Matching Items (7)
Filtering by
- Creators: Aiken, Leona S.
- Creators: Green, Samuel
- All Subjects: Quantitative Psychology and Psychometrics
Description
Fibromyalgia (FM) is a chronic pain condition characterized by debilitating fatigue. This study examined the dynamic relation between interpersonal enjoyment and fatigue in 102 partnered and 74 unpartnered women with FM. Participants provided three daily ratings for 21 days. They rated their fatigue in late morning and at the end of the day. Both partnered and unpartnered participants reported their interpersonal enjoyment in the combined familial, friendship, and work domains (COMBINED domain) in the afternoon. Additionally, partnered participants reported their interpersonal enjoyment in the spousal domain. The study was guided by three hypotheses at the within-person level, based on daily diaries: (1) elevated late morning fatigue would predict diminished afternoon interpersonal enjoyment; (2) diminished interpersonal enjoyment would predict elevated end-of-day fatigue; (3) interpersonal enjoyment would mediate the late morning to end-of-day fatigue relationship. In cross-level models, the study explored whether individual differences (between-person) in late morning fatigue and afternoon interpersonal enjoyment would moderate within-person relations from late morning fatigue to afternoon interpersonal enjoyment, and from afternoon interpersonal enjoyment to end-of-day fatigue. Furthermore, it explored whether the hypothesized relationships at the within-person level would also emerge at the between-person level (between-person mediation models). Multilevel structural equation modeling and multilevel modeling were employed for model testing, separately for partnered and unpartnered participants. Within-person mediation models supported that on high fatigue mornings, afternoon interpersonal enjoyment was dampened in the spousal and combined domains in partnered and unpartnered samples. Moreover, low afternoon interpersonal enjoyment in both the spousal and combined domains predicted elevated end-of-day fatigue. Afternoon interpersonal enjoyment mediated the relationship of late morning to end-of-day fatigue in the combined domain but in not the spousal domain. Cross-level moderation analyses showed that individual differences in afternoon spousal enjoyment moderated the day-to-day relation between afternoon spousal enjoyment and end-of-day fatigue. Finally, the mediational chain was not observed at the between-person level. These findings suggest that preserving interpersonal enjoyment in non-spousal relations limits within-day increases in FM fatigue. They highlight the importance of examining domain-specificity in interpersonal enjoyment when studying fatigue, and suggest that targeting enjoyment in social relations may improve the efficacy of existing treatments.
ContributorsYeung, Wan (Author) / Aiken, Leona S. (Thesis advisor) / Davis, Mary C. (Thesis advisor) / Mackinnon, David P (Committee member) / Zautra, Alex J (Committee member) / Arizona State University (Publisher)
Created2013
Description
This simulation study compared the utility of various discrepancy measures within a posterior predictive model checking (PPMC) framework for detecting different types of data-model misfit in multidimensional Bayesian network (BN) models. The investigated conditions were motivated by an applied research program utilizing an operational complex performance assessment within a digital-simulation educational context grounded in theories of cognition and learning. BN models were manipulated along two factors: latent variable dependency structure and number of latent classes. Distributions of posterior predicted p-values (PPP-values) served as the primary outcome measure and were summarized in graphical presentations, by median values across replications, and by proportions of replications in which the PPP-values were extreme. An effect size measure for PPMC was introduced as a supplemental numerical summary to the PPP-value. Consistent with previous PPMC research, all investigated fit functions tended to perform conservatively, but Standardized Generalized Dimensionality Discrepancy Measure (SGDDM), Yen's Q3, and Hierarchy Consistency Index (HCI) only mildly so. Adequate power to detect at least some types of misfit was demonstrated by SGDDM, Q3, HCI, Item Consistency Index (ICI), and to a lesser extent Deviance, while proportion correct (PC), a chi-square-type item-fit measure, Ranked Probability Score (RPS), and Good's Logarithmic Scale (GLS) were powerless across all investigated factors. Bivariate SGDDM and Q3 were found to provide powerful and detailed feedback for all investigated types of misfit.
ContributorsCrawford, Aaron (Author) / Levy, Roy (Thesis advisor) / Green, Samuel (Committee member) / Thompson, Marilyn (Committee member) / Arizona State University (Publisher)
Created2014
Description
Coarsely grouped counts or frequencies are commonly used in the behavioral sciences. Grouped count and grouped frequency (GCGF) that are used as outcome variables often violate the assumptions of linear regression as well as models designed for categorical outcomes; there is no analytic model that is designed specifically to accommodate GCGF outcomes. The purpose of this dissertation was to compare the statistical performance of four regression models (linear regression, Poisson regression, ordinal logistic regression, and beta regression) that can be used when the outcome is a GCGF variable. A simulation study was used to determine the power, type I error, and confidence interval (CI) coverage rates for these models under different conditions. Mean structure, variance structure, effect size, continuous or binary predictor, and sample size were included in the factorial design. Mean structures reflected either a linear relationship or an exponential relationship between the predictor and the outcome. Variance structures reflected homoscedastic (as in linear regression), heteroscedastic (monotonically increasing) or heteroscedastic (increasing then decreasing) variance. Small to medium, large, and very large effect sizes were examined. Sample sizes were 100, 200, 500, and 1000. Results of the simulation study showed that ordinal logistic regression produced type I error, statistical power, and CI coverage rates that were consistently within acceptable limits. Linear regression produced type I error and statistical power that were within acceptable limits, but CI coverage was too low for several conditions important to the analysis of counts and frequencies. Poisson regression and beta regression displayed inflated type I error, low statistical power, and low CI coverage rates for nearly all conditions. All models produced unbiased estimates of the regression coefficient. Based on the statistical performance of the four models, ordinal logistic regression seems to be the preferred method for analyzing GCGF outcomes. Linear regression also performed well, but CI coverage was too low for conditions with an exponential mean structure and/or heteroscedastic variance. Some aspects of model prediction, such as model fit, were not assessed here; more research is necessary to determine which statistical model best captures the unique properties of GCGF outcomes.
ContributorsCoxe, Stefany (Author) / Aiken, Leona S. (Thesis advisor) / West, Stephen G. (Thesis advisor) / Mackinnon, David P (Committee member) / Reiser, Mark R. (Committee member) / Arizona State University (Publisher)
Created2012
Description
This dissertation examines a planned missing data design in the context of mediational analysis. The study considered a scenario in which the high cost of an expensive mediator limited sample size, but in which less expensive mediators could be gathered on a larger sample size. Simulated multivariate normal data were generated from a latent variable mediation model with three observed indicator variables, M1, M2, and M3. Planned missingness was implemented on M1 under the missing completely at random mechanism. Five analysis methods were employed: latent variable mediation model with all three mediators as indicators of a latent construct (Method 1), auxiliary variable model with M1 as the mediator and M2 and M3 as auxiliary variables (Method 2), auxiliary variable model with M1 as the mediator and M2 as a single auxiliary variable (Method 3), maximum likelihood estimation including all available data but incorporating only mediator M1 (Method 4), and listwise deletion (Method 5).
The main outcome of interest was empirical power to detect the mediated effect. The main effects of mediation effect size, sample size, and missing data rate performed as expected with power increasing for increasing mediation effect sizes, increasing sample sizes, and decreasing missing data rates. Consistent with expectations, power was the greatest for analysis methods that included all three mediators, and power decreased with analysis methods that included less information. Across all design cells relative to the complete data condition, Method 1 with 20% missingness on M1 produced only 2.06% loss in power for the mediated effect; with 50% missingness, 6.02% loss; and 80% missingess, only 11.86% loss. Method 2 exhibited 20.72% power loss at 80% missingness, even though the total amount of data utilized was the same as Method 1. Methods 3 – 5 exhibited greater power loss. Compared to an average power loss of 11.55% across all levels of missingness for Method 1, average power losses for Methods 3, 4, and 5 were 23.87%, 29.35%, and 32.40%, respectively. In conclusion, planned missingness in a multiple mediator design may permit higher quality characterization of the mediator construct at feasible cost.
The main outcome of interest was empirical power to detect the mediated effect. The main effects of mediation effect size, sample size, and missing data rate performed as expected with power increasing for increasing mediation effect sizes, increasing sample sizes, and decreasing missing data rates. Consistent with expectations, power was the greatest for analysis methods that included all three mediators, and power decreased with analysis methods that included less information. Across all design cells relative to the complete data condition, Method 1 with 20% missingness on M1 produced only 2.06% loss in power for the mediated effect; with 50% missingness, 6.02% loss; and 80% missingess, only 11.86% loss. Method 2 exhibited 20.72% power loss at 80% missingness, even though the total amount of data utilized was the same as Method 1. Methods 3 – 5 exhibited greater power loss. Compared to an average power loss of 11.55% across all levels of missingness for Method 1, average power losses for Methods 3, 4, and 5 were 23.87%, 29.35%, and 32.40%, respectively. In conclusion, planned missingness in a multiple mediator design may permit higher quality characterization of the mediator construct at feasible cost.
ContributorsBaraldi, Amanda N (Author) / Enders, Craig K. (Thesis advisor) / Mackinnon, David P (Thesis advisor) / Aiken, Leona S. (Committee member) / Tein, Jenn-Yun (Committee member) / Arizona State University (Publisher)
Created2015
Description
In the past, it has been assumed that measurement and predictive invariance are consistent so that if one form of invariance holds the other form should also hold. However, some studies have proven that both forms of invariance only hold under certain conditions such as factorial invariance and invariance in the common factor variances. The present research examined Type I errors and the statistical power of a method that detects violations to the factorial invariant model in the presence of group differences in regression intercepts, under different sample sizes and different number of predictors (one or two). Data were simulated under two models: in model A only differences in the factor means were allowed, while model B violated invariance. A factorial invariant model was fitted to the data. Type I errors were defined as the proportion of samples in which the hypothesis of invariance was incorrectly rejected, and statistical power was defined as the proportion of samples in which the hypothesis of factorial invariance was correctly rejected. In the case of one predictor, the results show that the chi-square statistic has low power to detect violations to the model. Unexpected and systematic results were obtained regarding the negative unique variance in the predictor. It is proposed that negative unique variance in the predictor can be used as indication of measurement bias instead of the chi-square fit statistic with sample sizes of 500 or more. The results of the two predictor case show larger power. In both cases Type I errors were as expected. The implications of the results and some suggestions for increasing the power of the method are provided.
ContributorsAguilar, Margarita Olivera (Author) / Millsap, Roger E. (Thesis advisor) / Aiken, Leona S. (Committee member) / Enders, Craig K. (Committee member) / Arizona State University (Publisher)
Created2010
Description
For this thesis a Monte Carlo simulation was conducted to investigate the robustness of three latent interaction modeling approaches (constrained product indicator, generalized appended product indicator (GAPI), and latent moderated structural equations (LMS)) under high degrees of nonnormality of the exogenous indicators, which have not been investigated in previous literature. Results showed that the constrained product indicator and LMS approaches yielded biased estimates of the interaction effect when the exogenous indicators were highly nonnormal. When the violation of nonnormality was not severe (symmetric with excess kurtosis < 1), the LMS approach with ML estimation yielded the most precise latent interaction effect estimates. The LMS approach with ML estimation also had the highest statistical power among the three approaches, given that the actual Type-I error rates of the Wald and likelihood ratio test of interaction effect were acceptable. In highly nonnormal conditions, only the GAPI approach with ML estimation yielded unbiased latent interaction effect estimates, with an acceptable actual Type-I error rate of both the Wald test and likelihood ratio test of interaction effect. No support for the use of the Satorra-Bentler or Yuan-Bentler ML corrections was found across all three methods.
ContributorsCham, Hei Ning (Author) / West, Stephen G. (Thesis advisor) / Aiken, Leona S. (Committee member) / Enders, Craig K. (Committee member) / Arizona State University (Publisher)
Created2010
Description
The use of exams for classification purposes has become prevalent across many fields including professional assessment for employment screening and standards based testing in educational settings. Classification exams assign individuals to performance groups based on the comparison of their observed test scores to a pre-selected criterion (e.g. masters vs. nonmasters in dichotomous classification scenarios). The successful use of exams for classification purposes assumes at least minimal levels of accuracy of these classifications. Classification accuracy is an index that reflects the rate of correct classification of individuals into the same category which contains their true ability score. Traditional methods estimate classification accuracy via methods which assume that true scores follow a four-parameter beta-binomial distribution. Recent research suggests that Item Response Theory may be a preferable alternative framework for estimating examinees' true scores and may return more accurate classifications based on these scores. Researchers hypothesized that test length, the location of the cut score, the distribution of items, and the distribution of examinee ability would impact the recovery of accurate estimates of classification accuracy. The current simulation study manipulated these factors to assess their potential influence on classification accuracy. Observed classification as masters vs. nonmasters, true classification accuracy, estimated classification accuracy, BIAS, and RMSE were analyzed. In addition, Analysis of Variance tests were conducted to determine whether an interrelationship existed between levels of the four manipulated factors. Results showed small values of estimated classification accuracy and increased BIAS in accuracy estimates with few items, mismatched distributions of item difficulty and examinee ability, and extreme cut scores. A significant four-way interaction between manipulated variables was observed. In additional to interpretations of these findings and explanation of potential causes for the recovered values, recommendations that inform practice and avenues of future research are provided.
ContributorsKunze, Katie (Author) / Gorin, Joanna (Thesis advisor) / Levy, Roy (Thesis advisor) / Green, Samuel (Committee member) / Arizona State University (Publisher)
Created2013