Matching Items (14)
Filtering by
- Genre: Academic theses
Description
Modern day gas turbine designers face the problem of hot mainstream gas ingestion into rotor-stator disk cavities. To counter this ingestion, seals are installed on the rotor and stator disk rims and purge air, bled off from the compressor, is injected into the cavities. It is desirable to reduce the supply of purge air as this decreases the net power output as well as efficiency of the gas turbine. Since the purge air influences the disk cavity flow field and effectively the amount of ingestion, the aim of this work was to study the cavity velocity field experimentally using Particle Image Velocimetry (PIV). Experiments were carried out in a model single-stage axial flow turbine set-up that featured blades as well as vanes, with purge air supplied at the hub of the rotor-stator disk cavity. Along with the rotor and stator rim seals, an inner labyrinth seal was provided which split the disk cavity into a rim cavity and an inner cavity. First, static gage pressure distribution was measured to ensure that nominally steady flow conditions had been achieved. The PIV experiments were then performed to map the velocity field on the radial-tangential plane within the rim cavity at four axial locations. Instantaneous velocity maps obtained by PIV were analyzed sector-by-sector to understand the rim cavity flow field. It was observed that the tangential velocity dominated the cavity flow at low purge air flow rate, its dominance decreasing with increase in the purge air flow rate. Radially inboard of the rim cavity, negative radial velocity near the stator surface and positive radial velocity near the rotor surface indicated the presence of a recirculation region in the cavity whose radial extent increased with increase in the purge air flow rate. Qualitative flow streamline patterns are plotted within the rim cavity for different experimental conditions by combining the PIV map information with ingestion measurements within the cavity as reported in Thiagarajan (2013).
ContributorsPathak, Parag (Author) / Roy, Ramendra P (Thesis advisor) / Calhoun, Ronald (Committee member) / Lee, Taewoo (Committee member) / Arizona State University (Publisher)
Created2013
Description
In order to cope with the decreasing availability of symphony jobs and collegiate faculty positions, many musicians are starting to pursue less traditional career paths. Also, to combat declining audiences, musicians are exploring ways to cultivate new and enthusiastic listeners through relevant and engaging performances. Due to these challenges, many community-based chamber music ensembles have been formed throughout the United States. These groups not only focus on performing classical music, but serve the needs of their communities as well. The problem, however, is that many musicians have not learned the business skills necessary to create these career opportunities. In this document I discuss the steps ensembles must take to develop sustainable careers. I first analyze how groups build a strong foundation through getting to know their communities and creating core values. I then discuss branding and marketing so ensembles can develop a public image and learn how to publicize themselves. This is followed by an investigation of how ensembles make and organize their money. I then examine the ways groups ensure long-lasting relationships with their communities and within the ensemble. I end by presenting three case studies of professional ensembles to show how groups create and maintain successful careers. Ensembles must develop entrepreneurship skills in addition to cultivating their artistry. These business concepts are crucial to the longevity of chamber groups. Through interviews of successful ensemble members and my own personal experiences in the Tetra String Quartet, I provide a guide for musicians to use when creating a community-based ensemble.
ContributorsDalbey, Jenna (Author) / Landschoot, Thomas (Thesis advisor) / McLin, Katherine (Committee member) / Ryan, Russell (Committee member) / Solis, Theodore (Committee member) / Spring, Robert (Committee member) / Arizona State University (Publisher)
Created2013
Description
American Primitive is a composition written for wind ensemble with an instrumentation of flute, oboe, clarinet, bass clarinet, alto, tenor, and baritone saxophones, trumpet, horn, trombone, euphonium, tuba, piano, and percussion. The piece is approximately twelve minutes in duration and was written September - December 2013. American Primitive is absolute music (i.e. it does not follow a specific narrative) comprising blocks of distinct, contrasting gestures which bookend a central region of delicate textural layering and minimal gestural contrast. Though three gestures (a descending interval followed by a smaller ascending interval, a dynamic swell, and a chordal "chop") were consciously employed throughout, it is the first gesture of the three that creates a sense of unification and overall coherence to the work. Additionally, the work challenges listeners' expectations of traditional wind ensemble music by featuring the trumpet as a quasi-soloist whose material is predominately inspired by transcriptions of jazz solos. This jazz-inspired material is at times mimicked and further developed by the ensemble, also often in a soloistic manner while the trumpet maintains its role throughout. This interplay of dialogue between the "soloists" and the "ensemble" further skews listeners' conceptions of traditional wind ensemble music by featuring almost every instrument in the ensemble. Though the term "American Primitive" is usually associated with the "naïve art" movement, it bears no association to the music presented in this work. Instead, the term refers to the author's own compositional attitudes, education, and aesthetic interests.
ContributorsJandreau, Joshua (Composer) / Rockmaker, Jody D (Thesis advisor) / Rogers, Rodney I (Committee member) / Demars, James R (Committee member) / Arizona State University (Publisher)
Created2014
Description
This project is a practical annotated bibliography of original works for oboe trio with the specific instrumentation of two oboes and English horn. Presenting descriptions of 116 readily available oboe trios, this project is intended to promote awareness, accessibility, and performance of compositions within this genre.
The annotated bibliography focuses exclusively on original, published works for two oboes and English horn. Unpublished works, arrangements, works that are out of print and not available through interlibrary loan, or works that feature slightly altered instrumentation are not included.
Entries in this annotated bibliography are listed alphabetically by the last name of the composer. Each entry includes the dates of the composer and a brief biography, followed by the title of the work, composition date, commission, and dedication of the piece. Also included are the names of publishers, the length of the entire piece in minutes and seconds, and an incipit of the first one to eight measures for each movement of the work.
In addition to providing a comprehensive and detailed bibliography of oboe trios, this document traces the history of the oboe trio and includes biographical sketches of each composer cited, allowing readers to place the genre of oboe trios and each individual composition into its historical context. Four appendices at the end include a list of trios arranged alphabetically by composer's last name, chronologically by the date of composition, and by country of origin and a list of publications of Ludwig van Beethoven's oboe trios from the 1940s and earlier.
The annotated bibliography focuses exclusively on original, published works for two oboes and English horn. Unpublished works, arrangements, works that are out of print and not available through interlibrary loan, or works that feature slightly altered instrumentation are not included.
Entries in this annotated bibliography are listed alphabetically by the last name of the composer. Each entry includes the dates of the composer and a brief biography, followed by the title of the work, composition date, commission, and dedication of the piece. Also included are the names of publishers, the length of the entire piece in minutes and seconds, and an incipit of the first one to eight measures for each movement of the work.
In addition to providing a comprehensive and detailed bibliography of oboe trios, this document traces the history of the oboe trio and includes biographical sketches of each composer cited, allowing readers to place the genre of oboe trios and each individual composition into its historical context. Four appendices at the end include a list of trios arranged alphabetically by composer's last name, chronologically by the date of composition, and by country of origin and a list of publications of Ludwig van Beethoven's oboe trios from the 1940s and earlier.
ContributorsSassaman, Melissa Ann (Author) / Schuring, Martin (Thesis advisor) / Buck, Elizabeth (Committee member) / Holbrook, Amy (Committee member) / Hill, Gary (Committee member) / Arizona State University (Publisher)
Created2014
Description
The repertoire for guitar and piano duo is small in comparison with other chamber music instrumentation; therefore, it is important to broaden this repertoire. In addition to creating original compositions, arrangements of existing works contribute to this expansion.
This project focuses on an arrangement of Bachianas Brasileiras No. 1 by Brazilian composer Heitor Villa-Lobos (1887-1959), a work originally conceived for cello ensemble with a minimum of eight cellos. In order to contextualize the proposed arrangement, this study contains a brief historical listing of the repertoire for guitar and piano duo and of the guitar works by Villa-Lobos. Also, it includes a description of the Bachianas Brasileiras series and a discussion of the arranging methodology that shows how the original musical ideas of the composer were adapted using techniques that are idiomatic to the guitar and piano. The full arrangement is included in Appendix A.
This project focuses on an arrangement of Bachianas Brasileiras No. 1 by Brazilian composer Heitor Villa-Lobos (1887-1959), a work originally conceived for cello ensemble with a minimum of eight cellos. In order to contextualize the proposed arrangement, this study contains a brief historical listing of the repertoire for guitar and piano duo and of the guitar works by Villa-Lobos. Also, it includes a description of the Bachianas Brasileiras series and a discussion of the arranging methodology that shows how the original musical ideas of the composer were adapted using techniques that are idiomatic to the guitar and piano. The full arrangement is included in Appendix A.
ContributorsFigueiredo Bartoloni, Fabio (Author) / Koonce, Frank (Thesis advisor) / Suzuki, Kotoka (Committee member) / Landschoot, Thomas (Committee member) / Arizona State University (Publisher)
Created2016
Description
Phantom Sun is a ten-minute piece in three sections, and is composed for flute, clarinet in b-flat, violin, cello, and percussion. The three-part structure for this work is a representation of the atmospheric phenomenon after which the composition is named. A phantom sun, also called a parhelion or sundog, is a weather-related phenomenon caused by the horizontal refraction of sunlight in the upper atmosphere. This refraction creates the illusion of three suns above the horizon, and is often accompanied by a bright halo called the circumzenithal arc. The halo is caused by light bending at 22° as it passes through hexagonal ice crystals. Consequently, the numbers six and 22 are important figures, and have been encoded into this piece in various ways.
The first section, marked “With concentrated intensity,” is characterized by the juxtaposition of tonal ambiguity and tonal affirmation, as well as the use of polymetric counterpoint (often 7/8 against 4/4 or 7/8 against 3/4). The middle section, marked “Crystalline,” provides contrast in its use of unmetered sections and independent tempos. The refraction of light is represented in this movement by a 22-note row based on a hexachord (B-flat, F, C, G, A, E) introduced in measure 164 of the first section. The third section, marked “With frenetic energy,” begins without pause on an arresting entrance of the drums playing an additive rhythmic pattern. This pattern (5+7+9+1) amounts to 22 eighth-note pulses and informs much of the motivic and structural considerations for the remainder of the piece.
The first section, marked “With concentrated intensity,” is characterized by the juxtaposition of tonal ambiguity and tonal affirmation, as well as the use of polymetric counterpoint (often 7/8 against 4/4 or 7/8 against 3/4). The middle section, marked “Crystalline,” provides contrast in its use of unmetered sections and independent tempos. The refraction of light is represented in this movement by a 22-note row based on a hexachord (B-flat, F, C, G, A, E) introduced in measure 164 of the first section. The third section, marked “With frenetic energy,” begins without pause on an arresting entrance of the drums playing an additive rhythmic pattern. This pattern (5+7+9+1) amounts to 22 eighth-note pulses and informs much of the motivic and structural considerations for the remainder of the piece.
ContributorsMitton, Stephen LeRoy (Author) / DeMars, James (Thesis advisor) / Norton, Kay (Committee member) / Rogers, Rodney (Committee member) / Arizona State University (Publisher)
Created2017
Description
A major concern in the operation of present-day gas turbine engines is the ingestion of hot mainstream gas into rotor-stator disk cavities of the high-pressure turbine stages. Although the engines require high gas temperature at turbine entry for good performance efficiency, the ingested gas shortens the lives of the cavity internals, particularly that of the rotor disks. Steps such as installing seals at the disk rims and injecting purge (secondary) air bled from the compressor discharge into the cavities are implemented to reduce the gas ingestion. Although there are advantages to the above-mentioned steps, the performance of a gas turbine engine is diminished by the purge air bleed-off. This then requires that the cavity sealing function be achieved with as low a purge air supply rate as possible. This, in turn, renders imperative an in-depth understanding of the pressure and velocity fields in the main gas path and within the disk cavities. In this work, experiments were carried out in a model 1.5-stage (stator-rotor-stator) axial air turbine to study the ingestion of main air into the aft, rotor-stator, disk cavity. The cavity featured rotor and stator rim seals with radial clearance and axial overlap and an inner labyrinth seal. First, time-average static pressure distribution was measured in the main gas path upstream and downstream of the rotor as well as in the cavity to ensure that a nominally steady run condition had been achieved. Main gas ingestion was determined by measuring the concentration distribution of tracer gas (CO2) in the cavity. To map the cavity fluid velocity field, particle image velocimetry was employed. Results are reported for two main air flow rates, two rotor speeds, and four purge air flow rates.
ContributorsJunnarkar, Nihal (Author) / Roy, Ramendra P (Thesis advisor) / Mignolet, Marc (Committee member) / Lee, Taewoo (Committee member) / Arizona State University (Publisher)
Created2010
Description
Arnold Schoenberg’s Pierrot Lunaire, written in 1912 for an ensemble of flute, clarinet, piano, violin, cello, and voice
arrator (with certain instrumental doublings), has, since its premiere, greatly influenced composers writing chamber music. In fact, this particular instrumentation has become known as the “Pierrot Ensemble,” with variations on Schoenberg’s creation used by Igor Stravinsky, Luciano Berio, and many other composers.
There are many resources devoted to music for chamber winds composed during the twentieth century, including those inspired by Schoenberg’s configuration. Additionally, many sources have comprehensively covered known chamber music composed before 1900. However, there is very little research dedicated to chamber wind music composed since 2000.
The purpose of this study is to contribute to the body of research about the music by: 1) creating an annotated bibliography of 21st century wind chamber music.; and 2) thereby catalyzing the discovery of recently composed wind chamber music. Moreover, I hope to address and encourage diversity through my research. To that end, the Composer’s Diversity Database was used as a primary resource for discovering compositions written since 2000 for wind/percussion-based ensembles comprising six to thirteen players.
arrator (with certain instrumental doublings), has, since its premiere, greatly influenced composers writing chamber music. In fact, this particular instrumentation has become known as the “Pierrot Ensemble,” with variations on Schoenberg’s creation used by Igor Stravinsky, Luciano Berio, and many other composers.
There are many resources devoted to music for chamber winds composed during the twentieth century, including those inspired by Schoenberg’s configuration. Additionally, many sources have comprehensively covered known chamber music composed before 1900. However, there is very little research dedicated to chamber wind music composed since 2000.
The purpose of this study is to contribute to the body of research about the music by: 1) creating an annotated bibliography of 21st century wind chamber music.; and 2) thereby catalyzing the discovery of recently composed wind chamber music. Moreover, I hope to address and encourage diversity through my research. To that end, the Composer’s Diversity Database was used as a primary resource for discovering compositions written since 2000 for wind/percussion-based ensembles comprising six to thirteen players.
ContributorsBrown, Jr., Fredrick Marcell (Author) / Hill, Gary W. (Thesis advisor) / Caslor, Jason (Committee member) / Schmelz, Peter (Committee member) / Stover, Christopher (Committee member) / Arizona State University (Publisher)
Created2019
Description
ABSTRACT
The purpose of this study is to analyze Tunes from My Home, a Trio for Violin, Cello, and Piano by Chinese-American composer Chen Yi (b. 1953), as well as to provide a performance guide from a collaborative pianist's perspective. Of Cantonese origin herself, Chen Yi composed several works inspired by Cantonese music, including this trio. Chen Yi composed this trio between 2007 and 2008 and dedicated it to her long time friend pianist Pan Xun, who is also of Cantonese origin. Inspired by this shared Cantonese heritage, Chen Yi incorporated within this work three well-known Cantonese tunes, Cantonese instrumental techniques and sonorities, and elements of the shifan luogu, a wind and percussion ensemble often used in traditional Cantonese music. Coming from the same region as the composer, the author of this paper feels connected with this piece, and as a collaborative pianist, has the opportunity to introduce Cantonese music to a wider audience through the piano trio. Chapter one introduces the motivation for this study. Chapter two provides a brief biography of Chen Yi. Chapter three introduces the history, the scales, and the instruments of Cantonese music as well as other Cantonese influences on this trio, especially the three tunes. Chapter four includes a detailed analysis of each movement in terms of the form and application of the tunes and rhythms of Cantonese music. Chapter five shares the author’s experience of approaching and interpreting this piece in an appropriate style based on her Cantonese roots. The conclusion evaluates the significance of the fusion of Cantonese music with Western compositional techniques in this piece.
The purpose of this study is to analyze Tunes from My Home, a Trio for Violin, Cello, and Piano by Chinese-American composer Chen Yi (b. 1953), as well as to provide a performance guide from a collaborative pianist's perspective. Of Cantonese origin herself, Chen Yi composed several works inspired by Cantonese music, including this trio. Chen Yi composed this trio between 2007 and 2008 and dedicated it to her long time friend pianist Pan Xun, who is also of Cantonese origin. Inspired by this shared Cantonese heritage, Chen Yi incorporated within this work three well-known Cantonese tunes, Cantonese instrumental techniques and sonorities, and elements of the shifan luogu, a wind and percussion ensemble often used in traditional Cantonese music. Coming from the same region as the composer, the author of this paper feels connected with this piece, and as a collaborative pianist, has the opportunity to introduce Cantonese music to a wider audience through the piano trio. Chapter one introduces the motivation for this study. Chapter two provides a brief biography of Chen Yi. Chapter three introduces the history, the scales, and the instruments of Cantonese music as well as other Cantonese influences on this trio, especially the three tunes. Chapter four includes a detailed analysis of each movement in terms of the form and application of the tunes and rhythms of Cantonese music. Chapter five shares the author’s experience of approaching and interpreting this piece in an appropriate style based on her Cantonese roots. The conclusion evaluates the significance of the fusion of Cantonese music with Western compositional techniques in this piece.
ContributorsWu, Xuelai (Author) / Campbell, Andrew (Thesis advisor) / DeMars, James (Committee member) / Landschoot, Thomas (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2017
Description
The subject of this thesis is concerned with the amount of cooling air assigned to seal high pressure turbine rim cavities which is critical for performance as well as component life. Insufficient air leads to excessive hot annulus gas ingestion and its penetration deep into the cavity compromising disc life. Excessive purge air, adversely affects performance. Experiments on a rotating turbine stage rig which included a rotor-stator forward disc cavity were performed at Arizona State University. The turbine rig has 22 vanes and 28 blades, while the rim cavity is composed of a single-tooth rim lab seal and a rim platform overlap seal. Time-averaged static pressures were measured in the gas path and the cavity, while mainstream gas ingestion into the cavity was determined by measuring the concentration distribution of tracer gas (carbon dioxide). Additionally, particle image velocimetry (PIV) was used to measure fluid velocity inside the rim cavity between the lab seal and the overlap. The data from the experiments were compared to an 360-degree unsteady RANS (URANS) CFD simulations. Although not able to match the time-averaged test data satisfactorily, the CFD simulations brought to light the unsteadiness present in the flow during the experiment which the slower response data did not fully capture. To interrogate the validity of URANS simulations in capturing complex rotating flow physics, the scope of this work also included to validating the CFD tool by comparing its predictions against experimental LDV data in a closed rotor-stator cavity. The enclosed cavity has a stationary shroud, a rotating hub, and mass flow does not enter or exit the system. A full 360 degree numerical simulation was performed comparing Fluent LES, with URANS turbulence models. Results from these investigations point to URANS state of art under-predicting closed cavity tangential velocity by 32% to 43%, and open rim cavity effectiveness by 50% compared to test data. The goal of this thesis is to assess the validity of URANS turbulence models in more complex rotating flows, compare accuracy with LES simulations, suggest CFD settings to better simulate turbine stage mainstream/disc cavity interaction with ingestion, and recommend experimentation techniques.
ContributorsKanjiyani, Shezan (Author) / Lee, Taewoo (Thesis advisor) / Mirzamoghadam, Alexander (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2016