Matching Items (3)
Filtering by
- All Subjects: Sensors
- All Subjects: fountain code
- Creators: Boscovic, Dragan
- Resource Type: Text
Description
Blockchain scalability is one of the issues that concerns its current adopters. The current popular blockchains have initially been designed with imperfections that in- troduce fundamental bottlenecks which limit their ability to have a higher throughput and a lower latency.
One of the major bottlenecks for existing blockchain technologies is fast block propagation. A faster block propagation enables a miner to reach a majority of the network within a time constraint and therefore leading to a lower orphan rate and better profitability. In order to attain a throughput that could compete with the current state of the art transaction processing, while also keeping the block intervals same as today, a 24.3 Gigabyte block will be required every 10 minutes with an average transaction size of 500 bytes, which translates to 48600000 transactions every 10 minutes or about 81000 transactions per second.
In order to synchronize such large blocks faster across the network while maintain- ing consensus by keeping the orphan rate below 50%, the thesis proposes to aggregate partial block data from multiple nodes using digital fountain codes. The advantages of using a fountain code is that all connected peers can send part of data in an encoded form. When the receiving peer has enough data, it then decodes the information to reconstruct the block. Along with them sending only part information, the data can be relayed over UDP, instead of TCP, improving upon the speed of propagation in the current blockchains. Fountain codes applied in this research are Raptor codes, which allow construction of infinite decoding symbols. The research, when applied to blockchains, increases success rate of block delivery on decode failures.
One of the major bottlenecks for existing blockchain technologies is fast block propagation. A faster block propagation enables a miner to reach a majority of the network within a time constraint and therefore leading to a lower orphan rate and better profitability. In order to attain a throughput that could compete with the current state of the art transaction processing, while also keeping the block intervals same as today, a 24.3 Gigabyte block will be required every 10 minutes with an average transaction size of 500 bytes, which translates to 48600000 transactions every 10 minutes or about 81000 transactions per second.
In order to synchronize such large blocks faster across the network while maintain- ing consensus by keeping the orphan rate below 50%, the thesis proposes to aggregate partial block data from multiple nodes using digital fountain codes. The advantages of using a fountain code is that all connected peers can send part of data in an encoded form. When the receiving peer has enough data, it then decodes the information to reconstruct the block. Along with them sending only part information, the data can be relayed over UDP, instead of TCP, improving upon the speed of propagation in the current blockchains. Fountain codes applied in this research are Raptor codes, which allow construction of infinite decoding symbols. The research, when applied to blockchains, increases success rate of block delivery on decode failures.
ContributorsChawla, Nakul (Author) / Boscovic, Dragan (Thesis advisor) / Candan, Kasim S (Thesis advisor) / Zhao, Ming (Committee member) / Arizona State University (Publisher)
Created2018
Description
This paper summarizes the [1] ideas behind, [2] needs, [3] development, and [4] testing of 3D-printed sensor-stents known as Stentzors. This sensor was successfully developed entirely from scratch, tested, and was found to have an output of 3.2*10-6 volts per RMS pressure in pascals. This paper also recommends further work to render the Stentzor deployable in live subjects, including [1] further design optimization, [2] electrical isolation, [3] wireless data transmission, and [4] testing for aneurysm prevention.
ContributorsMeidinger, Aaron Michael (Author) / LaBelle, Jeffrey (Thesis director) / Frakes, David (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2014-05
Description
This dissertation focused on the implementation of urine diversion systems in commercial and institutional buildings in the United States with a focus on control of the urea hydrolysis reaction. Urine diversion is the process by which urine is separately collected at the source in order to realize system benefits, including water conservation, nutrient recovery, and pharmaceutical removal. Urine diversion systems depend greatly on the functionality of nonwater urinals and urine diverting toilets, which are needed to collect undiluted urine. However, the urea hydrolysis reaction creates conditions that lead to precipitation in the fixtures due to the increase in pH from 6 to 9 as ammonia and bicarbonate are produced. Chapter 2 and Chapter 3 describes the creation and use of a cyber-physical system (CPS) to monitor and control urea hydrolysis in the urinal testbed. Two control logics were used to control urea hydrolysis in realistic restroom conditions. In the experiments, acid was added to inhibit urea hydrolysis during periods of high and low building occupancy. These results were able to show that acid should be added based on the restroom use in order to efficiently inhibit urea hydrolysis.
Chapter 4 advanced the results from Chapter 3 by testing the acid addition control logics in a real restroom with the urinal-on-wheels. The results showed that adding acid during periods of high building occupancy equated to the least amount of acid added and allowed for urea hydrolysis inhibition. This study also analyzed the bacterial communities of the collected urine and found that acid addition changed the structure of the bacterial communities.
Chapter 5 showed an example of the capabilities of a CPS when implemented in CI buildings. The study used data mining methods to predict chlorine residuals in premise plumbing in a CI green building. The results showed that advance modeling methods were able to model the system better than traditional methods. These results show that CPS technology can be used to illuminate systems and can provide information needed to understand conditions within CI buildings.
ContributorsSaetta, Daniella (Author) / Boyer, Treavor H (Thesis advisor) / Hamilton, Kerry (Committee member) / Ross, Heather M. (Committee member) / Boscovic, Dragan (Committee member) / Arizona State University (Publisher)
Created2021