Filtering by
- Status: Published
During the fracking process, highly pressurized mixture of water and proppants (sand and chemicals) is injected into to a crack, which fractures the surrounding rock structure and proppants help in keeping the fracture open. Over a longer period, however, these fractures tend to close due to the difference between the compressive stress exerted by the reservoir on the fracture and the fluid pressure inside the fracture. During production, fluid pressure inside the fracture is reduced further which can accelerate the closure of a fracture.
In this thesis, we study the stress distribution around a hydraulic fracture caused by fluid production. It is shown that fluid flow can induce a very high hoop stress near the fracture tip. As the pressure gradient increases stress concentration increases. If a fracture is very thin, the flow induced stress along the fracture decreases, but the stress concentration at the fracture tip increases and become unbounded for an infinitely thin fracture.
The result from the present study can be used for studying the fracture closure problem, and ultimately this in turn can lead to the development of better proppants so that prolific well production can be sustained for a long period of time.
Crumb rubber use in asphalt mixtures by means of wet process technology has been in place for several years in the United States with good performance record; however, it has some shortcomings such as maintaining high mixing and compaction temperatures in the field production. Organosilane (OS), a nanotechnology chemical substantially improves the bonding between aggregate and asphalt by modifying the aggregate structure from hydrophilic to hydrophobic contributing to increased moisture resistance of conventional asphalt mixtures. Use of Organosilane also reduces the mixing and compaction temperatures and facilitates similar compaction effort at lower temperatures. The objective of this research study was first to perform a Superpave mix design for Crumb Rubber Modified Binder (CRMB) gap-graded mixture with and without Organosilane; and secondly, analyse the performance of CRMB mixtures with and without Organosilane by conducting various laboratory tests. Performance Grade (PG) 64-22 binder was used to create the gap-graded Hot Mix Asphalt (HMA) mixtures for this study. Laboratory tests included rotational viscometer binder test and mixtures tests: dynamic modulus, flow number, tensile strength ratio, and C* fracture test. Results from the tests indicated that the addition of Organosilane facilitated easier compaction efforts despite reduced mixing and compaction temperatures. Organosilane also modestly increased the moisture susceptibility and resistance to crack propagation yet retaining equal rutting resistance of the CRMB mixtures.
quickly follows the initial transient flow regime in the constant-rate production of
a closed boundary hydrocarbon reservoir. The characterization of the PSS flow
regime is of importance in describing the reservoir pressure distribution as well as the
productivity index (PI) of the flow regime. The PI describes the production potential
of the well and is often used in fracture optimization and production-rate decline
analysis. In 2016, Chen determined the exact analytical solution for PSS flow of a
fully penetrated vertically fractured well with finite fracture conductivity for reservoirs
of elliptical shape. The present work aimed to expand Chen’s exact analytical solution
to commonly encountered reservoirs geometries including rectangular, rhomboid,
and triangular by introducing respective shape factors generated from extensive
computational modeling studies based on an identical drainage area assumption. The
aforementioned shape factors were generated and characterized as functions for use
in spreadsheet calculations as well as graphical format for simplistic in-field look-up
use. Demonstrative use of the shape factors for over 20 additional simulations showed
high fidelity of the shape factor to accurately predict (mean average percentage error
remained under 1.5 %) the true PSS constant by modulating Chen’s solution for
elliptical reservoirs. The methodology of the shape factor generation lays the ground
work for more extensive and specific shape factors to be generated for cases such as
non-concentric wells and other geometries not studied.