Matching Items (666)
Filtering by
- All Subjects: Songs (High voice) with piano
ContributorsWasbotten, Leia (Performer) / ASU Library. Music Library (Publisher)
Created2018-03-30
Description
Libby Larsen is one of the most performed and acclaimed composers today. She is a spirited, compelling, and sensitive composer whose music enhances the poetry of America's most prominent authors. Notable among her works are song cycles for soprano based on the poetry of female writers, among them novelist and poet Willa Cather (1873-1947). Larsen has produced two song cycles on works from Cather's substantial output of fiction: one based on Cather's short story, "Eric Hermannson's Soul," titled Margaret Songs: Three Songs from Willa Cather (1996); and later, My Antonia (2000), based on Cather's novel of the same title. In Margaret Songs, Cather's poetry and short stories--specifically the character of Margaret Elliot--combine with Larsen's unique compositional style to create a surprising collaboration. This study explores how Larsen in these songs delves into the emotional and psychological depths of Margaret's character, not fully formed by Cather. It is only through Larsen's music and Cather's poetry that Margaret's journey through self-discovery and love become fully realized. This song cycle is a glimpse through the eyes of two prominent female artists on the societal pressures placed upon Margaret's character, many of which still resonate with women in today's culture. This study examines the work Margaret Songs by discussing Willa Cather, her musical influences, and the conditions surrounding the writing of "Eric Hermannson's Soul." It looks also into Cather's influence on Libby Larsen and the commission leading to Margaret Songs. Finally, a description of the musical, dramatic, and textual content of the songs completes this interpretation of the interactions of Willa Cather, Libby Larsen, and the character of Margaret Elliot.
ContributorsMcLain, Christi Marie (Author) / FitzPatrick, Carole (Thesis advisor) / Dreyfoos, Dale (Committee member) / Holbrook, Amy (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2013
Discovering Puerto Rican art song: a research project on four art song works by Héctor Campos Parsi
Description
Puerto Rico has produced many important composers who have contributed to the musical culture of the nation during the last 200 years. However, a considerable amount of their music has proven to be difficult to access and may contain numerous errors. This research project intends to contribute to the accessibility of such music and to encourage similar studies of Puerto Rican music. This study focuses on the music of Héctor Campos Parsi (1922-1998), one of the most prominent composers of the 20th century in Puerto Rico. After an overview of the historical background of music on the island and the biography of the composer, four works from his art song repertoire are given for detailed examination. A product of this study is the first corrected edition of his cycles Canciones de Cielo y Agua, Tres Poemas de Corretjer, Los Paréntesis, and the song Majestad Negra. These compositions date from 1947 to 1959, and reflect both the European and nationalistic writing styles of the composer during this time. Data for these corrections have been obtained from the composer's manuscripts, published and unpublished editions, and published recordings. The corrected scores are ready for publication and a compact disc of this repertoire, performed by soprano Melliangee Pérez and the author, has been recorded to bring to life these revisions. Despite the best intentions of the author, the various copyright issues have yet to be resolved. It is hoped that this document will provide the foundation for a resolution and that these important works will be available for public performance and study in the near future.
ContributorsRodríguez Morales, Luis F., 1980- (Author) / Campbell, Andrew (Thesis advisor) / Buck, Elizabeth (Committee member) / Holbrook, Amy (Committee member) / Kopta, Anne (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2013
ContributorsYi, Joyce (Performer) / ASU Library. Music Library (Publisher)
Created2018-03-22
ContributorsCummiskey, Hannah (Performer) / Kim, Olga (Performer) / ASU Library. Music Library (Publisher)
Created2018-03-23
ContributorsEvans, Emily (Performer) / Sherrill, Amanda (Performer) / ASU Library. Music Library (Publisher)
Created2018-03-02
Description
This paper emphasizes how vital prosthetic devices are as tools for both congenital and acquired amputees in order to maximize this population's level of societal productivity, but several issues exist with the current technological focus of development by the prosthetic industry that creates unnecessary hurdles that amputees must surpass in order to truly benefit from these tools. The first major issue is that these devices are not readily available to all amputees. The astronomical cost of most prosthetic devices is a variable that restricts low income amputee populations from obtaining these vital tools regardless of their level of need, thus highlighting the fact that amputees who are not financially stable are not supported in a fashion that is conducive to their success. Also, cost greatly affects children who suffer from a missing appendage due to the fact that they are in constant need of prosthetic replacement because of physical growth and development. Another issue with the current focus of the prosthetic industry is that it focuses on acquired amputees because this population is much larger in comparison to congenital amputees and thus more lucrative. Congenital amputees' particular needs are often entirely ignored in terms of prosthetic innovation. Finally, low daily utilization is a major issue amongst the amputee population. Several variables exist with the use of prosthetic devices that cause many amputees to decide against the utilization of these tools, like difficulty of use and lack of comfort. This paper will provide solutions to cost, discrimination, issues in development, and daily utilization by emphasizing on how lowering the cost through alternative designs and materials, transitioning the focus of technological development onto the entire amputee population rather than targeting the most lucrative group, and advancing the design in a fashion to which promotes daily utilization will provide the largest level of societal support, so that the amputee population as a whole can maximize their level of productivity in a manner that will allow this group to conquer the hardships that are introduced into their lives due to a missing appendage.
ContributorsO'Connor, Casey Charles (Author) / Popova, Laura (Thesis director) / Graff, Sarah (Committee member) / Department of Psychology (Contributor) / School of Social Work (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The El Niño Southern Oscillation (ENSO) consists of a linkage between changes in sea-surface temperatures and atmospheric pressure across the Tropical Pacific. ENSO encompasses three phases: neutral events, warm/El Niño events in which sea-surface temperatures are warmer-than-normal and the pressure gradient decreases across the Equatorial Pacific, and cold/La Niña events in which Tropical Pacific sea-surface temperatures are cooler-than-normal and the pressure gradient increases. Previous studies have determined a connection between variations in ENSO phase and weather patterns across the globe, focusing particularly on surface temperature and precipitation patterns in the United States. However, little research exists that attempts to link changes in ENSO phase with severe weather in Arizona. Therefore, in this study, I analyzed how variations in ENSO phase affect the frequency, intensity, and spatial distribution of four types of severe weather from 1959 to 2016 in Arizona, including a) tornado events, b) severe thunderstorm wind events, c) hail events, and d) heavy rain and flash flood events. I collected data on the Oceanic Niño Index (ONI), a measure of ENSO, as well as storm reports for each severe weather phenomenon dating back to 1959. Then, I analyzed the frequency of each Arizona severe weather event type within each of the twelve annual months and over the entire study period. I also analyzed mean intensity values (Fujita/Enhanced Fujita Scale rating, path width, and path length for tornadoes; hail diameter in millimeters for hail; and wind gust speed for severe thunderstorm wind events) for each severe weather phenomenon, excluding the heavy rain and flash flood events. Finally, I used the Mean Center and Directional Distribution tools in ArcGIS to determine variations in the spatial distribution and mean centers between each ENSO phase for each severe weather event type. I found that ENSO phase, particularly La Niña, does impact the frequency and intensity of tornadoes, hail, thunderstorm wind, and heavy rain/flash flood events in Arizona. However, it appears that ENSO does not affect the spatial distribution of these Arizona severe weather phenomena. These findings attempt to fill in the gap in the literature and could help meteorologists better forecast changes in Arizona severe weather, in turn allowing Arizonans to better prepare for and mitigate the effects of severe weather across the state.
ContributorsGreenwood, Trey Austin (Author) / Cerveny, Randall (Thesis director) / Balling, Robert (Committee member) / School of Geographical Sciences and Urban Planning (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This paper proposes a new framework design for the lightweight transradial prosthesis. This device was designed to be light-weight, easily manufactured, inexpensive, and to have a high interstitial free space volume for electrical components and customization. Press-fit junctions between fins allow for little or no adhesives, allowing for easily replaceable parts. Designs were constructed out of chipboard and run through an assortment of tests to see if each design iterations met structural design specifications. There were four main design iterations tested: 4, 8, 12 fin designs, and a 4 fin design with additional angled fins for torsional support (4T). Compression, torsion, and 3-point bending tests were all performed on each cylindrical iteration. Basic tensile and material testing was done on chipboard to support results. The force applied to a human arm during a fall is approximately 500 lbf [13]. Compression tests yielded a strength of approximately 300 lbf for the cylindrical designs. ANOVAs and T-tests were performed to find significance in compressive strength between the design iterations with the varied number of fins (p<<0.05). The torsional strength of the human arm, without causing great strain or discomfort has a max value of approximately 15 Nm [14]. This matched the torsional values of the 4T. design [14]. The 4, 8, and 12 designs' torsional strengths were linear with values of approximately 4, 7, and 12 Nm respectively. The 3-point bending test yielded the flexural stress and strain values to find compressive strength in the convex direction as well as the displacement and deformation in each sample. The material chipboard was found to be variable with elastic modulus, Poisson's ratio, and tensile strength. Each experimental procedure was done as a proof of concept for future prosthesis design.
ContributorsMcbryan, Sarah Jane (Author) / LaBelle, Jeffrey (Thesis director) / Lathers, Steven (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05