Matching Items (2)
Filtering by
- Creators: Barnaby, Hugh
Description
The advent of threshold logic simplifies the traditional Boolean logic to the single level multi-input function. Threshold logic latch (TLL), among implementations of threshold logic, is functionally equivalent to a multi-input function with an edge triggered flip-flop, which stands out to improve area and both dynamic and leakage power consumption, providing an appropriate design alternative. Accordingly, the TLL standard cell library is designed. Through technology mapping, hybrid circuit is generated by absorbing the logic cone backward from each flip-flip to get the smallest remaining feeder. With the scan test methodology adopted, design for testability (DFT) is proposed, including scan element design and scan chain insertion. Test synthesis flow is then introduced, according to the Cadence tool, RTL compiler. Test application is the process of applying vectors and the response analysis, which is mainly about the testbench design. A parameterized generic self-checking Verilog testbench is designed for static fault detection. Test development refers to the fault modeling, and test generation. Firstly, functional truth table test generation on TLL cells is proposed. Before the truth table test of the threshold function, the dependence of sequence of vectors applied, i.e., the dependence of current state on the previous state, should be eliminated. Transition test (dynamic pattern) on all weak inputs is proved to be able to test the reset function, which is supposed to erase the history in the reset phase before every evaluation phase. Remaining vectors in the truth table except the weak inputs are then applied statically (static pattern). Secondly, dynamic patterns for all weak inputs are proposed to detect structural transistor level faults analyzed in the TLL cell, with single fault assumption and stuck-at faults, stuck-on faults, and stuck-open faults under consideration. Containing those patterns, the functional test covers all testable structural faults inside the TLL. Thirdly, with the scope of the whole hybrid netlist, the procedure of test generation is proposed with three steps: scan chain test; test of feeders and other scan elements except TLLs; functional pattern test of TLL cells. Implementation of this procedure is discussed in the automatic test pattern generation (ATPG) chapter.
ContributorsHu, Yang (Author) / Vrudhula, Sarma (Thesis advisor) / Barnaby, Hugh (Committee member) / Yu, Shimeng (Committee member) / Arizona State University (Publisher)
Created2013
Description
Static CMOS logic has remained the dominant design style of digital systems for
more than four decades due to its robustness and near zero standby current. Static
CMOS logic circuits consist of a network of combinational logic cells and clocked sequential
elements, such as latches and flip-flops that are used for sequencing computations
over time. The majority of the digital design techniques to reduce power, area, and
leakage over the past four decades have focused almost entirely on optimizing the
combinational logic. This work explores alternate architectures for the flip-flops for
improving the overall circuit performance, power and area. It consists of three main
sections.
First, is the design of a multi-input configurable flip-flop structure with embedded
logic. A conventional D-type flip-flop may be viewed as realizing an identity function,
in which the output is simply the value of the input sampled at the clock edge. In
contrast, the proposed multi-input flip-flop, named PNAND, can be configured to
realize one of a family of Boolean functions called threshold functions. In essence,
the PNAND is a circuit implementation of the well-known binary perceptron. Unlike
other reconfigurable circuits, a PNAND can be configured by simply changing the
assignment of signals to its inputs. Using a standard cell library of such gates, a technology
mapping algorithm can be applied to transform a given netlist into one with
an optimal mixture of conventional logic gates and threshold gates. This approach
was used to fabricate a 32-bit Wallace Tree multiplier and a 32-bit booth multiplier
in 65nm LP technology. Simulation and chip measurements show more than 30%
improvement in dynamic power and more than 20% reduction in core area.
The functional yield of the PNAND reduces with geometry and voltage scaling.
The second part of this research investigates the use of two mechanisms to improve
the robustness of the PNAND circuit architecture. One is the use of forward and reverse body biases to change the device threshold and the other is the use of RRAM
devices for low voltage operation.
The third part of this research focused on the design of flip-flops with non-volatile
storage. Spin-transfer torque magnetic tunnel junctions (STT-MTJ) are integrated
with both conventional D-flipflop and the PNAND circuits to implement non-volatile
logic (NVL). These non-volatile storage enhanced flip-flops are able to save the state of
system locally when a power interruption occurs. However, manufacturing variations
in the STT-MTJs and in the CMOS transistors significantly reduce the yield, leading
to an overly pessimistic design and consequently, higher energy consumption. A
detailed analysis of the design trade-offs in the driver circuitry for performing backup
and restore, and a novel method to design the energy optimal driver for a given yield is
presented. Efficient designs of two nonvolatile flip-flop (NVFF) circuits are presented,
in which the backup time is determined on a per-chip basis, resulting in minimizing
the energy wastage and satisfying the yield constraint. To achieve a yield of 98%,
the conventional approach would have to expend nearly 5X more energy than the
minimum required, whereas the proposed tunable approach expends only 26% more
energy than the minimum. A non-volatile threshold gate architecture NV-TLFF are
designed with the same backup and restore circuitry in 65nm technology. The embedded
logic in NV-TLFF compensates performance overhead of NVL. This leads to the
possibility of zero-overhead non-volatile datapath circuits. An 8-bit multiply-and-
accumulate (MAC) unit is designed to demonstrate the performance benefits of the
proposed architecture. Based on the results of HSPICE simulations, the MAC circuit
with the proposed NV-TLFF cells is shown to consume at least 20% less power and
area as compared to the circuit designed with conventional DFFs, without sacrificing
any performance.
more than four decades due to its robustness and near zero standby current. Static
CMOS logic circuits consist of a network of combinational logic cells and clocked sequential
elements, such as latches and flip-flops that are used for sequencing computations
over time. The majority of the digital design techniques to reduce power, area, and
leakage over the past four decades have focused almost entirely on optimizing the
combinational logic. This work explores alternate architectures for the flip-flops for
improving the overall circuit performance, power and area. It consists of three main
sections.
First, is the design of a multi-input configurable flip-flop structure with embedded
logic. A conventional D-type flip-flop may be viewed as realizing an identity function,
in which the output is simply the value of the input sampled at the clock edge. In
contrast, the proposed multi-input flip-flop, named PNAND, can be configured to
realize one of a family of Boolean functions called threshold functions. In essence,
the PNAND is a circuit implementation of the well-known binary perceptron. Unlike
other reconfigurable circuits, a PNAND can be configured by simply changing the
assignment of signals to its inputs. Using a standard cell library of such gates, a technology
mapping algorithm can be applied to transform a given netlist into one with
an optimal mixture of conventional logic gates and threshold gates. This approach
was used to fabricate a 32-bit Wallace Tree multiplier and a 32-bit booth multiplier
in 65nm LP technology. Simulation and chip measurements show more than 30%
improvement in dynamic power and more than 20% reduction in core area.
The functional yield of the PNAND reduces with geometry and voltage scaling.
The second part of this research investigates the use of two mechanisms to improve
the robustness of the PNAND circuit architecture. One is the use of forward and reverse body biases to change the device threshold and the other is the use of RRAM
devices for low voltage operation.
The third part of this research focused on the design of flip-flops with non-volatile
storage. Spin-transfer torque magnetic tunnel junctions (STT-MTJ) are integrated
with both conventional D-flipflop and the PNAND circuits to implement non-volatile
logic (NVL). These non-volatile storage enhanced flip-flops are able to save the state of
system locally when a power interruption occurs. However, manufacturing variations
in the STT-MTJs and in the CMOS transistors significantly reduce the yield, leading
to an overly pessimistic design and consequently, higher energy consumption. A
detailed analysis of the design trade-offs in the driver circuitry for performing backup
and restore, and a novel method to design the energy optimal driver for a given yield is
presented. Efficient designs of two nonvolatile flip-flop (NVFF) circuits are presented,
in which the backup time is determined on a per-chip basis, resulting in minimizing
the energy wastage and satisfying the yield constraint. To achieve a yield of 98%,
the conventional approach would have to expend nearly 5X more energy than the
minimum required, whereas the proposed tunable approach expends only 26% more
energy than the minimum. A non-volatile threshold gate architecture NV-TLFF are
designed with the same backup and restore circuitry in 65nm technology. The embedded
logic in NV-TLFF compensates performance overhead of NVL. This leads to the
possibility of zero-overhead non-volatile datapath circuits. An 8-bit multiply-and-
accumulate (MAC) unit is designed to demonstrate the performance benefits of the
proposed architecture. Based on the results of HSPICE simulations, the MAC circuit
with the proposed NV-TLFF cells is shown to consume at least 20% less power and
area as compared to the circuit designed with conventional DFFs, without sacrificing
any performance.
ContributorsYang, Jinghua (Author) / Vrudhula, Sarma (Thesis advisor) / Barnaby, Hugh (Committee member) / Cao, Yu (Committee member) / Seo, Jae-Sun (Committee member) / Arizona State University (Publisher)
Created2018