Matching Items (5)
Filtering by
- All Subjects: Biogeochemistry
- Creators: Kavazanjian, Edward
- Member of: Theses and Dissertations
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
Description
Currently conventional Subtitle D landfills are the primary means of disposing of our waste in the United States. While this method of waste disposal aims at protecting the environment, it does so through the use of liners and caps that effectively freeze the breakdown of waste. Because this method can keep landfills active, and thus a potential groundwater threat for over a hundred years, I take an in depth look at the ability of bioreactor landfills to quickly stabilize waste. In the thesis I detail the current state of bioreactor landfill technologies, assessing the pros and cons of anaerobic and aerobic bioreactor technologies. Finally, with an industrial perspective, I conclude that moving on to bioreactor landfills as an alternative isn't as simple as it may first appear, and that it is a contextually specific solution that must be further refined before replacing current landfills.
ContributorsWhitten, George Avery (Author) / Kavazanjian, Edward (Thesis director) / Allenby, Braden (Committee member) / Houston, Sandra (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2013-05
Description
Two challenges in the implementation of enzyme induced carbonate precipitation(EICP) are the cost of enzyme and the variability of the enzyme. Urease enzyme costs
can be lowered drastically with the use of crude extract from plant materials, but
experience has shown variability in the source of the crude urease enzyme, the crude
urease enzyme extraction methods, and the concentration of the EICP solution can cause
significant variability in the efficacy of the EICP solution.
This thesis examines the variability in the efficacy of crude enzyme derived from
jack beans (Canavalia ensiformis) and sword beans (Canavalia gladiata), two of the
most commonly used sources of urease enzyme for EICP. The sources of variability
investigated herein include the crude extraction method (including the effect of the bean
husks on extraction) and different chemical constituent concentrations. These effects
were assessed using enzyme activity measurements and precipitation efficiency tests. The
activity tests were performed via spectrophotometry using Nessler's reagent. The
precipitation tests looked at the influence of chemical constituent concentrations of 0.67
M calcium chloride and 1 M urea with non-fat dry milk in the EICP solutions and a
higher concentration solution with chemical constituent concentrations of 2 M for both
calcium chloride and urea with non-fat dry milk. The high concentration solution was
selected based on preliminary testing results to maximize carbonate precipitation in one
cycle of treatment. Significant sources of a decline in activity (and increase in variation)
of the crude urease enzyme were found in extraction from sword beans with husks, high
chemical constituent concentrations, and juicing instead of cheesecloth filtration.
This thesis also examines the accuracy of commonly used correlation factors for
converting electrical conductivity to urease enzyme activity. Crude jack bean and sword
bean urease enzyme activity measurement via electrical conductivity was found to have a
correlation coefficient that differed from the previously reported correlation when
compared to activity measured via the more accurate spectrophotometry using Nessler’s
reagent measurements.
ContributorsPearson, Rayanna (Author) / Kavazanjian, Edward (Thesis advisor) / Khodadadi Tirkolaei, Hamed (Committee member) / Salifu, Emmanuel (Committee member) / Arizona State University (Publisher)
Created2022
Description
The potential of using bio-geo-chemical processes for applications in geotechnical engineering has been widely explored in order to overcome the limitation of traditional ground improvement techniques. Biomineralization via urea hydrolysis, referred to as Microbial or Enzymatic Induced Carbonate Precipitation (MICP/EICP), has been shown to increase soil strength by stimulating precipitation of calcium carbonate minerals, bonding soil particles and filling the pores. Microbial Induced Desaturation and Precipitation (MIDP) via denitrification has also been studied for its potential to stabilize soils through mineral precipitation, but also through production of biogas, which can mitigate earthquake induced liquefaction by desaturation of the soil. Empirical relationships have been established, which relate the amount of products of these biochemical processes to the engineering properties of treated soils. However, these engineering properties may vary significantly depending on the biomineral and biogas formation mechanism and distribution patterns at pore-scale. This research focused on the pore-scale characterization of biomineral and biogas formations in porous media.
The pore-scale characteristics of calcium carbonate precipitation via EICP and biogenic gas formation via MIDP were explored by visual observation in a transparent porous media using a microfluidic chip. For this purpose, an imaging system was designed and image processing algorithms were developed to analyze the experimental images and detect the nucleation and growth of precipitated minerals and formation and migration mechanisms of gas bubbles within the microfluidic chip. Statistical analysis was performed based on the processed images to assess the evolution of biomineral size distribution, the number of precipitated minerals and the porosity reduction in time. The resulting images from the biomineralization study were used in a numerical simulation to investigate the relation between the mineral distribution, porosity-permeability relationships and process efficiency. By comparing biogenic gas production with abiotic gas production experiments, it was found that the gas formation significantly affects the gas distribution and resulting degree of saturation. The experimental results and image analysis provide insight in the kinetics of the precipitation and gas formation processes and their resulting distribution and related engineering properties.
The pore-scale characteristics of calcium carbonate precipitation via EICP and biogenic gas formation via MIDP were explored by visual observation in a transparent porous media using a microfluidic chip. For this purpose, an imaging system was designed and image processing algorithms were developed to analyze the experimental images and detect the nucleation and growth of precipitated minerals and formation and migration mechanisms of gas bubbles within the microfluidic chip. Statistical analysis was performed based on the processed images to assess the evolution of biomineral size distribution, the number of precipitated minerals and the porosity reduction in time. The resulting images from the biomineralization study were used in a numerical simulation to investigate the relation between the mineral distribution, porosity-permeability relationships and process efficiency. By comparing biogenic gas production with abiotic gas production experiments, it was found that the gas formation significantly affects the gas distribution and resulting degree of saturation. The experimental results and image analysis provide insight in the kinetics of the precipitation and gas formation processes and their resulting distribution and related engineering properties.
ContributorsKim, Daehyun (Author) / van Paassen, Leon (Thesis advisor) / Kavazanjian, Edward (Committee member) / Zapata, Claudia (Committee member) / Mahabadi, Nariman (Committee member) / Tao, Junliang (Committee member) / Jang, Jaewon (Committee member) / Arizona State University (Publisher)
Created2019
Description
Water is a vital resource, and its protection is a priority world-wide. One widespread threat to water quality is contamination by chlorinated solvents. These dry-cleaning and degreasing agents entered the watershed through spills and improper disposal and now are detected in 4% of U.S. aquifers and 4.5-18% of U.S. drinking water sources. The health effects of these contaminants can be severe, as they are associated with damage to the nervous, liver, kidney, and reproductive systems, developmental issues, and possibly cancer. Chlorinated solvents must be removed or transformed to improve water quality and protect human and environmental health. One remedy, bioaugmentation, the subsurface addition of microbial cultures able to transform contaminants, has been implemented successfully at hundreds of sites since the 1990s. Bioaugmentation uses the bacteria Dehalococcoides to transform chlorinated solvents with hydrogen, H2, as the electron donor. At advection limited sites, bioaugmentation can be combined with electrokinetics (EK-Bio) to enhance transport. However, challenges for successful bioremediation remain. In this work I addressed several knowledge gaps surrounding bioaugmentation and EK-Bio. I measured the H2 consuming capacity of soils, detailed the microbial metabolisms driving this demand, and evaluated how these finding relate to reductive dechlorination. I determined which reactions dominated at a contaminated site with mixed geochemistry treated with EK-Bio and compared it to traditional bioaugmentation. Lastly, I assessed the effect of EK-Bio on the microbial community at a field-scale site. Results showed the H2 consuming capacity of soils was greater than that predicted by initial measurements of inorganic electron acceptors and primarily driven by carbon-based microbial metabolisms. Other work demonstrated that, given the benefits of some carbon-based metabolisms to microbial reductive dechlorination, high levels of H2 consumption in soils are not necessarily indicative of hostile conditions for Dehalococcoides. Bench-scale experiments of EK-Bio under mixed geochemical conditions showed EK-Bio out-performed traditional bioaugmentation by facilitating biotic and abiotic transformations. Finally, results of microbial community analysis at a field-scale implementation of EK-Bio showed that while there were significant changes in alpha and beta diversity, the impact of EK-Bio on native microbial communities was minimal.
ContributorsAltizer, Megan Leigh (Author) / Torres, César I (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Rittmann, Bruce E (Committee member) / Kavazanjian, Edward (Committee member) / Delgado, Anca G (Committee member) / Arizona State University (Publisher)
Created2020
Description
Urease, an amidohydrolase, is an essential ingredient in the emerging engineering technique of biocementation. When free urease enzyme is used this carbonate precipitation process is often referred to as enzyme induced carbonate precipitation (EICP). To date, most engineering applications of EICP have used commercially available powdered urease. However, the high cost of commercially available urease is a major barrier to adoption of engineering applications of EICP in practice. The objective of this dissertation was to develop a simple and inexpensive enzyme production technique using agricultural resources. The specific objectives of this dissertation were (i) to develop a simple extraction process to obtain urease from common agricultural resources and identify a preferred agricultural resource for further study, (ii) to reduce the cost of enzyme production by eliminating the use of a buffer, centrifugation, and dehusking of the beans during the extraction process, (iii) investigate the stability of the extracted enzyme both in solution and after reduction to a powder by lyophilization (freeze-drying), and (iv) to study the kinetics of the extracted enzyme.
The results presented in this dissertation confirmed that inexpensive crude extracts of urease from agricultural products, including jack beans, soybeans, and watermelon seeds, are effective at catalyzing urea hydrolysis for carbonate precipitation. Based upon unit yield, jack beans were identified as the preferred agricultural resource for urease extraction. Results also showed that the jack bean extract retained its activity even after replacing the buffer with tap water and eliminating acetone fractionation, centrifugation, and dehusking. It was also found that the lyophilized crude extract maintained its activity during storage for at least one year and more effectively than either the crude extract solution or rehydrated commercial urease. The kinetics of the extracted enzyme was studied to gain greater insight into the optimum concentration of urea in engineering applications of EICP. Results showed higher values for the half-saturation coefficient of the crude extract compared to the commercial enzymes.
The results presented in this dissertation demonstrate the potential for a significant reduction in the cost of applying EICP in engineering practice by mass production of urease enzyme via a simple extraction process.
ContributorsJavadi, Neda (Author) / Kavazanjian, Edward (Thesis advisor) / Khodadadi Tirkolaei, Hamed (Committee member) / Hamadan, Naser (Committee member) / Delgado, Anca (Committee member) / Arizona State University (Publisher)
Created2021