Matching Items (12)
Filtering by
- Genre: Doctoral Dissertation
- Creators: Arizona State University
Description
HgCdTe is the dominant material currently in use for infrared (IR) focal-plane-array (FPA) technology. In this dissertation, transmission electron microscopy (TEM) was used for the characterization of epitaxial HgCdTe epilayers and HgCdTe-based devices. The microstructure of CdTe surface passivation layers deposited either by hot-wall epitaxy (HWE) or molecular beam epitaxy (MBE) on HgCdTe heterostructures was evaluated. The as-deposited CdTe passivation layers were polycrystalline and columnar. The CdTe grains were larger and more irregular when deposited by HWE, whereas those deposited by MBE were generally well-textured with mostly vertical grain boundaries. Observations and measurements using several TEM techniques showed that the CdTe/HgCdTe interface became considerably more abrupt after annealing, and the crystallinity of the CdTe layer was also improved. The microstructure and compositional profiles of CdTe(211)B/ZnTe/Si(211) heterostructures grown by MBE was investigated. Many inclined {111}-type stacking faults were present throughout the thin ZnTe layer, terminating near the point of initiation of CdTe growth. A rotation angle of about 3.5° was observed between lattice planes of the Si substrate and the final CdTe epilayer. Lattice parameter measurement and elemental profiles indicated that some local intermixing of Zn and Cd had taken place. The average widths of the ZnTe layer and the (Cd, Zn)Te transition region were found to be roughly 6.5 nm and 3.5 nm, respectively. Initial observations of CdTe(211)B/GaAs(211) heterostructures indicated much reduced defect densities near the vicinity of the substrate and within the CdTe epilayers. HgCdTe epilayers grown on CdTe(211)B/GaAs(211) composite substrate were generally of high quality, despite the presence of precipitates at the HgCdTe/CdTe interface. The microstructure of HgCdSe thin films grown by MBE on ZnTe/Si(112) and GaSb(112) substrates were investigated. The quality of the HgCdSe growth was dependent on the growth temperature and materials flux, independent of the substrate. The materials grown at 100°C were generally of high quality, while those grown at 140°C had {111}-type stacking defects and high dislocation densities. For epitaxial growth of HgCdSe on GaSb substrates, better preparation of the GaSb buffer layer will be essential in order to ensure that high-quality HgCdSe can be grown.
ContributorsZhao, Wenfeng (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha (Committee member) / Carpenter, Ray (Committee member) / Bennett, Peter (Committee member) / Treacy, Michael J. (Committee member) / Arizona State University (Publisher)
Created2011
Description
Semiconductor nanowires (NWs) are one dimensional materials and have size quantization effect when the diameter is sufficiently small. They can serve as optical wave guides along the length direction and contain optically active gain at the same time. Due to these unique properties, NWs are now very promising and extensively studied for nanoscale optoelectronic applications. A systematic and comprehensive optical and microstructural study of several important infrared semiconductor NWs is presented in this thesis, which includes InAs, PbS, InGaAs, erbium chloride silicate and erbium silicate. Micro-photoluminescence (PL) and transmission electron microscope (TEM) were utilized in conjunction to characterize the optical and microstructure of these wires. The focus of this thesis is on optical study of semiconductor NWs in the mid-infrared wavelengths. First, differently structured InAs NWs grown using various methods were characterized and compared. Three main PL peaks which are below, near and above InAs bandgap, respectively, were observed. The octadecylthiol self-assembled monolayer was employed to passivate the surface of InAs NWs to eliminate or reduce the effects of the surface states. The band-edge emission from wurtzite-structured NWs was completely recovered after passivatoin. The passivated NWs showed very good stability in air and under heat. In the second part, mid-infrared optical study was conducted on PbS wires of subwavelength diameter and lasing was demonstrated under optical pumping. The PbS wires were grown on Si substrate using chemical vapor deposition and have a rock-salt cubic structure. Single-mode lasing at the wavelength of ~3000-4000 nm was obtained from single as-grown PbS wire up to the temperature of 115 K. PL characterization was also utilized to demonstrate the highest crystallinity of the vertical arrays of InP and InGaAs/InP composition-graded heterostructure NWs made by a top-down fabrication method. TEM-related measurements were performed to study the crystal structures and elemental compositions of the Er-compound core-shell NWs. The core-shell NWs consist of an orthorhombic-structured erbium chloride silicate shell and a cubic-structured silicon core. These NWs provide unique Si-compatible materials with emission at 1530 nm for optical communications and solid state lasers.
ContributorsSun, Minghua (Author) / Ning, Cun-Zheng (Thesis advisor) / Yu, Hongbin (Committee member) / Carpenter, Ray W. (Committee member) / Johnson, Shane (Committee member) / Arizona State University (Publisher)
Created2011
Description
Infrared photodetectors, used in applications for sensing and imaging, such as military target recognition, chemical/gas detection, and night vision enhancement, are predominantly comprised of an expensive II-VI material, HgCdTe. III-V type-II superlattices (SLs) have been studied as viable alternatives for HgCdTe due to the SL advantages over HgCdTe: greater control of the alloy composition, resulting in more uniform materials and cutoff wavelengths across the wafer; stronger bonds and structural stability; less expensive substrates, i.e., GaSb; mature III-V growth and processing technologies; lower band-to-band tunneling due to larger electron effective masses; and reduced Auger recombination enabling operation at higher temperatures and longer wavelengths. However, the dark current of InAs/Ga1-xInxSb SL detectors is higher than that of HgCdTe detectors and limited by Shockley-Read-Hall (SRH) recombination rather than Auger recombination. This dissertation work focuses on InAs/InAs1-xSbx SLs, another promising alternative for infrared laser and detector applications due to possible lower SRH recombination and the absence of gallium, which simplifies the SL interfaces and growth processes. InAs/InAs1-xSbx SLs strain-balanced to GaSb substrates were designed for the mid- and long-wavelength infrared (MWIR and LWIR) spectral ranges and were grown using MOCVD and MBE by various groups. Detailed characterization using high-resolution x-ray diffraction, atomic force microscopy, photoluminescence (PL), and photoconductance revealed the excellent structural and optical properties of the MBE materials. Two key material parameters were studied in detail: the valence band offset (VBO) and minority carrier lifetime. The VBO between InAs and InAs1-xSbx strained on GaSb with x = 0.28 - 0.41 was best described by Qv = ÄEv/ÄEg = 1.75 ± 0.03. Time-resolved PL experiments on a LWIR SL revealed a lifetime of 412 ns at 77 K, one order of magnitude greater than that of InAs/Ga1-xInxSb LWIR SLs due to less SRH recombination. MWIR SLs also had 100's of ns lifetimes that were dominated by radiative recombination due to shorter periods and larger wave function overlaps. These results allow InAs/InAs1-xSbx SLs to be designed for LWIR photodetectors with minority carrier lifetimes approaching those of HgCdTe, lower dark currents, and higher operating temperatures.
ContributorsSteenbergen, Elizabeth H (Author) / Zhang, Yong-Hang (Thesis advisor) / Brown, Gail J. (Committee member) / Vasileska, Dragica (Committee member) / Johnson, Shane R. (Committee member) / Arizona State University (Publisher)
Created2012
Description
Many planetary science missions study thermophysical properties of surfaces using infrared spectrometers and infrared cameras. Thermal inertia is a frequently derived thermophysical property that quantifies the ability for heat to exchange through planetary surfaces.
To conceptualize thermal inertia, the diffusion equation analogies are extended using a general effusivity term: the square root of a product of conductivity and capacity terms. A hypothetical thermal inductance was investigated for diurnal planetary heating. The hyperbolic heat diffusion equation was solved to derive an augmented thermal inertia. The hypothetical thermal inductance was modeled with negligible effect on Mars.
Extending spectral performance of infrared cameras was desired for colder bodies in the outer solar system where peak infrared emission is at longer wavelengths. The far-infrared response of an infrared microbolometer array with a retrofitted diamond window was determined using an OSIRIS-REx—OTES interferometer. An instrument response function of the diamond interferometer-microbolometer system shows extended peak performance from 15 µm out to 20 µm and 40% performance to at least 30 µm. The results are folded into E-THEMIS for the NASA flagship mission: Europa Clipper.
Infrared camera systems are desired for the expanding smallsat community that can inherit risk and relax performance requirements. The Thermal-camera for Exploration, Science, and Imaging Spacecraft (THESIS) was developed for the Prox-1 microsat mission. THESIS, incorporating 2001 Mars Odyssey—THEMIS experience, consists of an infrared camera, a visible camera, and an instrument computer. THESIS was planned to provide images for demonstrating autonomous proximity operations between two spacecraft, verifying deployment of the Planetary Society’s LightSail-B, and conducting remote sensing of Earth. Prox-1—THESIS was selected as the finalist for the competed University Nanosatellite Program-7 and was awarded a launch on the maiden commercial SpaceX Falcon Heavy. THESIS captures 8-12 µm IR images with 100 mm optics and RGB color images with 25 mm optics. The instrument computer was capable of instrument commanding, automatic data processing, image storage, and telemetry recording. The completed THESIS has a mass of 2.04 kg, a combined volume of 3U, and uses 7W of power. THESIS was designed, fabricated, integrated, and tested in ASU’s 100K clean lab.
To conceptualize thermal inertia, the diffusion equation analogies are extended using a general effusivity term: the square root of a product of conductivity and capacity terms. A hypothetical thermal inductance was investigated for diurnal planetary heating. The hyperbolic heat diffusion equation was solved to derive an augmented thermal inertia. The hypothetical thermal inductance was modeled with negligible effect on Mars.
Extending spectral performance of infrared cameras was desired for colder bodies in the outer solar system where peak infrared emission is at longer wavelengths. The far-infrared response of an infrared microbolometer array with a retrofitted diamond window was determined using an OSIRIS-REx—OTES interferometer. An instrument response function of the diamond interferometer-microbolometer system shows extended peak performance from 15 µm out to 20 µm and 40% performance to at least 30 µm. The results are folded into E-THEMIS for the NASA flagship mission: Europa Clipper.
Infrared camera systems are desired for the expanding smallsat community that can inherit risk and relax performance requirements. The Thermal-camera for Exploration, Science, and Imaging Spacecraft (THESIS) was developed for the Prox-1 microsat mission. THESIS, incorporating 2001 Mars Odyssey—THEMIS experience, consists of an infrared camera, a visible camera, and an instrument computer. THESIS was planned to provide images for demonstrating autonomous proximity operations between two spacecraft, verifying deployment of the Planetary Society’s LightSail-B, and conducting remote sensing of Earth. Prox-1—THESIS was selected as the finalist for the competed University Nanosatellite Program-7 and was awarded a launch on the maiden commercial SpaceX Falcon Heavy. THESIS captures 8-12 µm IR images with 100 mm optics and RGB color images with 25 mm optics. The instrument computer was capable of instrument commanding, automatic data processing, image storage, and telemetry recording. The completed THESIS has a mass of 2.04 kg, a combined volume of 3U, and uses 7W of power. THESIS was designed, fabricated, integrated, and tested in ASU’s 100K clean lab.
ContributorsVeto, Michael (Author) / Christensen, Philip C (Thesis advisor) / Bell III, Jim (Committee member) / Clarke, Amanda B (Committee member) / Asphaug, Erik (Committee member) / Sariapli, Srikanth (Committee member) / Ruff, Steven (Committee member) / Arizona State University (Publisher)
Created2018
Description
The challenge of radiation therapy is to maximize the dose to the tumor while simultaneously minimizing the dose elsewhere. Proton therapy is well suited to this challenge due to the way protons slow down in matter. As the proton slows down, the rate of energy loss per unit path length continuously increases leading to a sharp dose near the end of range. Unlike conventional radiation therapy, protons stop inside the patient, sparing tissue beyond the tumor. Proton therapy should be superior to existing modalities, however, because protons stop inside the patient, there is uncertainty in the range. “Range uncertainty” causes doctors to take a conservative approach in treatment planning, counteracting the advantages offered by proton therapy. Range uncertainty prevents proton therapy from reaching its full potential.
A new method of delivering protons, pencil-beam scanning (PBS), has become the new standard for treatment over the past few years. PBS utilizes magnets to raster scan a thin proton beam across the tumor at discrete locations and using many discrete pulses of typically 10 ms duration each. The depth is controlled by changing the beam energy. The discretization in time of the proton delivery allows for new methods of dose verification, however few devices have been developed which can meet the bandwidth demands of PBS.
In this work, two devices have been developed to perform dose verification and monitoring with an emphasis placed on fast response times. Measurements were performed at the Mayo Clinic. One detector addresses range uncertainty by measuring prompt gamma-rays emitted during treatment. The range detector presented in this work is able to measure the proton range in-vivo to within 1.1 mm at depths up to 11 cm in less than 500 ms and up to 7.5 cm in less than 200 ms. A beam fluence detector presented in this work is able to measure the position and shape of each beam spot. It is hoped that this work may lead to a further maturation of detection techniques in proton therapy, helping the treatment to reach its full potential to improve the outcomes in patients.
A new method of delivering protons, pencil-beam scanning (PBS), has become the new standard for treatment over the past few years. PBS utilizes magnets to raster scan a thin proton beam across the tumor at discrete locations and using many discrete pulses of typically 10 ms duration each. The depth is controlled by changing the beam energy. The discretization in time of the proton delivery allows for new methods of dose verification, however few devices have been developed which can meet the bandwidth demands of PBS.
In this work, two devices have been developed to perform dose verification and monitoring with an emphasis placed on fast response times. Measurements were performed at the Mayo Clinic. One detector addresses range uncertainty by measuring prompt gamma-rays emitted during treatment. The range detector presented in this work is able to measure the proton range in-vivo to within 1.1 mm at depths up to 11 cm in less than 500 ms and up to 7.5 cm in less than 200 ms. A beam fluence detector presented in this work is able to measure the position and shape of each beam spot. It is hoped that this work may lead to a further maturation of detection techniques in proton therapy, helping the treatment to reach its full potential to improve the outcomes in patients.
ContributorsHolmes, Jason M (Author) / Alarcon, Ricardo (Thesis advisor) / Bues, Martin (Committee member) / Galyaev, Eugene (Committee member) / Chamberlin, Ralph (Committee member) / Arizona State University (Publisher)
Created2019
Description
There has been much debate in the world of academia over the valuation of conglomerates. This thesis proposes the use of the EVA theory in explaining fluctuations in conglomerates’ valuation, and we believe that ROIC, WACC, and ROIC-WACC are three indicators that to a certain extent explain these valuation fluctuations. Through analysis of a sample containing 23 conglomerates, this thesis finds that ROIC, WACC, and ROIC-WACC exhibit positive correlation with valuation fluctuations. In the case study on Fosun, this thesis finds that ROIC-WACC is highly correlated with Fosun’s valuation fluctuations and next with ROIC. Thus this thesis conjectures that for investment companies for which investment capital is derived largely from insurance float, such as Fosun, ROIC-WACC is a better valuation tool.
ContributorsLiang, Xinjun (Author) / Chen, Hong (Thesis advisor) / Pei, Ker-Wei (Thesis advisor) / Zhu, Ning (Committee member) / Arizona State University (Publisher)
Created2015
Description
Optoelectronic and microelectronic applications of germanium-based materials have received considerable research interest in recent years. A novel method for Ge on Si heteroepitaxy required for such applications was developed via molecular epitaxy of Ge5H12. Next, As(GeH3)3, As(SiH3)3, SbD3, S(GeH3)2 and S(SiH3)2 molecular sources were utilized in degenerate n-type doping of Ge. The epitaxial Ge films produced in this work incorporate donor atoms at concentrations above the thermodynamic equilibrium limits. The donors are nearly fully activated, and led to films with lowest resistivity values thus far reported.
Band engineering of Ge was achieved by alloying with Sn. Epitaxy of the alloy layers was conducted on virtual Ge substrates, and made use of the germanium hydrides Ge2H6 and Ge3H8, and the Sn source SnD4. These films exhibit stronger emission than equivalent material deposited directly on Si, and the contributions from the direct and indirect edges can be separated. The indirect-direct crossover composition for Ge1-ySny alloys was determined by photoluminescence (PL). By n-type doping of the Ge1-ySny alloys via P(GeH3)3, P(SiH3)3 and As(SiH3)3, it was possible to enhance photoexcited emission by more than an order-of-magnitude.
The above techniques for deposition of direct gap Ge1-ySny alloys and doping of Ge were combined with p-type doping methods for Ge1-ySny using B2H6 to fabricate pin heterostructure diodes with active layer compositions up to y=0.137. These represent the first direct gap light emitting diodes made from group IV materials. The effect of the single defected n-i¬ interface in a n-Ge/i-Ge1-ySny/p-Ge1-zSnz architecture on electroluminescence (EL) was studied. This led to lattice engineering of the n-type contact layer to produce diodes of n-Ge1-xSnx/i-Ge1-ySny/p-Ge1-zSnz architecture which are devoid of interface defects and therefore exhibit more efficient EL than the previous design. Finally, n-Ge1-ySny/p-Ge1-zSnz pn junction devices were synthesized with varying composition and doping parameters to investigate the effect of these properties on EL.
Band engineering of Ge was achieved by alloying with Sn. Epitaxy of the alloy layers was conducted on virtual Ge substrates, and made use of the germanium hydrides Ge2H6 and Ge3H8, and the Sn source SnD4. These films exhibit stronger emission than equivalent material deposited directly on Si, and the contributions from the direct and indirect edges can be separated. The indirect-direct crossover composition for Ge1-ySny alloys was determined by photoluminescence (PL). By n-type doping of the Ge1-ySny alloys via P(GeH3)3, P(SiH3)3 and As(SiH3)3, it was possible to enhance photoexcited emission by more than an order-of-magnitude.
The above techniques for deposition of direct gap Ge1-ySny alloys and doping of Ge were combined with p-type doping methods for Ge1-ySny using B2H6 to fabricate pin heterostructure diodes with active layer compositions up to y=0.137. These represent the first direct gap light emitting diodes made from group IV materials. The effect of the single defected n-i¬ interface in a n-Ge/i-Ge1-ySny/p-Ge1-zSnz architecture on electroluminescence (EL) was studied. This led to lattice engineering of the n-type contact layer to produce diodes of n-Ge1-xSnx/i-Ge1-ySny/p-Ge1-zSnz architecture which are devoid of interface defects and therefore exhibit more efficient EL than the previous design. Finally, n-Ge1-ySny/p-Ge1-zSnz pn junction devices were synthesized with varying composition and doping parameters to investigate the effect of these properties on EL.
ContributorsSenaratne, Charutha Lasitha (Author) / Kouvetakis, John (Thesis advisor) / Chizmeshya, Andrew (Committee member) / Menéndez, Jose (Committee member) / Arizona State University (Publisher)
Created2016
Description
Understanding the history of water on Mars is one of the highest priority goals of the international Mars exploration community. Water would have played a key role in any potential abiogenesis in the past and will play a key role in the future human exploration of the planet. Chloride salts are an indicator of past hydrologic activity in the Martian geologic record and have the potential to preserve fluid inclusions and organic material within their crystal structure over geologic timescales. This dissertation will describe an innovative method for identifying chloride salts on the Martian surface, explore the implication of their distribution within Early Noachian terrains, and document important opportunistic discoveries made in the process. Decorrelation stretched Thermal Emission Imaging System (THEMIS) infrared images have long been used to identify chloride salts on Mars, but the process has been time-consuming, subjective, and qualitative. By analyzing the entire THEMIS dataset, acquired over more than twenty years at Mars, a globally-applicable covariance matrix was calculated that describes the geologic diversity of the Martian surface. This covariance matrix allows all THEMIS daytime infrared images to be translated into globally-consistent decorrelation stretch and principal component images, enabling an automatic, objective, and quantitative method for identifying chloride salts. A new global survey located 1,605 chloride salt deposits across the Martian surface, a significant increase over previous surveys. In particular, the 257 deposits in Early Noachian terrains have characteristics that indicate they formed contemporaneously with the surrounding terrain. In addition, a chloride salt formation was identified on the floor of Ares Vallis with a unique three-dimensional structure that has been interpreted as an exposed chloride salt diapir, which would indicate the presence of a significant subsurface chloride salt layer. By improving our understanding of the distribution and diversity of chloride salts on the Martian surface, this work has provided future investigators with new tools and avenues of research to explore the history of water on Mars.
ContributorsHill, Jonathon Ryan (Author) / Christensen, Philip R. (Thesis advisor) / Sharp, Thomas G (Committee member) / Ruff, Steven W (Committee member) / Simon, Molly N (Committee member) / O'Rourke, Joseph G (Committee member) / Arizona State University (Publisher)
Created2022
Description
In the upcoming decade, powerful new astronomical facilities such as the James Webb Space Telescope (JWST), the Square Kilometer Array (SKA), and ground-based 30-meter telescopes will open up the epoch of reionization to direct astronomical observation. One of the primary tools used to understand the bulk astrophysical properties of the high-redshift universe are empirically-derived star-forming laws, which relate observed luminosity to fundamental astrophysical quantities such as star formation rate. The radio/infrared relation is one of the more mysterious of these relations: despite its somewhat uncertain astrophysical origins, this relation is extremely tight and linear, with 0.3 dex of scatter over five orders of magnitude in galaxy luminosity. The effects of primordial metallicities on canonical star-forming laws is an open question: a growing body of evidence suggests that the current empirical star forming laws may not be valid in the unenriched, metal-poor environment of the very early universe.
In the modern universe, nearby dwarf galaxies with less than 1/10th the Solar metal abundance provide an opportunity to recalibrate our star formation laws and study the astrophysics of extremely metal-deficient (XMD) environments in detail. I assemble a sample of nearby dwarf galaxies, all within 100 megaparsecs, with nebular oxygen abundances between 1/5th and 1/50th Solar. I identify the subsample of these galaxies with space-based mid- and far-infrared data, and investigate the effects of extreme metallicities on the infrared-radio relationship. For ten of these galaxies, I have acquired 40 hours of observations with the Jansky Very Large Array (JVLA). C-band (4-8 GHz) radio continuum emission is detected from all 10 of these galaxies. These represent the first radio continuum detections from seven galaxies in this sample: Leo A, UGC 4704, HS 0822+3542, SBS 0940+544, and SBS 1129+476. The radio continuum in these galaxies is strongly associated with the presence of optical H-alpha emission, with spectral slopes suggesting a mix of thermal and non-thermal sources. I use the ratio of the radio and far-infrared emission to investigate behavior of the C-band (4-8 GHz) radio/infrared relation at metallicities below 1/10th Solar.
I compare the low metallicity sample with the 4.8 GHz radio/infrared relationship from the KINGFISHER nearby galaxy sample Tabatabaei et al. 2017 and to the 1.4 GHz radio/infrared relationship from the blue compact dwarf galaxy sample of Wu et al. 2008. The infrared/radio ratio q of the low metallicity galaxies is below the average q of star forming galaxies in the modern universe. I compare these galaxies' infrared and radio luminosities to their corresponding Halpha luminosities, and find that both the infrared/Halpha and the radio/H-alpha ratios are reduced by nearly 1 dex in the low metallicity sample vs. higher metallicity galaxies; however the deficit is not straightforwardly interpreted as a metallicity effect.
In the modern universe, nearby dwarf galaxies with less than 1/10th the Solar metal abundance provide an opportunity to recalibrate our star formation laws and study the astrophysics of extremely metal-deficient (XMD) environments in detail. I assemble a sample of nearby dwarf galaxies, all within 100 megaparsecs, with nebular oxygen abundances between 1/5th and 1/50th Solar. I identify the subsample of these galaxies with space-based mid- and far-infrared data, and investigate the effects of extreme metallicities on the infrared-radio relationship. For ten of these galaxies, I have acquired 40 hours of observations with the Jansky Very Large Array (JVLA). C-band (4-8 GHz) radio continuum emission is detected from all 10 of these galaxies. These represent the first radio continuum detections from seven galaxies in this sample: Leo A, UGC 4704, HS 0822+3542, SBS 0940+544, and SBS 1129+476. The radio continuum in these galaxies is strongly associated with the presence of optical H-alpha emission, with spectral slopes suggesting a mix of thermal and non-thermal sources. I use the ratio of the radio and far-infrared emission to investigate behavior of the C-band (4-8 GHz) radio/infrared relation at metallicities below 1/10th Solar.
I compare the low metallicity sample with the 4.8 GHz radio/infrared relationship from the KINGFISHER nearby galaxy sample Tabatabaei et al. 2017 and to the 1.4 GHz radio/infrared relationship from the blue compact dwarf galaxy sample of Wu et al. 2008. The infrared/radio ratio q of the low metallicity galaxies is below the average q of star forming galaxies in the modern universe. I compare these galaxies' infrared and radio luminosities to their corresponding Halpha luminosities, and find that both the infrared/Halpha and the radio/H-alpha ratios are reduced by nearly 1 dex in the low metallicity sample vs. higher metallicity galaxies; however the deficit is not straightforwardly interpreted as a metallicity effect.
ContributorsMonkiewicz, Jacqueline Ann (Author) / Bowman, Judd (Thesis advisor) / Scowen, Paul (Thesis advisor) / Mauskopf, Philip (Committee member) / Scannapieco, Evan (Committee member) / Jansen, Rolf (Committee member) / Arizona State University (Publisher)
Created2018
Description
Several key, open questions in astrophysics can be tackled by searching for and
mining large datasets for transient phenomena. The evolution of massive stars and
compact objects can be studied over cosmic time by identifying supernovae (SNe) and
gamma-ray bursts (GRBs) in other galaxies and determining their redshifts. Modeling
GRBs and their afterglows to probe the jets of GRBs can shed light on the emission
mechanism, rate, and energetics of these events.
In Chapter 1, I discuss the current state of astronomical transient study, including
sources of interest, instrumentation, and data reduction techniques, with a focus
on work in the infrared. In Chapter 2, I present original work published in the
Proceedings of the Astronomical Society of the Pacific, testing InGaAs infrared
detectors for astronomical use (Strausbaugh, Jackson, and Butler 2018); highlights of
this work include observing the exoplanet transit of HD189773B, and detecting the
nearby supernova SN2016adj with an InGaAs detector mounted on a small telescope
at ASU. In Chapter 3, I discuss my work on GRB jets published in the Astrophysical
Journal Letters, highlighting the interesting case of GRB 160625B (Strausbaugh et al.
2019), where I interpret a late-time bump in the GRB afterglow lightcurve as evidence
for a bright-edged jet. In Chapter 4, I present a look back at previous years of
RATIR (Re-ionization And Transient Infra-Red Camera) data, with an emphasis on
the efficiency of following up GRBs detected by the Fermi Space Telescope, before
some final remarks and brief discussion of future work in Chapter 5.
mining large datasets for transient phenomena. The evolution of massive stars and
compact objects can be studied over cosmic time by identifying supernovae (SNe) and
gamma-ray bursts (GRBs) in other galaxies and determining their redshifts. Modeling
GRBs and their afterglows to probe the jets of GRBs can shed light on the emission
mechanism, rate, and energetics of these events.
In Chapter 1, I discuss the current state of astronomical transient study, including
sources of interest, instrumentation, and data reduction techniques, with a focus
on work in the infrared. In Chapter 2, I present original work published in the
Proceedings of the Astronomical Society of the Pacific, testing InGaAs infrared
detectors for astronomical use (Strausbaugh, Jackson, and Butler 2018); highlights of
this work include observing the exoplanet transit of HD189773B, and detecting the
nearby supernova SN2016adj with an InGaAs detector mounted on a small telescope
at ASU. In Chapter 3, I discuss my work on GRB jets published in the Astrophysical
Journal Letters, highlighting the interesting case of GRB 160625B (Strausbaugh et al.
2019), where I interpret a late-time bump in the GRB afterglow lightcurve as evidence
for a bright-edged jet. In Chapter 4, I present a look back at previous years of
RATIR (Re-ionization And Transient Infra-Red Camera) data, with an emphasis on
the efficiency of following up GRBs detected by the Fermi Space Telescope, before
some final remarks and brief discussion of future work in Chapter 5.
ContributorsStrausbaugh, Robert (Author) / Butler, Nathaniel (Thesis advisor) / Jansen, Rolf (Committee member) / Mauskopf, Phil (Committee member) / Windhorst, Rogier (Committee member) / Arizona State University (Publisher)
Created2019