Matching Items (5)
Filtering by
- Genre: Doctoral Dissertation
Description
Electromigration in metal interconnects is the most pernicious failure mechanism in semiconductor integrated circuits (ICs). Early electromigration investigations were primarily focused on aluminum interconnects for silicon-based ICs. An alternative metallization compatible with gallium arsenide (GaAs) was required in the development of high-powered radio frequency (RF) compound semiconductor devices operating at higher current densities and elevated temperatures. Gold-based metallization was implemented on GaAs devices because it uniquely forms a very low resistance ohmic contact and gold interconnects have superior electrical and thermal conductivity properties. Gold (Au) was also believed to have improved resistance to electromigration due to its higher melting temperature, yet electromigration reliability data on passivated Au interconnects is scarce and inadequate in the literature. Therefore, the objective of this research was to characterize the electromigration lifetimes of passivated Au interconnects under precisely controlled stress conditions with statistically relevant quantities to obtain accurate model parameters essential for extrapolation to normal operational conditions. This research objective was accomplished through measurement of electromigration lifetimes of large quantities of passivated electroplated Au interconnects utilizing high-resolution in-situ resistance monitoring equipment. Application of moderate accelerated stress conditions with a current density limited to 2 MA/cm2 and oven temperatures in the range of 300°C to 375°C avoided electrical overstress and severe Joule-heated temperature gradients. Temperature coefficients of resistance (TCRs) were measured to determine accurate Joule-heated Au interconnect film temperatures. A failure criterion of 50% resistance degradation was selected to prevent thermal runaway and catastrophic metal ruptures that are problematic of open circuit failure tests. Test structure design was optimized to reduce resistance variation and facilitate failure analysis. Characterization of the Au microstructure yielded a median grain size of 0.91 ìm. All Au lifetime distributions followed log-normal distributions and Black's model was found to be applicable. An activation energy of 0.80 ± 0.05 eV was measured from constant current electromigration tests at multiple temperatures. A current density exponent of 1.91 was extracted from multiple current densities at a constant temperature. Electromigration-induced void morphology along with these model parameters indicated grain boundary diffusion is dominant and the void nucleation mechanism controlled the failure time.
ContributorsKilgore, Stephen (Author) / Adams, James (Thesis advisor) / Schroder, Dieter (Thesis advisor) / Krause, Stephen (Committee member) / Gaw, Craig (Committee member) / Arizona State University (Publisher)
Created2013
Description
Polymer-gold composite particles are of tremendous research interests. Contributed by their unique structures, these particles demonstrate superior properties for optical, catalytic and electrical applications. Moreover, the incorporation of “smart” polymers into polymer-gold composite particles enables the composite particles synergistically respond to environment-stimuli like temperature, pH and light with promising applications in multiple areas.
A novel Pickering emulsion polymerization route is found for synthesis of core-shell structured polymer-gold composite particles. It is found that the surface coverage of gold nanoparticles (AuNP) on a polystyrene core is influenced by gold nanoparticle concentration and hydrophobicity. More importantly, the absorption wavelength of polystyrene-gold composite particles is tunable by adjusting AuNP interparticle distance. Further, core-shell structured polystyrene-gold composite particles demonstrate excellent catalyst recyclability.
Asymmetric polystyrene-gold composite particles are successfully synthesized via seeded emulsion polymerization, where AuNPs serve as seeds, allowing the growth of styrene monomers/oligomers on them. These particles also demonstrate excellent catalyst recyclability. Further, monomers of “smart” polymers, poly (N-isopropylacrylamide) (PNIPAm), are successfully copolymerized into asymmetric composite particles, enabling these particles’ thermo-responsiveness with significant size variation around lower critical solution temperature (LCST) of 31°C. The significant size variation gives rise to switchable scattering intensity property, demonstrating potential applications in intensity-based optical sensing.
Multipetal and dumbbell structured gold-polystyrene composite particles are also successfully synthesized via seeded emulsion polymerization. It is intriguing to observe that by controlling reaction time and AuNP size, tetrapetal-structured, tripetal-structured and dumbbell-structured gold-polystyrene are obtained. Further, “smart” PNIPAm polymers are successfully copolymerized into dumbbell-shaped particles, showing significant size variation around LCST. Self-modulated catalytic activity around LCST is achieved for these particles. It is hypothesized that above LCST, the significant shrinkage of particles limits diffusion of reaction molecules to the surface of AuNPs, giving a reduced catalytic activity.
Finally, carbon black (CB) particles are successfully employed for synthesis of core- shell PNIPAm/polystyrene-CB particles. The thermo-responsive absorption characteristics of PNIPAm/polystyrene-CB particles enable them potentially suitable to serve as “smart” nanofluids with self-controlled temperature. Compared to AuNPs, CB particles provide desirable performance here, because they show no plasmon resonance in visible wavelength range, whereas AuNPs’ absorption in the visible wavelength range is undesirable.
A novel Pickering emulsion polymerization route is found for synthesis of core-shell structured polymer-gold composite particles. It is found that the surface coverage of gold nanoparticles (AuNP) on a polystyrene core is influenced by gold nanoparticle concentration and hydrophobicity. More importantly, the absorption wavelength of polystyrene-gold composite particles is tunable by adjusting AuNP interparticle distance. Further, core-shell structured polystyrene-gold composite particles demonstrate excellent catalyst recyclability.
Asymmetric polystyrene-gold composite particles are successfully synthesized via seeded emulsion polymerization, where AuNPs serve as seeds, allowing the growth of styrene monomers/oligomers on them. These particles also demonstrate excellent catalyst recyclability. Further, monomers of “smart” polymers, poly (N-isopropylacrylamide) (PNIPAm), are successfully copolymerized into asymmetric composite particles, enabling these particles’ thermo-responsiveness with significant size variation around lower critical solution temperature (LCST) of 31°C. The significant size variation gives rise to switchable scattering intensity property, demonstrating potential applications in intensity-based optical sensing.
Multipetal and dumbbell structured gold-polystyrene composite particles are also successfully synthesized via seeded emulsion polymerization. It is intriguing to observe that by controlling reaction time and AuNP size, tetrapetal-structured, tripetal-structured and dumbbell-structured gold-polystyrene are obtained. Further, “smart” PNIPAm polymers are successfully copolymerized into dumbbell-shaped particles, showing significant size variation around LCST. Self-modulated catalytic activity around LCST is achieved for these particles. It is hypothesized that above LCST, the significant shrinkage of particles limits diffusion of reaction molecules to the surface of AuNPs, giving a reduced catalytic activity.
Finally, carbon black (CB) particles are successfully employed for synthesis of core- shell PNIPAm/polystyrene-CB particles. The thermo-responsive absorption characteristics of PNIPAm/polystyrene-CB particles enable them potentially suitable to serve as “smart” nanofluids with self-controlled temperature. Compared to AuNPs, CB particles provide desirable performance here, because they show no plasmon resonance in visible wavelength range, whereas AuNPs’ absorption in the visible wavelength range is undesirable.
ContributorsZhang, Mingmeng (Author) / Dai, Lenore L (Committee member) / Phelan, Patrick E (Committee member) / Otanicar, Todd P (Committee member) / Lin, Jerry (Committee member) / He, Ximin (Committee member) / Arizona State University (Publisher)
Created2015
Description
Hydrothermal environments are important locales for carbon cycling on Earth and elsewhere in the Universe. Below its maximum temperature (~73 °C), microbial photosynthesis drives primary productivity in terrestrial hydrothermal ecosystems, which is thought to be performed by bacterial phototrophs in alkaline systems and eukaryotic algae in acidic systems, yet has received little attention at pH values intermediate to these extremes. Sequencing of 16S and 18S rRNA genes was performed at 12 hot springs with pH values 2.9-5.6 and revealed that cyanobacteria affiliated with the genus Chlorogloeopsis and algae of the order Cyanidiales coexisted at 10 of the sites. Cyanobacteria were present at pH values as low as 2.9, which challenges the paradigm of cyanobacteria being excluded below pH 4. Presence of the carotenoid β-cryptoxanthin in only 2 sites and quantitative PCR data suggest that algae were inactive at many of the sites when sampled. Spatial, but perhaps not temporal, overlap in the habitat ranges of bacterial and eukaryal microbial phototrophs indicates that the notion of a sharp transition between these lineages with respect to pH is untenable.
In sedimentary basins, biosphere-derived organic carbon is subjected to abiotic transformations under hydrothermal conditions. Benzaldehyde was experimentally evaluated as a model to assess the chemistry of aldehydes under these conditions. It was first demonstrated that gold, a traditional vessel material for hydrothermal experiments, caused catalysis of benzaldehyde degradation. Experiments in silica tubes were performed at 250, 300, and 350 °C yielding time-dependent data at several starting concentrations, which confirmed second-order kinetics. Therefore, disproportionation was expected as a major reaction pathway, but unequal yields of benzoic acid and benzyl alcohol were inconsistent with that mechanism. Consideration of other products led to development of a putative reaction scheme and the time dependencies of these products were subjected to kinetic modeling. The model was able to reproduce the observed yields of benzoic acid and benzyl alcohol, indicating that secondary reactions were responsible for the observed ratios of these products. Aldehyde disproportionation could be an unappreciated step in the formation of carboxylic acids, which along with hydrocarbons are the most common organic compounds present in natural systems.
In sedimentary basins, biosphere-derived organic carbon is subjected to abiotic transformations under hydrothermal conditions. Benzaldehyde was experimentally evaluated as a model to assess the chemistry of aldehydes under these conditions. It was first demonstrated that gold, a traditional vessel material for hydrothermal experiments, caused catalysis of benzaldehyde degradation. Experiments in silica tubes were performed at 250, 300, and 350 °C yielding time-dependent data at several starting concentrations, which confirmed second-order kinetics. Therefore, disproportionation was expected as a major reaction pathway, but unequal yields of benzoic acid and benzyl alcohol were inconsistent with that mechanism. Consideration of other products led to development of a putative reaction scheme and the time dependencies of these products were subjected to kinetic modeling. The model was able to reproduce the observed yields of benzoic acid and benzyl alcohol, indicating that secondary reactions were responsible for the observed ratios of these products. Aldehyde disproportionation could be an unappreciated step in the formation of carboxylic acids, which along with hydrocarbons are the most common organic compounds present in natural systems.
ContributorsFecteau, Kristopher Michael, 1986- (Author) / Shock, Everett L (Thesis advisor) / Gould, Ian R (Committee member) / Hartnett, Hilairy E (Committee member) / Arizona State University (Publisher)
Created2016
Description
The bonding and electrostatic properties of gold containing molecules are highly influenced by relativistic effects. To understand this facet on bonding, a series of simple diatomic AuX (X=F, Cl, O and S) molecules, where upon bond formation the Au atom donates or accepts electrons, was investigated and discussed in this thesis.
First, the optical field-free, Stark, and Zeeman spectroscopic studies have been performed on AuF and AuCl. The simple polar bonds between Au and typical halogens (i.e. F and Cl) can be well characterized by the electronic structure studies and the permanent electric dipole moments, el. The spectroscopic parameters have been precisely determined for the [17.7]1, [17.8]0+ and X1+ states of AuF, and the [17.07]1, [17.20]0+ and X1+ states of AuCl. The el have been determined for ground and excited states of AuF and AuCl. The results from the hyperfine analysis and Stark measurement support the assignments that the [17.7]1 and [17.8]0+ states of AuF are the components of a 3 state. Similarly, the analysis demonstrated the [19.07]1 and [19.20]0+ states are the components of the 3 state of AuCl.
Second, my study focused on AuO and AuS because the bonding between gold and sulfur/oxygen is a key component to numerous established and emerging technologies that have applications as far ranging as medical imaging, catalysis, electronics, and material science. The high-resolution spectra were record and analyzed to obtain the geometric and electronic structural data for the ground and excited states. The electric dipole moment, el, and the magnetic dipole moment, m, has been the precisely measured by applying external static electric and magnetic fields. el andm are used to give insight into the unusual complex bonding in these molecules.
In addition to direct studies on the gold-containing molecules, other studies of related molecules are included here as well. These works contain the pure rotation measurement of PtC, the hyperfine and Stark spectroscopic studies of PtF, and the Stark and Zeeman spectroscopic studies of MgH and MgD.
Finally, a perspective discussion and conclusion will summarize the results of AuF, AuCl, AuO, and AuS from this work (bond lengths, dipole moment, etc.). The highly quantitative information derived from this work is the foundation of a chemical description of matter and essential for kinetic energy manipulation via Stark and Zeeman interactions. This data set also establishes a synergism with computation chemists who are developing new methodologies for treating relativistic effects and electron correlation.
First, the optical field-free, Stark, and Zeeman spectroscopic studies have been performed on AuF and AuCl. The simple polar bonds between Au and typical halogens (i.e. F and Cl) can be well characterized by the electronic structure studies and the permanent electric dipole moments, el. The spectroscopic parameters have been precisely determined for the [17.7]1, [17.8]0+ and X1+ states of AuF, and the [17.07]1, [17.20]0+ and X1+ states of AuCl. The el have been determined for ground and excited states of AuF and AuCl. The results from the hyperfine analysis and Stark measurement support the assignments that the [17.7]1 and [17.8]0+ states of AuF are the components of a 3 state. Similarly, the analysis demonstrated the [19.07]1 and [19.20]0+ states are the components of the 3 state of AuCl.
Second, my study focused on AuO and AuS because the bonding between gold and sulfur/oxygen is a key component to numerous established and emerging technologies that have applications as far ranging as medical imaging, catalysis, electronics, and material science. The high-resolution spectra were record and analyzed to obtain the geometric and electronic structural data for the ground and excited states. The electric dipole moment, el, and the magnetic dipole moment, m, has been the precisely measured by applying external static electric and magnetic fields. el andm are used to give insight into the unusual complex bonding in these molecules.
In addition to direct studies on the gold-containing molecules, other studies of related molecules are included here as well. These works contain the pure rotation measurement of PtC, the hyperfine and Stark spectroscopic studies of PtF, and the Stark and Zeeman spectroscopic studies of MgH and MgD.
Finally, a perspective discussion and conclusion will summarize the results of AuF, AuCl, AuO, and AuS from this work (bond lengths, dipole moment, etc.). The highly quantitative information derived from this work is the foundation of a chemical description of matter and essential for kinetic energy manipulation via Stark and Zeeman interactions. This data set also establishes a synergism with computation chemists who are developing new methodologies for treating relativistic effects and electron correlation.
ContributorsZhang, Ruohan (Author) / Steimle, Timothy C. (Thesis advisor) / Williams, Peter (Committee member) / Richert, Ranko (Committee member) / Arizona State University (Publisher)
Created2017
Description自2018年下半年以来，全球主要经济体复苏动力减弱，全球经济下行风险加大，全球贸易环境趋紧，局部金融风险增大，地缘热点地区的博弈依旧激烈。2020年新型冠状病毒疫情全球蔓延，世界经济复苏遭遇阻力。黄金作为一种古老的货币，其不仅拥有商品属性，还兼具有货币属性和金融属性，其避险功能和保值效果能有效分散家庭资产组合的非系统性风险。本文利用23个全球主要黄金市场国家的面板数据，从黄金资产配置收入效应和替代效应、避险动机、金融市场不确定性、文化差异等角度分析家庭黄金商品配置（黄金饰品）和家庭黄金投资品配置（黄金条块）的影响因素。其次针对中国高净值人群资产配置展开问卷调查，主要关注高净值人群风险偏好、金融素养等因素在家庭资产中配置黄金的影响。
本文发现的主要结论是：（1）人均收入水平高的国家，家庭黄金资产配置比例越低，即居民整体收入越高，居民黄金资产配置越低；（2）十年期国债名义年化收益率、国家主要股票指数收益率对家庭黄金资产配置比例不具有显著影响，在通货膨胀率较高的国家，家庭居民会选择消费更多黄金饰品而非购买黄金投资品来提升黄金资产的配置比例；（3）全球金融市场风险较高时，家庭通过购买黄金投资品来配置黄金资产的比例显著提升，即各国居民面对全球金融市场风险时，会选择配置黄金资产来规避风险；（4）受到东亚文化辐射越深入的国家，家庭黄金投资品的配置比例和家庭黄金饰品的配置比例越高；（5）高净值人群风险偏好水平的提升，家庭资产配置黄金的可能性偏高，但是高净值人群黄金配置比例与风险偏好水平无显著相关性；（6）高净值人群金融素养水平的提升，家庭资产配置黄金的可能性偏高，但是高净值人群黄金配置比例与金融素养水平无显著相关性。
ContributorsYang, Hong (Author) / Shen, Wei (Thesis advisor) / Wu, Fei (Thesis advisor) / Hou, Kewei (Committee member) / Arizona State University (Publisher)
Created2021