Matching Items (12)
151723-Thumbnail Image.png
Description
The objective of the present investigations is to experimentally determine the fundamental molecular properties of the transient metal containing pieces. The transient molecules have been generated using laser ablation production technique and detected by using laser induced fluorescence technique. Ultra-high resolution spectra of the diatomic molecules, 87SrF, 135&137BaF, YbF, HfF,

The objective of the present investigations is to experimentally determine the fundamental molecular properties of the transient metal containing pieces. The transient molecules have been generated using laser ablation production technique and detected by using laser induced fluorescence technique. Ultra-high resolution spectra of the diatomic molecules, 87SrF, 135&137BaF, YbF, HfF, and IrSi were recorded at a resolution of approximately 30 Mhz. The fine and hyperfine structure of these molecules were determined for the ground and the excited state. The optical Stark splittings of 180HfF and IrSi were recorded and analyzed to determine the permanent electric dipole moments of the ground and the excited state. An effective Hamiltonian operator, including the rotational, centrifugal distortion, spin-orbit, spin-spin, spin-rotation, Λ-doubling, magnetic hyperfine and quadrupole interactions, and Stark effect, was employed to model and analyze the recorded spectra. The electronic spectra of the triatomic molecules, TiO2 and ZrO2, were recorded using pulsed dye laser, LIF, spectrometer at a resolution of 300MHz. These molecules have C2v symmetry. The harmonic frequencies, lifetime measurements were determined. These spectra of ZrO2 and TiO2 were modeled using a normal coordinate analysis and Franck-Condon factor predictions. High resolution field-free and Stark effect spectra of ZrO2 were recorded and for future investigation.
ContributorsLe, Anh Thun (Author) / Steimle, Timothy C (Thesis advisor) / Richert, Ranko (Committee member) / Chizmeshya, Andrew (Committee member) / Arizona State University (Publisher)
Created2013
151277-Thumbnail Image.png
Description
This thesis describes the studies for two groups of molecules in the gas-phase: (a) copper monofluoride (CuF) and copper hydroxide (CuOH); (b) thorium monoxide (ThO) and tungsten carbide (WC). Copper-containing molecules (Group a) are selected to investigate the ionic bonding in transition metal-containing molecules because they have a relatively simple

This thesis describes the studies for two groups of molecules in the gas-phase: (a) copper monofluoride (CuF) and copper hydroxide (CuOH); (b) thorium monoxide (ThO) and tungsten carbide (WC). Copper-containing molecules (Group a) are selected to investigate the ionic bonding in transition metal-containing molecules because they have a relatively simple electronic state distribution due to the nearly filled 3d-orbital. ThO and WC (Group b) are in support of particle physics for the determination of electron electric dipole moment (eEDM), de, the existence of which indicates new physics beyond the Standard Model. The determination of the tiny eEDM requires large electric fields applied to the electron. The 3(Delta)1 states for heavy polar molecules were proposed [E. R. Meyer, J. L. Bohn, and M. P. Deskevich, Phys. Rev. A 73, 062108 (2006)] to determine de with the following attractive features: (1) large electric dipole moments; (2) large internal electric fields, Eeff, experienced by valence electrons; (3) nearly degenerate omega-doublets; (4) extremely small magnetic dipole moments. The H3(Delta)1 state for ThO and the X3(Delta)1 state for WC are both good candidates. Spectroscopic parameters (i.e. molecular electric and magnetic dipole moments, omega-doubling parameters, etc) are required for the 3(Delta)1 states of ThO and WC. High resolution optical spectra (linewidth ~50 MHz) of CuF, CuOH, ThO and WC were recorded field-free and in the presence of a static electric field (or magnetic field) using laser ablation source/supersonic expansion and laser induced fluorescence (LIF) detection. The spectra were modeled by a zero-field effective Hamiltonian operator and a Stark (or Zeeman) Hamiltonian operator with various molecular parameters. The determined molecular parameters are compared to theoretical predictions. The small omega-doubling parameter was well determined using the pump/probe microwave optical double resonance (PPMODR) technique with a much higher resolution (linewidth ~60 kHz) than optical spectroscopy. In addition to the above mentioned studies of the two groups of molecules, a resonance enhanced multi-photon ionization (REMPI) combined with a time-of-flight mass spectrometer (TOFMS) has been developed to identify the molecules responsible for observed LIF signals. The operation of this spectrometer has been tested by recording the mass spectrum of Ti/O2 and the REMPI spectrum for TiO using a two-color excitation scheme.
ContributorsWang, Fang (Author) / Steimle, Timothy C (Thesis advisor) / Chizmeshya, Andrew (Committee member) / Wolf, George (Committee member) / Arizona State University (Publisher)
Created2012
152677-Thumbnail Image.png
Description
Organic optoelectronic devices have remained a research topic of great interest over the past two decades, particularly in the development of efficient organic photovoltaics (OPV) and organic light emitting diodes (OLED). In order to improve the efficiency, stability, and materials variety for organic optoelectronic devices a number of emitting materials,

Organic optoelectronic devices have remained a research topic of great interest over the past two decades, particularly in the development of efficient organic photovoltaics (OPV) and organic light emitting diodes (OLED). In order to improve the efficiency, stability, and materials variety for organic optoelectronic devices a number of emitting materials, absorbing materials, and charge transport materials were developed and employed in a device setting. Optical, electrical, and photophysical studies of the organic materials and their corresponding devices were thoroughly carried out. Two major approaches were taken to enhance the efficiency of small molecule based OPVs: developing material with higher open circuit voltages or improved device structures which increased short circuit current. To explore the factors affecting the open circuit voltage (VOC) in OPVs, molecular structures were modified to bring VOC closer to the effective bandgap, ∆EDA, which allowed the achievement of 1V VOC for a heterojunction of a select Ir complex with estimated exciton energy of only 1.55eV. Furthermore, the development of anode interfacial layer for exciton blocking and molecular templating provide a general approach for enhancing the short circuit current. Ultimately, a 5.8% PCE was achieved in a single heterojunction of C60 and a ZnPc material prepared in a simple, one step, solvent free, synthesis. OLEDs employing newly developed deep blue emitters based on cyclometalated complexes were demonstrated. Ultimately, a peak EQE of 24.8% and nearly perfect blue emission of (0.148,0.079) was achieved from PtON7dtb, which approaches the maximum attainable performance from a blue OLED. Furthermore, utilizing the excimer formation properties of square-planar Pt complexes, highly efficient and stable white devices employing a single emissive material were demonstrated. A peak EQE of over 20% for pure white color (0.33,0.33) and 80 CRI was achieved with the tridentate Pt complex, Pt-16. Furthermore, the development of a series of tetradentate Pt complexes yielded highly efficient and stable single doped white devices due to their halogen free tetradentate design. In addition to these benchmark achievements, the systematic molecular modification of both emissive and absorbing materials provides valuable structure-property relationship information that should help guide further developments in the field.
ContributorsFleetham, Tyler Blain (Author) / Li, Jian (Thesis advisor) / Alford, Terry (Committee member) / Adams, James (Committee member) / Arizona State University (Publisher)
Created2014
152875-Thumbnail Image.png
Description
Protein-surface interactions, no matter structured or unstructured, are important in both biological and man-made systems. Unstructured interactions are more difficult to study with conventional techniques due to the lack of a specific binding structure. In this dissertation, a novel approach is employed to study the unstructured interactions between proteins and

Protein-surface interactions, no matter structured or unstructured, are important in both biological and man-made systems. Unstructured interactions are more difficult to study with conventional techniques due to the lack of a specific binding structure. In this dissertation, a novel approach is employed to study the unstructured interactions between proteins and heterogonous surfaces, by looking at a large number of different binding partners at surfaces and using the binding information to understand the chemistry of binding. In this regard, surface-bound peptide arrays are used as a model for the study. Specifically, in Chapter 2, the effects of charge, hydrophobicity and length of surface-bound peptides on binding affinity for specific globular proteins (&beta-galactosidase and &alpha1-antitrypsin) and relative binding of different proteins were examined with LC Sciences peptide array platform. While the general charge and hydrophobicity of the peptides are certainly important, more surprising is that &beta-galactosidase affinity for the surface does not simply increase with the length of the peptide. Another interesting observation that leads to the next part of the study is that even very short surface-bound peptides can have both strong and selective interactions with proteins. Hence, in Chapter 3, selected tetrapeptide sequences with known binding characteristics to &beta-galactosidase are used as building blocks to create longer sequences to see if the binding function can be added together. The conclusion is that while adding two component sequences together can either greatly increase or decrease overall binding and specificity, the contribution to the binding affinity and specificity of the individual binding components is strongly dependent on their position in the peptide. Finally, in Chapter 4, another array platform is utilized to overcome the limitations associated with LC Sciences. It is found that effects of peptide sequence properties on IgG binding with HealthTell array are quiet similar to what was observed with &beta-galactosidase on LC Science array surface. In summary, the approach presented in this dissertation can provide binding information for both structured and unstructured interactions taking place at complex surfaces and has the potential to help develop surfaces covered with specific short peptide sequences with relatively specific protein interaction profiles.
ContributorsWang, Wei (Author) / Woodbury, Neal W (Thesis advisor) / Liu, Yan (Committee member) / Chaput, John (Committee member) / Arizona State University (Publisher)
Created2014
156536-Thumbnail Image.png
Description
New forms of carbon are being discovered at a rapid rate and prove to be on the frontier of cutting edge technology. Carbon possesses three energetically competitive forms of orbital hybridization, leading to exceptional blends of properties unseen in other materials. Fascinating properties found among carbon allotropes, such as, fullerenes,

New forms of carbon are being discovered at a rapid rate and prove to be on the frontier of cutting edge technology. Carbon possesses three energetically competitive forms of orbital hybridization, leading to exceptional blends of properties unseen in other materials. Fascinating properties found among carbon allotropes, such as, fullerenes, carbon nanotubes, and graphene have led to new and exciting advancement, with recent applications in defense, energy storage, construction, and electronics. Various combinations of extreme strength, high electrical and thermal conductivity, flexibility, and light weight have led to new durable and flexible display screens, optoelectronics, quantum computing, and strength enhancer coating. The quest for new carbon allotropes and future application persists.

Despite the advances in carbon-based technology, researchers have been limited to sp3 and sp2 hybridizations. While sp3 and sp2 hybridizations of carbon are well established and understood, the simplest sp1 hybridized carbon allotrope, carbyne, has been impossible to synthesize and remains elusive. This dissertation presents recent results in characterizing a new sp1 carbon material produced from using pulsed laser ablation in liquid (PLAL) to ablate a gold surface that is immersed in a carbon rich liquid. The PLAL technique provides access to extremely non-thermal environmental conditions where unexplored chemical reactions occur and can be explored to access the production of new materials. A combination of experimental and theoretical results suggests gold clusters can act as stabilizing agents as they react and adsorb onto the surface of one dimensional carbon chains to form a new class of materials termed “pseudocarbynes”. Data from several characterization techniques, including Raman spectroscopy, UV/VIS spectroscopy, and transmission electron microscopy (TEM), provide evidence for the existence of pseudocarbyne. This completely new material may possess outstanding properties, a trend seen among carbon allotropes, that can further scientific advancements.
ContributorsFujikado, Nancy (Author) / Sayres, Scott G (Thesis advisor) / Rege, Kaushal (Thesis advisor) / Green, Matthew D (Committee member) / Arizona State University (Publisher)
Created2018
141315-Thumbnail Image.png
Description

The majority of trust research has focused on the benefits trust can have for individual actors, institutions, and organizations. This “optimistic bias” is particularly evident in work focused on institutional trust, where concepts such as procedural justice, shared values, and moral responsibility have gained prominence. But trust in institutions may

The majority of trust research has focused on the benefits trust can have for individual actors, institutions, and organizations. This “optimistic bias” is particularly evident in work focused on institutional trust, where concepts such as procedural justice, shared values, and moral responsibility have gained prominence. But trust in institutions may not be exclusively good. We reveal implications for the “dark side” of institutional trust by reviewing relevant theories and empirical research that can contribute to a more holistic understanding. We frame our discussion by suggesting there may be a “Goldilocks principle” of institutional trust, where trust that is too low (typically the focus) or too high (not usually considered by trust researchers) may be problematic. The chapter focuses on the issue of too-high trust and processes through which such too-high trust might emerge. Specifically, excessive trust might result from external, internal, and intersecting external-internal processes. External processes refer to the actions institutions take that affect public trust, while internal processes refer to intrapersonal factors affecting a trustor’s level of trust. We describe how the beneficial psychological and behavioral outcomes of trust can be mitigated or circumvented through these processes and highlight the implications of a “darkest” side of trust when they intersect. We draw upon research on organizations and legal, governmental, and political systems to demonstrate the dark side of trust in different contexts. The conclusion outlines directions for future research and encourages researchers to consider the ethical nuances of studying how to increase institutional trust.

ContributorsNeal, Tess M.S. (Author) / Shockley, Ellie (Author) / Schilke, Oliver (Author)
Created2016
168483-Thumbnail Image.png
Description
All known life requires three main metabolic components to grow: an energy source, an electron source, and a carbon source. For energy, an organism can use light or chemical reactions. For electrons, an organism can use metals or organic molecules. For carbon, an organism can use organic or inorganic carbon.

All known life requires three main metabolic components to grow: an energy source, an electron source, and a carbon source. For energy, an organism can use light or chemical reactions. For electrons, an organism can use metals or organic molecules. For carbon, an organism can use organic or inorganic carbon. Life has adapted to use any mixture of the endpoints for each of the three metabolic components. Understanding how these components are incorporated in a living bacterium on Earth in modern times is relatively straight forward. This becomes much more complicated when trying to determine what metabolisms may have been used in ancient times on Earth or potential novel metabolisms that exist on other planets. One way to examine these possibilities is by creating genetically modified mutant bacteria that have novel metabolisms or proposed ancient metabolisms to study. This thesis is the beginning of a broader study to understand novel metabolisms using Heliobacteria modesticaldum. H. modesticaldum was grown under different environmental conditions to isolate the impacts of energy, electron, and carbon sources on carbon and nitrogen isotope fractionation. Additionally, the wild type and a novel mutant H. modesticaldum were compared to measure the effects of specific enzymes on carbon and nitrogen isotope fractionation. By forcing the bacterium to adapt to different conditions, variation in carbon and nitrogen content and isotopic signature are detected. Specifically, by forcing the bacterium to fix nitrogen as opposed to nitrogen incorporation, the isotopic signature of the bacterium had a noticeable change. Themutant H. modesticaldum also had a different isotopic signature than the wild type. Without the enzyme citrate synthase, H. modesticaldum had to adapt its carbon metabolic cycle, creating a measurable carbon isotope fractionation. The results described here offer new insight into the effects of metabolism on carbon and nitrogen fractionation of ancient or novel organisms.
ContributorsElms, Nicholas (Author) / Hartnett, Hilairy E (Thesis advisor) / Redding, Kevin (Committee member) / Trembath-Reichert, Elizabeth (Committee member) / Anbar, Ariel D (Committee member) / Arizona State University (Publisher)
Created2021
171880-Thumbnail Image.png
Description
Molecular Dynamics (MD) simulations are ubiquitous throughout the physical sci-ences; they are critical in understanding how particle structures evolve over time given a particular energy function. A software package called ParSplice introduced a new method to generate these simulations in parallel that has significantly inflated their length. Typically, simulations are short discrete Markov

Molecular Dynamics (MD) simulations are ubiquitous throughout the physical sci-ences; they are critical in understanding how particle structures evolve over time given a particular energy function. A software package called ParSplice introduced a new method to generate these simulations in parallel that has significantly inflated their length. Typically, simulations are short discrete Markov chains, only captur- ing a few microseconds of a particle’s behavior and containing tens of thousands of transitions between states; in contrast, a typical ParSplice simulation can be as long as a few milliseconds, containing tens of millions of transitions. Naturally, sifting through data of this size is impossible by hand, and there are a number of visualiza- tion systems that provide comprehensive and intuitive analyses of particle structures throughout MD simulations. However, no visual analytics systems have been built that can manage the simulations that ParSplice produces. To analyze these large data-sets, I built a visual analytics system that provides multiple coordinated views that simultaneously describe the data temporally, within its structural context, and based on its properties. The system provides fluid and powerful user interactions regardless of the size of the data, allowing the user to drill down into the data-set to get detailed insights, as well as run and save various calculations, most notably the Nudged Elastic Band method. The system also allows the comparison of multiple trajectories, revealing more information about the general behavior of particles at different temperatures, energy states etc.
ContributorsHnatyshyn, Rostyslav (Author) / Maciejewski, Ross (Thesis advisor) / Bryan, Chris (Committee member) / Ahrens, James (Committee member) / Arizona State University (Publisher)
Created2022
Description
This study aims to address the deficiencies of the Marcus model of electron transfer

(ET) and then provide modifications to the model. A confirmation of the inverted energy

gap law, which is the cleanest verification so far, is presented for donor-acceptor complexes.

In addition to the macroscopic properties of the solvent, the physical

This study aims to address the deficiencies of the Marcus model of electron transfer

(ET) and then provide modifications to the model. A confirmation of the inverted energy

gap law, which is the cleanest verification so far, is presented for donor-acceptor complexes.

In addition to the macroscopic properties of the solvent, the physical properties of the solvent

are incorporated in the model via the microscopic solvation model. For the molecules

studied in this dissertation, the rate constant first increases with cooling, in contrast to the

prediction of the Arrhenius law, and then decreases at lower temperatures. Additionally,

the polarizability of solute, which was not considered in the original Marcus theory, is included

by the Q-model of ET. Through accounting for the polarizability of the reactants, the

Q-model offers an important design principle for achieving high performance solar energy

conversion materials. By means of the analytical Q-model of ET, it is shown that including

molecular polarizability of C60 affects the reorganization energy and the activation barrier

of ET reaction.

The theory and Electrochemistry of Ferredoxin and Cytochrome c are also investigated.

By providing a new formulation for reaction reorganization energy, a long-standing disconnect

between the results of atomistic simulations and cyclic voltametery experiments is

resolved. The significant role of polarizability of enzymes in reducing the activation energy

of ET is discussed. The binding/unbinding of waters to the active site of Ferredoxin leads

to non-Gaussian statistics of energy gap and result in a smaller activation energy of ET.

Furthermore, the dielectric constant of water at the interface of neutral and charged

C60 is studied. The dielectric constant is found to be in the range of 10 to 22 which is

remarkably smaller compared to bulk water( 80). Moreover, the interfacial structural

crossover and hydration thermodynamic of charged C60 in water is studied. Increasing the

charge of the C60 molecule result in a dramatic structural transition in the hydration shell,

which lead to increase in the population of dangling O-H bonds at the interface.
ContributorsWaskasi, Morteza M (Author) / Matyushov, Dmitry (Thesis advisor) / Richert, Ranko (Committee member) / Heyden, Matthias (Committee member) / Beckstein, Oliver (Committee member) / Arizona State University (Publisher)
Created2019
158750-Thumbnail Image.png
Description
Polyurea is a highly versatile material used in coatings and armor systems to protect against extreme conditions such as ballistic impact, cavitation erosion, and blast loading. However, the relationships between microstructurally-dependent deformation mechanisms and the mechanical properties of polyurea are not yet fully understood, especially under extreme conditions. In this

Polyurea is a highly versatile material used in coatings and armor systems to protect against extreme conditions such as ballistic impact, cavitation erosion, and blast loading. However, the relationships between microstructurally-dependent deformation mechanisms and the mechanical properties of polyurea are not yet fully understood, especially under extreme conditions. In this work, multi-scale coarse-grained models are developed to probe molecular dynamics across the wide range of time and length scales that these fundamental deformation mechanisms operate. In the first of these models, a high-resolution coarse-grained model of polyurea is developed, where similar to united-atom models, hydrogen atoms are modeled implicitly. This model was trained using a modified iterative Boltzmann inversion method that dramatically reduces the number of iterations required. Coarse-grained simulations using this model demonstrate that multiblock systems evolve to form a more interconnected hard phase, compared to the more interrupted hard phase composed of distinct ribbon-shaped domains found in diblock systems. Next, a reactive coarse-grained model is developed to simulate the influence of the difference in time scales for step-growth polymerization and phase segregation in polyurea. Analysis of the simulated cured polyurea systems reveals that more rapid reaction rates produce a smaller diameter ligaments in the gyroidal hard phase as well as increased covalent bonding connecting the hard domain ligaments as evidenced by a larger fraction of bridging segments and larger mean radius of gyration of the copolymer chains. The effect that these processing-induced structural variations have on the mechanical properties of the polymer was tested by simulating uniaxial compression, which revealed that the higher degree of hard domain connectivity leads to a 20% increase in the flow stress. A hierarchical multiresolution framework is proposed to fully link coarse-grained molecular simulations across a broader range of time scales, in which a family of coarse-grained models are developed. The models are connected using an incremental reverse–mapping scheme allowing for long time scale dynamics simulated at a highly coarsened resolution to be passed all the way to an atomistic representation.
ContributorsLiu, Minghao (Author) / Oswald, Jay (Thesis advisor) / Muhich, Christopher (Committee member) / Jiang, Hanqing (Committee member) / Peralta, Pedro (Committee member) / Jiao, Yang (Committee member) / Arizona State University (Publisher)
Created2020