Matching Items (17)
Description
Proteins and peptides fold into dynamic structures that access a broad functional landscape, however, designing artificial polypeptide systems continues to be a great chal-lenge. Conversely, deoxyribonucleic acid (DNA) engineering is now routinely used to build a wide variety of two dimensional and three dimensional (3D) nanostructures from simple hybridization based rules, and their functional diversity can be significantly ex-panded through site specific incorporation of the appropriate guest molecules. This dis-sertation describes a gentle methodology for using short (8 nucleotide) peptide nucleic acid (PNA) linkers to assemble polypeptides within a 3D DNA nanocage, as a proof of concept for constructing artificial catalytic centers. PNA-polypeptide conjugates were synthesized directly using microwave assisted solid phase synthesis or alternatively PNA linkers were conjugated to biologically expressed proteins using chemical crosslinking. The PNA-polypeptides hybridized to the preassembled DNA nanocage at room tempera-ture or 11 ⁰C and could be assembled in a stepwise fashion. Time resolved fluorescence anisotropy and gel electrophoresis were used to determine that a negatively charged az-urin protein was repelled outside of the negatively charged DNA nanocage, while a posi-tively charged cytochrome c protein was retained inside. Spectroelectrochemistry and an in-gel luminol oxidation assay demonstrated the cytochrome c protein remained active within the DNA nanocage and its redox potential decreased modestly by 10 mV due to the presence of the DNA nanocage. These results demonstrate the benign PNA assembly conditions are ideal for preserving polypeptide structure and function, and will facilitate the polypeptide-based assembly of artificial catalytic centers inside a stable DNA nanocage. A prospective application of assembling multiple cyclic γ-PNA-peptides to mimic the oxygen-evolving complex (OEC) catalytic active site from photosystem II (PSII) is described. In this way, the robust catalytic capacity of PSII could be utilized, without suffering the light-induced damage that occurs by the photoreactions within PSII via triplet state formation, which limits the efficiency of natural photosynthesis. There-fore, this strategy has the potential to revolutionize the process of designing and building robust catalysts by leveraging nature's recipes, and also providing a flexible and con-trolled artificial environment that might even improve them further towards commercial viability.
ContributorsFlory, Justin David (Author) / Fromme, Petra (Thesis advisor) / Yan, Hao (Committee member) / Buttry, Daniel (Committee member) / Ghirlanda, Giovanna (Committee member) / Arizona State University (Publisher)
Created2014
Description
Promoted by the city to increase land values and provide jobs in the barrios of South Phoenix, industry became a force of massive disturbance along Buckeye Road, interrupting the residential scale with large industrial lots, many of which have been abandoned. However, latent in the landscape are remnants of better times in the vibrant gestures of everyday urbanism.
Inspired by this palate of lively, idiosyncratic street designs—created out of necessity by people making-do—this project seeks to bring identity, value, and vitality to this challenging human environment.
This project uses concepts and processes of disturbance ecology and ecological succession, specifically the role played by pioneer species and biological legacies in the immediate aftermath of the eruption of Mount St. Helens, to develop an urban revitalization plan for Buckeye Road.
Inspired by this palate of lively, idiosyncratic street designs—created out of necessity by people making-do—this project seeks to bring identity, value, and vitality to this challenging human environment.
This project uses concepts and processes of disturbance ecology and ecological succession, specifically the role played by pioneer species and biological legacies in the immediate aftermath of the eruption of Mount St. Helens, to develop an urban revitalization plan for Buckeye Road.
ContributorsWhitesides, Ashley Nicole (Author) / Petrucci, Darren (Thesis director) / Hejduk, Renata (Committee member) / Fischer, Heidi (Committee member) / The Design School (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The goal of this project was to explore biomimetics by creating a jellyfish flying device that uses propulsion of air to levitate while utilizing electromyography signals and infrared signals as mechanisms to control the device. Completing this project would require knowledge of biological signals, electrical circuits, computer programming, and physics to accomplish. An EMG sensor was used to obtain processed electrical signals produced from the muscles in the forearm and was then utilized to control the actuation speed of the tentacles. An Arduino microprocessor was used to translate the EMG signals to infrared blinking sequences which would propagate commands through a constructed circuit shield to the infrared receiver on jellyfish. The receiver will then translate the received IR sequence into actions. Then the flying device must produce enough thrust to propel the body upwards. The application of biomimetics would best test my skills as an engineer as well as provide a method of applying what I have learned over the duration of my undergraduate career.
ContributorsTsui, Jessica W (Author) / Muthuswamy, Jitteran (Thesis director) / Blain Christen, Jennifer (Committee member) / Barrett, The Honors College (Contributor) / Harrington Bioengineering Program (Contributor)
Created2014-05
Description
This creative project explores how macro-ecological photography can serve as a community engagement tool for the field of biomimicry, meant to provoke interest in the subject. My photos, and the organisms pictured in them, were hand selected for this project to form one cohesive, aesthetic set. The appeal of the colorful pictures captured the attention of audience members so they felt more inclined to learn about the informational content accompanying the art. Each picture is coupled with a scientific explanation as to how the pictured organism relates to the field of biomimicry, including concrete examples of its application. To maximize exposure of the project, I published my photos through a website and an e-book, and also presented them as a live photography exhibit on campus at Arizona State University.
ContributorsGerber, Haley Dawn (Author) / Jenik, Adriene (Thesis director) / Walters, Molina (Committee member) / Division of Teacher Preparation (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
The trends of products made by today’s companies follow a traditional linear economy where materials for products and services are taken, made, and then used until they are disposed of. In this model cheap materials are relied on in large amounts and our current rate of usage is unsustainable. Pollution and climate change are effects of this linear economy, and in order to secure a sustainable future for life on this planet, this model is not fit. A circular business model is the future for companies and products. Circular design and biomimicry are at the forefront of this transition. In conjuncture with the InnovationSpace program, I have developed a product for, and sponsored by, Adidas. The product utilizes a circular business model and a sustainable product ecosystem after using biomimicry as a tool for inspiration. The project was driven by this primary research question presented by Adidas: How can we embrace a true circular economy with far more reuse and recycling incorporated, while ensuring that all products travel from factory to foot in a more sustainable way while providing an engaging consumer experience? The goal
of this project was to generate solutions that can be applied to a broad range of products at Adidas.
The product developed is called Neomod, a modular shoe system. People buy shoes both for fashion and function, with the average American owning nineteen pairs. However, countless numbers of partially worn shoes end up in landfills because the materials they are made of are difficult to separate and replace. This is why we designed Neomod; a modular shoe made with interchangeable parts. It makes recycling shoes simpler, but at the same time, provides users with a variety of styles to mix and match to fit their lifestyle. Neomod’s goal is to minimize the amount of waste created and allows all parts of the shoe to be used until its end of life. As consumers buy, recycle, and reuse Neomod shoes, they will help the world work towards a more circular economy.
The product developed is called Neomod, a modular shoe system. People buy shoes both for fashion and function, with the average American owning nineteen pairs. However, countless numbers of partially worn shoes end up in landfills because the materials they are made of are difficult to separate and replace. This is why we designed Neomod; a modular shoe made with interchangeable parts. It makes recycling shoes simpler, but at the same time, provides users with a variety of styles to mix and match to fit their lifestyle. Neomod’s goal is to minimize the amount of waste created and allows all parts of the shoe to be used until its end of life. As consumers buy, recycle, and reuse Neomod shoes, they will help the world work towards a more circular economy.
ContributorsReniewicki, Johnathan Robert (Author) / Sanft, Alfred (Thesis director) / Boradkar, Prasad (Committee member) / The Design School (Contributor) / Sandra Day O'Connor College of Law (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Clean and accessible drinking water is a crucial and limited resource. As the world's population grows and demand increases, water resources will become more limited. This project aims to educate students on water resources, drinking water, and how biomimicry can allow society to improve its water usage. The project consists of a ten day unit plan which addresses several water topics such as: the various uses of water, water distribution, where drinking water comes from, the water treatment process, and more. After establishing background knowledge on water and surrounding issues, the students will be challenged to design a water bottle using biomimicry. Biomimicry is looking at nature to draw and inspire solutions to human problems. This unit has been optimized for use by elementary teachers. The ten day unit consists of a lesson summary, objectives, standards, and recommended activities for each day. Of the ten days, three lesson plans were fully developed using the 5E format. The research supporting this project is compiled in the following report.
ContributorsSalik, Rachael (Co-author) / Burke, Aurora (Co-author) / Walters, Molina (Thesis director) / Larson, Kelli L. (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Division of Teacher Preparation (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Unmanned aerial vehicles have received increased attention in the last decade due to their versatility, as well as the availability of inexpensive sensors (e.g. GPS, IMU) for their navigation and control. Multirotor vehicles, specifically quadrotors, have formed a fast growing field in robotics, with the range of applications spanning from surveil- lance and reconnaissance to agriculture and large area mapping. Although in most applications single quadrotors are used, there is an increasing interest in architectures controlling multiple quadrotors executing a collaborative task. This thesis introduces a new concept of control involving more than one quadrotors, according to which two quadrotors can be physically coupled in mid-flight. This concept equips the quadro- tors with new capabilities, e.g. increased payload or pursuit and capturing of other quadrotors. A comprehensive simulation of the approach is built to simulate coupled quadrotors. The dynamics and modeling of the coupled system is presented together with a discussion regarding the coupling mechanism, impact modeling and additional considerations that have been investigated. Simulation results are presented for cases of static coupling as well as enemy quadrotor pursuit and capture, together with an analysis of control methodology and gain tuning. Practical implementations are introduced as results show the feasibility of this design.
ContributorsLarsson, Daniel (Author) / Artemiadis, Panagiotis (Thesis advisor) / Marvi, Hamidreza (Committee member) / Berman, Spring (Committee member) / Arizona State University (Publisher)
Created2016
Description
Biomimicry is an approach that entails understanding the natural system and designs and mimicking them to create new non-biological systems that can solve human problems. From bio-based material development to biologically inspired designs, architects and designers excelled in highlighting the fascination of integrating the biomimetic thinking process into the modern design that provides more comfortable space in which to live. This thesis explores how historical sustainable strategies from Islamic traditional architecture incorporated natural design system that could now be appropriately applied to interior architecture. In addition, it explores the current existing problems in this field and the possibilities of biomimetic sustainable solutions for existing buildings in the hot dry climate regions of Saudi Arabia.
The author concentrates on examining Islamic traditional architecture where the past architects incorporated certain aspects of nature in their construction and through using local resources, built buildings that mitigated heat and provided protection from cold. As a result of completing this research, it was found that there are common characteristics between the traditional Islamic architecture elements and system solutions found in some natural organisms. Characteristics included, for example, evaporative cooling, stuck effect, and avoiding heat gain. However, in the natural world, there is always opportunities to further explore more about the impacts of biomimicry and natural strategies applicable to enhance interior environments of buildings.
The author concentrates on examining Islamic traditional architecture where the past architects incorporated certain aspects of nature in their construction and through using local resources, built buildings that mitigated heat and provided protection from cold. As a result of completing this research, it was found that there are common characteristics between the traditional Islamic architecture elements and system solutions found in some natural organisms. Characteristics included, for example, evaporative cooling, stuck effect, and avoiding heat gain. However, in the natural world, there is always opportunities to further explore more about the impacts of biomimicry and natural strategies applicable to enhance interior environments of buildings.
ContributorsHawsawi, Hawaa Ismail (Author) / Bernardi, Jose (Thesis advisor) / Fehler, Michelle (Committee member) / Harmon-Vaughan, Elizabeth (Committee member) / Arizona State University (Publisher)
Created2016
Description
Development of efficient and renewable electrocatalytic systems is foundational to creation of effective means to produce solar fuels. Many redox enzymes are functional electrocatalysts when immobilized on an electrode, but long-term stability of isolated proteins limits use in applications. Thus there is interest in developing bio-inspired functional catalysts or electrocatalytic systems based on living organisms. This dissertation describes efforts to create both synthetic and biological electrochemical systems for electrocatalytic hydrogen production.
The first part of this dissertation describes the preparation of three different types of proton reduction catalysts. First, four bioinspired diiron complexes of the form (μ-SRS)Fe(CO)3[Fe(CO)(N-N)] for SRS = 1,2-benzenedithiolate (bdt) and 1,3-propanedithiolate (pdt) and N-N = 2,2’-bipyridine (bpy) and 2,2’-bypyrimidine (bpym), are described. Electrocatatlytic experiments show that although the byprimidinal complexes are not catalysts, the bipyridyl complexes produce hydrogen from acetic acid under reducing conditions. Second, three new mononuclear FeII carbonyl complexes of the form [Fe(CO)(bdt)(PPh2)2] in which P2 = bis-phosphine: 4,5-Bis(diphenylphosphino)- 9,9-dimethylxanthene (Xantphos), 1,2-Bis(diphenylphosphino)benzene (dppb), or cis- 1,2-Bis(diphenylphosphino)ethylene (dppv) are described. All are functional bio-inspired models of the distal Fe site of [FeFe]-hydrogenases. Of these, the Xanthphos complex is the most stable to redox reactions and active as an electrocatalyst. Third, a molybdenum catalyst based on the redox non-innocent PDI ligand framework is also shown to produce hydrogen in the presence of acid.
The second part of this dissertation describes creating functional interfaces between chemical and biological models at electrode surfaces to create electroactive systems. First, covalent tethering of the redox probe ferrocene to thiol-functionalized reduced graphene oxide is demonstrated. I demonstrate that this attachment is via the thiol functional groups. Second, I demonstrate the ability to use electricity in combination with light to drive production of hydrogen by the anaerobic, phototrophic microorganism Heliobacterium modesticaldum.
The first part of this dissertation describes the preparation of three different types of proton reduction catalysts. First, four bioinspired diiron complexes of the form (μ-SRS)Fe(CO)3[Fe(CO)(N-N)] for SRS = 1,2-benzenedithiolate (bdt) and 1,3-propanedithiolate (pdt) and N-N = 2,2’-bipyridine (bpy) and 2,2’-bypyrimidine (bpym), are described. Electrocatatlytic experiments show that although the byprimidinal complexes are not catalysts, the bipyridyl complexes produce hydrogen from acetic acid under reducing conditions. Second, three new mononuclear FeII carbonyl complexes of the form [Fe(CO)(bdt)(PPh2)2] in which P2 = bis-phosphine: 4,5-Bis(diphenylphosphino)- 9,9-dimethylxanthene (Xantphos), 1,2-Bis(diphenylphosphino)benzene (dppb), or cis- 1,2-Bis(diphenylphosphino)ethylene (dppv) are described. All are functional bio-inspired models of the distal Fe site of [FeFe]-hydrogenases. Of these, the Xanthphos complex is the most stable to redox reactions and active as an electrocatalyst. Third, a molybdenum catalyst based on the redox non-innocent PDI ligand framework is also shown to produce hydrogen in the presence of acid.
The second part of this dissertation describes creating functional interfaces between chemical and biological models at electrode surfaces to create electroactive systems. First, covalent tethering of the redox probe ferrocene to thiol-functionalized reduced graphene oxide is demonstrated. I demonstrate that this attachment is via the thiol functional groups. Second, I demonstrate the ability to use electricity in combination with light to drive production of hydrogen by the anaerobic, phototrophic microorganism Heliobacterium modesticaldum.
ContributorsLaureanti, Joseph Anthony (Author) / Jones, Anne K. (Thesis advisor) / Moore, Thomas (Committee member) / Redding, Kevin E. (Committee member) / Arizona State University (Publisher)
Created2017
Description
The Sonoran Desert in the Southwest region of the United States and the Northwest corner of Mexico is defined by low precipitation rates that are episodal, oscillating between years of higher yields than average and then below average levels. Water is essential for life and in the region, the lack of water proves an obstacle for people that must be faced to live and thrive there. Yet, millions of people live in this desert region and more people are moving currently. As current water resources are straining not only under increasing population but also with higher frequency and lengths of droughts in the region, water is becoming an important topic for future plans in the Sonoran Desert. However, a vast array of plants and animals have lived under these conditions by adapting to the low precipitation rates. By looking at the common flora and fauna of the region, humans may learn how to better live in the Sonoran Desert through biomimicry, the imitation of life. The natural design and processes of life in the Sonoran Desert can be studied to find ways to conserve, store and collect water for human consumption ensuring longevity within the region and beyond as water insecurity increases globally.
ContributorsGustin, Eden (Author) / Hedges, Craig (Thesis director) / Fischer, Adelheid (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / Chemical Engineering Program (Contributor)
Created2023-05