Matching Items (3)
Description
The objective of this project was to design an electrically driven centrifugal pump for the Daedalus Astronautics @ASU hybrid rocket engine (HRE). The pump design was purposefully simplified due to time, fabrication, calculation, and capability constraints, which resulted in a lower fidelity design, with the option to be improved later. The impeller, shroud, volute, shaft, motor, and ESC were the main focuses of the pump assembly, but the seals, bearings, lubrication methods, and flow path connections were considered as elements which would require future attention. The resulting pump design is intended to be used on the Daedalus Astronautics HRE test cart for design verification. In the future, trade studies and more detailed analyses should and will be performed before this pump is integrated into the Daedalus Astronautics flight-ready HRE.
ContributorsShillingburg, Ryan Carl (Author) / White, Daniel (Thesis director) / Brunacini, Lauren (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
This thesis examines how a recently proposed concept for a highly-truncated aerospike nozzle
can be expected to perform at altitudes corresponding to ambient pressures from sea-level to
full vacuum conditions, as would occur during second-stage ascent and during second-stage
descent and return to Earth. Of particular importance is how the base pressure varies with
ambient pressure, especially at low ambient pressures for which the resulting highly underexpanded flows exiting from discrete thrust chambers around the truncated aerospike merge to
create a closed (unventilated) base flow. The objective was to develop an approximate but
usefully accurate and technically rooted way of estimating conditions for which the jets issuing
from adjacent thrust chambers will merge before the end of the truncated aerospike is reached.
Three main factors that determine the merging distance are the chamber pressure, the altitude,
and the spacing between adjacent thrust chambers. The Prandtl-Meyer expansion angle was
used to approximate the initial expansion of the jet flow issuing from each thrust chamber.
From this an approximate criterion was developed for the downstream distance at which the
jet flows from adjacent thrust chambers merge. Variations in atmospheric gas composition,
specific heat ratio, temperature, and pressure with altitude from sea-level to 600 km were
accounted for. Results showed that with decreasing atmospheric pressure during vehicle
ascent, the merging distance decreases as the jet flows become increasingly under-expanded.
Increasing the number of thrust chambers decreases the merging distance exponentially, and
increasing chamber pressure results in a decrease of the merging distance as well.
ContributorsHerrington, Katie (Author) / Dahm, Werner (Thesis director) / Takahashi, Timothy (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Department of Physics (Contributor)
Created2024-05
Description
This project examines the dynamics and design of control systems for a rocket in propulsive ascent and descent using a simplified model with motion constrained to a vertical plane. The governing differential equations are analyzed. They are then linearized, after which transfer functions are derived relating controllable input variables to controlled output variables. The effect of changes in various parameters as well as other aspects of the system are examined. Methods for controller design based on the derived transfer functions are discussed. This will include the discussion of control of the final descent and landing of the rocket. Lastly, there is a brief discussion about both the successes and limitations of the model analyzed.
ContributorsWarner, Adin (Author) / Rodriguez, Armando (Thesis director) / Shafique, Ashfaque (Committee member) / Barrett, The Honors College (Contributor) / Electrical Engineering Program (Contributor)
Created2021-12