constructed using well-characterized biological components to approach the cell fate
determination and state transition dynamics in multistable systems. Results show that
unimodality and bimodality and trimodality can be achieved through manipulation of the
signal and promoter crosstalk in quorum-sensing systems, which enables bacterial cells to
communicate with each other.
Moreover, a synthetic quadrastable circuit is also built and experimentally
demonstrated to have four stable steady states. Experiments, guided by mathematical
modeling predictions, reveal that sequential inductions generate distinct cell fates by
changing the landscape in sequence and hence navigating cells to different final states.
Circuit function depends on the specific protein expression levels in the circuit.
We then establish a protein expression predictor taking into account adjacent
transcriptional regions’ features through construction of ~120 synthetic gene circuits
(operons) in Escherichia coli. The predictor’s utility is further demonstrated in evaluating genes’ relative expression levels in construction of logic gates and tuning gene expressions and nonlinear dynamics of bistable gene networks.
These combined results illustrate applications of synthetic gene networks to
understand the cell fate determination and state transition dynamics in multistable
systems. A protein-expression predictor is also developed to evaluate and tune circuit
dynamics.
ContributorsWu, Fuqing (Author) / Wang, Xiao (Thesis advisor) / Haynes, Karmella (Committee member) / Marshall, Pamela (Committee member) / Nielsen, David (Committee member) / Brafman, David (Committee member) / Arizona State University (Publisher)
Created2017
Description
The advent of CRISPR/Cas9 revolutionized the field of genetic engineering and gave rise to the development of new gene editing tools including prime editing. Prime editing is a versatile gene editing method that mediates precise insertions and deletions and can perform all 12 types of point mutations. In turn, prime editing represents great promise in the design of new gene therapies and disease models where editing was previously not possible using current gene editing techniques. Despite advancements in genome modification technologies, parallel enrichment strategies of edited cells remain lagging behind in development. To this end, this project aimed to enhance prime editing using transient reporter for editing enrichment (TREE) technology to develop a method for the rapid generation of clonal isogenic cell lines for disease modeling. TREE uses an engineered BFP variant that upon a C-to-T conversion will convert to GFP after target modification. Using flow cytometry, this BFP-to-GFP conversion assay enables the isolation of edited cell populations via a fluorescent reporter of editing. Prime induced nucleotide engineering using a transient reporter for editing enrichment (PINE-TREE), pairs prime editing with TREE technology to efficiently enrich for prime edited cells. This investigation revealed PINE-TREE as an efficient editing and enrichment method compared to a conventional reporter of transfection (RoT) enrichment strategy. Here, PINE-TREE exhibited a significant increase in editing efficiencies of single nucleotide conversions, small insertions, and small deletions in multiple human cell types. Additionally, PINE-TREE demonstrated improved clonal cell editing efficiency in human induced pluripotent stem cells (hiPSCs). Most notably, PINE-TREE efficiently generated clonal isogenic hiPSCs harboring a mutation in the APOE gene for in vitro modeling of Alzheimer’s Disease. Collectively, results gathered from this study exhibited PINE-TREE as a valuable new tool in genetic engineering to accelerate the generation of clonal isogenic cell lines for applications in developmental biology, disease modeling, and drug screening.
ContributorsKostes, William Warner (Author) / Brafman, David (Thesis advisor) / Jacobs, Bertram (Committee member) / Lapinaite, Audrone (Committee member) / Tian, Xiaojun (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2022
Description
Over the past 20 years, the fields of synthetic biology and synthetic biosystems engineering have grown into mature disciplines, leading to significant breakthroughs in cancer research, diagnostics, cell-based medicines, biochemical production, etc. Application of mathematical modelling to biological and biochemical systems have not only given great insight into how these systems function, but also have lent enough predictive power to aid in the forward-engineering of synthetic constructs. However, progress has been impeded by several modes of context-dependence unique to biological and biochemical systems that are not seen in traditional engineering disciplines, resulting in the need for lengthy design-build-test cycles before functional prototypes are generated.In this work, two of these universal modes of context dependence – resource competition and growth feedback –their effects on synthetic gene circuits and potential control mechanisms, are studied and characterized. Results demonstrate that a novel competitive control architecture can be utilized to mitigate the effects of winner-take-all resource competition (a form of context dependence where distinct gene modules influence each other by competing over a shared pool of transcriptional/translational resources) in synthetic gene circuits and restore circuits to their intended function. Application of the fluctuation-dissipation theorem and rigorous stochastic simulations demonstrate that realistic resource constraints present in cells at the transcriptional and translational levels influence noise in gene circuits in a nonmonotonic fashion, either increasing or decreasing noise depending on the transcriptional/translational capacity.
Growth feedback on the other hand links circuit function to cellular growth rate via increased protein dilution rate during exponential growth phase. This in turn can result in the collapse of bistable gene circuits as the accelerated dilution rate forces switches in a high stable state to fall to a low stable state. Mathematical modelling and experimental data demonstrate that application of repressive links can insulate sensitive parts of gene circuits against growth-fluctuations and can in turn increase the robustness of multistable circuits in growth contexts.
The results presented in this work aid in the accumulation of understanding of biological and biochemical context dependence, and corresponding control strategies and design principles engineers can utilize to mitigate these effects.
ContributorsStone, Austin (Author) / Tian, Xiao-jun (Thesis advisor) / Wang, Xiao (Committee member) / Smith, Barbara (Committee member) / Kuang, Yang (Committee member) / Cheng, Albert (Committee member) / Arizona State University (Publisher)
Created2023
Description
Clustered regularly interspace short palindromic repeats (CRISPR) and CRISPR associated (Cas) technologies have become integral to genome editing. Canonical CRISPR-Cas9 systems function as a ribonucleic acid (RNA)-guided nucleases. Single guide RNAs (sgRNA) can be easily designed to target Cas9’s nuclease activity towards protospacer deoxyribonucleic acid (DNA) sequences. The relatively ease and efficiency of CRISPR-Cas9 systems has enabled numerous technologies and DNA manipulations. Genome engineering in human cell lines is centered around the study of genetic contribution to disease phenotypes. However, canonical CRISPR-Cas9 systems are largely reliant on double stranded DNA breaks (DSBs). DSBs can induce unintended genomic changes including deletions and complex rearrangements. Likewise, DSBs can induce apoptosis and cell cycle arrest confounding applications of Cas9-based systems for disease modeling. Base editors are a novel class of nicking Cas9 engineered with a cytidine or adenosine deaminase. Base editors can install single letter DNA edits without DSBs. However, detecting single letter DNA edits is cumbersome, requiring onerous DNA isolation and sequencing, hampering experimental throughput. This document describes the creation of a fluorescent reporter system to detect Cytosine-to-Thymine (C-to-T) base editing. The fluorescent reporter utilizes an engineered blue fluorescent protein (BFP) that is converted to green fluorescent protein (GFP) upon targeted C-to-T conversion. The BFP-to-GFP conversion enables the creation of a strategy to isolate edited cell populations, termed Transient Reporter for Editing Enrichment (TREE). TREE increases the ease of optimizing base editor designs and assists in editing cell types recalcitrant to DNA editing. More recently, Prime editing has been demonstrated to introduce user defined DNA edits without the need for DSBs and donor DNA. Prime editing requires specialized prime editing guide RNAs (pegRNAs). pegRNAs are however difficult to manually design. This document describes the creation of a software tool: Prime Induced Nucleotide Engineering Creator of New Edits (PINE-CONE). PINE-CONE rapidly designs pegRNAs based off basic edit information and will assist with synthetic biology and biomedical research.
ContributorsStandage-Beier, Kylie S (Author) / Wang, Xiao (Thesis advisor) / Brafman, David A (Committee member) / Tian, Xiao-jun (Committee member) / Nielsen, David R (Committee member) / Arizona State University (Publisher)
Created2023
Description
Two distinct aspects of synthetic biology were investigated: the development of viral structures for new methods of studying self-assembly and nanomanufacturing, and the designs of genetic controls systems based on controlling the secondary structure of nucleic acids. Viral structures have been demonstrated as building blocks for molecular self-assembly of diverse structures, but the ease with which viral genomes can be modified to create specific structures depends on the mechanisms by which the viral coat proteins self-assemble. The experiments conducted demonstrate how the mechanisms that guide bacteriophage lambda’s self-assembly make it a useful and flexible platform for further research into biologically enabled self-assembly. While the viral platform investigations focus on the creation of new structures, the genetic control systems research focuses on new methods for signal interpretation in biological systems. Regulators of genetic activity that operate based on the secondary structure formation of ribonucleic acid (RNA), also known as riboswitches, are genetically compact devices for controlling protein translation. The toehold switch ribodevice can be modified to enable multiplexed logical operations with RNA inputs, requiring no additional protein transcription factors to regulate activity, but they cannot receive chemical inputs. RNA sequences generated to bind to specific chemicals, known as aptamers, can be used in riboswitches to confer genetic activity upon binding their target chemical. But attempts to use aptamers for logical operations and genetic circuits are difficult to generalize due to differences in sequence and binding strength. The experiments conducted demonstrate a ribodevice structure in which aptamers can be used semi-interchangeably to translate chemical inputs into the toehold switch paradigm, marrying the programmability and orthogonality of toehold switches with the broad sensing potential of aptamer-based ribodevices.
ContributorsMcCutcheon, Griffin Cooper (Author) / Green, Alexander (Thesis advisor) / Hariadi, Rizal (Committee member) / Stephanopoulos, Nicholas (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2022