Matching Items (4)
Filtering by
- All Subjects: Nanostructures
- Creators: Bennett, Peter
- Creators: Schoettle, Louis
Description
A distinct characteristic of ferroelectric materials is the existence of a reversible spontaneous polarization with the application of an electric field. The relevant properties ferroelectric lithium niobate surfaces include a low density of defects and external screening of the bound polarization charge. These properties result in unique surface electric field distribution with a strong electric field in the vicinity of domain boundaries, while away from the boundaries, the field decreases rapidly. In this work, ferroelectric lithium niobate (LN) is used as a template to direct the assembly of metallic nanostructures via photo-induced reduction and a substrate for deposition of ZnO semiconducting thin films via plasma enhanced atomic layer deposition (PE-ALD). To understand the mechanism the photo-induced deposition process the following effects were considered: the illumination photon energy and intensity, the polarization screening mechanism of the lithium niobate template and the chemical concentration. Depending on the UV wavelength, variation of Ag deposition rate and boundary nanowire formation are observed and attributed to the unique surface electric field distribution of the polarity patterned template and the penetration depth of UV light. Oxygen implantation is employed to transition the surface from external screening to internal screening, which results in depressed boundary nanowire formation. The ratio of the photon flux and Ag ion flux to the surface determine the deposition pattern. Domain boundary deposition is enhanced with a high photon/Ag ion flux ratio while domain boundary deposition is depressed with a low photon/Ag ion flux ratio. These results also support the photo-induced deposition model where the process is limited by carrier generation, and the cation reduction occurs at the surface. These findings will provide a foundational understanding to employ ferroelectric templates for assembly and patterning of inorganic, organic, biological, and integrated structures. ZnO films deposited on positive and negative domain surfaces of LN demonstrate different I-V curve behavior at different temperatures. At room temperature, ZnO deposited on positive domains exhibits almost two orders of magnitude greater conductance than on negative domains. The conductance of ZnO on positive domains decreases with increasing temperature while the conductance of ZnO on negative domains increases with increasing temperature. The observations are interpreted in terms of the downward or upward band bending at the ZnO/LN interface which is induced by the ferroelectric polarization charge. Possible application of this effect in non-volatile memory devices is proposed for future work.
ContributorsSun, Yang (Author) / Nemanich, Robert (Thesis advisor) / Bennett, Peter (Committee member) / Sukharev, Maxim (Committee member) / Ros, Robert (Committee member) / McCartney, Martha (Committee member) / Arizona State University (Publisher)
Created2011
Description
This research focuses on the stress and structure evolution observed in-situ during the earliest stages of thin film growth in Cu on Au(111)-reconstruction. For the research, an ultra high vacuum-scanning tunneling microscopy (UHV-STM) system was modified to have the additional capabilities of in-situ deposition and in-situ stress evolution monitoring. The design and fabrication processes for the modifications are explained in detail. The deposition source enabled imaging during the deposition of Cu thin films, while also being columnar enough to avoid negatively impacting the function of the microscope. It was found that the stress-induced changes in piezo voltage occurred over a substantially longer time scale and larger piezo scale than used during imaging, allowing for the deconvolution of the two sources of piezo voltage change. The intrinsic stress evolution observed at the onset of Cu growth was tensile in character and reached a maximum of 0.19 N/m at approximately 0.8ML, with an average tensile slope of 1.0GPa. As the film thickness increased beyond 0.8 ML, the stress became less tensile as the observation of disordered stripe and trigon patterns of misfit dislocations began to appear. The transport of atoms from the surface of enlarged Cu islands into the strained layer played an important role in this stage, because they effectively reduce the activation barrier for the formation of the observed surface structures. A rich array of structures were observed in the work presented here including stripe, disordered stripe and trigon patterns co-existing in a single Cu layer. Heteroepitaxial systems in existing literature showed a uniform structure in the single layer. The non-uniform structures in the single layer of this work may be attributed to the room temperature Cu growth, which can kinetically limit uniform pattern formation. The development of the UHV-STM system with additional capabilities for this work is expected to contribute to research for the stress and structure relationships of many other heteroepitaxial systems.
ContributorsNah, Jungwoo (Author) / Friesen, Cody (Thesis advisor) / Sieradzki, Karl (Committee member) / Bennett, Peter (Committee member) / Arizona State University (Publisher)
Created2012
Description
There are many biological questions that require single-cell analysis of gene sequences, including analysis of clonally distributed dimeric immunoreceptors on lymphocytes (T cells and B cells) and/or the accumulation of driver/accessory mutations in polyclonal tumors. Lysis of bulk cell populations results in mixing of gene sequences, making it impossible to know which pairs of gene sequences originated from any particular cell and obfuscating analysis of rare sequences within large populations. Although current single-cell sorting technologies can be used to address some of these questions, such approaches are expensive, require specialized equipment, and lack the necessary high-throughput capacity for comprehensive analysis. Water-in-oil emulsion approaches for single cell sorting have been developed but droplet-based single-cell lysis and analysis have proven inefficient and yield high rates of false pairings. Ideally, molecular approaches for linking gene sequences from individual cells could be coupled with next-generation high-throughput sequencing to overcome these obstacles, but conventional approaches for linking gene sequences, such as by transfection with bridging oligonucleotides, result in activation of cellular nucleases that destroy the template, precluding this strategy. Recent advances in the synthesis and fabrication of modular deoxyribonucleic acid (DNA) origami nanostructures have resulted in new possibilities for addressing many current and long-standing scientific and technical challenges in biology and medicine. One exciting application of DNA nanotechnology is the intracellular capture, barcode linkage, and subsequent sequence analysis of multiple messenger RNA (mRNA) targets from individual cells within heterogeneous cell populations. DNA nanostructures can be transfected into individual cells to capture and protect mRNA for specific expressed genes, and incorporation of origami-specific bowtie-barcodes into the origami nanostructure facilitates pairing and analysis of mRNA from individual cells by high-throughput next-generation sequencing. This approach is highly modular and can be adapted to virtually any two (and possibly more) gene target sequences, and therefore has a wide range of potential applications for analysis of diverse cell populations such as understanding the relationship between different immune cell populations, development of novel immunotherapeutic antibodies, or improving the diagnosis or treatment for a wide variety of cancers.
ContributorsSchoettle, Louis (Author) / Blattman, Joseph N (Thesis advisor) / Yan, Hao (Committee member) / Chang, Yung (Committee member) / Lindsay, Stuart (Committee member) / Arizona State University (Publisher)
Created2017
Description
Efforts to quantify the diversity of the T cell repertoire have generally been unsuccessful because not all factors accounting for diversity have been considered. In order to get an accurate representation of the T cell repertoire, one must incorporate analysis of germline gene diversity, diversity from somatic recombination, joining diversity from N- and P- nucleotides, and TCR chain pairing diversity. Because of advances in high-throughput sequencing techniques, estimates have been able to account for diversity from TCR genes. However the ability to account for chain pairing diversity has been more difficult. In order to do so, single cell sorting techniques must be employed. These techniques, though effective, are time consuming and expensive. For this reason, no large-scale analyses have been done on the immune repertoires using these techniques. In this study, we propose a novel method for linking the two TCR chain sequences from an individual cell. DNA origami nanostructure technology is employed to capture and bind the TCRγ and TCRδ chain mRNA inside individual cells using probe strands complementary to the C-region of those sequences. We then use a dual-primer RT and ligation molecular strategy to link the two sequences together. The result is a single amplicon containing the CDR3 region of the TCRγ and TCRδ. This amplicon can then be easily PCR amplified using sequence specific primers, and sequenced. DNA origami nanostructures offer a rapid, cost-effective method alternative to conventional single cell sorting techniques, as both TCR mRNA can be captured on one origami molecule inside a single cell. At present, this study outlines a proof-of-principle analysis of the method to determine its functionality. Using known TCRγ and TCRδ sequences, the DNA origami and RT/PCR method was tested and resulting sequence data proved the effectiveness of the method. The original TCRγ and TCRδ sequences were linked together as a single amplicon containing both CDR3 regions of the genes. Thus, this method can be employed in further research to elucidate the γδ T cell repertoire. This technology is also easily adapted to any gene target or cell type and therefore presents a large opportunity to be used in other immune repertoire analysis and other immunological studies (such as the rapid identification and subsequent production of antibodies).
ContributorsPoindexter, Morgan Elizabeth (Author) / Blattman, Joseph (Thesis director) / Yan, Hao (Committee member) / Schoettle, Louis (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2015-05