Matching Items (5)
Filtering by
- All Subjects: Applied Mathematics
- Member of: ASU Electronic Theses and Dissertations
A level set approach for denoising and adaptively smoothing complex geometry stereolithography files
Description
Stereolithography files (STL) are widely used in diverse fields as a means of describing complex geometries through surface triangulations. The resulting stereolithography output is a result of either experimental measurements, or computer-aided design. Often times stereolithography outputs from experimental means are prone to noise, surface irregularities and holes in an otherwise closed surface.
A general method for denoising and adaptively smoothing these dirty stereolithography files is proposed. Unlike existing means, this approach aims to smoothen the dirty surface representation by utilizing the well established levelset method. The level of smoothing and denoising can be set depending on a per-requirement basis by means of input parameters. Once the surface representation is smoothened as desired, it can be extracted as a standard levelset scalar isosurface.
The approach presented in this thesis is also coupled to a fully unstructured Cartesian mesh generation library with built-in localized adaptive mesh refinement (AMR) capabilities, thereby ensuring lower computational cost while also providing sufficient resolution. Future work will focus on implementing tetrahedral cuts to the base hexahedral mesh structure in order to extract a fully unstructured hexahedra-dominant mesh describing the STL geometry, which can be used for fluid flow simulations.
A general method for denoising and adaptively smoothing these dirty stereolithography files is proposed. Unlike existing means, this approach aims to smoothen the dirty surface representation by utilizing the well established levelset method. The level of smoothing and denoising can be set depending on a per-requirement basis by means of input parameters. Once the surface representation is smoothened as desired, it can be extracted as a standard levelset scalar isosurface.
The approach presented in this thesis is also coupled to a fully unstructured Cartesian mesh generation library with built-in localized adaptive mesh refinement (AMR) capabilities, thereby ensuring lower computational cost while also providing sufficient resolution. Future work will focus on implementing tetrahedral cuts to the base hexahedral mesh structure in order to extract a fully unstructured hexahedra-dominant mesh describing the STL geometry, which can be used for fluid flow simulations.
ContributorsKannan, Karthik (Author) / Herrmann, Marcus (Thesis advisor) / Peet, Yulia (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2014
Description
A new method of adaptive mesh generation for the computation of fluid flows is investigated. The method utilizes gradients of the flow solution to adapt the size and stretching of elements or volumes in the computational mesh as is commonly done in the conventional Hessian approach. However, in the new method, higher-order gradients are used in place of the Hessian. The method is applied to the finite element solution of the incompressible Navier-Stokes equations on model problems. Results indicate that a significant efficiency benefit is realized.
ContributorsShortridge, Randall (Author) / Chen, Kang Ping (Thesis advisor) / Herrmann, Marcus (Thesis advisor) / Wells, Valana (Committee member) / Huang, Huei-Ping (Committee member) / Mittelmann, Hans (Committee member) / Arizona State University (Publisher)
Created2011
Description
Autonomic closure is a new general methodology for subgrid closures in large eddy simulations that circumvents the need to specify fixed closure models and instead allows a fully- adaptive self-optimizing closure. The closure is autonomic in the sense that the simulation itself determines the optimal relation at each point and time between any subgrid term and the variables in the simulation, through the solution of a local system identification problem. It is based on highly generalized representations of subgrid terms having degrees of freedom that are determined dynamically at each point and time in the simulation. This can be regarded as a very high-dimensional generalization of the dynamic approach used with some traditional prescribed closure models, or as a type of “data-driven” turbulence closure in which machine- learning methods are used with internal training data obtained at a test-filter scale at each point and time in the simulation to discover the local closure representation.
In this study, a priori tests were performed to develop accurate and efficient implementations of autonomic closure based on particular generalized representations and parameters associated with the local system identification of the turbulence state. These included the relative number of training points and bounding box size, which impact computational cost and generalizability of coefficients in the representation from the test scale to the LES scale. The focus was on studying impacts of these factors on the resulting accuracy and efficiency of autonomic closure for the subgrid stress. Particular attention was paid to the associated subgrid production field, including its structural features in which large forward and backward energy transfer are concentrated.
More than five orders of magnitude reduction in computational cost of autonomic closure was achieved in this study with essentially no loss of accuracy, primarily by using efficient frame-invariant forms for generalized representations that greatly reduce the number of degrees of freedom. The recommended form is a 28-coefficient representation that provides subgrid stress and production fields that are far more accurate in terms of structure and statistics than are traditional prescribed closure models.
In this study, a priori tests were performed to develop accurate and efficient implementations of autonomic closure based on particular generalized representations and parameters associated with the local system identification of the turbulence state. These included the relative number of training points and bounding box size, which impact computational cost and generalizability of coefficients in the representation from the test scale to the LES scale. The focus was on studying impacts of these factors on the resulting accuracy and efficiency of autonomic closure for the subgrid stress. Particular attention was paid to the associated subgrid production field, including its structural features in which large forward and backward energy transfer are concentrated.
More than five orders of magnitude reduction in computational cost of autonomic closure was achieved in this study with essentially no loss of accuracy, primarily by using efficient frame-invariant forms for generalized representations that greatly reduce the number of degrees of freedom. The recommended form is a 28-coefficient representation that provides subgrid stress and production fields that are far more accurate in terms of structure and statistics than are traditional prescribed closure models.
ContributorsKshitij, Abhinav (Author) / Dahm, Werner J.A. (Thesis advisor) / Herrmann, Marcus (Committee member) / Hamlington, Peter E (Committee member) / Peet, Yulia (Committee member) / Kim, Jeonglae (Committee member) / Arizona State University (Publisher)
Created2019
Description
The dynamics of a fluid flow inside 2D square and 3D cubic cavities
under various configurations were simulated and analyzed using a
spectral code I developed.
This code was validated against known studies in the 3D lid-driven
cavity. It was then used to explore the various dynamical behaviors
close to the onset of instability of the steady-state flow, and explain
in the process the mechanism underlying an intermittent bursting
previously observed. A fairly complete bifurcation picture emerged,
using a combination of computational tools such as selective
frequency damping, edge-state tracking and subspace restriction.
The code was then used to investigate the flow in a 2D square cavity
under stable temperature stratification, an idealized version of a lake
with warmer water at the surface compared to the bottom. The governing
equations are the Navier-Stokes equations under the Boussinesq approximation.
Simulations were done over a wide range of parameters of the problem quantifying
the driving velocity at the top (e.g. wind) and the strength of the stratification.
Particular attention was paid to the mechanisms associated with the onset of
instability of the base steady state, and the complex nontrivial dynamics
occurring beyond onset, where the presence of multiple states leads to a
rich spectrum of states, including homoclinic and heteroclinic chaos.
A third configuration investigates the flow dynamics of a fluid in a rapidly
rotating cube subjected to small amplitude modulations. The responses were
quantified by the global helicity and energy measures, and various peak
responses associated to resonances with intrinsic eigenmodes of the cavity
and/or internal retracing beams were clearly identified for the first time.
A novel approach to compute the eigenmodes is also described, making accessible
a whole catalog of these with various properties and dynamics. When the small
amplitude modulation does not align with the rotation axis (precession) we show
that a new set of eigenmodes are primarily excited as the angular velocity
increases, while triadic resonances may occur once the nonlinear regime kicks in.
under various configurations were simulated and analyzed using a
spectral code I developed.
This code was validated against known studies in the 3D lid-driven
cavity. It was then used to explore the various dynamical behaviors
close to the onset of instability of the steady-state flow, and explain
in the process the mechanism underlying an intermittent bursting
previously observed. A fairly complete bifurcation picture emerged,
using a combination of computational tools such as selective
frequency damping, edge-state tracking and subspace restriction.
The code was then used to investigate the flow in a 2D square cavity
under stable temperature stratification, an idealized version of a lake
with warmer water at the surface compared to the bottom. The governing
equations are the Navier-Stokes equations under the Boussinesq approximation.
Simulations were done over a wide range of parameters of the problem quantifying
the driving velocity at the top (e.g. wind) and the strength of the stratification.
Particular attention was paid to the mechanisms associated with the onset of
instability of the base steady state, and the complex nontrivial dynamics
occurring beyond onset, where the presence of multiple states leads to a
rich spectrum of states, including homoclinic and heteroclinic chaos.
A third configuration investigates the flow dynamics of a fluid in a rapidly
rotating cube subjected to small amplitude modulations. The responses were
quantified by the global helicity and energy measures, and various peak
responses associated to resonances with intrinsic eigenmodes of the cavity
and/or internal retracing beams were clearly identified for the first time.
A novel approach to compute the eigenmodes is also described, making accessible
a whole catalog of these with various properties and dynamics. When the small
amplitude modulation does not align with the rotation axis (precession) we show
that a new set of eigenmodes are primarily excited as the angular velocity
increases, while triadic resonances may occur once the nonlinear regime kicks in.
ContributorsWu, Ke (Author) / Lopez, Juan (Thesis advisor) / Welfert, Bruno (Thesis advisor) / Tang, Wenbo (Committee member) / Platte, Rodrigo (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2019
Description
The three-dimensional flow contained in a rapidly rotating circular
split cylinder is studied numerically solving the Navier--Stokes
equations. The cylinder is completely filled with fluid
and is split at the midplane. Three different types of boundary
conditions were imposed, leading to a variety of instabilities and
complex flow dynamics.
The first configuration has a strong background rotation and a small
differential rotation between the two halves. The axisymmetric flow
was first studied identifying boundary layer instabilities which
produce inertial waves under some conditions. Limit cycle states and
quasiperiodic states were found, including some period doubling
bifurcations. Then, a three-dimensional study was conducted
identifying low and high azimuthal wavenumber rotating waves due to
G’ortler and Tollmien–-Schlichting type instabilities. Over most of
the parameter space considered, quasiperiodic states were found where
both types of instabilities were present.
In the second configuration, both cylinder halves are in exact
counter-rotation, producing an O(2) symmetry in the system. The basic state flow dynamic
is dominated by the shear layer created
in the midplane. By changing the speed rotation and the aspect ratio
of the cylinder, the flow loses symmetries in a variety of ways
creating static waves, rotating waves, direction reversing waves and
slow-fast pulsing waves. The bifurcations, including infinite-period
bifurcations, were characterized and the flow dynamics was elucidated.
Additionally, preliminary experimental results for this case are
presented.
In the third set up, with oscillatory boundary conditions, inertial
wave beams were forced imposing a range of frequencies. These beams
emanate from the corner of the cylinder and from the split at the
midplane, leading to destructive/constructive interactions which
produce peaks in vorticity for some specific frequencies. These
frequencies are shown to be associated with the resonant Kelvin
modes. Furthermore, a study of the influence of imposing a phase
difference between the oscillations of the two halves of the cylinder
led to the interesting result that different Kelvin
modes can be excited depending on the phase difference.
split cylinder is studied numerically solving the Navier--Stokes
equations. The cylinder is completely filled with fluid
and is split at the midplane. Three different types of boundary
conditions were imposed, leading to a variety of instabilities and
complex flow dynamics.
The first configuration has a strong background rotation and a small
differential rotation between the two halves. The axisymmetric flow
was first studied identifying boundary layer instabilities which
produce inertial waves under some conditions. Limit cycle states and
quasiperiodic states were found, including some period doubling
bifurcations. Then, a three-dimensional study was conducted
identifying low and high azimuthal wavenumber rotating waves due to
G’ortler and Tollmien–-Schlichting type instabilities. Over most of
the parameter space considered, quasiperiodic states were found where
both types of instabilities were present.
In the second configuration, both cylinder halves are in exact
counter-rotation, producing an O(2) symmetry in the system. The basic state flow dynamic
is dominated by the shear layer created
in the midplane. By changing the speed rotation and the aspect ratio
of the cylinder, the flow loses symmetries in a variety of ways
creating static waves, rotating waves, direction reversing waves and
slow-fast pulsing waves. The bifurcations, including infinite-period
bifurcations, were characterized and the flow dynamics was elucidated.
Additionally, preliminary experimental results for this case are
presented.
In the third set up, with oscillatory boundary conditions, inertial
wave beams were forced imposing a range of frequencies. These beams
emanate from the corner of the cylinder and from the split at the
midplane, leading to destructive/constructive interactions which
produce peaks in vorticity for some specific frequencies. These
frequencies are shown to be associated with the resonant Kelvin
modes. Furthermore, a study of the influence of imposing a phase
difference between the oscillations of the two halves of the cylinder
led to the interesting result that different Kelvin
modes can be excited depending on the phase difference.
ContributorsGutierrez Castillo, Paloma (Author) / Lopez, Juan M. (Thesis advisor) / Herrmann, Marcus (Committee member) / Platte, Rodrigo (Committee member) / Welfert, Bruno (Committee member) / Tang, Wenbo (Committee member) / Arizona State University (Publisher)
Created2017