Matching Items (4)
Filtering by

Clear all filters

134375-Thumbnail Image.png
Description
To determine the effects of exhaust heat recovery systems on small engines, an experiment was performed to measure the power losses of an engine with restricted exhaust flow. In cooperation with ASU's SAE Formula race team, a water brake dynamometer was refurbished and connected to the 2017 racecar engine. The

To determine the effects of exhaust heat recovery systems on small engines, an experiment was performed to measure the power losses of an engine with restricted exhaust flow. In cooperation with ASU's SAE Formula race team, a water brake dynamometer was refurbished and connected to the 2017 racecar engine. The engine was mounted with a diffuser disc exhaust to restrict flow, and a pressure sensor was installed in the O2 port to measure pressure under different restrictions. During testing, problems with the equipment prevented suitable from being generated. Using failure root cause analysis, the failure modes were identified and plans were made to resolve those issues. While no useful data was generated, the project successfully rebuilt a dynamometer for students to use for future engine research.
ContributorsRoss, Zachary David (Author) / Middleton, James (Thesis director) / Steele, Bruce (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description

We implemented the well-known Ising model in one dimension as a computer program and simulated its behavior with four algorithms: (i) the seminal Metropolis algorithm; (ii) the microcanonical algorithm described by Creutz in 1983; (iii) a variation on Creutz’s time-reversible algorithm allowing for bonds between spins to change dynamically; and

We implemented the well-known Ising model in one dimension as a computer program and simulated its behavior with four algorithms: (i) the seminal Metropolis algorithm; (ii) the microcanonical algorithm described by Creutz in 1983; (iii) a variation on Creutz’s time-reversible algorithm allowing for bonds between spins to change dynamically; and (iv) a combination of the latter two algorithms in a manner reflecting the different timescales on which these two processes occur (“freezing” the bonds in place for part of the simulation). All variations on Creutz’s algorithm were symmetrical in time, and thus reversible. The first three algorithms all favored low-energy states of the spin lattice and generated the Boltzmann energy distribution after reaching thermal equilibrium, as expected, while the last algorithm broke from the Boltzmann distribution while the bonds were “frozen.” The interpretation of this result as a net increase to the system’s total entropy is consistent with the second law of thermodynamics, which leads to the relationship between maximum entropy and the Boltzmann distribution.

ContributorsLewis, Aiden (Author) / Chamberlin, Ralph (Thesis director) / Beckstein, Oliver (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Department of Physics (Contributor)
Created2023-05
Description

The photodissociation of 1-bromobutane is explored using pump-probe spectroscopy and time-of-flight mass spectrometry. Fragments of bromobutane are constructed computationally and theoretical energies are calculated using Gaussian 16 software. It is determined that the dissociation of bromine from the parent molecule is the most observed fragmentation pathway arising from the excitation

The photodissociation of 1-bromobutane is explored using pump-probe spectroscopy and time-of-flight mass spectrometry. Fragments of bromobutane are constructed computationally and theoretical energies are calculated using Gaussian 16 software. It is determined that the dissociation of bromine from the parent molecule is the most observed fragmentation pathway arising from the excitation of the ground state parent molecule to a dissociative A state using two 400 nm, 3.1 eV pump photons. The dissociation energy of this pathway is 2.91 eV, leaving 3.3 eV of energy that is redistributed into the product fragments as vibrational energy. C4H9 has the highest relative intensity in the mass spectrum with a relative intensity of 1.00. It is followed by C2H5 and C2H4 at relative intensities of 0.73 and 0.29 respectively. Because of the negative correlation between C4H9 and these two fragments at positive time delays, it is concluded that most of these smaller molecules are formed from the further dissociation of the fragment C4H9 rather than any alternative pathways from the parent molecule. Thermodynamic analysis of these pathways has displayed the power of thermodynamic prediction as well as its limitations as it fails to consider kinetic limitations in dissociation reactions.

ContributorsGosman, Robert (Author) / Sayres, Scott (Thesis director) / Chizmeshya, Andrew (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor) / Department of Physics (Contributor)
Created2023-05
132590-Thumbnail Image.png
Description
Carbon allotropes are the basis for many exciting advancements in technology. While sp² and sp³ hybridizations are well understood, the sp¹ hybridized carbon has been elusive. However, with recent advances made using a pulsed laser ablation in liquid technique, sp¹ hybridized carbon allotropes have been created. The fabricated carbon chain

Carbon allotropes are the basis for many exciting advancements in technology. While sp² and sp³ hybridizations are well understood, the sp¹ hybridized carbon has been elusive. However, with recent advances made using a pulsed laser ablation in liquid technique, sp¹ hybridized carbon allotropes have been created. The fabricated carbon chain is composed of sp¹ and sp³ hybridized bonds, but it also incorporates nanoparticles such as gold or possibly silver to stabilize the chain. The polyyne generated in this process is called pseudocarbyne due to its striking resemblance to the theoretical carbyne. The formation of these carbon chains is yet to be fully understood, but significant progress has been made in determining the temperature of the plasma in which the pseudocarbyne is formed. When a 532 nm pulsed laser with a pulsed energy of 250 mJ and pulse length of 10ns is used to ablate a gold target, a peak temperature of 13400 K is measured. When measured using Laser-Induced Breakdown spectroscopy (LIBS) the average temperature of the neutral carbon plasma over one second was 4590±172 K. This temperature strongly suggests that the current theoretical model used to describe the temperature at which pseudocarbyne generates is accurate.
ContributorsWala, Ryland Gerald (Co-author) / Wala, Ryland (Co-author) / Sayres, Scott (Thesis director) / Steimle, Timothy (Committee member) / Drucker, Jeffery (Committee member) / Historical, Philosophical & Religious Studies (Contributor) / Dean, W.P. Carey School of Business (Contributor) / Department of Physics (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2019-05