Matching Items (2)
Filtering by

Clear all filters

153035-Thumbnail Image.png
Description
Dimensional Metrology is the branch of science that determines length, angular, and geometric relationships within manufactured parts and compares them with required tolerances. The measurements can be made using either manual methods or sampled coordinate metrology (Coordinate measuring machines). Manual measurement methods have been in practice for a long time

Dimensional Metrology is the branch of science that determines length, angular, and geometric relationships within manufactured parts and compares them with required tolerances. The measurements can be made using either manual methods or sampled coordinate metrology (Coordinate measuring machines). Manual measurement methods have been in practice for a long time and are well accepted in the industry, but are slow for the present day manufacturing. On the other hand CMMs are relatively fast, but these methods are not well established yet. The major problem that needs to be addressed is the type of feature fitting algorithm used for evaluating tolerances. In a CMM the use of different feature fitting algorithms on a feature gives different values, and there is no standard that describes the type of feature fitting algorithm to be used for a specific tolerance. Our research is focused on identifying the feature fitting algorithm that is best used for each type of tolerance. Each algorithm is identified as the one to best represent the interpretation of geometric control as defined by the ASME Y14.5 standard and on the manual methods used for the measurement of a specific tolerance type. Using these algorithms normative procedures for CMMs are proposed for verifying tolerances. The proposed normative procedures are implemented as software. Then the procedures are verified by comparing the results from software with that of manual measurements.

To aid this research a library of feature fitting algorithms is developed in parallel. The library consists of least squares, Chebyshev and one sided fits applied on the features of line, plane, circle and cylinder. The proposed normative procedures are useful for evaluating tolerances in CMMs. The results evaluated will be in accordance to the standard. The ambiguity in choosing the algorithms is prevented. The software developed can be used in quality control for inspection purposes.
ContributorsVemulapalli, Prabath (Author) / Shah, Jami J. (Thesis advisor) / Davidson, Joseph K. (Committee member) / Takahashi, Timothy (Committee member) / Arizona State University (Publisher)
Created2014
154869-Thumbnail Image.png
Description
There is very little in the way of prescriptive procedures to guide designers in tolerance specification. This shortcoming motivated the group at Design Automation Lab to automate tolerancing of mechanical assemblies. GD&T data generated by the Auto-Tolerancing software is semantically represented using a neutral Constraint Tolerance Feature (CTF) graph file

There is very little in the way of prescriptive procedures to guide designers in tolerance specification. This shortcoming motivated the group at Design Automation Lab to automate tolerancing of mechanical assemblies. GD&T data generated by the Auto-Tolerancing software is semantically represented using a neutral Constraint Tolerance Feature (CTF) graph file format that is consistent with the ASME Y14.5 standard and the ISO STEP Part 21 file. The primary objective of this research is to communicate GD&T information from the CTF file to a neutral machine readable format. The latest STEP AP 242 (ISO 10303-242) “Managed model based 3D engineering“ aims to support smart manufacturing by capturing semantic Product Manufacturing Information (PMI) within the 3D model and also helping with long-term archiving of the product information. In line with the recommended practices published by CAx Implementor Forum, this research discusses the implementation of CTF to AP 242 translator. The input geometry available in STEP AP 203 format is pre-processed using STEP-NC DLL and 3D InterOp. While the former is initially used to attach persistent IDs to the topological entities in STEP, the latter retains the IDs during translation to ACIS entities for consumption by other modules in the Auto-tolerancing module. The associativity of GD&T available in CTF file to the input geometry is through persistent IDs. C++ libraries used for the translation to STEP AP 242 is provided by StepTools Inc through the STEP-NC DLL. Finally, the output STEP file is tested using available AP 242 readers and shows full conformance with the STEP standard. Using the output AP 242 file, semantic GDT data can now be automatically consumed by downstream applications such as Computer Aided Process Planning (CAPP), Computer Aided Inspection (CAI), Computer Aided Tolerance Systems (CATS) and Coordinate Measuring Machines (CMM).
ContributorsVenkiteswaran, Adarsh (Author) / Shah, Jami J. (Thesis advisor) / Hardwick, Martin (Committee member) / Davidson, Joseph K. (Committee member) / Arizona State University (Publisher)
Created2016