Matching Items (5)
Filtering by
- All Subjects: Experimental Design
- Creators: Pan, Rong
Description
Nowadays product reliability becomes the top concern of the manufacturers and customers always prefer the products with good performances under long period. In order to estimate the lifetime of the product, accelerated life testing (ALT) is introduced because most of the products can last years even decades. Much research has been done in the ALT area and optimal design for ALT is a major topic. This dissertation consists of three main studies. First, a methodology of finding optimal design for ALT with right censoring and interval censoring have been developed and it employs the proportional hazard (PH) model and generalized linear model (GLM) to simplify the computational process. A sensitivity study is also given to show the effects brought by parameters to the designs. Second, an extended version of I-optimal design for ALT is discussed and then a dual-objective design criterion is defined and showed with several examples. Also in order to evaluate different candidate designs, several graphical tools are developed. Finally, when there are more than one models available, different model checking designs are discussed.
ContributorsYang, Tao (Author) / Pan, Rong (Thesis advisor) / Montgomery, Douglas C. (Committee member) / Borror, Connie (Committee member) / Rigdon, Steve (Committee member) / Arizona State University (Publisher)
Created2013
Description
No-confounding designs (NC) in 16 runs for 6, 7, and 8 factors are non-regular fractional factorial designs that have been suggested as attractive alternatives to the regular minimum aberration resolution IV designs because they do not completely confound any two-factor interactions with each other. These designs allow for potential estimation of main effects and a few two-factor interactions without the need for follow-up experimentation. Analysis methods for non-regular designs is an area of ongoing research, because standard variable selection techniques such as stepwise regression may not always be the best approach. The current work investigates the use of the Dantzig selector for analyzing no-confounding designs. Through a series of examples it shows that this technique is very effective for identifying the set of active factors in no-confounding designs when there are three of four active main effects and up to two active two-factor interactions.
To evaluate the performance of Dantzig selector, a simulation study was conducted and the results based on the percentage of type II errors are analyzed. Also, another alternative for 6 factor NC design, called the Alternate No-confounding design in six factors is introduced in this study. The performance of this Alternate NC design in 6 factors is then evaluated by using Dantzig selector as an analysis method. Lastly, a section is dedicated to comparing the performance of NC-6 and Alternate NC-6 designs.
To evaluate the performance of Dantzig selector, a simulation study was conducted and the results based on the percentage of type II errors are analyzed. Also, another alternative for 6 factor NC design, called the Alternate No-confounding design in six factors is introduced in this study. The performance of this Alternate NC design in 6 factors is then evaluated by using Dantzig selector as an analysis method. Lastly, a section is dedicated to comparing the performance of NC-6 and Alternate NC-6 designs.
ContributorsKrishnamoorthy, Archana (Author) / Montgomery, Douglas C. (Thesis advisor) / Borror, Connie (Thesis advisor) / Pan, Rong (Committee member) / Arizona State University (Publisher)
Created2014
Description
Optimal experimental design for generalized linear models is often done using a pseudo-Bayesian approach that integrates the design criterion across a prior distribution on the parameter values. This approach ignores the lack of utility of certain models contained in the prior, and a case is demonstrated where the heavy focus on such hopeless models results in a design with poor performance and with wild swings in coverage probabilities for Wald-type confidence intervals. Design construction using a utility-based approach is shown to result in much more stable coverage probabilities in the area of greatest concern.
The pseudo-Bayesian approach can be applied to the problem of optimal design construction under dependent observations. Often, correlation between observations exists due to restrictions on randomization. Several techniques for optimal design construction are proposed in the case of the conditional response distribution being a natural exponential family member but with a normally distributed block effect . The reviewed pseudo-Bayesian approach is compared to an approach based on substituting the marginal likelihood with the joint likelihood and an approach based on projections of the score function (often called quasi-likelihood). These approaches are compared for several models with normal, Poisson, and binomial conditional response distributions via the true determinant of the expected Fisher information matrix where the dispersion of the random blocks is considered a nuisance parameter. A case study using the developed methods is performed.
The joint and quasi-likelihood methods are then extended to address the case when the magnitude of random block dispersion is of concern. Again, a simulation study over several models is performed, followed by a case study when the conditional response distribution is a Poisson distribution.
The pseudo-Bayesian approach can be applied to the problem of optimal design construction under dependent observations. Often, correlation between observations exists due to restrictions on randomization. Several techniques for optimal design construction are proposed in the case of the conditional response distribution being a natural exponential family member but with a normally distributed block effect . The reviewed pseudo-Bayesian approach is compared to an approach based on substituting the marginal likelihood with the joint likelihood and an approach based on projections of the score function (often called quasi-likelihood). These approaches are compared for several models with normal, Poisson, and binomial conditional response distributions via the true determinant of the expected Fisher information matrix where the dispersion of the random blocks is considered a nuisance parameter. A case study using the developed methods is performed.
The joint and quasi-likelihood methods are then extended to address the case when the magnitude of random block dispersion is of concern. Again, a simulation study over several models is performed, followed by a case study when the conditional response distribution is a Poisson distribution.
ContributorsHassler, Edgar (Author) / Montgomery, Douglas C. (Thesis advisor) / Silvestrini, Rachel T. (Thesis advisor) / Borror, Connie M. (Committee member) / Pan, Rong (Committee member) / Arizona State University (Publisher)
Created2015
Description
Functional or dynamic responses are prevalent in experiments in the fields of engineering, medicine, and the sciences, but proposals for optimal designs are still sparse for this type of response. Experiments with dynamic responses result in multiple responses taken over a spectrum variable, so the design matrix for a dynamic response have more complicated structures. In the literature, the optimal design problem for some functional responses has been solved using genetic algorithm (GA) and approximate design methods. The goal of this dissertation is to develop fast computer algorithms for calculating exact D-optimal designs.
First, we demonstrated how the traditional exchange methods could be improved to generate a computationally efficient algorithm for finding G-optimal designs. The proposed two-stage algorithm, which is called the cCEA, uses a clustering-based approach to restrict the set of possible candidates for PEA, and then improves the G-efficiency using CEA.
The second major contribution of this dissertation is the development of fast algorithms for constructing D-optimal designs that determine the optimal sequence of stimuli in fMRI studies. The update formula for the determinant of the information matrix was improved by exploiting the sparseness of the information matrix, leading to faster computation times. The proposed algorithm outperforms genetic algorithm with respect to computational efficiency and D-efficiency.
The third contribution is a study of optimal experimental designs for more general functional response models. First, the B-spline system is proposed to be used as the non-parametric smoother of response function and an algorithm is developed to determine D-optimal sampling points of a spectrum variable. Second, we proposed a two-step algorithm for finding the optimal design for both sampling points and experimental settings. In the first step, the matrix of experimental settings is held fixed while the algorithm optimizes the determinant of the information matrix for a mixed effects model to find the optimal sampling times. In the second step, the optimal sampling times obtained from the first step is held fixed while the algorithm iterates on the information matrix to find the optimal experimental settings. The designs constructed by this approach yield superior performance over other designs found in literature.
First, we demonstrated how the traditional exchange methods could be improved to generate a computationally efficient algorithm for finding G-optimal designs. The proposed two-stage algorithm, which is called the cCEA, uses a clustering-based approach to restrict the set of possible candidates for PEA, and then improves the G-efficiency using CEA.
The second major contribution of this dissertation is the development of fast algorithms for constructing D-optimal designs that determine the optimal sequence of stimuli in fMRI studies. The update formula for the determinant of the information matrix was improved by exploiting the sparseness of the information matrix, leading to faster computation times. The proposed algorithm outperforms genetic algorithm with respect to computational efficiency and D-efficiency.
The third contribution is a study of optimal experimental designs for more general functional response models. First, the B-spline system is proposed to be used as the non-parametric smoother of response function and an algorithm is developed to determine D-optimal sampling points of a spectrum variable. Second, we proposed a two-step algorithm for finding the optimal design for both sampling points and experimental settings. In the first step, the matrix of experimental settings is held fixed while the algorithm optimizes the determinant of the information matrix for a mixed effects model to find the optimal sampling times. In the second step, the optimal sampling times obtained from the first step is held fixed while the algorithm iterates on the information matrix to find the optimal experimental settings. The designs constructed by this approach yield superior performance over other designs found in literature.
ContributorsSaleh, Moein (Author) / Pan, Rong (Thesis advisor) / Montgomery, Douglas C. (Committee member) / Runger, George C. (Committee member) / Kao, Ming-Hung (Committee member) / Arizona State University (Publisher)
Created2015
Description
Mixture experiments are useful when the interest is in determining how changes in the proportion of an experimental component affects the response. This research focuses on the modeling and design of mixture experiments when the response is categorical namely, binary and ordinal. Data from mixture experiments is characterized by the perfect collinearity of the experimental components, resulting in model matrices that are singular and inestimable under likelihood estimation procedures. To alleviate problems with estimation, this research proposes the reparameterization of two nonlinear models for ordinal data -- the proportional-odds model with a logistic link and the stereotype model. A study involving subjective ordinal responses from a mixture experiment demonstrates that the stereotype model reveals useful information about the relationship between mixture components and the ordinality of the response, which the proportional-odds fails to detect.
The second half of this research deals with the construction of exact D-optimal designs for binary and ordinal responses. For both types, the base models fall under the class of Generalized Linear Models (GLMs) with a logistic link. First, the properties of the exact D-optimal mixture designs for binary responses are investigated. It will be shown that standard mixture designs and designs proposed for normal-theory responses are poor surrogates for the true D-optimal designs. In contrast with the D-optimal designs for normal-theory responses which locate support points at the boundaries of the mixture region, exact D-optimal designs for GLMs tend to locate support points at regions of uncertainties. Alternate D-optimal designs for binary responses with high D-efficiencies are proposed by utilizing information about these regions.
The Mixture Exchange Algorithm (MEA), a search heuristic tailored to the construction of efficient mixture designs with GLM-type responses, is proposed. MEA introduces a new and efficient updating formula that lessens the computational expense of calculating the D-criterion for multi-categorical response systems, such as ordinal response models. MEA computationally outperforms comparable search heuristics by several orders of magnitude. Further, its computational expense increases at a slower rate of growth with increasing problem size. Finally, local and robust D-optimal designs for ordinal-response mixture systems are constructed using MEA, investigated, and shown to have high D-efficiency performance.
The second half of this research deals with the construction of exact D-optimal designs for binary and ordinal responses. For both types, the base models fall under the class of Generalized Linear Models (GLMs) with a logistic link. First, the properties of the exact D-optimal mixture designs for binary responses are investigated. It will be shown that standard mixture designs and designs proposed for normal-theory responses are poor surrogates for the true D-optimal designs. In contrast with the D-optimal designs for normal-theory responses which locate support points at the boundaries of the mixture region, exact D-optimal designs for GLMs tend to locate support points at regions of uncertainties. Alternate D-optimal designs for binary responses with high D-efficiencies are proposed by utilizing information about these regions.
The Mixture Exchange Algorithm (MEA), a search heuristic tailored to the construction of efficient mixture designs with GLM-type responses, is proposed. MEA introduces a new and efficient updating formula that lessens the computational expense of calculating the D-criterion for multi-categorical response systems, such as ordinal response models. MEA computationally outperforms comparable search heuristics by several orders of magnitude. Further, its computational expense increases at a slower rate of growth with increasing problem size. Finally, local and robust D-optimal designs for ordinal-response mixture systems are constructed using MEA, investigated, and shown to have high D-efficiency performance.
ContributorsMancenido, Michelle V (Author) / Montgomery, Douglas C. (Thesis advisor) / Pan, Rong (Thesis advisor) / Borror, Connie M. (Committee member) / Shunk, Dan L. (Committee member) / Arizona State University (Publisher)
Created2016